Hi Demeter,
Yes...I already asked the same question before 2 monthsthey suggest me
the workaround (
http://www.ovirt.org/oVirt_Wiki:How_to_change_Gluster%27s_network_interface)
but after workaround still it's same...even no improvement in the Ovirt
3.5...
It's very hard to go in the
On 19/11/14 05:01, Xie, Chao wrote:
Hi,all
Recently I test the VLAN and have some problems. I configure
the Logical network “testvlan” with “VLAN tagged” and assigned it to
hosts’ NIC. Then I create a VM using “testvlan” and found the vm can’t
get IP . Does anyone have some
- Original Message -
From: Alon Bar-Lev alo...@redhat.com
To: Cameron Christensen cameron.christen...@uk2group.com, Yair
Zaslavsky yzasl...@redhat.com
Cc: users@ovirt.org
Sent: Monday, November 17, 2014 11:48:15 PM
Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication
Hi, all
I am testing the feature of ImprotStorageDomain recently, but meet some
problems.
http://www.ovirt.org/Features/ImportStorageDomain
http://www.ovirt.org/Features/ImportUnregisteredEntities
I have two setups: DC-A, DC-B, NFS storage: test-import
My steps are:
1. In DC-A, create some
- Original Message -
From: Cameron Christensen cameron.christen...@uk2group.com
To: Alon Bar-Lev alo...@redhat.com
Cc: Yair Zaslavsky yzasl...@redhat.com, users@ovirt.org
Sent: Tuesday, November 18, 2014 6:21:18 PM
Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication
Hi Coffee,
The OVF_STORE disk sync the VMs and Templates data in an un-synchronous way
every 60 minutes (see [1])
this might be the reason that sometime you see the entities candidate for
import and sometime you don't.
There are patches which sync the VMs/Templates data once the Storage
Hey,
Thanks, so how come node2 moves to non-operational state rather than
non-responsive (i.e. how come it's reachable from the engine)? The IP
address via which it was installed, belongs to which network interface?
bond1 which is used for data?
Lior.
On 18/11/14 12:17, Finstrle, Ludek wrote:
On 18-11-2014 20:57, Christopher Young wrote:
I'm replying to 'up' this as well as I'm most interested in this. I
actually thought this was implemented and working too.
On Mon, Nov 17, 2014 at 10:01 AM, Daniel Helgenberger
daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
testvlan logical network. I try the NIC hold normal logical network ,VM using
the logical network worked well. But if I hold the VLAN logical network, the VM
using it didn't get IP.
-邮件原件-
发件人:
On 19/11/14 10:45, Xie, Chao wrote:
Hi, Lior:
I configure the switch port connecting the host's NIC which hold the
testvlan logical network. I try the NIC hold normal logical network ,VM
using the logical network worked well. But if I hold the VLAN logical
network, the VM using it
On IE11 on Windows 7 I get the same error with Firefox (Status: Data refresh
failed: undefined). The previous screenshot was from IE11 on Windows 2008 R2
with mixed content disabled. I'm not able to test it on IE10 at the moment but
I will let me you know once I do.
Thanks again,
Sokratis
With thanks to Antoni we have this working now. The working hook may be viewed
at http://paste.fedoraproject.org/152070/
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: users users@ovirt.org
Sent: Monday, 17 November, 2014
- Original Message -
From: Daniel Helgenberger daniel.helgenber...@m-box.de
To: users@ovirt.org
Sent: Tuesday, November 18, 2014 5:46:07 PM
Subject: [ovirt-users] Power Management - but no LO?
Hello,
I am toying an idea involving using oVirt's PM capabilities (esp. the
cluster
Hi,
On oVirt 3.5.0, while doing a VM migration the progress bar always stays at 0%.
I tried it on different browsers (Chrome,IE,Firefox) and the behavior is the
same.
Any ideas about this?
Thanks,
Sokratis ___
- Original Message -
From: s k sokratis1...@outlook.com
To: users@ovirt.org
Sent: Wednesday, November 19, 2014 11:42:40 AM
Subject: [ovirt-users] Migration Progress Bar not updating
Hi,
On oVirt 3.5.0, while doing a VM migration the progress bar always stays at
0%. I tried it
Hi,
Just wonted to give you an update I'm correctly working on updating
http://www.ovirt.org/How_to_setup_a_oVirt_Reports_development_environment
and
http://www.ovirt.org/How_to_setup_a_oVirt_DWH_development_environment
Best regards,
---
Shirly Radco
BI Software Engineer
Red Hat Israel Ltd.
