Rich,
https://fedorahosted.org/389/ticket/47642
Thanks
Alberto Viana
On Fri, Dec 13, 2013 at 3:55 PM, Rich Megginson rmegg...@redhat.com wrote:
On 12/13/2013 10:43 AM, Alberto Viana wrote:
Rich,
The behavior is a little bit different and I will try to explain:
version:
On Wed, 2013-12-18 at 00:52 +, Patrick O'Callaghan wrote:
On Tue, Dec 17, 2013 at 7:23 PM, Jonathan Ryshpan
jonr...@pacbell.net wrote:
I'm interested in a replacement for cron which would allow me
to run various cron jobs on demand, and mark them as having
been
On 12/18/2013 12:43 AM, Jonathan Ryshpan wrote:
*
If I can replace /cron/ with /at/ and get the desired result, I'll be happy.
You may want to consider using batch instead, running the command as
part of setting up your login session. This will start the backup when
the load average drops
Upgraded my Dell XPS 14z laptop from F19 to F20 last night using
fedup. Everything went smoothly and within an hour I was happily using
F20. Probably the smoothest upgrade I've seen between two versions of
Fedora (and I've been using Fedora for ten years).
Thanks to everyone who put time and
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840 PRO) and was
wondering about best practices for Over Provisioning during partitioning.
According to Samsung docs (
http://www.samsung.com/global/business/semiconductor/minisite/SSD/us/html/about/whitepaper05.html
)
*With the
Dave Cross ha scritto / said the followingil giorno/on 18/12/2013 10:21:
Upgraded my Dell XPS 14z laptop from F19 to F20 last night using
fedup. Everything went smoothly and within an hour I was happily using
F20. Probably the smoothest upgrade I've seen between two versions of
Fedora (and
Greetings,
I'm testing gmvault (http://gmvault.org/) a gmail backup tool, on fedora 17
x86_64.
I have followed all the instructions (enable the app, change gmail
settings etc) in the install page:
http://gmvault.org/gmail_setup.html
However, the program aborts with the python error below,
On Wed, 18 Dec 2013 11:11:49 +0100
M. Fioretti mfiore...@nexaima.net wrote:
Greetings,
I'm testing gmvault (http://gmvault.org/) a gmail backup tool, on
fedora 17 x86_64.
I have followed all the instructions (enable the app, change gmail
settings etc) in the install page:
Quoting Chris Murphy li...@colorremedies.com:
On Dec 17, 2013, at 1:46 PM, Chris Murphy li...@colorremedies.com wrote:
[ 118.522477] PM: Syncing filesystems ... done.
[ 118.986063] Freezing user space processes ... (elapsed 0.005
seconds) done.
[ 119.045554] Freezing remaining freezable
when I want to poweroff/reboot the machine I get this message:
a stop job is running for User Manager for 42
and it takes a very long time to stop
Sometimes I get a similar message for CUPS printing
Any idea??
--
Antonio M
Skype: amontag52
Linux Fedora F20 (Heisenbug) on Acer 5720
I am getting ready for a new install to f20 (currently still lagging
behind on f17). I attached a 2TB USB drive, stopped MOST tasks (firefox
with 16 open windows, a few terminals some running SSH, and VNC), and
ran the following:
$ rsync -ah --stats ./
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840 PRO) and
was wondering about best practices for Over Provisioning during
partitioning.
hmmm. I just ordered a Crucial M500 256GB SSD for my new install. I
thought I would
2013/12/18 Robert Moskowitz r...@htt-consult.com
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840 PRO) and
was wondering about best practices for Over Provisioning during
partitioning.
hmmm. I just ordered a Crucial
On 12/18/2013 08:15 AM, John Obaterspok wrote:
2013/12/18 Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840
PRO) and was wondering about
On 12/18/2013 08:15 AM, John Obaterspok wrote:
2013/12/18 Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840
PRO) and was wondering about
This is for an i386 install (Asus Eee900)
I have a local repo with the os and the updates.
I added -url=http://repo.homebase.home.htt/fedora/20/os/i386/ but this
did not impact the install start, but I was able to select this on the
Installation summary page using Installation source. But on
I did not find where I can really customize the software install. I can
select Gnome 3 and a few packages, but I cannot specifically remove and
add packages. Or at least I did not see a customize install button.
