So,
I just added the first host and I cannot check if fencing works until I add
the second host?
Nice to know
Thanks again,
Mario
2015-04-13 21:18 GMT+02:00 Eli Mesika emes...@redhat.com:
- Original Message -
From: Mario Giammarco mgiamma...@gmail.com
To: users@ovirt.org
Sent
Hello,
I am trying to use ap7920 as fencing device for ovirt 3.5.1
I have configured all parameters correctly but I get only:
2015-04-13 20:58:21,704 ERROR [org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-10) Failed to run Power Management command on Host , no
running proxy Host
Moran Goldboim mgoldboi@... writes:
Deploying oVirt engine has never been so easy.
Hi,
I have seen the project and it is interesting a lot.
Please note that next version of synology NAS OS will have docker support,
so I can buy a nas and use it also as ovirt-engine.
But I am learning docker
Hello,
I would like to try ovirt with hosted engine installation.
I had so many problems (I have written them in another thread) so I will
not try anymore hosted installation (up and running with ovirt 3.5 tutorial)
But now I would try this approach: I install the engine on a dedicated
server or
2015-01-16 11:16 GMT+01:00 Simone Tiraboschi stira...@redhat.com:
oVirt 3.5.1 RC1 will be published today so, if everything runs as
expected, oVirt 3.5.1 will be out in a few days. oVirt 3.5.1 should solve
the issue you reported.
Ok I will wait 3.5.1 and try again.
Keep present that
Hello,
I ask this question again to see if there are some improvements.
I am searching for a low cost stonith/fencing device for servers or
hardware that has no ipmi/ilo on board.
I see that there are some interesting products on the market like ubnt/mfi
mpower that are controllable power
2015-01-16 18:52 GMT+01:00 Daniel Helgenberger daniel.helgenber...@m-box.de
:
Hello Mario,
great you ask that, I am pretty interested myself.
Great, I am not alone!
Atm, I did not have time to persue this subjct any futher.
Me too, if I had time I would have tried to develop mPower
2015-01-16 12:37 GMT+01:00 Simone Tiraboschi stira...@redhat.com:
HA capability is provided for other VMs by oVirt engine. But who provide
it if the engine itself is on a VM on the host that it's managing?
HA for the Engine VM needs to be managed by the hosts and not the Engine
itself: so we
-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On
Behalf Of *Mario Giammarco
*Sent:* Tuesday, January 13, 2015 8:23 AM
*To:* Artyom Lukianov
*Cc:* users@ovirt.org
*Subject:* Re: [ovirt-users] Ovirt and power saving
I mean that I know that I can set a power saving policy, it is a very
Hello,
I would like to ask if it is possible to do this use case with ovirt:
1) two servers powered on
2) operator suspend some virtual machines
3) load falls down
4) ovirt shutdown one server
Then operator unpauses virtual machines and ovirt starts again the 2nd
server.
Thanks,
Mario
HostsInReserve to 0 if you do not want additional hosts in reserve.
- Original Message -
From: Mario Giammarco mgiamma...@gmail.com
To: users@ovirt.org
Sent: Tuesday, January 13, 2015 1:30:38 PM
Subject: [ovirt-users] Ovirt and power saving
Hello,
I would like to ask if it is possible
trigger the low
utilization parameter?
- Original Message -
From: Mario Giammarco mgiamma...@gmail.com
To: Artyom Lukianov aluki...@redhat.com
Cc: users@ovirt.org
Sent: Tuesday, January 13, 2015 3:05:06 PM
Subject: Re: [ovirt-users] Ovirt and power saving
Thanks for reply.
I just
2014-11-24 10:53 GMT+01:00 Sandro Bonazzola sbona...@redhat.com:
Can you please attach the logs of the error you got?
I can't help with trying to complete a setup manually without knowing the
current state :-)
I fear I have lost the log, can you please help me providing the name or
path
it work.
Thanks,
Mario
2014-11-24 12:45 GMT+01:00 Sandro Bonazzola sbona...@redhat.com:
Il 24/11/2014 12:26, Mario Giammarco ha scritto:
2014-11-24 10:53 GMT+01:00 Sandro Bonazzola sbona...@redhat.com
mailto:sbona...@redhat.com:
Can you please attach the logs of the error you got
2014-11-20 12:45 GMT+01:00 Simone Tiraboschi stira...@redhat.com:
If you use direct LUN option for a VM image, you can take a snapshot of
that LUN on the SAN and attach it as another direct LUN and eventually boot
from that. Do you really need to take an online snapshot of the whole
storage
Hello,
I am following the guide up and running with ovirt 3.5 but with iscsi and
not glusterfs.
On the last step (after I have already installed ovirt-engine in the vm)
the script has stopped due to an error.
