16:05, Bill Shirley wrote:
The server is running on Raid-1 SSDs with 64GB of RAM
I suppose the follow-up question would be are you seeing the swap partition
actually being used?
Does "swapon" show it has been used?
___
users mailing lis
The server is running on Raid-1 SSDs with 64GB of RAM
Bill
On 6/21/2021 3:41 AM, Samuel Sieb wrote:
On 6/20/21 7:25 PM, Bill Shirley wrote:
One of the first things I did after installing F34 is disable swap-on-zram:
touch /etc/systemd/zram-generator.conf
and define a swap partition
One of the first things I did after installing F34 is disable swap-on-zram:
touch /etc/systemd/zram-generator.conf
and define a swap partition in fstab.
Bill
On 6/19/2021 12:45 AM, Stephen Morris wrote:
Hi,
I've noticed when trying remediate performance issues in F34 under a vm, that
I recently migrated a fresh F33 install from a single drive installation to
Raid-1. My eyes
and fingers that did the initial install is over 1,000 miles away.
The initial install:
/ /dev/sda3
/boot /dev/sda2
/swap /dev/sda1
The following is the process I used to migrate the OS to
Back when I migrated to Fedora 24, all the user/group ids changed.
At that time I discovered rsync's --usermap and --groupmap. Its format is:
old_uid:new_username
old_gid:new_groupname
rsync -axAXv --delete --numeric-ids --usermap=400:bob,391:smbguest --groupmap=400:bob,391:smbguest
/2020 11:39 AM, stan via users wrote:
On Thu, 28 May 2020 08:54:41 -0600
Jerry James wrote:
On Thu, May 28, 2020 at 8:36 AM Bill Shirley
wrote:
Build log attached.
It shows that nothing was built. Take a look at the
"Executing(%build)" part. There is a make invocation, followed
-4odq5g
systemd-private-d1e60303890a4d22a4daf097e979ca6f-postfix.service-ZMiyOh
systemd-private-d1e60303890a4d22a4daf097e979ca6f-systemd-logind.service-8WMvzf
Thanks for the replies,
Bill
On 5/28/2020 10:15 AM, stan via users wrote:
On Thu, 28 May 2020 08:32:23 -0400
Bill Shirley wrote:
For years
For years I've installed akmod-xtables-addons with no problems. Not so with
Fedora 32.
It has a build error (excerpt):
[..]
Processing files: kmod-xtables-addons-5.6.12-300.fc32.x86_64-3.9-1.fc32.x86_64
error: Directory not found:
I've never done full disk RAID1. Always, done it with partitions.
fdisk -l /dev/sda (and /dev/sdb) looks like this:
Disklabel type: gpt
Device Start End Sectors Size Type
/dev/sda1 2048 97722367 97720320 46.6G Linux RAID
/dev/sda2 97722368 99809279 2086912
Have a look at /etc/DIR_COLORS which defines the colors for files/directories
for the 'ls' command:
# Attribute codes:
# 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
# Text color codes:
# 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
# Background color
Assuming the subnet is 192.168.0.0/24:
nmap -sP 192.168.0.0/24
should populate the ARP table.
Bill
On 1/31/2020 5:16 PM, Samuel Sieb wrote:
On 1/31/20 1:52 PM, Ed Greshko wrote:
On 2020-02-01 04:56, Samuel Sieb wrote:
I thought about that, but it's only useful for mapping back from the MAC
https://support.mozilla.org/en-US/kb/firefox-dns-over-https
Firefox allows users (via settings) and organizations (*via enterprise policies
and a canary domain lookup*)
to disable DoH when it interferes with a preferred policy.
