RE: incluide host to Cloudsctack

Hi, If it is a xen/vmware host, first we need to add it in pool either in xencenter or vcenter , then we have to add it in CS. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com

RE: Redundant Router

Hi, Redundant Router is supported only in a zone with advanced networking with Vlan isolation. Also SourceNat is mandatory for RVR. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From:

RE: Upgrading from ACS 4.2 to 4.8 - VR upgrade issue

Check /etc/cloudstack-releases file inside system vms to know the system template version after system vm upgrades. Check MS log to know the reasons for VR upgrade failure. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com

RE: VNC to VM

ssword to access vm as below: virsh dumpxml --security-info | grep vnc -Original Message- From: Sanjeev Neelarapu [mailto:sanjeev.neelar...@accelerite.com] Sent: Thursday, May 26, 2016 6:38 PM To: users@cloudstack.apache.org Subject: RE: VNC to VM Try "virsh console " command on

RE: VNC to VM

Try "virsh console " command on kvm host. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Mohd Zainal Abidin Rabani [mailto:zai...@nocser.net] Sent: Thursday, May 26, 2016 1:33 PM To:

RE: Disk Offering

First we need to create disk offering with type shared and then create disk with this disk offering. Disk will be created on NFS storage. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From:

RE: [ANNOUNCE] Will Stevens as new Apache CloudStack VP

Congratulations Will!! Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Daan Hoogland [mailto:daan.hoogl...@gmail.com] Sent: Thursday, May 19, 2016 2:55 PM To: dev

RE: strength of VPC

Hi Venkatesh, There is no limit on the VM's vpc can connect. We have limit on no.of tiers in a vpc. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Dag Sonstebo

RE: Problem Releasing of Previously Allocated IP Address

:07 | NULL| +-+-++--+-++--+--+-+-+ 7 rows in set (0.00 sec) On Fri, May 13, 2016 at 4:33 PM, Sanjeev Neelar

RE: Problem Releasing of Previously Allocated IP Address

for defaultDns":"x.x.x.5 entry in com.cloud.agent.api.routing.DhcpEntryCommand ? Do you know where Router VM DhcpEntryCommand gets its defaultDns value? Thanks Özhan On Fri, May 13, 2016 at 10:10 AM, Sanjeev Neelarapu < sanjeev.neelar...@accelerite.com> wrote: > You can file a bu

RE: Problem Releasing of Previously Allocated IP Address

different ip address after i destroyed it. I could not delete that C class network there are some active vm's on that network. Thanks Özhan On Thu, May 12, 2016 at 5:21 PM, Sanjeev Neelarapu < sanjeev.neelar...@accelerite.com> wrote: > Router vm gets the same ip address even after d

RE: Template and ISO downloaded but stuck at "installing template / installing ISO"

How do I know if checksum is being passed when registering template/iso? I don't see it on the GUI option. Looking forward to your reply, thank you. Cheers. On Thu, May 12, 2016 at 10:24 PM, Sanjeev Neelarapu < sanjeev.neelar...@accelerite.com> wrote: > Hi, > > Are y

RE: Storagemigration / Primary Storages

Hi Stephan, Once the volume migration is successful then only CS will delete it from the source storage. Please make sure that there are no issues with volume migrations. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com

RE: Template and ISO downloaded but stuck at "installing template / installing ISO"

Hi, Are you passing checksum while registering template/iso? If yes, please check that you are giving valid checksum. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Indra Pramana

RE: Problem Releasing of Previously Allocated IP Address

Router vm gets the same ip address even after destroying and recreating it. Since CS does not have a mechanism to notify the router vm after for existing guest vms it won't change the IP address. ASAIK the IP will be released only after deleting that network. Best Regards, Sanjeev N Chief

RE: change cache option in existing disk offering

Hi Andrei, It is not possible to modify the existing disk offering values. You can create another disk offering with cache option enabled and update the disks with the new offering. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail:

RE: How to change the VLAN ID in database

Hi Venkatesh, Which vlan id you are talking about? If it is related to isolated network, then we have to change in networks table and op_dc_vnet_alloc table. Just curious to know, what is the reason for changing the vlan id in the database? Best Regards, Sanjeev N Chief Product Engineer,