So the ovirt hosted vm is not registered in the datacenter and iscsi
storage is not seen
Hello,
I am following the guide up and running with ovirt 3.5 but with iscsi and
not glusterfs.
On the last step (after I have already installed ovirt-engine in the vm)
the script has stopped due to an error.
So the ovirt hosted vm is not registered in the datacenter and iscsi
storage is not seen
I add that also I cannot add the iscsi storage domain to current datacenter
because obviously it is already attached to another datacenter.
Mario
2014-11-21 19:39 GMT+01:00 Mario Giammarco mgiamma...@gmail.com:
Hello,
I am following the guide up and running with ovirt 3.5 but with iscsi
Hello,
I am evaluating ovirt and considering backups.
I have three solutions:
1) iscsi san that does snapshots
2) Glusterfs
3) ovirt api
So I have these questions:
- if I use 1) can I import a snapshot as different storage domain?
- glusterfs snapshot implementation is ready? Can I do
Hello,
if I have an iscsi san that can do snapshots can I take an old snapshot and
reimport in ovirt as another data domain?
So I can recover old versions of virtual machines.
Thanks,
Mario
___
Users mailing list
Users@ovirt.org
Mario Giammarco mgiammarco@... writes:
I would like to know if there are improvements regarding ovirt support of
mixed clusters (with amd and intel cpus).
No improvements I suppose...
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org
Hello,
I would like to know if there are improvements regarding ovirt support of
mixed clusters (with amd and intel cpus).
I see that is a feature supported by kvm because at least pve/proxmox and
cloudstack support mixed cluster with migration and ha.
Thanks in advance for any reply!
Mario
Itamar Heim iheim@... writes:
do you see the files on the gluster volume?
you should be able to convert it to an export domain and import them
Convert with ? The datacenter is down. Can I find the vm hard disk image and
mount it? It is a qcow image?
Mario Giammarco mgiammarco@... writes:
What can I do now??
At least can you say me how I can recover disk images from gluster?
Thanks,
Mario
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hello,
after some shutdowns and reboots of my ovirt cluster now the data center is
down:
- gluster volumes are all UP
- all storage (Data/ISO) is inactive
- Datacenter is down.
I have tried to click on all activate buttons I have found but nothing
happens.
Only one time I got:
- failed to
Itamar Heim iheim@... writes:
engine logs?
vdsm logs from spm candidate host?
vdsm:
http://pastebin.com/KZZ3pqL6
engine:
http://pastebin.com/sX7sKpbE
I am using posixfs for glusters
___
Users mailing list
Users@ovirt.org
Yes I can see al volumes, also in user interface.
2013/10/25 Vincent Van der Kussen vinc...@vanderkussen.org
On 10/25/2013 03:01 PM, Mario Giammarco wrote:
Hello,
after some shutdowns and reboots of my ovirt cluster now the data center
is
down:
- gluster volumes are all UP
Hello,
I am continuing tests with ovirt.
Now I am trying windows7. I started without using virt-io.
It worked for one day. Then the windows7 vm goes automatically on stated
paused and there is no way to reenable it.
Only way is to delete and recreate. So I did it.
Now I cannot shutdown it. It
Gianluca Cecchi gianluca.cecchi@... writes:
See this thread of mine if it can be in any way related, at least for
the paused state:
http://lists.ovirt.org/pipermail/users/2013-February/012597.html
No suggestions for the doamin not found error...
Thanks but unfortunately it goes in paused
Christophe Fergeau cfergeau@... writes:
I'd make sure the QXL driver is installed in the Ubuntu guest, but I think
Ubuntu being slow has already been mentioned, probably related to their 3d
use for Unity. If there is a 2d fallback for Unity, I'd try this, or
a different window manager.
Ok
noc noc@... writes:
http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/ is the
place too look for.
The proxmox site/forum has a wiki page describing which folder
Thank infact proxmox documentation is more detailed.
Anyway my blocking problem now is that, even if I have installed
Mario Giammarco mgiammarco@... writes:
Anyway my blocking problem now is that, even if I have installed the spice
qxl driver the mouse is unusable if I enable spice console, so I can only
use vnc under Windows.
Update: tried windows7 and mouse works nice. I cannot use usb-client mode
Martijn Grendelman martijn.grendelman@... writes:
I have been playing with the VirtIO drivers from mentioned ISO on
Windows XP, but I experienced a lot of BSODs.
In the end, I set NICs to emulate as rtl8139 and disks as IDE, and that
seems to work.
Many thanks,
infact during creation of
Doron Fediuck dfediuck@... writes:
- Original Message -
From: Dan Kenigsberg danken@...
To: Mario Giammarco mgiammarco@..., doron@...
Cc: users@...
Sent: Saturday, October 12, 2013 11:28:18 PM
Subject: Re: [Users] Should host reboot trigger migration?
