s tab, add entries for Vnic (vmxnet3) and root &
data disk controllers (osdefault) from the dropdown menu.
2. You would need to have vmtools in the template.
Regards
Thomas
On Wed, 29 Jul 2020, 6:50 am Marc-Andre Jutras,
wrote:
Hey Mike,
On 2020-07-28 3:37 PM, Corey, Mike wrote:
I c
Hey Mike,
On 2020-07-28 3:37 PM, Corey, Mike wrote:
I could use some advice on this. I completely recreated my Window10
VM/Template and imported it into ACS. Deploying an instance runs; however a
couple things are out of the normal and I could use some guidance on
troubleshooting.
1 - The
Sounds like you're reaching a limit somewhere on your cloudstack... (
error from vmware: The task was canceled by a user. )
in your global settings, check for these points and adjust the value: (
set them to -1 for no limit... )
custom.diskoffering.size.max
max.project.primary.storage
Not recommended mainly because it generate some weird routing problem...
from your test, check your routing table on your CVM: Same subnet on
different interfaces... ( eth1 and eth2 )
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
...try:
On your management server, make sure the port TCP 8250 is open and
reachable ( firewall open too )
ssh on your ssvm and run : usr/local/cloud/systemvm/ssvm-check.sh
any errors there ?
howto :
Hey !
I'm currently testing it... looks good so far, I should be able to
finish my test by Friday, I'll keep you posted asap...
quick note: just make sure you compile your ACS 4.11.1 with the latest
nonoss package... ( ie: vim25_65.jar )
everything is available at :
Xenserver...
Many Thanks to all contributors!
It is really amazing to see such good and reactive support from a free maillist.
Best Regards
Francois Scheurer
-Original Message-----
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Thursday, July 21, 2016 8:10 PM
PM, "Marc-Andre Jutras" <mar...@marcuspocus.com> wrote:
which java / tomcat / centos version you're running on ?
On 2016-06-10 3:41 PM, Yiping Zhang wrote:
Hi, all:
We have a cron job to restart mgmt. service once a week. However, after we
upgraded to CS 4.8.0, the cron job would
Hey Francois,
here is some suggestion...
Did you have any load balancer in front of your 3 CSMAN servers? if so,
is there any persistence defined in your configuration ? Can you try to
set it to SourceIP and fix the timeout to something like 60 or 120 min ?
Also validate these points:
make sure the port 8250 is open on your management server ( iptables...
) and reachable from your SSVM...
the SSVM and CVM will use tcp port 8250 to connect on the management
server...
you can also check the logs on the ssvm in /var/log/cloud.log for more
info on why your ssvm cannot
try to upgrade your tomcat to ver 7...
On 2016-06-10 4:10 PM, Yiping Zhang wrote:
RHEL 6.7 / java-1.7.0-openjdk-1.7.0.85-2.6.1.3 / tomcat6-6.0.24-90
On 6/10/16, 12:49 PM, "Marc-Andre Jutras" <mar...@marcuspocus.com> wrote:
which java / tomcat / centos version you're runnin
There's probably another message before this one saying that CS cannot
find a specific interface on Xen...
Make sure your name that you configure in CS match what's in XenServer...
On 2016-06-11 12:19 AM, Josh Davis wrote:
Invocation exception, caused by:
which java / tomcat / centos version you're running on ?
On 2016-06-10 3:41 PM, Yiping Zhang wrote:
Hi, all:
We have a cron job to restart mgmt. service once a week. However, after we
upgraded to CS 4.8.0, the cron job would leave the service stopped and Nagios
starts to page oncall. We
I am using KVM. I've followed the Quick Installation Guide
http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.8/qig.html
2016-06-10 19:50 GMT+02:00 Marc-Andre Jutras <mar...@marcuspocus.com>:
Hey !
Make sure the XenServer you're trying to add is configured your Xen
Hey !
Make sure the XenServer you're trying to add is configured your Xen Pool
before adding it to your Cloudstack cluster...
- open xencenter and connect it on both xenserver : both servers must be
under the same pool, if not, add the missing server to your current pool
and then, you'll be
Hey !