RE: System VMs keeps failing to start

Hi Josh, Since you are using clustered management server with HA, make sure that you have set the global setting parameter "host" to the load balance/virtual IP address. If not, please set , restart management server and destroy system vms. Best Regards, Sanjeev N Chief Product Engineer,

RE: Register ISO

You can copy all the files to secondary storage and try restarting SSVM. It might work Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Mohd Zainal Abidin Rabani

RE: Testing Guest network

Hi Enzo, To isolates if there is any problem with VLANs, you can migrate guest vm and VR to same host and check the gateway(VR) reachability from guest vm. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original

RE: Create Local Storage on Host Cloudstack

After enabling local storage for User VMs at zone level, force reconnect host might as well work. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Prashant Mishra

RE: Unable to attach second disk on CentOS 7 VM

Xen-tools include the required PV drivers and we don't have to download anything for this. Try attach ISO option on a vm from CS UI and you will see xen-tools iso in the drop down list. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail:

RE: Adding a new CloudStack management server

There is no restriction on which interface to use for LB. Make sure you pick the NIC from same network for both the management servers. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From:

RE: VR issue High importance

Hi Venkat, We generally see the following exception when management server is not able to reach the VR: com.cloud.exception.ResourceUnavailableException: Resource [DataCenter:1] is unreachable: Unable to apply userdata and password entry on router There might be some network glitches that

RE: Lock New VM provision on specific HOST

Hi Cristian, As you mentioned, you can avoid host from allocation for new vm deployments by disabling it and it would not affect the existing vms. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original

RE: URGENT - CloudStack agent not able to connect to management server

Adding additional management server would definitely help. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: Indra Pramana [mailto:in...@sg.or.id] Sent: Sunday, April 03, 2016 5:14 PM To:

RE: REMOTE VPN CONNECTION FAILED IN UPGRADED CLOUDSTACK FROM 4.3.1 TO 4.71

Hi Venkatesh, For starting ipsec service use "service ipsecd restart" command , similarly l2tp service. Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com -Original Message- From: kotipalli venkatesh

RE: Password reset, not work after adding new Guest IP Class

Hi Cristian, Can you please check /var/cache/cloud/passwords file in the router vm and see if the CS generated password is present in it with guest vm ip address? Best Regards, Sanjeev N Chief Product Engineer, Accelerite Off: +91 40 6722 9368 | EMail: sanjeev.neelar...@accelerite.com

RE: Storage decommissioning

Hi, Decommissioning of primary storage should not be a problem. Since we can migrate all the disks to additional primary storage in the cluster. Coming to artifacts stored in the secondary storage, if we make the templates as public, all the templates will be available in additional secondary

RE: After upgrade Remotevpn is notworking

Hi Venkatesh, You can follow the xenserver upgrade instructions https://xen-orchestra.com/blog/migrate-from-xenserver-6-2-to-6-5/ to upgrade xs from 6.2 to 6.5 We need to put the host(which will be upgraded) in maintenance mode from Cloudstack. Thanks, Sanjeev -Original Message-

RE: Changing VPC network domain name details

Hi Andrei, You can also try using updateNetwork API if you don’t have cloud monkey setup. -Sanjeev -Original Message- From: ilya [mailto:ilya.mailing.li...@gmail.com] Sent: Thursday, March 17, 2016 2:35 AM To: users@cloudstack.apache.org Subject: Re: Changing VPC network domain name

RE: bash script to create, start, stop and destroy a large number of VM in CloudStack

+1 -Original Message- From: ilya [mailto:ilya.mailing.li...@gmail.com] Sent: Thursday, March 17, 2016 2:31 AM To: users@cloudstack.apache.org Subject: Re: bash script to create, start, stop and destroy a large number of VM in CloudStack +1, looked through the script - looks good. Over

RE: Advanced networking with VLANs under KVM

Hi Chris, Traffic labels that you have specified for each traffic type seems okay. As Paul mentioned, there won’t be access to guest network from system vms. However, you should be able to reach any external network(provided you have access to external network from the gateway) from system vms

RE: IPs Getting Stuck on Multiple Routers

Hi Jeff, This is a known issue and is hypervisor agnostic. -Sanjeev -Original Message- From: Jeff Hair [mailto:j...@greenqloud.com] Sent: Monday, March 14, 2016 10:06 PM To: users@cloudstack.apache.org Subject: IPs Getting Stuck on Multiple Routers Hi, If you disassociate a bunch of