Hi, Maor
you are right. i update the database and it works normally
Thanks for your help:-)
2014-11-19 16:34 GMT+08:00 Maor Lipchuk mlipc...@redhat.com:
Hi Coffee,
The OVF_STORE disk sync the VMs and Templates data in an un-synchronous
way every 60 minutes (see [1])
this might be
Dear Expert,
I have upgraded my ovirt to 3.4, now Ovirt Report portal is opening but I
could not see any utilization data. It says no data available.
Screen shot attached below.
Thanks Regards
Chandrahasa S
=-=-=
Notice: The information contained in this e-mail
message
One of the migrations took about 1 minute and the progress bar was never
updated.
Date: Wed, 19 Nov 2014 04:46:30 -0500
From: ofren...@redhat.com
To: sokratis1...@outlook.com
CC: users@ovirt.org
Subject: Re: [ovirt-users] Migration Progress Bar not updating
- Original Message
- Original Message -
From: Shirly Radco sra...@redhat.com
To: 张亚琪 zhangyingyun...@gmail.com
Cc: users@ovirt.org
Sent: Wednesday, November 19, 2014 12:03:33 PM
Subject: Re: [ovirt-users] Can you update the wiki about how to setup ovirt
reports development?
Hi,
Just wonted
Perfect. Thank you, Shirly.
2014-11-19 18:03 GMT+08:00 Shirly Radco sra...@redhat.com:
Hi,
Just wonted to give you an update I'm correctly working on updating
http://www.ovirt.org/How_to_setup_a_oVirt_Reports_development_environment
and
On Nov 18, 2014, at 21:40 , John Gardeniers jgardeni...@objectmastery.com
wrote:
That works because you have effectively disabled ballooning for the VM, which
is not really solving the underlying problem.
regards,
John
On 18/11/14 10:02, Groten, Ryan wrote:
I also recently started
Hi Expert.
Is it possible to install virtual machines running Mac OS X on board.
I trying booting VM with mac os x ISO but it is ending with failed:
Boot failed: could not read the boot disk
--
G.Sz.
___
Users mailing list
Users@ovirt.org
This is an interesting topic, witch might prove not interoperable with
the oVirt project's approach on things (free software).
So, the short answer here is: No, does not work and might take a (long)
while to work out of the box in oVirt (if ever).
While it is possible with kernel 3.15 and very
Hi,
just a quick reminder about oVirt Sync Meeting: following DST changes the
meeting is now
16:00 - 17:00 CET
15:00 - 16:00 UTC
To get the new time in your timezone just run:
date --date 15:00 UTC
Thanks,
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community
Hi, is there a way of setting eth parameters for hypervisors? My freebsd
instance has terrible performance when these are enabled. Currently I
run these on all hypervisors manually.
ethtool –K vnet0 gro off
ethtool –K vnet2 gro off
ethtool –K vnet0 lro off
ethtool –K vnet2 lro off
as per:
Hi Chandrahasa,
Please provide me with a few details.
1. Is the dwh service running (ovirt-engine-dwhd) ?
2. What version of rpms are installed ? rpm -qa |grep ovirt
3. Is the data collected correctly to the history database?
you can check specifically in
htmlbodyHi Lior,
Engine has both networks (ovirtmgmt as eth0 and data as eth1). Internally the
cluster should communicate via ovirtmgmt (installed using internal name for
ovirtmgmt IP and this network is strictly local to the ovirt cluster). I'm
reaching web of engine via data IP (public
Hello,
after working with Foreman for a while come to love the yaml dump
feature for hosts as it proved invaluable for debugging and setups [1].
After some questions on the list here if for instance libgfapi is being
used I think such a feature also might prove useful in oVirt.