1) install apache or nginx on your management server
2) download the ISO on your management server and place it under the
html or http folder
3) make sure you can see your ISO from a regular http request ( example:
http://management.server.ip.address/my.iso )
3a ) make sure port 80
HI,
That kind of error are normally related to the yum caching repo
try to clear your yum cache then, rebuild it...
1) yum clear all
2) yum update
3) yum -y install cloudstack-management
Marcus
On 2016-06-10 11:31 AM, Cayetano Rodríguez wrote:
I've recently started installing CloudStack
,
Did you recevied my last reply to this email ?
Thank you.
Regards,
Cristian
-Original Message-
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Thursday, June 2, 2016 12:06 AM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP
oute
is not apply at the vpc. If add manually the route works !!! but when reboot
the vpc the route is lose...Can I avoid this behavior ?
Regards
On 06/02/2016 03:11 PM, Marc-Andre Jutras wrote:
Yes it's possible to add manually a route on a VPC but you will lose these
static route if you reboot your
Regards,
Cristian
-Original Message-----
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Thursday, June 2, 2016 12:06 AM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP Class
Thanks for the logs Cristian,
You just forgot to in
Yes it's possible to add manually a route on a VPC but you will lose
these static route if you reboot your VPC or delete / re-create a new one
Instead, try to add your static route in Cloudstack via a private
gateway ...
Marcus
On 2016-06-02 7:20 AM, Gian Paolo Buono wrote:
Hi all,
Is It
to login with default VM password which was set before when
I created this template )
Thank you !
Regards,
Cristian
-Original Message-
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Wednesday, June 1, 2016 8:00 PM
To: users@cloudstack.apache.org
Subject: Re: FW: Password
!!
Regards,
Cristian
-Original Message-
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Wednesday, June 1, 2016 5:07 PM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP Class
Hey !
Ok, At this point
Hi Venkat,
You can also check on your VPC if there's any IPSEC negociation errors
there...
log on your VPC and check in :
/var/log/cloud.log
/var/log/daemon.log
Marcus
On 2016-06-01 9:45 AM, Timothy Lothering wrote:
Hi Venkat,
IPSEC VPN is established with the VPC (in your case the /16).
Message-
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Tuesday, May 31, 2016 6:19 PM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP Class
Hey Cristian
Can you go on the VR and try to run a ping from there ?
procedure on VR
to
never destroy VR? one time i destroyed vr and it took new ip from guest ip
network, so is it safe to destroy VR?
whats your opinions ?
Thanks
2016-05-31 17:38 GMT+03:00 Marc-Andre Jutras <mar...@marcuspocus.com>:
Hey !
personally, I would recommend to run everything on UTC but it's up
,
Cristian
-Original Message-
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Monday, May 30, 2016 9:46 PM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP Class
Hi Cristian,
Sound like a networking issue // gateway
and hypervisors server to UTC for ACS
to work successfully?
Thanks
Tolga
2016-05-30 21:49 GMT+03:00 Marc-Andre Jutras <mar...@marcuspocus.com>:
Make sure NTP is configured and in sync everywhere... ( that's include
your management server, hypervisor, etc... )
On 2016-05-30 7:51 AM, Semih Tolga
Hi Cristian,
Sound like a networking issue // gateway mismatch on your side and not
an issue with ACS: TCP packet seems to be blocked on the border
router... ie: ip on 159.X.X.X network is trying to reach your ACS server
via the 167.X.X.X gateway or vice-versa; VR is not managing two
Hi Cristian ,
check this documentation:
http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.8/hypervisor/vsphere.html
Basically :
1- build and install the ACS Non-oss version on one VM (
https://cwiki.apache.org/confluence/display/CLOUDSTACK/How+to+build+CloudStack
)
check this article...
https://www.rootusers.com/fix-a-cloudstack-instance-stuck-in-an-incorrect-state/
My suggestion: go in the DB and try to modify the state of your faulty
VR / VPC to 'stopped' and delete / destroy the VR / VPC directly on the
hypervisor... after that, try to re-create the
31 matches
Mail list logo