If you run your own DNS server you can configure the canary
My 70-persistent-net.rules looks like this:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:22:36:97:f9",
ATTR{type}=="1", KERNEL=="eth*", NAME="lan4"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:e0:29:37:0e:78",
ATTR{type}=="1", KERNEL=="eth*",
I don't run FC31 but on all my other Fedora systems, I add net.ifnames=0 to the
kernel
command line /etc/default/grub:
GRUB_CMDLINE_LINUX="rd.md.uuid=41012be5:1df005d4:cfee0bd3:e112219a *net.ifnames=0* rd.shell rd.timeout=65 consoleblank=600
rcu_nocbs=0-15"
Then regenerate the grub menu:
#
You can find out which ports are configured with:
[0:root@c3po selinux]$ semanage port -l | grep dhcpd
dhcpd_port_t tcp 547, 548, 647, 847, 7911
dhcpd_port_t udp 67, 547, 548, 647, 847
There are designated ports in /etc/services:
dhcp-failover
Yes, you need the rsyslog package installed:
[1:root@bb8 rsyslog 148]$ rpm -qf /etc/rsyslog.conf
rsyslog-8.38.0-1.fc27.x86_64
I have all my DHCP logging go to a separate file. To do this, comment out your
log-facility in dhcpd.conf
and add this just after the ' RULES ' comment in
rsync has a --exclude operand (which handles globs):
rsync -axAXv --delete -e "ssh -p 20026" --exclude 'tmp.session/*' --exclude 'documents/*'
/home/webmaster/public_html/server1.example.com/DocumentRoot/ rsync://server2.example.com/backup/
If you rsync'ing locally, you won't need the -e
I turn this on when I'm debugging Rewrite rules:
# Apache 2.4 - rewrite debug - trace0:trace8
RewriteLog /var/log/httpd/rewrite.log
LogLevel rewrite:trace4
Bill
On 3/1/2019 10:08 PM, Todd Zullinger wrote:
Hi,
Alex wrote:
I believe you want to use something like:
What does the share's stanza in smb.conf look like?
Here's one of mine:
[zzmodelrw]
comment = Model for Read/Write shares
path = /lan/shares/zzmodelrw
browseable = yes
guest ok = yes
writeable = no
write list = @smbusers
create mask = 660
I just pushd, popd, dirs all the time. 'dirs -v' is very handy navigating the
stack. I
put and alias in ~/.bashrc:
alias dirs='dirs -v'
[0:root@c3po public_html]$ dirs
0 /home/webmaster/public_html
1 ~/config/apache
2 ~/config/network
3 ~/config/dhcp
To change to the 3rd
It's been my experience that if you want udev to rename interfaces you have to
include in /etc/default/grub:
net.ifnames=0
on the kernel command line to prevent the auto rename that the kernel does:
GRUB_CMDLINE_LINUX="rd.md.uuid=bf821173:4de945af:1f58df6d:74e2fc11 net.ifnames=0
rd.shell
I went through this several months back with a Ryzen and F27. Here are some
links:
https://community.amd.com/thread/225795
https://bugzilla.kernel.org/show_bug.cgi?id=196683
I wound up using ZenStates to fix the problem:
https://github.com/r4m0n/ZenStates-Linux
This service turns off C6 upon
and /dev/sdc2 is ext4.
I guess I woke up grumpy this morning. :-)
Bill
On 3/16/2018 5:55 AM, Gary Stainburn wrote:
On Thursday 15 March 2018 16:34:26 Bill Shirley wrote:
Run:
grub2-install /dev/sda
grub2-install /dev/sdb
Now, you can boot from either drive.
Bill
Hi Bill, Thanks
/boot is on /:
[0:root@elmo raid]$ df
Filesystem Size Used Avail Use% Mounted on
/dev/md2 1.9T 834G 1021G 45% /
/dev/sdc2 3.6T 2.3T 1.4T 63% /bacula
dos partition table (/dev/sdb is the same):
[0:root@elmo raid]$ fdisk -l /dev/sda
Disk /dev/sda: 1.8 TiB, 2000398934016
On 3/15/2018 10:28 AM, Gary Stainburn wrote:
On Thursday 15 March 2018 13:59:39 Juan Martinez wrote:
Hi Gary,
You should use parted instead of fdisk to create the GPT and its
partitions. It should be able to handle larger partitions than fdisk.
Are you using mdadm for the RAID1 array?
