If anyone is interested, I have been using this 'Amzer Convert Micro USB
to Dual Micro USB Twin Y Splitter Charging Handy Data Cable'
(https://amzn.com/B003WUXMW8) for powering my Raspberry Pi /
piCorePlayer / Raspberry Pi display.
21370
just to make you aware of 2 even more expensive options:
http://www.audiophonics.fr/en/boitiers-diy-boitiers-divers/rasptouch-chassis-and-accessories-kit-diy-p-11249.html
and
https://knowhowtec.de/index.php?_route_=en/sonopi-touch.html
I am tempted by the first design, but with all alu kit would
We sell the case separately and ship the template and pin strip for
soldering with it, you just have to tell us which template you want.
However, you can find both 'documentation on the assembly'
(https://www.max2play.com/en/wiki/7-touch-screen-connect-the-gpio/) and
'the templates themselves'
Max2Play wrote:
> Yep, the assembly kit version allows you to use the Digi+ board. We ship
> the bundle with a template for the right holes for the specific board.
> Here is 'the link'
> (https://shop.max2play.com/en/raspberry-pi-2-bundle-7-display.html)
Will you sell the "kit" for the one with
valnar wrote:
> Do you have a case that fits one with the HifiBerry Digi+ board?
In my experience Max2play folks are very obliging and helpful.
Transporter or Cyrus streamX>CyrusDACXP>ESPAudio P09B Active
filter>Cyrus X x 2>Rhapsody, Avondale and Naim cable, Kubuntu 16.10
server, various
Yep, the assembly kit version allows you to use the Digi+ board. We ship
the bundle with a template for the right holes for the specific board.
Here is 'the link'
(https://shop.max2play.com/en/raspberry-pi-2-bundle-7-display.html)
Do you have a case that fits one with the HifiBerry Digi+ board?
valnar's Profile: http://forums.slimdevices.com/member.php?userid=59626
View this thread: http://forums.slimdevices.com/showthread.php?t=104897
Sure, the 'new case'
(https://shop.max2play.com/en/gehause-case-fur-7-raspberry-pi-display-mit-raspberry-pi-und-iqaudio-soundkarte.html)
and the 'old case'
(https://shop.max2play.com/en/zubehor/case-gehaeuse/raspi-case-96.html)
are both also available separately.
Can we buy the case without anything else?
valnar's Profile: http://forums.slimdevices.com/member.php?userid=59626
View this thread: http://forums.slimdevices.com/showthread.php?t=104897
srasher wrote:
> Just FWIW on the shop page of that bundle (touch screen, frame, Pi,
> HifiBerry) there are some more pictures, one of them showing the back
> side. It looks as if you have to drill the holes for the RCA connectors
> into the frame on your own ;-)
>
>
Oh, I didn't realize the GPIO wasn't used for anything other than power.
That would work.
valnar's Profile: http://forums.slimdevices.com/member.php?userid=59626
View this thread:
valnar wrote:
> I started building mine and I have the Hifiberry Digi+. The problem is
> the Digi+ uses the whole GPIO. Is there a solution where I can still
> add the four wires necessary for the 7" LCD, or do I have to strip the
> ends and solder them to the nubs the Digi+ presents?
Would
I started building mine and I have the Hifiberry Digi+. The problem is
the Digi+ uses the whole GPIO. Is there a solution where I can still
add the four wires necessary for the 7" LCD, or do I have to strip the
ends and solder them to the nubs the Digi+ presents?
I was hoping this case from the PiHut would work with the HiFiBerry but
it's a little to shallow so strapped a USB DAC to the back instead :D
20407
+---+
|Filename: IMG_18371.jpg|
I wish he made the Raspberry Pi a little more recessed into the middle
so there would at least be the possibility of hiding the cables. With
the location of the Pi, there is no chance to avoid a couple cables from
protruding.
tjp888 wrote:
> You are correct. Max2play only has a single picture of the frame on
> their site. So it's tough to tell. I have emailed the people at max2play
> asking if their unit will house the additional HiFiBerry DAC (still
> waiting). I think there's a possibility it may as max2play sells
mark wollschlager wrote:
> This one is on backorder, but the only one I can find right now.
> https://www.adafruit.com/products/2033
I have the Pimoroni mentioned here as well. It's a nice piece, but the
legs on the Pimoroni block some access. I found this to be better as far
as room for
So far the max2play 7in case seems to fit the bill, for a price...
http://shop.max2play.com/en/zubehor/raspi-case-93.html
2 Duets controllers, 1 X Boom, 1 X Radio
1 X Receiver + Audioengine A5
1 X Receiver + Yamaha RX-A2000, Polk M70
1 X Receiver + Boston MicroSystem CD
Nexus 7 w/ Squeeze Ctrl
mark wollschlager wrote:
> So far the max2play 7in case seems to fit the bill, for a price...
> http://shop.max2play.com/en/zubehor/raspi-case-93.html
The OP says that he has both a Pi and a DAC. The max2play info is
somewhat sketchy as far as the DAC fitting in propperly, e.g. I don't
see any
tjp888 wrote:
> I just wonder how stable it is when using the touch screen (no
> reviews on this at Newegg)?
Well, FWIW, I've been using the Newegg one for a week and it seems
stable.
John Marshall
Squeezed_Rotel's
Squeezed_Rotel wrote:
> The OP says that he has both a Pi and a DAC. The max2play info is
> somewhat sketchy as far as the DAC fitting in propperly, e.g. I don't
> see any RCA holes cut into the case. This is my concern. I want a case
> that will allow both the Pi as well as the DAC ports.
You
IIRC, the Max2Play Website (shop.max2play.com) sells one but it's quite
pricey.
poing's Profile: http://forums.slimdevices.com/member.php?userid=63617
View this thread: http://forums.slimdevices.com/showthread.php?t=104897
I've searched around, but haven't found an acceptable case that will
house the 7" touchscreen. I have 3 shields (Screen controller, Raspberry
pi, HiFiBerry DAC) so I need about 2" (50mm) depth at a minimum.
tjp888's
This one is on backorder, but the only one I can find right now.
https://www.adafruit.com/products/2033
2 Duets controllers, 1 X Boom, 1 X Radio
1 X Receiver + Audioengine A5
1 X Receiver + Yamaha RX-A2000, Polk M70
1 X Receiver + Boston MicroSystem CD
Nexus 7 w/ Squeeze Ctrl
ReadyNAS 516 LMS
poing wrote:
> IIRC, the Max2Play Website (shop.max2play.com) sells one but it's quite
> pricey.
That's just what I'm looking for.
But, you weren't kidding that it's pricey. I'll keep this in mind if I
can't find anything else, or maybe I'll see if I can slap something
together myself.
This may be an alternative.
https://www.raspberrypi.org/forums/viewtopic.php?f=108=124705=855125#p855125
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
mark wollschlager wrote:
> This one is on backorder, but the only one I can find right now.
> https://www.adafruit.com/products/2033
I am using the frame/stand for the screen (bought along with the
screen), with one of the 'Pibow Audio cases'
(https://shop.pimoroni.com/products/pibow-audio)
27 matches
Mail list logo