Right now, I
Hello,
I performed a full yum upgrade on a CentOS 6.5 Node which was upgraded to 6.6
and I currently the following RPM versions are installed:
[root@node01 ~]# uname -aLinux node01 2.6.32-504.1.3.el6.x86_64 #1 SMP Tue Nov
11 17:57:25 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux[root@node01 ~]# rpm
On Wed, 19 Nov 2014 09:03:44 + (GMT) Phil wrote:
PD With thanks to Antoni we have this working now. The working hook may
PD be viewed at http://paste.fedoraproject.org/152070/
I'd hate for this info to get lost, so I added a page in the oVirt wiki. I
haven't actually tried it, but just
- Original Message -
From: Grzegorz Szypa grzegorz.sz...@gmail.com
To: users@ovirt.org
Sent: Saturday, October 25, 2014 12:02:47 PM
Subject: [ovirt-users] change ovirt and node hostname.fqdn - all in one
installation
Hi.
Sorry for not replying earlier.
I have a problem
Hello,
I am evaluating ovirt and considering backups.
I have three solutions:
1) iscsi san that does snapshots
2) Glusterfs
3) ovirt api
So I have these questions:
- if I use 1) can I import a snapshot as different storage domain?
- glusterfs snapshot implementation is ready? Can I do
Please help!
I'm hosting an oVirt3.5 Engine server (CentOS6.5) and oVirt3.5 Host servers
(CentOS 7.0).
Today, I have stopped all oVirt services (ovirt-engine and vdsmd) and updated
oVirt3.5 Engine server and ovirt3.5 Host server by yum update.
While update, some new Gluster components were
Once upon a time, Gabi C gab...@gmail.com said:
tried localhost:gluster1?
No, I haven't - is that expected to work?
Also, as it turns out, I can't try it. I can edit the storage domain
and change the path, but the change is ignored. I cannot remove the
storage domain either; that's greyed
On 19/11/14 14:42, Finstrle, Ludek wrote:
Hi Lior,
Engine has both networks (ovirtmgmt as eth0 and data as eth1).
Internally the cluster should communicate via ovirtmgmt (installed using
internal name for ovirtmgmt IP and this network is strictly local to the
ovirt cluster). I'm
- Original Message -
From: Robert Story rst...@tislabs.com
To: users@ovirt.org
Sent: Wednesday, November 19, 2014 2:30:49 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
On Wed, 19 Nov 2014 09:03:44 + (GMT) Phil wrote:
PD With thanks to Antoni we have this working now. The
Hi Ernest,
we have similar issues with IPoIB. To fix it we use VDSM hooks:
# cat /usr/libexec/vdsm/hooks/before_vdsm_start/network.sh
...
ethtool -K ib0 tso off 2/dev/null
ethtool -K ib1 tso off 2/dev/null
...
Nevertheless this is similar to running self defined init scripts.
But at least I
- Original Message -
From: Joop jvdw...@xs4all.nl
To: users@ovirt.org
Sent: Monday, November 17, 2014 9:39:36 AM
Subject: [ovirt-users] Status libgfapi support in oVirt
I have been trying to use libgfapi glusterfs support in oVirt but can't
get it to work. After talks on IRC it
- Original Message -
From: noc n...@nieuwland.nl
To: users@ovirt.org
Sent: Wednesday, November 19, 2014 9:36:28 AM
Subject: Re: [ovirt-users] Status libgfapi support in oVirt
On 18-11-2014 20:57, Christopher Young wrote:
I'm replying to 'up' this as well as I'm most interested in
Le 27/10/2014 10:32, Nicolas Ecarnot a écrit :
Le 18/09/2014 13:35, Itamar Heim a écrit :
you should be able to move master domain to maint (deactivate, not
detach) as well (full or empty). engine will just configure another
storage domain as master iirc.
This is a nice feature, but as
On 11/19/2014 10:50 AM, Nicolas Ecarnot wrote:
Le 27/10/2014 10:32, Nicolas Ecarnot a écrit :
Le 18/09/2014 13:35, Itamar Heim a écrit :
you should be able to move master domain to maint (deactivate, not
detach) as well (full or empty). engine will just configure another
storage domain as
Minutes:
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.html
Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.txt
Log:
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.log.html
=
#ovirt: oVirt
Hi,
I have an IPA server 3.0 on centos 6.6.
