[ovirt-users] Re: Use public-signed SSL certs?

On Tue, Jan 29, 2019 at 6:05 PM Chris Adams wrote: > > I installed an SSL cert from a public CA (Let's Encrypt) on my engine, > following this: > >

[ovirt-users] Re: Suggestions on adding 1000 or more networks to an engine/hosts

> Would external OVN networks fit for your scenario? We steered away from them when we couldn't figure out how to add a VLAN Id on them without having to turn around and attach them to an "outside network" anyway we would essentially end up with double the networks with them in order to allow

[ovirt-users] Re: Host Only Network

Dan is correct and i have actully tested out both of these suggestions and the notes i have from them are: OVN Networks - These work well but seem to be limited in that they do not allow a VLAN ID to be tagged to them, seems the solution to that is to connect them to an external network which

[ovirt-users] Re: Administration Portal High Availability

Hello As i already tested HighAvailability of VM's on oVirt, sorry for misunderstanding i was referring to high availability of Administration Portal of oVirt. On Tue, 29 Jan 2019 06:52:26 -0500 Greg Sheremeta wrote: Hi! Our high-availability feature is called Self-Hosted Engine.

[ovirt-users] Re: Use public-signed SSL certs?

Did you try running engine-setup ? Regards, Paul S. From: Chris Adams Sent: 29 January 2019 15:51 To: users@ovirt.org Subject: [ovirt-users] Use public-signed SSL certs? I installed an SSL cert from a public CA (Let's Encrypt) on my

[ovirt-users] Re: Using the web-ui VM portal through a proxy failing

Hey, https://github.com/oVirt/ovirt-web-ui/issues/938 You can follow progress there. Thank you for reporting. Best wishes, Greg On Wed, Oct 24, 2018 at 11:41 AM Callum Smith wrote: > Dear Greg, > > Here's my config, this is based on the original guide and some other stuff > that i found to

[ovirt-users] Re: Use public-signed SSL certs?

Once upon a time, John Florian said: > Just to follow up on this Chris, I have my puppet drop my CA cert in > /etc/pki/ca-trust/source/anchors/, my self-signed cert > in/etc/pki/ovirt-engine/certs/ and my key in  > /etc/pki/ovirt-engine/keys.  I also manage >

[ovirt-users] Re: Use public-signed SSL certs?

On 1/29/19 3:13 PM, John Florian wrote: > On 1/29/19 2:47 PM, Chris Adams wrote: >> Once upon a time, John Florian said: >>> On 1/29/19 1:30 PM, Chris Adams wrote: Can that be run non-interactively to do whatever is needed? I'm using a Let's Encrypt cert, which needs to have a 100%

[ovirt-users] Re: Use public-signed SSL certs?

On 1/29/19 2:47 PM, Chris Adams wrote: Once upon a time, John Florian said: On 1/29/19 1:30 PM, Chris Adams wrote: Can that be run non-interactively to do whatever is needed? I'm using a Let's Encrypt cert, which needs to have a 100% automated deployment. Yes, I believe so.  Look at the

[ovirt-users] Re: Host Only Network

On Tue, 29 Jan 2019, 17:44 Dominik Holler On Tue, 29 Jan 2019 15:14:42 - > "Brian Wilson" wrote: > > > What is the proper way to provide networks without an egress of the > > host?In VMware i would take a portgroup and just not associate it > > with a vnic. In ovirt that doesnt seem

[ovirt-users] Re: Use public-signed SSL certs?

Once upon a time, John Florian said: > On 1/29/19 1:30 PM, Chris Adams wrote: > >Can that be run non-interactively to do whatever is needed? > >I'm using a Let's Encrypt cert, which needs to have a 100% automated > >deployment. > > Yes, I believe so.  Look at the whole biz with the "answers"

[ovirt-users] Re: Use public-signed SSL certs?

On 1/29/19 1:30 PM, Chris Adams wrote: Can that be run non-interactively to do whatever is needed? I'm using a Let's Encrypt cert, which needs to have a 100% automated deployment. Yes, I believe so.  Look at the whole biz with the "answers" file and the --config-append=file option.  You

[ovirt-users] Re: Suggestions on adding 1000 or more networks to an engine/hosts

On Tue, 29 Jan 2019 15:06:17 - "Brian Wilson" wrote: > So we have a use case where our engines will will be hosting > development sandbox clusters. We need to have upwards of 1000 > networks on some of these. > I expect that instantiating this big number of VLAN based networks on a host

[ovirt-users] Re: Use public-signed SSL certs?