Perhaps it was off my screen? The ASUS is a little short, but
Alt-mouse did
On 12/18/2013 06:56 AM, Robert Moskowitz wrote:
$ rsync -ah --stats ./ /run/media/rgm/6XW1484R/lx120e.htt/rgm/backup-131218
Number of files: 30174
Number of files transferred: 25251
Total file size: 34.93G bytes
Total transferred file size: 34.93G bytes
Literal data: 34.93G bytes
Matched data:
On 12/18/2013 04:38 PM, Robert Moskowitz wrote:
Also discourages using LVM. I have often wondered why I use LVM on my
notebooks; I don't see the gain over just plain EXT4 partitions. I
have read a number of articles and I can't find any solid advantage.
Well, I dont have a notebook, but a
On 12/18/2013 10:05 AM, Robert Nichols wrote:
On 12/18/2013 06:56 AM, Robert Moskowitz wrote:
$ rsync -ah --stats ./
/run/media/rgm/6XW1484R/lx120e.htt/rgm/backup-131218
Number of files: 30174
Number of files transferred: 25251
Total file size: 34.93G bytes
Total transferred file size:
Hi,
Following up on this post, it appears that the F20 duplicates have been
downloaded but not installed. I tried removing the duplicates using
https://franx47.wordpress.com/2013/02/01/removing-duplicate-rpm-packages/
but the error message is that the duplicates are downloaded but not
On 12/18/2013 10:15 AM, Mihamina RKTMB wrote:
On 12/18/2013 04:38 PM, Robert Moskowitz wrote:
Also discourages using LVM. I have often wondered why I use LVM on
my notebooks; I don't see the gain over just plain EXT4 partitions.
I have read a number of articles and I can't find any solid
ERRORS in UPdating on Fedora 18 . I have quite a number of updates but I
keep getting these errors and preventing updates.
What do these ERRORS mean ?
Dependency Resolution Errors:
Package: ffmpeg-libs_1.1-1.1.5-2.el6.i686 (linuxtech-release)
Requires: libcv.so.2.0Package:
On Wed, Dec 18, 2013 at 9:38 AM, Robert Moskowitz r...@htt-consult.comwrote:
On 12/18/2013 10:15 AM, Mihamina RKTMB wrote:
On 12/18/2013 04:38 PM, Robert Moskowitz wrote:
Also discourages using LVM. I have often wondered why I use LVM on my
notebooks; I don't see the gain over just plain
On Wed, 18 Dec 2013 10:44:20 -0500, Jim wrote:
ERRORS in UPdating on Fedora 18 . I have quite a number of updates but I
keep getting these errors and preventing updates.
What do these ERRORS mean ?
You've added an incompatible package repository called linuxtech-release,
which offers rpms
After running
fedup --device --network 20
I got
WARNING: problems were encountered during transaction test:
broken dependencies
libreoffice-pdfimport-1:4.1.3.2-12.fc19.x86_64 requires
poppler-0.22.1-5.fc19.x86_64
libreoffice-core-1:4.1.3.2-12.fc19.x86_64 requires
Hi
On Wed, Dec 18, 2013 at 11:24 AM, Steven Stern
subscribed-li...@sterndata.com wrote:
After running
fedup --device --network 20
I got
WARNING: problems were encountered during transaction test:
broken dependencies
libreoffice-pdfimport-1:4.1.3.2-12.fc19.x86_64 requires
On 12/18/2013 10:26 AM, Rahul Sundaram wrote:
Hi
On Wed, Dec 18, 2013 at 11:24 AM, Steven Stern
subscribed-li...@sterndata.com mailto:subscribed-li...@sterndata.com
wrote:
After running
fedup --device --network 20
I got
WARNING: problems were encountered
Just updated f19-f20. Now resume from suspend is broken.
First tried with nvidia blob. On resume just got blank screen. Could switch
vt, but couldn't wake up display.