RE: No public network on zone

: Sanjeev Neelarapu Sent: Tuesday, March 8, 15:03 Subject: RE: No public network on zone To: users@cloudstack.apache.org Hi Josh, If you are using advanced zone with vlan isolation you can't use security groups for guest traffic isolation, whereas if you use advanced zone with security groups

RE: No public network on zone

I assign public IPs to the VMs without being able to add them in the guest network form if I can't select the NIC they should be routed via? Thanks On Mon, Mar 7, 2016 at 12:04 AM -0800, "Sanjeev Neelarapu" <sanjeev.neelar...@accelerite.com> wrote: There is no

RE: No public network on zone

From: Sanjeev Neelarapu Sent: Monday, March 7, 13:30 Subject: RE: No public network on zone To: users@cloudstack.apache.org Hi Josh, In Advanced zone with Security Groups public traffic is not supported. Assumption is guest vms will have a routable public IPs. That's why we don't see

RE: No public network on zone

Hi Josh, In Advanced zone with Security Groups public traffic is not supported. Assumption is guest vms will have a routable public IPs. That's why we don't see the option to add public traffic. We can use updatePhysicalNetwork and updateTrafficType APIs for updating zone and traffic types if

RE: Really really confused about Cloudstack networking

Hi Ron, It would be helpful for all the users in the community if you can specify what changes needs to be done for the cloudstack documents to get way with the confusions about the networking. If you specify what problems you have faced while setting up the cloudstack that would also be

RE: Can not deploy system VMs anymore

We found this issue in our testing as well. The reason is template_spool_ref table is not getting updated with correct template_size So we see this error Unable to start instance due to can't find mapping in ObjectInDataStore table for:

RE: HyperV help

Yes , it is possible. But make sure that whatever the IP address that you are going to use as the management ip address in cloudstack does not have any network reachability issues. -Sanjeev -Original Message- From: Partha Goswami [mailto:par...@tulisoft.co.in] Sent: Friday, March 20,

RE: Question regarding virtual routers in a basic network

Hi, With cleanup=false all the rules programmed will be cleaned and reapplied on the VR whereas with cleanup=true VR will be destroyed and recreated with all the rules. If there is only one VR and it is destroyed with VMs running in that network, guest vms will not get any services provided

RE: CS gateway change for public interface

Disable the zone, destroy system vms and change the public address gateway in the physical network public traffic type and enable the zone. System vms will be recreated with new gateway. -Original Message- From: Jochim, Ingo [mailto:ingo.joc...@bautzen-it.de] Sent: Monday, March 09,

RE: Migrate from NFS secondary storage to S3 secondary storage

this? If I understand correctly it should be possible to trigger a migration by perform an operation on all elements stored, correct? -- Erik On Wed, Mar 4, 2015 at 5:38 AM, Sanjeev Neelarapu sanjeev.neelar...@citrix.com wrote: Hi Erik, It is possible to migration from NFS to S3 based

RE: Migrate from NFS secondary storage to S3 secondary storage

Hi Erik, It is possible to migration from NFS to S3 based secondary storage. Existing snapshots and templates won't be moved to S3 immediately. When we perform some operations on these templates/snapshots(e.g.extract template or download snapshot or create template from snapshot ) then they

RE: VNC bind address

Please report a bug in Jira -Sanjeev -Original Message- From: Alexey [mailto:humbugst...@gmail.com] Sent: Monday, March 02, 2015 7:14 PM To: users@cloudstack.apache.org Subject: VNC bind address Hello. The question is regarding VNC bind address of qemu process. I have a multiple

RE: Enabling HA for VM

If you want to enable ha for hosts, you need to do it at cluster lever and has to be done out of cloudstack. -Sanjeev -Original Message- From: raja sekhar [mailto:rajsekhar@gmail.com] Sent: Sunday, March 01, 2015 11:09 AM To: users@cloudstack.apache.org Subject: Re: Enabling HA for

RE: OVS-Tunnels

As of now there is no solution. Please report a bug in Jira. -Original Message- From: Fedi Ben Ali [mailto:ben.ali.fe...@gmail.com] Sent: Saturday, February 28, 2015 7:48 PM To: users@cloudstack.apache.org Subject: OVS-Tunnels Hello, I'm making a cloudsarck deployement with advansed