I
You've posted very little code. Have you tried looking at the headers? You
must turn on trace:
$soap_options = array(
'trace'=>true
// ,'soap_version'=>SOAP_1_2
// ,'exceptions'=>false
// ,'classmap'=>$classmap
);
$soap_client = new SoapClient($wsdl_url, $soap_options);
I've done this many times but always from root.
With no root account, I would:
1) create a 2nd user 'test', set a password, and make 'test' a sudo user
2) logout and login as 'test'
3) let's say the user to change is 'bob' with id 1000
grep bob /etc/passwd
should yield:
I use a path statement in my [homes] section:
[homes]
comment = Home Directories
path = /home/%u/windows
browseable = no
valid users = %S
writable = yes
guest ok = no
directory mask = 2770
create mask = 660
Just an FYI.
You created
List the [homes] section of testparm. You didn't answer my question about the
missing
path = statement.
You logged in as kasak but the ownership of the created directory is
nobody:nobody. I
don't see how that could happen unless you're using a 'force user' and 'force
group'.
While still
Check for errors in the httpd log file (typically /var/log/httpd/error_log).
So you don't have to enter your credentials every time, create /root/.my.cnf
with
permissions 700:
[client]
user=root
password=hunter2
^^Use the real root password.
Check to see if the install program created any
Why is there no path = statement for [homes]?
Compare the output of 'testparm' from both machines.
After creating the 'foo' directory on both machines, compare the permissions of
the two directories 'ls -l'.
Bill
On 2/12/2018 1:16 PM, Илья Коскин wrote:
Hello everybody. Here is my problem. I
If you have a huge number of addresses that are banned, you should use an
ipset action instead of iptables action.
Bill
On 2/5/2018 3:53 PM, Jeffrey Ross wrote:
Fedora 27 system
Trying to get Fail2ban to work properly on the system and I'm looking for a
good example to follow for the
What's the output of
fdisk -l /dev/sdb
Bill
On 2/5/2018 12:48 PM, Frédéric wrote:
I've been trying to use fatlabel to rename a Western Digital 2TB
USB/external drive. However, the results have been with no success either
with the drive mounted or not.
Much thanks for any advice on how to
You didn't post the command or its output. How can anyone help you?
What's the output of these two commands?
ip -o -4 addr
ip -o -4 route
Bill
On 2/2/2018 11:29 AM, Terry Barnaby wrote:
I tied using "ip route" it had the same effect.
On 02/02/18 14:21, Bill Shirley wrote:
Use 'i
Use 'ip' and add the dev parameter:
ip route add default 173.xxx.yyy.zzz dev ccast
man route:
NOTE
This program is obsolete. For replacement check ip route.
Bill
On 2/2/2018 8:42 AM, Terry Barnaby wrote:
A strange one this. I was trying to change the default route of a machine for
Hawaii-Aleutian
;date.timezone = Pacific/Honolulu ; Hawaii-Aleutian (no DST)
[Session]
session.gc_probability = 5
;session.gc_maxlifetime = 86400 ; 1 day
session.gc_maxlifetime = 172800 ; 2 days
Glad you got it fixed.
Bill
On 1/28/2018 6:45 PM, Emmett Culley wrote:
On 01/26/2018 03:30 AM,
I posted a reply four days ago.
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/thread/LHUCQDLCFP5NK6AQSPNSCOGKRYGKKTID/
Did you try it?
Use mpm_event and php-fpm and .user.ini.
Bill
On 1/25/2018 10:44 AM, Emmett Culley wrote:
On 01/24/2018 05:14 PM, Rick Stevens
I upgraded from Fedora 25 to Fedora 27 and found the upgrade switched
me from mod_php to php-fpm. This means no more php_flag or php_value
in the apache config. You should switch to .user.ini files which work like
.htaccess files:
[0:root@elmo DocumentRoot]$ cat .user.ini
max_execution_time
Does your NAS configuration have a GUI front-end? Perhaps it has a Samba
config template that it applies the GUI changes to to create the actual
smb.conf.
Do you have shell access? Does it have the 'locate' command so that you can
find this template and change it?