Then removed nvidia back to nouveau. This time, on resume I just see the fedora
boot splash. Cannot get any response to
On Wed, Dec 18, 2013 at 12:56 PM, Robert Moskowitz r...@htt-consult.comwrote:
Plus I would like rsync to report how long it actually took to run. I
can't find an option for that.
man time
poc
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hey guys. - subject says it all!!
For a basic centos/fedora install. Need to have
pointers/docs/suggestions/solid steps to actually harden/secure a
system.
I've looked at a bunch of different articles/sites, so I'm also turning here.
Also, are there any good (i know) security lists/resources
On 12/18/2013 11:00 AM, Michael Schwendt wrote:
On Wed, 18 Dec 2013 10:44:20 -0500, Jim wrote:
ERRORS in UPdating on Fedora 18 . I have quite a number of updates but I
keep getting these errors and preventing updates.
What do these ERRORS mean ?
You've added an incompatible package
As it in not common to be hacked on linux, and linux is really strong after
install, perhaps you could specify a little under what conditions you were
hacked. Was a physical intrusion? communicational? software? a web page? an
open service or port? an injection? stolen passwd? Normally, hacking
Hi.
Got an old FC system that was hacked. - I know - my own fault
(perhaps) should have updated, etc,,,
The system is vital, need to extract all/as much of the files from the
700G drive as possible. I'm going to blow away the corrupt system,
replacing the system with centos 6.5.
On the
Well here comes the questions on 'where is it now'. Of course since I
skipped f18 f19, these may be 'old' issues
So with gedit, where 'preferences'? I need to turn off line wrap so I
can use it to edit various config files. Meanwhile, back to vi.
--
users mailing list
HI
What version of gedit are you using?
Marvin
On Wed, Dec 18, 2013 at 9:49 AM, Robert Moskowitz r...@htt-consult.comwrote:
Well here comes the questions on 'where is it now'. Of course since I
skipped f18 f19, these may be 'old' issues
So with gedit, where 'preferences'? I need
On 12/18/2013 09:05 AM, bruce issued this missive:
Hey guys. - subject says it all!!
For a basic centos/fedora install. Need to have
pointers/docs/suggestions/solid steps to actually harden/secure a
system.
I've looked at a bunch of different articles/sites, so I'm also turning here.
Also,
See comments inline.
On 12/18/2013 12:49 PM, bruce wrote:
Hi.
Got an old FC system that was hacked. - I know - my own fault
(perhaps) should have updated, etc,,,
How do you know you were hacked?
The system is vital, need to extract all/as much of the files from
the 700G drive as
On 12/18/2013 12:55 PM, Marvin Kosmal wrote:
HI
What version of gedit are you using?
Wow! They also hid the about tab! and no /root/install.log and
/var/log/yum.log only has what has occured since install! So how DO I
find out what versin of gedit f20 base install is running
I
On 12/18/2013 01:20 PM, Robert Moskowitz wrote:
Wow! They also hid the about tab! and no /root/install.log and
/var/log/yum.log only has what has occured since install! So how DO I
find out what versin of gedit f20 base install is running
I think the dumbing down has gone a bit too
On Dec 18, 2013, at 4:25 AM, Robert P. J. Day rpj...@crashcourse.ca wrote:
just catching up here and have to admit i'm out of my comfort
zone ... is it safe to say that all of this represents an actual
bug/issue and i wasn't doing anything imbecilic earlier?
Correct.
as in,
when i was
On Dec 18, 2013, at 6:03 AM, Robert Moskowitz r...@htt-consult.com wrote:
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840 PRO) and was
wondering about best practices for Over Provisioning during partitioning.
hmmm.
On Wed, 2013-12-18 at 12:49 -0500, Robert Moskowitz wrote:
Well here comes the questions on 'where is it now'. Of course since I
skipped f18 f19, these may be 'old' issues
So with gedit, where 'preferences'? I need to turn off line wrap so I
can use it to edit various config files.
On 12/18/2013 01:25 PM, Tim Evans wrote:
On 12/18/2013 01:20 PM, Robert Moskowitz wrote:
Wow! They also hid the about tab! and no /root/install.log and
/var/log/yum.log only has what has occured since install! So how DO I
find out what versin of gedit f20 base install is running
I
Hi Mark,
Thanks for the reply. 'ppreciate it.