Re: Fwd: HyperV help

Don't have to modify any files. Try turning off the firewall on your hyperv host and add it again On Feb 21, 2015 11:03 PM, Partha Goswami par...@tulisoft.co.in wrote: hello, I am new in cloudstack. I am trying to configure on Hyper-V agent. I have download 4.3 agent from

RE: VPC Router without NAT (IPv4 or IPv6)

As of now there is no way to disable NAT on VPC router. -Sanjeev -Original Message- From: Adrian Lewis [mailto:adr...@alsiconsulting.co.uk] Sent: Thursday, February 12, 2015 4:58 PM To: users@cloudstack.apache.org Subject: VPC Router without NAT (IPv4 or IPv6) Hi, It’s been asked

RE: New install Virtual router will not stay powered on

Hi Jeff, Please make sure that management server can reach the management/pod cidr you gave in CS. Thanks, Sanjeev Citrix Systems, Inc. -Original Message- From: Jeff Barnett [mailto:jbarn...@prokarma.com] Sent: Saturday, January 31, 2015 6:40 AM To: users@cloudstack.apache.org

RE: Virtual Router Supplying wrong DNS entries

VR will always set its own guest interface ip address as the DNS server in all the CS guest vms. Are you seeing different server being set in resolv.conf ? -Original Message- From: Osay Osman Yuuni [mailto:oyu...@gmail.com] Sent: Sunday, February 01, 2015 8:40 PM To:

RE: cloudstack usage tables are empty

If you are trying MS and usage on the same server and DB on a different server did you specifiy the IP address of the DB server while setting up the database using below command: Cloudstack-setup-databases cloud:password@DB server IP --deploy-as:root:password You must specify the db server ip

RE: Clearing template cache on primary storage

Hi Kyle, CS generally copies the template from secondary to primary if it does not find an entry in the template_spool_ref table for that template. So if you want CS to copy the template to primary every time you deploy a new vm , you can have a script to deploy vms parallelly and to remove

RE: does hosts and managementserver have to be in same subnet?

Hi, Hosts in a pod or cluster must be in the same subnet. In your case is the guest cidr tagged? If yes you need to configure the tagged vlan as native vlan on the switch ports where the hosts are connected. Thanks, Sanjeev -Original Message- From: Tilak Raj Singh

RE: I could not able to stop VM or Reboot in CS 4.2.1

Hi Keerthi, Since the host is in Alert state CS is not able to send commands to stop/reboot the vm to your hypervisor. You can bring the host into Up state before trying vm stop/reboot through CS. -Sanjeev -Original Message- From: Keerthiraja SJ [mailto:sjkeer...@gmail.com] Sent:

RE: VM's not in host report...turning themselves off.

Hi Dave, If the CS does not find the vm in the power report(vm states) it gets from the hypervisor then we see those messages in the log. -Sanjeev -Original Message- From: Dave Dunaway [mailto:dave.duna...@gmail.com] Sent: Monday, January 12, 2015 11:30 PM To:

RE: problem using own shared network offering

Thanks, Jayapal On 12-Jan-2015, at 10:58 AM, Sanjeev Neelarapu sanjeev.neelar...@citrix.com wrote: Hi Stephan, ACS 4.4.2 does not support external DHCP server. -Sanjeev -Original Message- From: Stephan Seitz [mailto:s.se...@secretresearchfacility.com] Sent

RE: problem using own shared network offering

Hi Stephan, ACS 4.4.2 does not support external DHCP server. -Sanjeev -Original Message- From: Stephan Seitz [mailto:s.se...@secretresearchfacility.com] Sent: Friday, January 09, 2015 6:25 PM To: users@cloudstack.apache.org Subject: problem using own shared network offering Hi all,

RE: Copy template

Hi, Please check the content of /var/www/html/copy/.htaccess file in both the zone's ssvm. These files should have Public IP addresses of other zones ssvm's to allow access from each other. Thanks, Sanjeev -Original Message- From: ilya musayev [mailto:ilya.mailing.li...@gmail.com]

RE: deleted host entries still exist in /etc/dhcphost.txt and /etc/hosts on VR

Hi Yiping, Host entries must be deleted from /etc/dhcphosts.txt and /etc/hosts file after destroying vms. Please report a bug for this. -Sanjeev -Original Message- From: Yiping Zhang [mailto:yzh...@marketo.com] Sent: Tuesday, November 25, 2014 3:53 AM To: users@cloudstack.apache.org

RE: Should one create NAT on KVM host?