Does it have cron running so
I mucked up my / directory one time. Don't remember what the message(s) were
but
I had major problems. ls -lZd / should be:
dr-xr-xr-x. 20 root root system_u:object_r:root_t:s0 261 Jul 7 21:26 /
Bill
On 12/11/2017 6:28 PM, Néstor wrote:
I had that a long time ago and it was permissions but
If you're running rsyslog, try adding this to rsyslog.conf:
# All messages on last terminal
*.* /dev/tty12
Switch to tty12 (Ctrl+Alt+F2) to see all messages.
Bill
On 12/3/2017 8:18 PM, Ed Greshko wrote:
On 12/04/17 09:01, Alex wrote:
Hi,
On Sun, Dec 3, 2017 at 4:53 PM, Ed Greshko
Yes, a symlink you mentioned will probably work for him.
From the link you posted:
|sudo systemctl edit --full nginx.service |
This will load the current unit file into the editor, where it can be modified. When the editor exits, the changed file will be
written to |/etc/systemd/system|,
:
On 26.11.2017 18:45, Bill Shirley wrote:
I don't know why, but it doesn't seem to be working for him. From an
earlier post:
sudo systemctl enable openvpn-client@ibecker2.service
Failed to enable unit: Unit file openvpn-client@ibecker2.service does not
exist.
Yes, i have read the earlier post too
I don't know why, but it doesn't seem to be working for him. From an earlier
post:
sudo systemctl enableopenvpn-client@ibecker2.service
Failed to enable unit: Unit fileopenvpn-client@ibecker2.service does not
exist.
Bill
On 11/26/2017 10:44 AM, Ulf Volmer wrote:
On 26.11.2017 16:07, Bill
An explanation of systemd template files:
https://fedoramagazine.org/systemd-template-unit-files/
For you, you should:
cp -a /usr/lib/systemd/system/openvpn-client@.service
/etc/systemd/system/openvpn-client@ibecker2.service
systemctl daemon-reload
systemctl start
That link is for something different. It's automatically created by the
systemctl enable command. I have one too:
[0:root@elmo ~]$ ls -lZ
/etc/systemd/system/multi-user.target.wants/openvpn@server.service
lrwxrwxrwx. 1 root root system_u:object_r:systemd_unit_file_t:s0 42 Jul 17 2015
ic OpenVPN connection on
system start
*This step requires that you set up automatic login from the previous step.
https://hide.me/en/vpnsetup/fedora/openvpn/
On Wed, Nov 22, 2017 at 5:50 PM, Bill Shirley
<bshir...@memphis.apirx.biz> wrote:
Is the .service file in /etc/systemd/system ?
[0:root@elmo ~
Is the .service file in /etc/systemd/system ?
[0:root@elmo ~ 2]$ ls -lZ /etc/systemd/system/openvpn@server.service
-rw-r--r--. 1 root root system_u:object_r:systemd_unit_file_t:s0 148 Aug 6
2015 /etc/systemd/system/openvpn@server.service
Of course yours would be openvpn@client-ibecker2.service
I ran into this on Fedora 25.
https://www.spinics.net/linux/fedora/fedora-users/msg479030.html
I'm not running php-fpm.service.
Bill
On 11/21/2017 7:24 PM, Rick Stevens wrote:
On 11/21/2017 03:27 PM, Samuel Sieb wrote:
On 11/21/2017 02:59 PM, Florian Sievert wrote:
If I remember correctly,
Here's Fedora 22's setup:
[0:root@elmo joe]$ cat /etc/redhat-release
Fedora release 22 (Twenty Two)
[0:root@elmo joe]$ grep -i sock /etc/my.cnf /etc/my.cnf.d/*
/etc/my.cnf.d/mariadb-server.cnf:socket=/var/lib/mysql/mysql.sock
[0:root@elmo joe]$ locate mysql.sock
/var/lib/mysql/mysql.sock
HTH,
And you're just going to let your geese remain unordered?!
(Haven't had my coffee yet or my meds :-) )
Bill
On 11/7/2017 10:57 AM, Beartooth wrote:
On Sun, 05 Nov 2017 21:31:01 +0100, Silvia Sánchez wrote:
You're aware that F27 isn't stable yet, right?
