Hi Venkat,
Just wanted to make sure your proposal is going well - deadline is soon.
Let me know if there's anything we can help you with.
Good luck,
Y.
On Wed, Mar 22, 2017 at 5:54 PM, Maor Lipchuk wrote:
> Hi Venkat,
>
> Nice to know you :) Thank you for your interest in
On Fri, Mar 31, 2017 at 3:43 PM, Lukáš Kaplan wrote:
> I solved this issue now.
>
> I thought till today, that iSCSI LUN ID (WWN or WWID) is globaly unique.
> It is not true!
> If you power on two identical linux machines and create iSCSI target on
> them, their LUN IDs will
On Tue, Mar 28, 2017 at 6:36 PM, Gianluca Cecchi
wrote:
>
>>
>> Why not building the vlan configuration using oVirt?
>>
>
> iSCSI to a DELL PS Series Storage array... no bonding in their minds
> ;-(
>
>
>> You can try to
>> ifdown eth3.100 and eth4.100,
>>
Hi,
I see sanlock lease refresh issues before your reboots:
Mar 30 17:21:12 hype01 sanlock[1210]: 2017-03-30 17:21:12+0300 2109 [3805]:
s1 delta_renew read timeout 10 sec offset 0
/dev/463e6284-7676-432e-9eed-384587525846/ids
Mar 30 17:21:12 hype01 sanlock[1210]: 2017-03-30 17:21:12+0300 2109
Hello,
We had a rather unpleseant surprise while upgrading our production datacenters
to oVirt 4.0 => 4.1 (although I think this problem is not related to oVirt
4.1).
Some critical VMs simply refused to reboot without any particular error message
other than "VM failed to boot"
After a
I solved this issue now.
I thought till today, that iSCSI LUN ID (WWN or WWID) is globaly unique. It
is not true!
If you power on two identical linux machines and create iSCSI target on
them, their LUN IDs will be same...
36e010001 - for first LUN
On Fri, Mar 31, 2017 at 1:05 PM, Oğuz Yarımtepe
wrote:
> Hi,
>
> I am using ovirt-engine-sdk-python (4.1.3). But couldn't find how to get
> the IP and MAC address of a vm. Any sample code for that?
>
Hi,
checkout this:
I have problem in oVIrt 4.1.1 and oVirt Node NG 4.1.1 with CHAP auth on iSCSI Target. oVIrt can't discover iSCSI if login and password set. Without auth enabled iSCSI was discovered well. oVirt 3.6 and CentOS 7.2 host works well with some iSCSI Target. 31.03.2017, 10:07, "Lukáš Kaplan"
Hello,
there should be feature parity (although it is not 100% right now) with
legacy network, so setting VLAN tags on logical networks should be all you
have to do in Engine.
However, you need to do some extra configuration on each host:
1) install openvswitch and enable its service
2) set
Hi,
I am using ovirt-engine-sdk-python (4.1.3). But couldn't find how to get
the IP and MAC address of a vm. Any sample code for that?
--
Oğuz Yarımtepe
http://about.me/oguzy
___
Users mailing list
Users@ovirt.org
Hello Folks,
I want to use OVS as network switch in oVirt 4.1, While Creating a cluster
i select OVS as switch type and all LAN ports of ovirt hosts or hypervisor
are configured in trunk mode on the network switch.
Logical networks are created and attached to the bond interface(consists of
LAN
On 30/03/2017 20:05, Juan Hernández wrote:
On 03/30/2017 01:01 PM, Giulio Casella wrote:
Hi,
I'm trying to obtain a list of users connected to a VM, using python SDK
v4.
Here's what I'm doing:
vm = vms_service.list(search="name=vmname")[0]
vm_service = vms_service.vm_service(vm.id)
sessions =
Hi, community! I'm try using ISCSI DATA DOMAIN with oVirt 4.1.1.6-1 and oVirt Node 4.1.1. But get this error while adding data domain. Error while executing action New SAN Storage Domain: Cannot deactivate Logical Volume 2017-03-31 10:47:45,099+03 ERROR
Bump,
please look.
Best regards,
Misak Khachatryan
On Fri, Mar 24, 2017 at 10:47 AM, Misak Khachatryan wrote:
> Hello,
>
> I have one server where i was installe oVirt node 4.1 and used in my
> infrastructure. It's used as single server cluster with local storage
>
On 03/31/2017 12:44 PM, knarra wrote:
On 03/29/2017 07:20 AM, Bryan Sockel wrote:
Guys,
I have recently setup a new Ovirt environment, and i have created a
gluster share for both my Export and ISO Domains. Every time i try
and use either command, i get an access denied error. Here is the
On 03/29/2017 07:20 AM, Bryan Sockel wrote:
Guys,
I have recently setup a new Ovirt environment, and i have created a
gluster share for both my Export and ISO Domains. Every time i try and
use either command, i get an access denied error. Here is the verbose
output from the image import:
Is it possible that problem can be in conflicting LUN IDs?
I see that first LUN from both storage servers have same LUN ID
36e010001. One storage server is connected to
ovirt and second is not connected because of described problem (ovirt dont
show lun after login and
Hi, community! 08.02.2017, 10:51, "Yedidyah Bar David" :On Wed, Feb 8, 2017 at 12:51 AM, Massimo Mad wrote: Hi, How is the right procedure for upgrade the host from 4.0 to 4.1. I don't find any document with the right procedure, if i use the iso of the
18 matches
Mail list logo