Thank you all for your responses.
After refering logs and logging into console through virsh, seen that there
is no link-local ip even though the link ip address is listed in web
console. there is only 127.0.0.1 configure in ssvm. So where i'm missing.
I'm using basic network, no vlans. only
configured manually link-local ip listed in the web in ssvm with gateway
ip(hypervisor link local ip)
stopped iptables in both hypervisor and ssvm. I can able to ssh. if
iptables is running i can't ssh.
tried adding iso. but not successful.
log shows
[storage.endpoint.DefaultEndPointSelector]
Hi Raj,
You don't have to configure bridges on the host in the first place, as
you pointed out cloudstack does that, check if the version of system
template you have added is correct. As pointed out reboot ssvm once.
The above log is a warning not an error, I am not sure about the
reason
Hi,
while registering iso, registration is successful, but it is not ready for
use. after 20 to 30sec, it vanishes. I've added the http server in global
settings secstorage.allowed.internal.sites. still no luck.
both secodary and console system vms are running.
You'll need to look in the management-server.log on the cloudstack management
server or in the cloud.log at the ssvm (secondary storage VM). Instructions how
to login into the ssvm can be obtained from the documentation (ssh over the
local hypervisor)
In my cases the ssvm did not have enough
Hi raj,
I had the exact problem, what I found was that outbound requests on port
80 were blocked in Secondary Storage VM(ssvm) so I installed a tomcat
server , hosted the template there and then it successfully got added. To
confirm that you have the same error , login to
@cloudstack.apache.org
Sent: Wednesday, October 16, 2013 12:53:12 PM
Subject: Re: could not register iso
Hi raj,
I had the exact problem, what I found was that outbound requests on port
80 were blocked in Secondary Storage VM(ssvm) so I installed a tomcat
server , hosted the template
Did you reboot the SSVM as well ? You might have to do this to take into
affect. Let me know if that resolves it for you.
On 16/10/13 6:22 AM, raj kumar rajkumar600...@gmail.com wrote:
Hi,
while registering iso, registration is successful, but it is not ready for
use. after 20 to 30sec, it