Fully aware, yes, thanks!
About a month ago when I ran 'dnf update', it updated apache and I ran into
problems with PHP.
httpd-2.4.27-3.fc25.x86_64
php-7.0.23-1.fc25.x86_64
I had to switch from mpm_prefork_module to mpm_event_module in 00-mpm.conf
for PHP to work correctly.
Then with that change, I found that PHP's
So your ipset is not getting created or has been deleted by
another jail if it shares the same name.
With fail2ban-client -d, look at your sshd jail, specifically the
['set', 'sshd', 'action', 'my_ipset_ip', 'name', 'IPv4-ip']
make sure the name is different that all the other jails. (Disregard
Looks like your ipset wasn't created or something caused it to be deleted.
ipset v6.29: The set with the given name does not exist
Do you find the named ipset with: ipset -L -n
Also, your default action (firewallcmd-allports.conf) doesn't use ipset. Somehow
your jail is using
Have you looked at overriding it in the systemd unit file?
I use this for mariadb (/etc/systemd/system/mariadb.service):
.include /usr/lib/systemd/system/mariadb.service
[Service]
#LimitNOFILE=infinity
LimitNOFILE=65536
LimitMEMLOCK=infinity
Bill
On 9/21/2017 6:55 PM, Peter Boy wrote:
When
The trouble with the instructions:
# ausearch -c 'sddm-helper' --raw | audit2allow -M my-sddmhelper # semodule -X
300 -i my-sddmhelper.pp
is the 1st time it can fail on file 'open'. When you do the above and
'open' is allowed but then get shot down when your program tries
to 'write',
are not getting ANY updates. They are not getting a new kernel. They are not getting security updates. They are not getting
"maintained".
They ARE being maintained. It's possible to update some rpms without updating
the release:
Just a couple of my servers:
[0:root@apinetstore2 ~]$ cat /etc/redhat-release
Fedora release 21 (Twenty One)
[0:root@apinetstore2 ~]$ uptime
02:18:00 up 949 days, 17:08, 1 user, load average: 0.21, 0.41, 0.44
[0:root@elvis ~]$ cat /etc/redhat-release
Fedora release 16 (Verne)
[0:root@elvis
address.
My guess is that your dhcpd is not running.
Bill
On 9/7/2017 10:15 PM, JD wrote:
On 09/07/2017 01:31 PM, Bill Shirley wrote:
On 9/6/2017 3:46 PM, JD wrote:
Hi,
My em1 is config'ed as:
ifconfig em1 inet 10.10.10.1 up netmask 0xff00
The wifi is connected to and internet and working OK
If the device doesn't get an address, you're still before the
iptables/forwarding stage.
Look in your log files for DHCP messages.
Bill
On 9/6/2017 3:46 PM, JD wrote:
Hi,
My em1 is config'ed as:
ifconfig em1 inet 10.10.10.1 up netmask 0xff00
The wifi is connected to and internet and
-c, --count
Suppress normal output; instead print a count of matching
processes. When count does not match any‐
thing, e.g. returns zero, the command will return non-zero value.
Looks like you would want to use the --count flag instead of piping to wc:
I just recently build a spec file for ndppd (NDP Proxy Daemon) and found out
you can't comment out by using a single # in a spec file if it is a % command.
It has to be like this:
#%%configure
ndppd: https://github.com/DanielAdolfsson/ndppd
Do not build rpm's as root. Set up a build tree using
Arrg, forgot to say change 25 to 26 and iftop to gedit.
Bill
On 7/14/2017 8:20 PM, Bill Shirley wrote:
You could try updating gedit before you upgrade the system to Fedora 26. Here's
what I did to upgrade iftop:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-25-$(uname -i)
dnf --releasever
You could try updating gedit before you upgrade the system to Fedora 26. Here's
what I did to upgrade iftop:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-25-$(uname -i)
dnf --releasever=25 update iftop
If the update doesn't bring in a bazillion files, then you should let it
finish. You
You might have a look at your partition layout: fdisk -l /dev/sda
Also, your UEFI motherboard could be booting in legacy BIOS mode.