I had not. Can that be run non-interactively to do whatever is needed? I'm using a Let's Encrypt cert, which needs to have a 100% automated deployment. Once upon a time, Staniforth, Paul said: > Did you try running engine-setup ? > > Regards, > Paul S. >

[ovirt-users] Re: host NonResponsive after trying to update network MTUs

Done. It still won't let me remove the host. clicked maintenance, checked ignore gluster... box. clicked remove. got popup " track00.yard.psc.edu: - Cannot remove Host. Server having Gluster volume." On Tue, Jan 29, 2019 at 4:24 AM Sahina Bose wrote: > On Mon, Jan 28, 2019 at 7:31 AM

[ovirt-users] Use public-signed SSL certs?

I installed an SSL cert from a public CA (Let's Encrypt) on my engine, following this: https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_CA_Certificate That gets the regular web

[ovirt-users] Re: need network design advice for iSCSI

Okay, both the BZ and ML posts are interesting and helpful.  I'm kind of surprised there seems to be so much trouble and confusion for what I would have thought to be a very common setup.  Are most people using something else? I think this gives me what I need for my next stab at doing this

[ovirt-users] Re: Host Only Network

On Tue, 29 Jan 2019 15:14:42 - "Brian Wilson" wrote: > What is the proper way to provide networks without an egress of the > host?In VMware i would take a portgroup and just not associate it > with a vnic. In ovirt that doesnt seem possible as the network > doesnt seem to function

[ovirt-users] Host Only Network

What is the proper way to provide networks without an egress of the host?In VMware i would take a portgroup and just not associate it with a vnic. In ovirt that doesnt seem possible as the network doesnt seem to function unless i move to a physical nic under the "Setup Host Networks"

[ovirt-users] Suggestions on adding 1000 or more networks to an engine/hosts

So we have a use case where our engines will will be hosting development sandbox clusters. We need to have upwards of 1000 networks on some of these. I understand there is no theoretical limit to the number of networks does any body have a good reliable way of instantiating all of these

[ovirt-users] Re: Roles and Permissions and Inheritance

This seems to work however still trying to solve the issue of if we dont give access to networks at a higher level (Cluster or DC) then it must be given at the Network level for every network that we would like them to have access to. Since we are using an AD group to assign access to the

[ovirt-users] Re: Single Node Deployment - Self-Hosted-Engine

Wanted to just close out this Thread and mention that using a self created gluster volume on the host itself was pretty easy and worked out well. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy

[ovirt-users] [ANN] oVirt 4.3.0 Fourth Release Candidate is now available for testing

The oVirt Project is pleased to announce the availability of the Fourth Release Candidate of oVirt 4.3.0, as of January 29th, 2019 This is pre-release software. This pre-release should not to be used in production. Please take a look at our community page[1] to learn how to ask questions and

[ovirt-users] Planned infra outage - Saturday February 2

Hi everyone, There's a maintenance window planned for this Saturday, February 2 2019 to upgrade network equipment in the PHX datacenter. The change will be implemented during afternoon hours and several oVirt infra services may be unreachable for short periods of time, specifically: * package

[ovirt-users] Re: Sanlock volume corrupted on deployment

Dear Nir,According to redhat solution 1179163 'add_lockspace fail result -233' indicates corrupted ids lockspace.During the install, the VM fails to get up.In order to fix it, I stop:ovirt-ha-agent, ovirt-ha-broker, vdsmd, supervdsmd, sanlockThen reinitialize the lockspace via 'sanlock direct init

[ovirt-users] Re: ovirt-sdk_external network add

On Tue, 29 Jan 2019 13:08:06 +0200 ada per wrote: > thank you!! > > Is there any other method to use the network name instead of id? if > not its fine, i ll use the list networks first and then match the > ids with the names and delete accordingly > I am not aware. If you want to have more

[ovirt-users] Re: Administration Portal High Availability

Hi! Our high-availability feature is called Self-Hosted Engine. https://www.ovirt.org/documentation/self-hosted/chap-Introduction.html """ Additionally, the Engine is configured to be highly available. If the host running the Engine virtual machine goes into maintenance mode, or fails

