On 09/03/2014 08:46 AM, Demeter Tibor wrote:
Hi,
Firstly, I don't want make an import domain. I just want to make a vm with same
parameters (disk size,ram, etc) then replace the disk images with our original
disks.
on which storage type (iscsi or nfs)?
Tibor
- Eredeti üzenet -
Dear All,
Can any one help me with steps to increase Heap size in Ovirt engine.
Regards,
Chandrahasa S
From: Liran Zelkha lzel...@redhat.com
To: Chandrahasa S chandrahas...@tcs.com
Cc: emes...@redhat.com, Oved Ourfali ov...@redhat.com,
users@ovirt.org
Date: 09/02/2014 11:49 AM
On Sep 2, 2014, at 21:03 , Nir Soffer nsof...@redhat.com wrote:
- Original Message -
From: Michal Skrivanek mskri...@redhat.com
To: Liron Aravot lara...@redhat.com, Dan Kenigsberg
dan...@redhat.com, Federico Simoncelli
fsimo...@redhat.com, Vinzenz Feenstra vfeen...@redhat.com
Cc:
Edit the ENGINE_HEAP_MIN, ENGINE_HEAP_MAX parameters in the ovirt-engine.conf
file
- Original Message -
From: Chandrahasa S chandrahas...@tcs.com
To: Liran Zelkha lzel...@redhat.com
Cc: emes...@redhat.com, Oved Ourfali ov...@redhat.com, users@ovirt.org
Sent: Wednesday, September 3, 2014
I'd just like to add a note that this problem is not directly related
with the fact that it's hosted engine.
--Jirka
On 09/02/2014 01:36 PM, James Clarke wrote:
Might as well admit to fixing it myself. SSH'd to the host and saw that
this share was mounted. Forced an umount and now the host
Hi,
We're going to start composing oVirt 3.4.4 RC on *2014-09-09 08:00 UTC* from
3.4 branch.
Maintainers:
- Please be sure that 3.4 snapshot allow to create VMs before *2014-09-08 15:00
UTC*
- Please be sure that no pending patches are going to block the release before
*2014-09-08 15:00 UTC*
-
Hi,
We were suppposed to start composing oVirt 3.5.0 RC2 today from 3.5 branch,
however we still have blockers open so we should postpone the build.
We'll discuss the delay and blockers status during today oVirt sync meeting.
Maintainers:
- Please be sure that 3.5 snapshot satisfy release
Hi All,
We are using the /api/vm/ID/start function to start the virtual machine but
it seems the vm is start in the run once mode. We want to start the vm in
the Run mode rather than the run once, How can we do this ? Is there any
other option to start the vm in the run mode ? it is possible from
On 09/03/2014 10:12 AM, Shanil S wrote:
Hi All,
We are using the /api/vm/ID/start function to start the virtual machine
but it seems the vm is start in the run once mode. We want to start the
vm in the Run mode rather than the run once, How can we do this ? Is
there any other option to
On shared glusterfs.
Tibor
- Eredeti üzenet -
On 09/03/2014 08:46 AM, Demeter Tibor wrote:
Hi,
Firstly, I don't want make an import domain. I just want to make a vm with
same parameters (disk size,ram, etc) then replace the disk images with our
original disks.
on which
Hi Juan,
Okay.. Thanks.. Its working now.. :)
--
Regards
Shanil
On Wed, Sep 3, 2014 at 1:44 PM, Juan Hernandez jhern...@redhat.com wrote:
On 09/03/2014 10:12 AM, Shanil S wrote:
Hi All,
We are using the /api/vm/ID/start function to start the virtual machine
but it seems the vm is
About libgovirt
===
libgovirt is a GObject-based library to access oVirt REST API. It uses
GObject and librest to integrate well with GNOME applications.
News
Changes since 0.3.0:
- Handle cookies set by the oVirt instance in order to have some
'persistant' authentication
On 09/03/2014 11:14 AM, Demeter Tibor wrote:
On shared glusterfs.
Allon/Federico - I remember on NFS, qcow2 isn't used by default, since
raw is sparse by default.
(but i don't remember if it won't work, or just not enabled by default).
can one create a qcow2 disk for a VM with gluster
I'll guess, but:
Isn't this overwritten on upgrades of ovirt-engine?
Am 03.09.2014 08:53, schrieb Liran Zelkha:
Edit the ENGINE_HEAP_MIN, ENGINE_HEAP_MAX parameters in the ovirt-engine.conf
file
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH
Am 03.09.2014 12:50, schrieb Itamar Heim:
Allon/Federico - I remember on NFS, qcow2 isn't used by default, since
raw is sparse by default.
(but i don't remember if it won't work, or just not enabled by default).
can one create a qcow2 disk for a VM with gluster storage?
Sorry for hijacking
On Tue, Sep 02, 2014 at 10:07:34PM +0200, Grzegorz Szypa wrote:
I think that it works, but still I do not see statistics in report portal.
But general is good now.
Which version of oVirt is it? Which version of Vdsm is running on your
hypervisor?
Could you run `ifconfig` before and after your
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Demeter Tibor tdeme...@itsmart.hu
Cc: users@ovirt.org, Allon Mureinik amure...@redhat.com, Federico
Simoncelli fsimo...@redhat.com
Sent: Wednesday, September 3, 2014 12:50:30 PM
Subject: Re: [ovirt-users] Can I use qcow2?