A couple of months back, I had to re-arrange a borked Debian install. This is a
4 TB Western Digital Black drive on a UEFI motherboard:
[0:root@TUX ~]$ fdisk -l
[0:root@elmo dhcp]$ rpm -qa | grep dnf | sort
dnf-1.1.6-2.fc22.noarch
dnf-conf-1.1.6-2.fc22.noarch
dnf-langpacks-0.15.1-1.fc22.noarch
dnf-langpacks-conf-0.15.1-1.fc22.noarch
dnf-plugins-core-0.1.19-1.fc22.noarch
dnf-yum-1.1.6-2.fc22.noarch
python-dnf-1.1.6-2.fc22.noarch
On 2017-06-20 I did a 'dnf update' on my server. The update threw some errors
and
when I did a 'reboot' with the new kernel (vmlinuz-4.11.5-200.fc25.x86_64) it
failed without
giving me a command prompt. So, I booted my previous kernel
(4.10.17-200.fc25.x86_64).
I got a login prompt and
A little more info.
/etc/sysctl.d/99-mystuff.conf:
#define KERN_EMERG"<0>" /* system is unusable */
#define KERN_ALERT"<1>" /* action must be taken immediately */
#define KERN_CRIT "<2>" /* critical conditions */
#define KERN_ERR "<3>" /* error
How about:
find . -type f -name '*.dat' -delete
-type f will make sure you don't delete directories.
Bill
On 2/12/2017 2:43 PM, Stephen Morris wrote:
On 11/02/2017 22:24, bruce wrote:
Hi.
Test file with a name of:
67.205.168.80_PID.dat
find . -name '*.dat' -exec ls {} \;
displays the file
On 12/5/2016 4:17 PM, Tim wrote:
Generally speaking, files to be served from /var/www/html are served as
files owned by the author, with world-readable permissions (Apache reads
files as "other" users.
example.html -rwr--
rw- Owner readable and writable, for you to work with your files.
Why didn't you try it? It works for me.
I spent my time trying to help and you dismissed it
WITHOUT reason.
Not cool.
Bill
On 9/8/2016 12:32 PM, Alex wrote:
Hi,
Now do this:
cd /path/to/joomla/DocumentRoot
chmod -R apache:apache $rw_dirs
find $rw_dirs -type d -exec chmod 2770 {} \;
find
Put the service file back the way it was.
It's best if you can identify which directories Joomla needs write access to
limit exposure.
For Wordpress it's
/path/to/wordpress/DocumentRoot/wp-content/{plugins,themes,upgrade,uploads} so:
rw_dirs="plugins themes upgrade uploads"
if you can't
On 2/22/2016 1:50 PM, Ranjan Maitra wrote:
On Mon, 22 Feb 2016 10:38:30 -0800 Rick Stevens wrote:
On 02/22/2016 10:19 AM, Ranjan Maitra wrote:
Hi,
I am running a fully updated F23 box but this question does not have much to do
with Fedora itself, hence the
On 1/25/2016 10:35 PM, Tim wrote:
Allegedly, on or about 25 January 2016, Greg Woods sent:
(I can't remember how to get a dump of the zone, but I remember doing
it in the past.
Simply stopping the nameserver ought to cause it to reconcile its
records on file. That's what I do when I've
Google for 'usb modem':
https://www.google.com/search?q=usb+modem=utf-8=utf-8
Gets it power from USB. I've used these before.
Bill
On 1/26/2016 4:56 AM, Gary Stainburn wrote:
I've just had to replace my Hylafax server as the cooling fan in the rack case
has died and could not be replaced.