Hi Dan, No need to create NAT on KVM host. Make sure that on SSVM routes are created properly to reach management server. Thanks, Sanjeev -Original Message- From: Dan Dong [mailto:dongda...@gmail.com] Sent: Friday, November 14, 2014 2:43 AM To: users@cloudstack.apache.org Subject:

RE: Snapshots not working when using S3 (ceph) ACS 4.4.0

Hi, You have followed correct steps in updating the secondary storage from NFS to S3. CS would upload the .vhd created on NFS to S3. What is the size of the snapshot? It it is 5GB can you enable multipart upload and try again? You can find the global setting parameter to enable multipart

RE: Error in creating an instance in xenserver hypervisor

Need complete vm deployment log to understand the issue with deployment. -Original Message- From: In Huishan [mailto:inh...@gmail.com] Sent: Friday, November 07, 2014 4:05 PM To: users@cloudstack.apache.org Subject: Error in creating an instance in xenserver hypervisor Dear All, I have

RE: Network setup questions.

Option 2 should work fine. For ISOs to register you may need to set the global setting parameter allowed.internal.sites to your web server cidr. -Original Message- From: Dan Dong [mailto:dongda...@gmail.com] Sent: Saturday, November 08, 2014 2:32 AM To: users@cloudstack.apache.org

RE: Snapshots not being moved to secondary storage

Hi, The latest snapshot will always remain on primary storage. Size of the volume 20GB may not be the physical size i.e. may be virtual size and 2Gb or 4Gb may be the physical size of the volume. -Sanjeev -Original Message- From: Iurii Miroshnichenko

RE: VR - network throtling rate

Hi Andrija, I think as of now there is no way to apply rate limit just on the Public Network of the VR. If we set rate limit on Guest Network Offering it would apply on both the public and guest network of the VR. Can you please file a bug for this? Thanks, Sanjeev -Original Message-

RE: GRE isolated network: wrong interface?

Hi, Are you using the proper traffic labels for all the traffic types in the physical network? Since you have multiple PIFs on XenServer you must specify traffic labels on zone's physical network for different traffics(guest,management,public and storage) to go through the intended PIFs on

RE: The IP is already used as SourceNat rather than PortForwarding

Hi Martin, Are you trying to configure PF on SourceNAT IP address? If yes can you check whether the conserver mode is set to Yes in your network offering? -Sanjeev -Original Message- From: Martin Emrich [mailto:martin.emr...@empolis.com] Sent: Thursday, October 30, 2014 6:26 PM To:

RE: VPC offer vs Network offer

VPC offering was added in 4.4 to use sdn service in vpc. i.e. implementing networks using GRE tunnels in vpc instead of VLAN based. -Sanjeev -Original Message- From: Andrija Panic [mailto:andrija.pa...@gmail.com] Sent: Sunday, October 26, 2014 2:40 PM To: users@cloudstack.apache.org

RE: Adding OVA or OVF VMs to CS 4.3.1

Jose, You can add the .ova fila as template in CS. -Sanjeev -Original Message- From: José Egas López [mailto:josee...@farmaenlace.com] Sent: Wednesday, September 24, 2014 10:40 PM To: users@cloudstack.apache.org Subject: Adding OVA or OVF VMs to CS 4.3.1 Hi, I have exported an OVA and

RE: Static NAT routing

Hi Venkat, Couple of questions: 1. Are you able to reach the gateway 172.16.10.1 from your desktop? 2. Did you create firewall rules on acquired ip 172.16.10.103 to allow the ingress traffic? You would not need to setup the virtual router as the default gateway. All the guest vms inside the

RE: How to start a guest VM on different host?