Basically, I'll be able to keep the corrupted system up/running,
offline for a bit, so I'll be able to (more or less) really be able to
see/recall what apps/functions are running, or should be running.
And I'll be keeping a copy of the drive in a
On Dec 18, 2013, at 8:15 AM, Mihamina RKTMB miham...@rktmb.org wrote:
On 12/18/2013 04:38 PM, Robert Moskowitz wrote:
Also discourages using LVM. I have often wondered why I use LVM on my
notebooks; I don't see the gain over just plain EXT4 partitions. I have
read a number of articles
On 12/18/2013 01:32 PM, Chris Murphy wrote:
On Dec 18, 2013, at 6:03 AM, Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com wrote:
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new SSD disk (256gb Samsung 840 PRO)
and was wondering
During install I did not find a dialog to set my host name (FQDN).
Somehow it picked up what I like for host, but the domain part it is
picking up from dhcp of the subnet I was on during the install. I want
to force the whole fqdn regardless of where I am.
I did go through the network
On Wed, Dec 18, 2013 at 11:16 AM, Robert Moskowitz r...@htt-consult.com wrote:
During install I did not find a dialog to set my host name (FQDN). Somehow
it picked up what I like for host, but the domain part it is picking up from
dhcp of the subnet I was on during the install. I want to force
On Dec 18, 2013, at 8:50 AM, Richard Shaw hobbes1...@gmail.com wrote:
This makes even less sense for a laptop, but lets look at a desktop
situation. Sure you could add a second disk, add it to your volume group, add
space to your LV, and resize your filesystem to use it. One problem
On 12/18/2013 10:20 AM, Robert Moskowitz wrote:
So how DO I find out what versin of gedit f20 base install is running
yum list installed gedit
HTH HAND.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On Dec 18, 2013, at 5:11 AM, antonio montagnani antonio.montagn...@alice.it
wrote:
when I want to poweroff/reboot the machine I get this message:
a stop job is running for User Manager for 42
and it takes a very long time to stop
Sometimes I get a similar message for CUPS printing
Any
Chris Murphy ha scritto / said the followingil giorno/on 18/12/2013
20:48:
On Dec 18, 2013, at 5:11 AM, antonio montagnani antonio.montagn...@alice.it
wrote:
when I want to poweroff/reboot the machine I get this message:
a stop job is running for User Manager for 42
and it takes a very
On Wed, 18 Dec 2013, bruce wrote:
Hi.
Got an old FC system that was hacked. - I know - my own fault
(perhaps) should have updated, etc,,,
[snip]
I can't tell you how to restore because it's impossible to know what the intrusion was,
what was done, and how you know what was or was not
On 12/18/2013 02:35 PM, Steven Rosenberg wrote:
On Wed, Dec 18, 2013 at 11:16 AM, Robert Moskowitz r...@htt-consult.com wrote:
During install I did not find a dialog to set my host name (FQDN). Somehow
it picked up what I like for host, but the domain part it is picking up from
dhcp of the
Where did bluetooth support go in F20?
Under F19, I had a bluetooth icon in the notification area and there was
blueman to manage bluetooth devices.
Yum tells me blueman has been obsoleted and replaced by BlueZ in F20,
but I can't find any menu item related to Bluetooth.
There is a program
On Dec 18, 2013, at 11:50 AM, Robert Moskowitz r...@htt-consult.com wrote:
On 12/18/2013 01:32 PM, Chris Murphy wrote:
On Dec 18, 2013, at 6:03 AM, Robert Moskowitz r...@htt-consult.com wrote:
On 12/18/2013 04:41 AM, John Obaterspok wrote:
Hello,
I'm going to setup F20 with a new
On Wed, 2013-12-18 at 14:02 -0600, Steven Stern wrote:
Where did bluetooth support go in F20?
Under F19, I had a bluetooth icon in the notification area and there was
blueman to manage bluetooth devices.
Yum tells me blueman has been obsoleted and replaced by BlueZ in F20,
but I can't
On Wed, 2013-12-18 at 14:02 -0600, Steven Stern wrote:
Where did bluetooth support go in F20?