Try:
cp /etc/DIR_COLORS ~/.dir_colors
edit ~/.dir_colors and make your changes.
implement changes:
eval `dircolors -b ~/.dir_colors`
test your changes:
ls -l
Here's the changes I found most useful for green text on black background:
RESET 0 # reset to "normal" color
DIR 01;37 #
[0:root@elmo shorewall]$ grep trouble /etc/{passwd,group}
/etc/passwd:setroubleshoot:x:990:300::/var/lib/setroubleshoot:/sbin/nologin
/etc/group:setroubleshoot:x:300:
[0:root@elmo ~]$ rpm -qf /var/lib/setroubleshoot/setroubleshoot_database.xml
setroubleshoot-server-3.2.24-1.fc22.x86_64
HTH,
I tried a lot of things but finally saw in the rdsosreport.txt that the kernel
was seeing the array but refusing to use it. It was several months ago so
that's
about all I remember.
Bill
On 10/4/2015 5:01 PM, Alex wrote:
Hi,
I ran into this or something similar. My system would boot fine
I ran into this or something similar. My system would boot fine on
an older kernel but fail on a new oue. Can't remember which one worked
and which didn't. The solution I found was remove the bitmap, re-boot on
the newer kernel, and add the bitmap back.
# remove
mdadm --grow --bitmap=none
Put this at the bottom of /etc/chrony.conf:
# comment out allow and noclientlog above
# my stuff
allow 10.0.0.0/8
allow 192.168.0.0/16
allow 172.16.0.0/12
broadcast 60 192.168.4.255
broadcast 60 192.168.6.255
(You may not want the broadcast statements).
then: systemctl restart chrony.service
On 7/18/2015 7:08 PM, Alex wrote:
Hi,
Since upgrading from fedora22, auditd is drowning /var/log/messages
with useless information such as this:
Jul 18 19:02:19 orion audit: audit-2404 pid=6002 uid=0
auid=4294967295 ses=4294967295 msg='op=destroy kind=server
Maybe it's looking for the autoconfig file wpad.dat and not finding it.
dhcpd.conf
option local-pac-server code 252 = text;
option local-pac-server http://wpad.example.com:80/wpad.dat;;
Bill
On 3/18/2015 12:51 PM, Gary Stainburn wrote:
Hi folks,
While looking at my network I've
The OP was talking about running a centralized proxy. Put this in /etc/profile or /etc/inputrc (can't remember which)
per machine.
Sorry not to have spelled it out.
Bill
On 11/18/2014 4:22 AM, Cameron Simpson wrote:
On 18Nov2014 02:31, Bill Shirley bshir...@memphis.apirx.biz wrote:
You
You can put this in your ~/.bashrc:
export http_proxy=http://127.0.0.1:3128;
export ftp_proxy=ftp://127.0.0.1:3128;
I'm not sure how many utilities use it but I think wget does.
Bill
On 11/16/2014 8:18 AM, Alexis Jeandet wrote:
Le 15/11/2014 07:17, Tim a écrit :
On Fri, 2014-11-14 at 13:55
On 10/24/2014 11:45 AM, Bill Davidsen wrote:
I have a complex firewall setup running on an older version of Fedora, and I'd like to upgrade to RHEL7 or recent
Fedora. Unfortunately, I can't really do what I need using firewalld, so two questions:
1 - has anyone done this and were there any
What does 'ls -l /dev/sd*' say?
Have you tried 'tune2fs -l /dev/sdc3' (if there is one)? That should give you
the UUID.
Bill
On 10/8/2014 8:00 PM, Junk wrote:
Well if it's not lvm that leaves raid, luks encrypted partitions, docker or using an ssd as a cache for a magnetic
disk. dm-raid,
On 5/13/2014 8:59 PM, CLOSE Dave wrote:
On 05/13/2014 05:39 PM, Russell Miller wrote:
I want to run the same software on all of these machines and
having inconsistent names /between/ the machines makes that next to
impossible. Using the new names means that my software has to learn
all those
On 1/24/2014 7:18 AM, Roger wrote:
Using Fedora 19, Drupal, PHP, ruby, Rails, etc.fully updated.
Apache died again for me today and I do not understand why. It has not
done this for some time.
I develop in Drupal, and Rails 4 mainly.