Hello Andreas,
We currently do not provide a MIB. I've opend an RFE[1] for discussion.
Feedback will be appreciated.
I am unfamiliar with Nagios.
a MIB-less solution can be made by passing traps from snmptrapd to a custom
handler (script) instead of SNMPTT. regexp filtering based on OIDs
Are you using 10Gb virtio interfaces on your VMs?
- Original Message -
From: Grzegorz Szypa grzegorz.sz...@gmail.com
To: users@ovirt.org
Sent: Tuesday, September 2, 2014 1:48:23 PM
Subject: [ovirt-users] Network real-time bar - nothing happened
Hi.
For a long time I have a
On Wed, Sep 3, 2014 at 1:22 PM, Sven Kieske s.kie...@mittwald.de wrote:
Am 03.09.2014 12:50, schrieb Itamar Heim:
Allon/Federico - I remember on NFS, qcow2 isn't used by default, since
raw is sparse by default.
(but i don't remember if it won't work, or just not enabled by
default).
Hi,
Can't you get the MIB by using snmpwalk? I did this for our switch some
time ago..
http://www.net-snmp.org/wiki/index.php/Snmpwalk
http://www.unleashnetworks.com/resources/articles/95-work-with-output-from-snmpwalk.html
Kind regards,
Jorick Astrego
Netbulae
On 09/03/2014 02:10 PM,
Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-09-03-13.59.html
Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-09-03-13.59.txt
Log:
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-09-03-13.59.log.html
=
#ovirt: oVirt Weekly
- Original Message -
Hi,
Can't you get the MIB by using snmpwalk? I did this for our switch some time
ago..
AFAIK unfortunately no since the notifier only sends traps and will not respond
to requests (GETNEXT as explained by the provided link)
Am 03.09.2014 15:09, schrieb Gianluca Cecchi:
As far as I know from official RHEV docs, the better reference page is this
(for RHEV 3.4):
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.4/html/Administration_Guide/Understanding_virtual_disks.html
Thanks
On Wed, Sep 3, 2014 at 5:24 PM, Sven Kieske s.kie...@mittwald.de wrote:
OT:
It's still a shame you can't open bugreports for rhev documentation
when you are no subscriber/customer, why not let others improve your
documentation for free?
I remember to have asked for something like that in
Am 03.09.2014 17:37, schrieb Gianluca Cecchi:
I remember to have asked for something like that in the past on this list
and then Tim Hildred thild...@redhat.com from Red Hat opened such a
bugzilla entry for me so that I could comment with my open account
see
Hi,
So, what do you recommend for glusterfs?
I have try out on local storage with native qcow2 format and the vm still could
start, but does not boot. It sad no bootable device found.
I convert to raw and it could boot without problems.
I will try out on my glusterfs based storage soon.
Thanks,
I tried to follow this guide Daniel P. Berrangé » Blog Archive » Guest CPU
model configuration in libvirt with QEMU/KVM
I found that the host that has the proble has no pbe|tm|ht||acpi|ds flags in
output of cat /proc/cpuinfo
In the Ovirt-Engine server I run the below
#virsh -r cpu-compare
On 09/03/2014 06:45 PM, Sven Kieske wrote:
Am 03.09.2014 17:37, schrieb Gianluca Cecchi:
I remember to have asked for something like that in the past on this list
and then Tim Hildred thild...@redhat.com from Red Hat opened such a
bugzilla entry for me so that I could comment with my open
I have found the below workaround:-
Xeon 5060 support Dempsey - Emulators Ovirt User
Xeon 5060 support Dempsey - Emulators Ovirt User
Emulators Discussion Forums : Xeon 5060 support Dempsey - Emulators Ovirt
User
View on t360192.emulators-ovirt-user.emulatortalk.info Preview by
Hi.
I have a problem with starting Centos system, after reboot. It's still stay
at Starting ovirt-post:.
When i start node on livecd and change mv /etc/init.d/ovirt-post
/etc/init.d/ovirt-post.bak
What going on.
So it should be or should disable this service?
--
G.Sz.
Hi Grzegorz,
On 09/03/2014 05:41 PM, Grzegorz Szypa wrote:
Hi.
I have a problem with starting Centos system, after reboot. It's still
stay at Starting ovirt-post:.
Can you please provide more details:
- What's the CentOS version?
- What's the oVirt version?
- Is it happening after a clean
Hi,
I read this article and found that we can expand the VM disk online but it
doesn't expand the filesystem of the VM.
I tried the following but still it didn't work..all the below commands
failed on the host..
I am using :-
1. Ovirt 3.4.3
2. Glusterfs 3.5
Hi,All
As the mauual, I can’t find anyway to backup/restore the rhevm-VM in
the hosted-engine. The I just try to backup the storage of rhevm-VM (using cp
�Cprf to make a copy of folder). Then I make some change and replace the
origin RHEVM-VM content with my backup folder (of course I
Hi Juan,
Is there anyways to specify the custom script from a file in the xml ? ie,
i have a script in a file called script.sh and i would like to include this
script in the xml with the api call. Is there any methods for this ?
--
Regards
Shanil
On Tue, Sep 2, 2014 at 3:02 PM, Shanil S
35 matches
Mail list logo