Under F19, I had a bluetooth icon in the notification area and there was
blueman to manage bluetooth devices.
Yum tells me blueman has been obsoleted and replaced by BlueZ in F20,
but I can't
On 12/18/2013 02:18 PM, bitlord wrote:
On Wed, 2013-12-18 at 14:02 -0600, Steven Stern wrote:
Where did bluetooth support go in F20?
Under F19, I had a bluetooth icon in the notification area and there was
blueman to manage bluetooth devices.
Yum tells me blueman has been obsoleted and
On 12/18/2013 03:09 PM, Chris Murphy wrote:
On Dec 18, 2013, at 11:50 AM, Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com wrote:
On 12/18/2013 01:32 PM, Chris Murphy wrote:
On Dec 18, 2013, at 6:03 AM, Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com
On 12/18/2013 12:28 PM, Steven Stern wrote:
And, it won't
work with XFCE.
This may be DE specific; you might want to check at the official Xfce
forum, http://forum.xfce.org/index.php and see what they have to say.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change
On Dec 18, 2013, at 1:38 PM, Robert Moskowitz r...@htt-consult.com wrote:
My Lenovo x120e supposedly has the sata3 chipset, but only sata2 enabled.
According to a few forums that I found when looking for what type of drive to
buy for this laptop. Some think the sata2 option is to upsell
On 12/18/2013 02:42 PM, Joe Zeff wrote:
On 12/18/2013 12:28 PM, Steven Stern wrote:
And, it won't
work with XFCE.
This may be DE specific; you might want to check at the official Xfce
forum, http://forum.xfce.org/index.php and see what they have to say.
I just rebooted into Gnome and I
On 12/18/2013 02:42 PM, Joe Zeff wrote:
On 12/18/2013 12:28 PM, Steven Stern wrote:
And, it won't
work with XFCE.
This may be DE specific; you might want to check at the official Xfce
forum, http://forum.xfce.org/index.php and see what they have to sa
I've got it working now in Gnome, so
On 12/18/2013 03:44 PM, Chris Murphy wrote:
On Dec 18, 2013, at 1:38 PM, Robert Moskowitz r...@htt-consult.com wrote:
My Lenovo x120e supposedly has the sata3 chipset, but only sata2 enabled.
According to a few forums that I found when looking for what type of drive to
buy for this laptop.
On Dec 18, 2013, at 1:59 PM, Robert Moskowitz r...@htt-consult.com wrote:
On 12/18/2013 03:44 PM, Chris Murphy wrote:
On Dec 18, 2013, at 1:38 PM, Robert Moskowitz r...@htt-consult.com wrote:
My Lenovo x120e supposedly has the sata3 chipset, but only sata2 enabled.
According to a few
On Wed, 18 Dec 2013 19:42:35 +0100
bitlord wrote:
(just as example), but probably should have some fallback solution on
NONgnome-shell desktops
I'm pretty sure it does. When I run GTK apps under FVWM, they actually
get buttons in the app itself where they belong. Yet another reason
to run as
On 12/19/13 03:57, Robert Moskowitz wrote:
Yes. I have notes on this, and did the change. But past installs let me set
it at install time via a dialog prompt. That is what I am asking about.
Where did it get moved to???
It was taken out and, as explained, moved to a post-install
On Wed, 18 Dec 2013 14:57:22 -0500
Robert Moskowitz wrote:
Yes. I have notes on this, and did the change. But past installs let
me set it at install time via a dialog prompt. That is what I am asking
about. Where did it get moved to???
Well obviously it is down in the network
On Dec 18, 2013, at 2:05 PM, Chris Murphy li...@colorremedies.com wrote:
You can check this with dmesg, find the SATA device note
node!
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
On 12/18/2013 01:07 PM, Tom Horsley wrote:
On Wed, 18 Dec 2013 19:42:35 +0100
bitlord wrote:
(just as example), but probably should have some fallback solution on
NONgnome-shell desktops
I'm pretty sure it does. When I run GTK apps under FVWM, they actually
get buttons in the app itself where
On 12/18/2013 04:08 PM, Ed Greshko wrote:
On 12/19/13 03:57, Robert Moskowitz wrote:
Yes. I have notes on this, and did the change. But past installs let me set
it at install time via a dialog prompt. That is what I am asking about. Where
did it get moved to???