On Sat, Oct 12
Hello,
I am testing ovirt and now I have tried to install a windows xp image.
I used standard options but:
- with spice display mouse is unusable, solved using vnc;
- anyway all drivers (net,vga,others) are missing.
I have found a virt-io iso but it does not work.
Where can I find an ISO with
Hello,
I have a two hosts ovirt cluster.
I rebooted one of the hoping to see the migration of vm on other host.
But it does not happen and so vm are brutally shutdownd.
Is auto migration supported? Where can I enable it?
Thanks,
Mario
___
Users
Eli Mesika emesika@... writes:
I would look for a APC strip (in ebay for example)
APC just disconnects the device from the AC power
Thanks,
I have tried but I have found very few items. Most of them have no ethernet
or are not for 220volt lines.
Other suggestions?
Thanks again,
Mario
Yedidyah Bar David didi@... writes:
Build one yourself with a raspberry pi - search e.g. for
raspberry pi remote power...
Thanks,
infact I can find on internet several remote controlled outlets at low price:
-http://www.ubnt.com/mfi#m-Power
But, how can I make them compatible with ovirt?
Hello,
I would like to try ovirt powermanagement. I have no ILO so I would like to
buy some power management device.
Since it is a test I would like to stay in 100 euro range.
Is it possible?
Thanks,
Mario
___
Users mailing list
Users@ovirt.org
Hello,
I have a vm disk in glusterfs volume X. Now I have a replicated gluster
volume Y. I would like to move the vm disk on it but if I go to move menu
I cannot choose the target and I see a warning: some disks cannot be moved.
How can I move it?
Thanks,
Mario
Mario Giammarco mgiammarco@... writes:
How can I move it?
Thanks,
Mario
Sorry forgot to create domain
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hello,
I am evaluating ovirt as a developer virtualization solution and a
virtualizer for fast provisioning of software in SOHO market (I send entire
vms preconfigured)
I use ovirt on centos6 with glusterfs.
So I have these questions that I have not found the reply in forums:
- In my lab I use
Thanks for so quick and detailed reply!
I use ovirt on centos6 with glusterfs.
I assume you are using a posixfs storage domain?
Yes posixfx not glusterfs.
rendering is slow;
adding spice-devel on this one
Thanks, to be more precise rendering is laggy
- I have created some
Itamar Heim iheim@... writes:
On 10/23/2012 07:38 PM, Alon Bar-Lev wrote:
or easier, ovirt rest api, sdk or cli.
the cli has a console command which will handle launching spice for you,
just like user portal.
would be great getting it to work on ubuntu (it's python)
Again only on
submit ovirtsdk to pypi so
at least it will be installabe using pip/easy_install.
i'll do that tomorrow.
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: users@ovirt.org, Mario Giammarco mgiamma...@gmail.com
Sent
Hello,
I am using ovirt 3.1
I do:
engine-iso-uploader -v -i ISO list
and I get:
Please provide the REST API password for the admin@internal
oVirt Engine user
(CTRL+D to abort):
I insert correct password but I get:
ERROR: [ERROR]::ca_file (CA certificate) must be specified
for SSL
Andrew Cathrow acathrow@... writes:
Ideally this should be included in the core distro.
Is there an alternative to mozilla-xpi?
Can I use spicy?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Jason Brooks jbrooks@... writes:
This is the repo I set up to feed the ppa:
https://github.com/jasonbrooks/spice-xpi-ppa
Cannot compile. Missing typelib.py. It is in a different path in firefox-dev
package.
So I fix the path but now it misses header.py and this is really missing.
Thanks,
Hello,
I need a working mozilla-xpi for Ubuntu 12.04 (and soon 12.10).
It is strange that an opensource project as ovirt is only working on Fedora.
Thanks in advance for any help.
Mario
___
Users mailing list
Users@ovirt.org
So there is an rpm works also in redhat. Great. I have read beta howto
to install it in ubuntu and it seemed very difficult.
2012/2/26 Itamar Heim ih...@redhat.com:
On 02/26/2012 03:00 PM, Mario Giammarco wrote:
Hello,
sorry I cannot reply to my old thread but I forgot one question:
can I
Hello,
sorry I cannot reply to my old thread but I forgot one question:
can I install only the ovirt agent on centos/redhat?
I have already several server with centos/redhat installed and I do not want to
restart from scratch.
Thanks again,
Mario
Hello,
I have in my server lab several machines:
- with debian or ubuntu
- without virtualization extensions.
So I ask:
- is the ovirt agent (not the manager) installable on debian/ubuntu/gentoo?
- is the agent compatible with rhev?
- can ovirt manager use rhev agent?
- can ovirt use servers
52 matches
Mail list logo