Hi, Try using host tagging feature supported by CloudStack. I am not sure whether the tagging will be applicable for already deployed vms. You can give a try. -Sanjeev -Original Message- From: Indra Pramana [mailto:in...@sg.or.id] Sent: Monday, September 22, 2014 7:57 AM To:

RE: Problems with firewall

This looks like a bug to me.When we create a basic zone with network offering DefaultSharedNetworkOffering no security groups should be applied to vms. Please feel free to report a bug. Thanks, Sanjeev -Original Message- From: Jayapal Reddy Uradi [mailto:jayapalreddy.ur...@citrix.com]

RE: Guest networks not created on all Xen hosts in a pool leading to migration failure

Looks like a bug!! -Original Message- From: Pentium100 [mailto:pentium...@gmail.com] Sent: Monday, September 08, 2014 4:05 PM To: users@cloudstack.apache.org Subject: Guest networks not created on all Xen hosts in a pool leading to migration failure Hello, If I create a new network

RE: Removing a single IP in a large range from cloudstack

Hi Justin, You can mark the allocated=now() for the ip address which you want to use outside of cloudstack since there is no single IP remove option from CS. Modifying db would work and CS would never reset it to available again. Thanks, Sanjeev -Original Message- From: Justyn Shull

RE: Template not ready...

Hi, Is SSVM up and running in your setup? If not please bring it up. If it is already running destroy it and MS will create it and once ssvm is up again it will try to download all the templates which are not in ready state. -Sanjeev -Original Message- From: Michael Phillips

RE: VM Storage migration only works once not vice versa CS 4.3 Xen 6.2 SP1

Hi Amin, There are no error messages in the log snippet you have provided. Is the host in the 2nd cluster from which you are trying vm storage migration (2nd time after successful migration) able to mount the primary storage in the cluster1? If not you may have to resolve that issue. Otherwise

RE: Default centos template downloaded / installing/ download in progress

Hi Sandeep, Please restart MS or SSVM so the template download will be triggered again if the template is not in Downloaded state. After this you can remove the stale entries(not in downloaded state) from template_store_ref table. -Sanjeev -Original Message- From: sandeep khandekar

RE: Error while deploying a new VM

Hi Sandeep, In one of your previous emails you mentioned that everything is coming up except VR that means SSVM and CPVM are up? If yes there are no issues with primary and secondary storage mounting on hypervisor. If you have restarted your host to resolve issues please try force reconnect

RE: Stuck with Advanced Networking

Hi Soeren, If we want to create advanced zone with security groups we must choose zone type as advanced and isolation type as security groups in the zone creation wizard(which is the first page in UI once we click on the add zone tab). In advanced zone with security groups all the guest traffic

RE: DNS service on VR not responding

Hi, Can you check if the VR is able to resolve the domain names by pinging from VR ? -Sanjeev -Original Message- From: Vihar [mailto:vih1...@gmail.com] Sent: Monday, July 21, 2014 5:43 AM To: users@cloudstack.apache.org Cc: d...@cloudstack.apache.org Subject: RE: DNS service on VR

RE: CS VR on VMware

Multiple nics for public traffic will be seen on VR if we use public IP addresses from multiple CIDRs(multiple subnets in different vlans) e.g: consume all public IP addresses from one cidr then add another cidr of public ip addresses(in diff vlan) and use them for any of the SNAT/PF/LB

RE: VM live migration with data disk

:15 AM, Sanjeev Neelarapu sanjeev.neelar...@citrix.com wrote: Hi Tejas, Live migration of vms with storage across clusters is supported on Xenserver 6.2 from CS 4.2 onwards. It makes use of xen motion. -Sanjeev -Original Message- From: Tejas Gadaria [mailto:refond.g...@gmail.com

RE: How to change primary storage

: How to change primary storage Thanks for the info.  So how does one configure , My Book Live disk to be used as primary/secondary storage in CS 4.1 or 4.2/3? From: Sanjeev Neelarapu sanjeev.neelar...@citrix.com To: d...@cloudstack.apache.org d

RE: How to change primary storage

Hi Giri, CS 4.1 does not support smfs for primary storage. So you can't add your external disk in your setup. -Sanjeev -Original Message- From: Giri Prasad [mailto:g_p...@yahoo.com.INVALID] Sent: Thursday, July 10, 2014 2:32 PM To: d...@cloudstack.apache.org Cc:

RE: VM live migration with data disk

Hi Tejas, Live migration of vms with storage across clusters is supported on Xenserver 6.2 from CS 4.2 onwards. It makes use of xen motion. -Sanjeev -Original Message- From: Tejas Gadaria [mailto:refond.g...@gmail.com] Sent: Monday, July 14, 2014 10:19 AM To:

Re: recreate iptables rules on hosts

Restart network from cs On Jul 7, 2014 7:22 PM, =?ISO-8859-1?Q?Carlos_Re=E1tegui?= create...@gmail.com wrote: As in service network restart on the hosts or something in the cloudstack UI? On Jul 7, 2014, at 6:06 AM, Sanjeev Neelarapu sanjeev.neelar...@citrix.com wrote: Restart network

RE: recreate iptables rules on hosts

Restart network might help you. -Original Message- From: Carlos Reátegui [mailto:create...@gmail.com] Sent: Monday, July 07, 2014 12:05 PM To: CloudStack-Users Subject: recreate iptables rules on hosts I just upgraded to 4.3 from 4.1. On 4.1 I had disabled iptables on my XenServer

RE: select VPN Customer Gateway error

Hi Suneel, This looks like a bug in an upgraded environment. Can you please file a bug? Thanks, Sanjeev From: Venkata Suneel Babu Mallela [mailto:sunee...@simplifydc.com] Sent: Friday, July 04, 2014 1:45 PM To: users@cloudstack.apache.org Subject: select VPN Customer Gateway error Hi all, I

RE: How to change primary storage

You have to change storage details in both storage_pool and image_store for primary and secondary storages respectively. -Original Message- From: Giri Prasad [mailto:g_p...@yahoo.com.INVALID] Sent: Monday, July 07, 2014 10:20 AM To: Mike Tutkowski; d...@cloudstack.apache.org Cc:

RE: Template Default SystemVM

Make sure that SSVM is up and running. Once the SSVM is up then only we will see the templates status in the UI -Original Message- From: Harikrishna Patnala [mailto:harikrishna.patn...@citrix.com] Sent: Friday, July 04, 2014 11:31 AM To: users@cloudstack.apache.org Subject: Re: Template

RE: Multiple IP in Guest VM

You may need to stop/start the vm for the nic to be created. I am not sure whether nic hot-plugin is supported. -Sanjeev -Original Message- From: Tejas Gadaria [mailto:refond.g...@gmail.com] Sent: Wednesday, June 25, 2014 9:52 AM To: users@cloudstack.apache.org Subject: Re: Multiple IP

RE: template download

We can also restart management server which will trigger template sync . If there are any templates which are not in DOWNLOADED state MS will try to download them again. -Sanjeev -Original Message- From: rohityada...@gmail.com [mailto:rohityada...@gmail.com] On Behalf Of Rohit Yadav

RE: Fails to upload template on Cloudstack

Hi Deepak, Add your ISO server to the global setting parameter secstorage.allowed.internal.sites , restart MS and try again. It should work. Thanks, Sanjeev From: Deepak Yadav [mailto:deepak@gmail.com] Sent: Wednesday, June 11, 2014 1:52 PM To: cloudstack-us...@incubator.apache.org

RE: is there any tutorials for setting up CS using advanced network and KVM hypervisor?

Apache cloudstack Install Admin guides should help you in setting up this environment. -Original Message- From: Yiping Zhang [mailto:yzh...@marketo.com] Sent: Thursday, June 05, 2014 3:00 AM To: users@cloudstack.apache.org Subject: is there any tutorials for setting up CS using

RE: [URGENT] cannot access management server after restarting service

Make sure that tomcat server is running. Please check /var/log/cloudstack/management/catalina.out file for any errors in bringing up tomcat server. -Sanjeev -Original Message- From: ilya musayev [mailto:ilya.mailing.li...@gmail.com] Sent: Tuesday, June 03, 2014 4:02 AM To:

RE: Can user-DomainAmin create his own isolated network without VPC ?

Hi, Any account/domain can create isolated network and not necessarily to be an Admin to create an isolated network. But account of type user (Without admin previleges) can't create any network offering. But can use the existing network offering created by admin to create networks. Thanks,

RE: OVS and GRE Isolation

Hi Sam, Isolation type in Physical network is only applicable for guest traffic. VLAN ID/VNI will be treated as GRE keys if isolation type is GRE. -Sanjeev -Original Message- From: Samuel Winchenbach [mailto:swinc...@gmail.com] Sent: Friday, May 23, 2014 8:12 PM To:

RE: update/shrink guest IP range

, On 22 May 2014 11:21, Sanjeev Neelarapu sanjeev.neelar...@citrix.comwrote: Hi, I thought you wanted to use some IP addresses from the range outside CS. So I asked you to mark few ip addresses as allocated so CS would not pick those IP addresses. What type of networking you are using

  1   2   >