It was taken out and, as
On 12/18/2013 04:09 PM, Chris Murphy wrote:
On Dec 18, 2013, at 2:05 PM, Chris Murphy li...@colorremedies.com wrote:
You can check this with dmesg, find the SATA device note
node!
Tomorrow
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription
On 12/18/2013 04:21 PM, Dan Thurman wrote:
On 12/18/2013 01:07 PM, Tom Horsley wrote:
On Wed, 18 Dec 2013 19:42:35 +0100
bitlord wrote:
(just as example), but probably should have some fallback solution on
NONgnome-shell desktops
I'm pretty sure it does. When I run GTK apps under FVWM, they
OK. Now I am getting really bummed out.
I want TREEs, not places. Can't seem to do that.
Where is my menu on top?
OK. cntl-l works to get a copyable location.
And that advise that gedit is managed via appmenu? I suspect Nautilus
is too, but can't find the tool
--
users mailing
Common rootkits that exploit weaknesses of old systems. I'd say it's
enough to keep updated systems. If want some more hardening, close
opened ports, use a firewall or iptables, create a DMZ, use strong
passwords, disable unneeded services.
Re included the list. There are people who reads the
Mate is a fork of Gnome2. I use it and like it a lot.
2013/12/18 Robert Moskowitz r...@htt-consult.com
On 12/18/2013 04:21 PM, Dan Thurman wrote:
On 12/18/2013 01:07 PM, Tom Horsley wrote:
On Wed, 18 Dec 2013 19:42:35 +0100
bitlord wrote:
(just as example), but probably should have
On 12/18/2013 05:20 PM, Dennis Kaptain wrote:
Mate is a fork of Gnome2. I use it and like it a lot.
This is selectable at install? I will most likely try again tomorrow...
2013/12/18 Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com
On 12/18/2013 04:21 PM, Dan
On 12/19/13 05:30, Robert Moskowitz wrote:
On 12/18/2013 04:08 PM, Ed Greshko wrote:
On 12/19/13 03:57, Robert Moskowitz wrote:
Yes. I have notes on this, and did the change. But past installs let me
set it at install time via a dialog prompt. That is what I am asking
about. Where did
On 12/18/2013 05:43 PM, Ed Greshko wrote:
On 12/19/13 05:30, Robert Moskowitz wrote:
On 12/18/2013 04:08 PM, Ed Greshko wrote:
On 12/19/13 03:57, Robert Moskowitz wrote:
Yes. I have notes on this, and did the change. But past installs let me set
it at install time via a dialog prompt.
Anyone know how to get latest gnome to believe the DPI
setting and not blow up 12pt fonts to gigantic
proportions?
OK, found a bugzilla with some useful info I can try:
https://bugzilla.gnome.org/show_bug.cgi?id=709859
I also see there is a magic EDID override I can use on
the kernel command
On Wed, Dec 18, 2013 at 2:20 PM, Dennis Kaptain
dennis.kapt...@gmail.com wrote:
Mate is a fork of Gnome2. I use it and like it a lot.
I'd roll Mate, Xfce and LXDE onto the box to see what you like.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription
I see in
http://docs.fedoraproject.org/en-US/Fedora/20/html/Installation_Guide/index.html
sec 8.1.4 that I am suppose to add:
repo=http://fqdn/os/i386/ to the install command (pressing tab at boot
time). My notes for f17 was to use url=
But how to specify the updates repo?
when I edited the yum.repos.d files to point to my local repos, I got
the following error doing a yum update:
Error: Package: gnutls-utils-3.1.17-3.fc20.i686 (updates)
Requires: libopts.so.25
You could try using --skip-broken to work around the problem
You could try running: rpm
On 12/18/2013 06:16 PM, Steven Rosenberg wrote:
On Wed, Dec 18, 2013 at 2:20 PM, Dennis Kaptain
dennis.kapt...@gmail.com wrote:
Mate is a fork of Gnome2. I use it and like it a lot.
I'd roll Mate, Xfce and LXDE onto the box to see what you like.