[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng

Hi, I know people are busy but do we have any progress on this, I removed the OVS cluster and recreated it with bridge networking. But I'm still stuck on the "failed to fetch volume file" and am unable to activate the hosts to continue testing... Anything else I can try to debug? The storage

[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8

To add to that, I removed the nodes and reinstalled without OVS so it's weird it still complains about it. Regards, Jorick On 1/29/19 12:40 AM, Jorick Astrego wrote: > > Noticed this one too on 4.3.0 rc2, didn't have time to check it out > though. > > Today I saw it after I removed an OVS

[ovirt-users] Re: Deploying single instance - error

On Mon, Jan 28, 2019 at 5:17 PM Sachidananda URS wrote: > Hi David, > > On Mon, Jan 28, 2019 at 5:01 PM Gobinda Das wrote: > >> Hi David, >> Thanks! >> Adding sac to check if we are missing anything for gdeploy. >> >> On Mon, Jan 28, 2019 at 4:33 PM Leo David wrote: >> >>> Hi Gobinda, >>>

[ovirt-users] Re: ovirt-sdk_external network add

thank you!! Is there any other method to use the network name instead of id? if not its fine, i ll use the list networks first and then match the ids with the names and delete accordingly On Tue, Jan 29, 2019 at 12:46 PM Dominik Holler wrote: > On Tue, 29 Jan 2019 12:23:32 +0200 > ada per

[ovirt-users] Re: ovirt-sdk_external network add

On Tue, 29 Jan 2019 12:23:32 +0200 ada per wrote: > Hello again, > > And how about to delete a logical network? > as remove option is not available in: > system_service().networks_service() > network_service = networks_service.network_service(network.id) network_service.remove() > On Mon,

[ovirt-users] Re: ovirt-sdk_external network add

Hello again, And how about to delete a logical network? as remove option is not available in: system_service().networks_service() On Mon, Jan 28, 2019 at 7:01 PM Dominik Holler wrote: > On Mon, 28 Jan 2019 16:34:30 - > "ada per" wrote: > > > Hello everyone, > > I have the following

[ovirt-users] Re: Error creating a storage domain (On Cisco UCS Only)

This looks like underlying error: 2019-01-27 11:09:59,468+0400 ERROR (jsonrpc/4) [storage.Dispatcher] FINISH createStorageDomain error=Command ['/usr/bin/dd', 'iflag=fullblock',

[ovirt-users] Re: host NonResponsive after trying to update network MTUs

On Mon, Jan 28, 2019 at 7:31 AM Edward Berger wrote: > > I have a problem host which also is the one I deployed a hyperconverged oVirt > node-ng cluster from with the cockpit's hyperconverged installation wizard. > > When I realized after deploying that I hadn't set the MTUs correctly for the >

[ovirt-users] Re: Hyperconverged setup - storage architecture - scaling

On Mon, Jan 28, 2019 at 6:22 PM Leo David wrote: > > Hello Everyone, > Reading through the document: > "Red Hat Hyperconverged Infrastructure for Virtualization 1.5 > Automating RHHI for Virtualization deployment" > > Regarding storage scaling, i see the following statements: > > 2.7. SCALING >

[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8

On Tue, Jan 29, 2019 at 1:42 AM Jorick Astrego wrote: > > Noticed this one too on 4.3.0 rc2, didn't have time to check it out though. > > Today I saw it after I removed an OVS cluster and recreated the cluster with > "legacy" bridge networking. > > Regards, > > Jorick Astrego > > Netbulae > > >

[ovirt-users] Re: Clearing asynchronous task Unknown

Hi Nicholas, Thanks for this. Indeed, that was the problem. I opened the vdsm log and saw a lot of exceptions like this: 2019-01-28 10:56:54,792+ INFO (jsonrpc/2) [vdsm.api] FINISH clearTask error=Operation is not allowed in this task state: ("can't clean in state running",)

[ovirt-users] [ANN] oVirt 4.2.8 async update is now available

The oVirt Team has just released a new version of the following packages: - ovirt-engine-metrics-1.1.8.1 The async release addresses the following bugs: Bug 1631808 - Ensure ovirt-engine-metrics in oVirt 4.2 doesn't have compatibility issues