I have a test index.html file in /var/www/html all the
Replying to myself for completeness. There is a fix:
https://bugzilla.redhat.com/show_bug.cgi?id=846053
Bill
On 11/4/2012 10:57 PM, Bill Shirley wrote:
Notice the timeout value is wrong in the ipset created below:
[root@moses bin]# rpm -q ipset
ipset-6.11-1.fc17.x86_64
[root@moses bin
Notice the timeout value is wrong in the ipset created below:
[root@moses bin]# rpm -q ipset
ipset-6.11-1.fc17.x86_64
[root@moses bin]# ipset x HTTPhacker
[root@moses bin]# ipset create HTTPhacker hash:ip timeout 86400
[root@moses bin]# ipset list HTTPhacker
Name: HTTPhacker
Type: hash:ip
On 10/23/2012 6:52 PM, Digimer wrote:
Yes, you need a corresponding 'ifcfg-dev' file to match the udev.d's
NAME=dev value. Do not use the ifcfg-dev's 'HWADDR=...' though.
I started using the NAME parameter in Fedora 16. ifcfg-lan:
NAME=lan
TYPE=Ethernet
ONBOOT=yes
On 10/16/2012 4:27 AM, Reindl Harald wrote:
Am 16.10.2012 04:58, schrieb JD:
I googled this and came across 2 purported
solutions, neither of which worked.
1. Uninstall package biosdevname and reboot.
That did not prevent udevd from renaming eth0 to em1.
2. Add the line
biosdevname=0
to
On 10/16/2012 2:16 PM, Joe Zeff wrote:
On 10/16/2012 11:13 AM, Bill Shirley wrote:
PS. See how cool I am? I said boxen and interwebz. :-)
Well, you were right up to the point where you pointed it out. Sorry,
but you're still just a PFY.
But..., but..., I use da cloud and program Web 2.0
On 10/15/2012 1:02 PM, JD wrote:
On 10/13/2012 05:53 AM, Reindl Harald wrote:
Am 13.10.2012 13:46, schrieb Frank Murphy:
How can I completly remove all remnants of an old eth1
Everytime I go to add a new nic it wants to call it eth1
I will be replacing the old nic with ano identical
Check in /etc/udev/rules.d/70-persistent-net.rules
Bill
On 10/13/2012 7:46 AM, Frank Murphy wrote:
How can I completly remove all remnants of an old eth1
Everytime I go to add a new nic it wants to call it eth1
I will be replacing the old nic with ano identical chipped card,
which it wants to
misunderstand how iptables
or tcpdump work.
On 10/4/2012 4:52 PM, Bill Shirley wrote:
Check your listen statement in /etc/httpd/conf/httpd.conf. It
should be:
Listen 8080
If that is correct, run tcpdump (ctrl+c to quit) and then try
externally connecting :
tcpdump -n -i eth0 port 80 or port 8080
On 10/5/2012 3:18 AM, Mark Space wrote:
On 10/4/2012 11:27 PM, NOSpaze wrote:
On Thu, 2012-10-04 at 15:00 -0700, Mark Space wrote:
I tried this with tcpdump running on the server. It surprised me
when I
saw tcpdump respond. Firefox still says cannot connect from an
external workstation,
Check your listen statement in /etc/httpd/conf/httpd.conf. It should be:
Listen 8080
If that is correct, run tcpdump (ctrl+c to quit) and then try externally
connecting :
tcpdump -n -i eth0 port 80 or port 8080
If you get traffic on port 8080 then you have an iptables problem.
Bill
On
On 9/20/2012 5:02 AM, Zdenek Pytela wrote:
Arthur Dent pise:
Well sadly no joy...
# yum install clamav-scanner-systemd
# systemctl enable clamd.scan.service
Failed to issue method call: No such file or directory
Just for the record: there are differences between f16 and f17, the
On 9/19/2012 5:47 AM, Arthur Dent wrote:
What tells it that it is a scan service? That bit of the puzzle seems
to be missing...
Whatever is the parameter after the @ and before the dot becomes %i in
the service file. Look at the service file:
[Unit]
Description = clamd scanner (%i) daemon
1 - 100 of 117 matches
Mail list logo