Only a 16GB SSD on this ASUS ee900. Kind of
Hello,
I use a 3G+ usb key to connect to the internet.
I originally configured the key.
Where can I find the configuration file?
Thank
===
Patrick DUPRÉ | | email: pdu...@gmx.com
On 12/18/2013 02:20 PM, Dennis Kaptain wrote:
Mate is a fork of Gnome2. I use it and like it a lot.
2013/12/18 Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com
On 12/18/2013 04:21 PM, Dan Thurman wrote:
On 12/18/2013 01:07 PM, Tom Horsley wrote:
On Wed, 18
On 12/18/2013 12:44 PM, Steven Stern wrote:
On 12/18/2013 02:42 PM, Joe Zeff wrote:
On 12/18/2013 12:28 PM, Steven Stern wrote:
And, it won't
work with XFCE.
This may be DE specific; you might want to check at the official Xfce
forum, http://forum.xfce.org/index.php and see what they have to
I guess to each their own.cuz I happen to LIKE Gnome 3!.LoL!
- Reply message -
From: Dan Thurman d...@cdkkt.com
To: users@lists.fedoraproject.org
Subject: What to try instead of gnome - Re: f20 - gedit
Date: Wed, Dec 18, 2013 7:32 pm
On 12/18/2013 02:20 PM, Dennis Kaptain
wrote:
On 12/18/2013 07:50 PM, eoconno...@gmail.com wrote:
I guess to each their own.cuz I happen to LIKE Gnome 3!.LoL!
If I could config it easier. What is the app to change behaviour in
apps like gedit?
- Reply message -
From: Dan Thurman d...@cdkkt.com
To:
On Mon, Dec 16, 2013 at 7:46 PM, Jonathan Ryshpan jonr...@pacbell.net wrote:
The current versions of thunderbird and thunderbird-lightning, namely
* thunderbird-24.2.0-2
* thunderbird-lightning-2.6.2-3
don't seem to be compatible.
I believe an update was pushed to F19 today to fix
On 12/18/2013 06:49 PM, Joe Zeff wrote:
On 12/18/2013 12:44 PM, Steven Stern wrote:
On 12/18/2013 02:42 PM, Joe Zeff wrote:
On 12/18/2013 12:28 PM, Steven Stern wrote:
And, it won't
work with XFCE.
This may be DE specific; you might want to check at the official Xfce
forum,
http://docs.fedoraproject.org/en-US/Fedora/20/html/Release_Notes/sect-Release_Notes-Changes_for_Desktop.html#sect-Desktop
The F20 release notes say that to install E17, one does
yum install @enlightenment
but
sudo yum install @enlightenment
Loaded plugins: langpacks, refresh-packagekit
I installed 32 and 64 bit Fedora 20 virtual machines at work
today, using VNC video (since I have an old server that doesn't
know anything about spice).
After the install, on the first run the gnome setup tool
runs to ask a few questions about keyboard, cloud, etc.
In the VNC client, a black
On Wed, 18 Dec 2013 18:24:07 -0500, Robert Moskowitz wrote:
when I edited the yum.repos.d files to point to my local repos, I got
the following error doing a yum update:
Error: Package: gnutls-utils-3.1.17-3.fc20.i686 (updates)
Requires: libopts.so.25
# repoquery
Hi all,
Twice today I've had my system lock up hard when my ssh session
failed. In both cases, the mouse pointer moved still, but I couldn't
corner bump or even do ctrl + alt + f2/f3/f4 to get a terminal window.
My setup is a fresh install (not an upgrade) of stock Fedora 20
x86_64,
The F20 release notes say that to install E17, one does
yum install @enlightenment
Yes, that might be a typo, just leave off the @ sign, e.g. yum install
enlightenment I have it installed here and it works very nicely.
--
Bryce Hardy
--
users mailing list
users@lists.fedoraproject.org
Hi
On Wed, Dec 18, 2013 at 10:40 PM, Bryce Hardy wrote:
The F20 release notes say that to install E17, one does
yum install @enlightenment
Yes, that might be a typo, just leave off the @ sign, e.g. yum install
enlightenment I have it installed here and it works very nicely.
It is
1 - 100 of 105 matches
Mail list logo