I run ovirt in my homelab, and have an Equallogic PS6000.
I did this the other week, and it took about 8 to 10 minutes for the VMs
to start coming back. I run my engine off of the SAN, and it had some
trouble coming back because ovirt was in a lease lock situation.
The engine VMs did pause,
Hi all,
On Fri, Feb 28, 2020 at 9:36 PM Eugène Ngontang wrote:
>
> AHAH Dereck, thx for googling,
>
> I knew I could google it, that's not an expert stuff, nevertheless as you
> seemed to be aware of the SDK subject I was wondering if you have links you
> find yourself useful (even from
Hi
> If someone had Red Hat signed drivers from Red Hat Virtualization it may
> work, other wise I think it's a futile effort.
Hmm, though I don't think Red Hat will particularly like it, but when
it comes to just the drivers, not the full ISO with the RHV/oVirt
guest agents there might be a
When I attach a vnic to a vm and try to start it I get the following message:
* Cannot run VM. There is no host that satisfies current scheduling
constraints. See below for details:
* The host kvm04 did not satisfy internal filter Network because there
are no free virtual
I have all 3 hosts attached through physical nics to the vlan. When I attach a
vm, it is isolated…cannot ping anything and doesn’t use the dchp server for the
network.
Eric Evans
Digital Data Services LLC.
304.660.9080
From: Alex K
Sent: Saturday, February 29, 2020 2:48 PM
To:
On Sat, Feb 29, 2020, 18:38 wrote:
> I have a network in place with several subnets, one for iscsi and one for
> virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get
> Ovirt to recognize and use the physical vlan 3 network for phones. If I add
> it and the subnet, Ovirt will
I have a network in place with several subnets, one for iscsi and one for
virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get Ovirt
to recognize and use the physical vlan 3 network for phones. If I add it and
the subnet, Ovirt will make give it an IP, but it's an isolated
I tried to bare metal provision Server 2016 into an ovirt vm. After much
research I learned sine the ovirt drivers are not WHQL Windows Deployment
Server will not use them. It gets an IP from the pxe boot and gets to a point
that says starting setup, then I get the error. I loaded Server 2016,
I think you may be misinterpreting hci. Even though the hosts are used for
storage it’s still not technically local storage as the hosts are acting as
clients and are mounting the gluster storage.. so storage is still over
network.
You can get better gluster performance if you switch To libgfapi
Hi Strahil , Leo and Jayme,
This thread is getting more and more useful, great.
Atm, I have 15 nodes cluster with shared Storage from Netapp. The storage
network is (NFS4.1) on 20GB LACP, separated from control.
Performance is generally great, except in several test cases when using "send
On February 29, 2020 11:19:30 AM GMT+02:00, Jayme wrote:
>I currently have a three host hci in rep 3 (no arbiter). 10gbe network
>and
>ssds making up the bricks. I’ve wondered what the result of adding
>three
>more nodes to expand hci would be. Is there an overall storage
>performance
>increase
I currently have a three host hci in rep 3 (no arbiter). 10gbe network and
ssds making up the bricks. I’ve wondered what the result of adding three
more nodes to expand hci would be. Is there an overall storage performance
increase when gluster is expanded like this?
On Sat, Feb 29, 2020 at 4:26
Hi,
As a first setup, you can go with a 3 nodes HCI and having the data volume
in a replica 3 setup.
Afterwards, if you want to expand HCI ( compute and storage too) you can
add sets of 3 nodes, and the data volume will automatically become
replicated-distributed. Safely, you can add sets of 3
13 matches
Mail list logo