I successfully attached to my ovirt cluster.
I can see the users on ovirt user tab, but after auth I always get this error:
Cannot Login. User Password has expired. Use the following URL to change the
password: (nothing)
I have try out with
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: users@ovirt.org List users@ovirt.org
Sent: Wednesday, November 19, 2014 6:46:32 PM
Subject: [ovirt-users] IPA-auth: user password expired
Hi,
I have an IPA server 3.0 on centos 6.6.
I successfully attached to my
Hello,
if I have an iscsi san that can do snapshots can I take an old snapshot and
reimport in ovirt as another data domain?
So I can recover old versions of virtual machines.
Thanks,
Mario
___
Users mailing list
Users@ovirt.org
Hello Eli,
thanks for getting back to me. Sadly the matter does not seem quite
clear for me right now; at least I have to read deeper into fence agents.
On 19.11.2014 10:26, Eli Mesika wrote:
- Original Message -
From: Daniel Helgenberger daniel.helgenber...@m-box.de
To:
Hi Tibor,
On Wed, Nov 19, 2014 at 6:46 PM, Demeter Tibor tdeme...@itsmart.hu wrote:
Hi,
I have an IPA server 3.0 on centos 6.6.
I successfully attached to my ovirt cluster.
I can see the users on ovirt user tab, but after auth I always get this
error:
Cannot Login. User Password has
Hi,
An ldappasswd command would change it without setting as expired. It will
prompt twice for the account password you'll set, and the password for the
directory manager once:
$ ldappasswd -ZZ -D 'cn=directory manager' -W -S
uid=USERNAME,cn=users,cn=accounts,dc=example,dc=org -H ldap://
Is there an el7 build of this available too?
On Nov 19, 2014, at 9:50 AM, Federico Simoncelli fsimo...@redhat.com wrote:
- Original Message -
From: noc n...@nieuwland.nl
To: users@ovirt.org
Sent: Wednesday, November 19, 2014 9:36:28 AM
Subject: Re: [ovirt-users] Status libgfapi
Hi everyone !
I am looking something about ovirt node upgrade .
we are using a old version of ovirt node 3.1. Also I test ovirt node
3.5 . Somethings is puzzling me .
1, In ovirt node 3.1 , it seemed I can't upgrade ovirt node ,because of
Hostvg's existence.
In Hostvg ,
Yes, thank you Robert. The hook is working wonderfully! Have a single NIC on
the VDSM host configured with public IP, then OVS installed, and VLANs hanging
off that to a guest which is acting as the firewall to internal/NAT systems.
[root@vmh01 ~]# ovs-vsctl show
Hi,
as i know, live merge is only available from the versions in the fedora
virt-preview repo. please see[1]
[1] http://www.ovirt.org/Features/Live_Merge#Current_status
2014-11-20 2:11 GMT+08:00 Daniel Helgenberger daniel.helgenber...@m-box.de
:
On 19.11.2014 14:06, s k wrote:
Hello,
On 11/19/2014 08:28 PM, Fumihide Tani wrote:
Please help!
I'm hosting an oVirt3.5 Engine server (CentOS6.5) and oVirt3.5 Host servers
(CentOS 7.0).
Today, I have stopped all oVirt services (ovirt-engine and vdsmd) and updated oVirt3.5
Engine server and ovirt3.5 Host server by yum update.
We will try and address this in the next release of oVirt - there were
some issues earlier with identifying the bricks correctly, but with the
gluster host uuid support in gluster xml commands, we can fix this.
https://bugzilla.redhat.com/show_bug.cgi?id=1049994 - marked for 3.6.0
On
Hi,
Is this feature will be available on an existing domain or on a live system ?
(after upgrade)
I would be very grateful if it will available on 3.5.x versions:)
In this case your team will be guest for a lot of chocklet/beer from me:)
Have a nice day,
Tibor
- Eredeti üzenet -
On 19-11-2014 23:44, Darrell Budic wrote:
Is there an el7 build of this available too?
That would be nice too. Forgot that I updated my test env to el7 to see
if that helped. Can test on F20 @home tonight if needed. Gonna try
something else first and will let you all know how that went.
Joop
57 matches
Mail list logo