Lindsay,
You have to build the windows guest agent. I have some directions that I need
to add to the Wiki about that. I'll get them added and reply with a link, of
you don't figure it put before then.
- Nick
--- Original Message ---
From: Lindsay Mathieson lindsay.mathie...@gmail.com
Sent:
Hi Karthik,
Ovirt-engine is not yet supported on Fedora 20 as far as I know. Even ovirt 3.4
is targeting Fedora 19.
To run Ovirt-Engine you may want to use Fedora 19 until Ovirt-Engine supports
Fedora 20.
- Nick
Date: Mon, 10 Feb 2014 00:09:45 +0530
From: karthik.c...@gmail.com
To:
Steve,
What is the CPU load of the GlusterFS host when comparing the raw brick test to
the gluster mount point test? Give it 30 seconds and see what top reports.
You’ll probably have to significantly increase the count on the test so that it
runs that long.
- Nick
From: Sanjay Rao
From: pota...@yahoo.com
Date: Fri, 3 Jan 2014 16:45:38 -0500
To: users@ovirt.org
Subject: Re: [Users] Almost there... I can't bring up a VM
Hi. I need some help to troubleshoot this. I can't find a log showing
any hint for me to go forward with it.
Date: Thu, 19 Dec 2013 16:48:43 -0500
From: ih...@redhat.com
To: b...@doolittle.us.com; lindsay.mathie...@gmail.com; users@ovirt.org
Subject: Re: [Users] Agents for Windows
On 12/19/2013 04:45 PM, Bob Doolittle wrote:
On 12/19/2013 04:40 PM, Itamar Heim wrote:
the main problems
- Original Message -
From: Gianluca Cecchi gianluca.cec...@gmail.com
To: Alon Bar-Lev alo...@redhat.com
Cc: Frantisek Kobzik fkob...@redhat.com, users users@ovirt.org
Sent: Saturday, December 14, 2013 12:08:39 AM
Subject: Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
From: michal.skriva...@redhat.com
Date: Tue, 3 Dec 2013 14:23:19 +0100
To: blas...@556nato.com
CC: users@ovirt.org
Subject: Re: [Users] What agents are needed?
On Dec 3, 2013, at 10:52 , Vinzenz Feenstra vfeen...@redhat.com wrote:
On 11/30/2013 09:49 PM, Blaster wrote:
There
:
*From: *Nicholas Kesick cybertimber2...@hotmail.com
*To: *oVirt Mailing List users@ovirt.org
*Sent: *Wednesday, September 25, 2013 8:43:47 PM
*Subject: *[Users] Export Domain Upgrade
This is the first time I've run through an 'upgrade', so I'm very
I'm trying to understand the various console options for a wiki page. Can
someone make sure what I have in the attachments are right?
Also when a VM is set to Spice and I open Console Options (at least in IE 10
for me, need to test further), it opens to Remote Desktop. Are these active
yet?
Date: Tue, 24 Sep 2013 13:28:26 +0100
From: dan...@redhat.com
To: cybertimber2...@hotmail.com
CC: jbro...@redhat.com; masa...@redhat.com; alo...@redhat.com; users@ovirt.org
Subject: Re: [Users] Unable to finish AIO 3.3.0 - VDSM
On Mon, Sep 23, 2013 at 06:10:09PM -0400, Nicholas Kesick
Date: Tue, 24 Sep 2013 13:28:26 +0100
From: dan...@redhat.com
To: cybertimber2...@hotmail.com
CC: jbro...@redhat.com; masa...@redhat.com; alo...@redhat.com;
users@ovirt.org
Subject: Re: [Users] Unable to finish AIO 3.3.0 - VDSM
snipped
Here, Vdsm is trying to configure em1
Date: Fri, 6 Sep 2013 22:05:05 +0100
From: dan...@redhat.com
To: jvdw...@xs4all.nl
CC: users@ovirt.org
Subject: Re: [Users] very odd permission problem
On Fri, Sep 06, 2013 at 04:05:13PM +0200, Joop wrote:
Alessandro Bianchi wrote:
On 6-9-2013 12:34, Alessandro Bianchi wrote:
Hi
From: cybertimber2...@hotmail.com
To: dan...@redhat.com; jvdw...@xs4all.nl
CC: users@ovirt.org
Subject: RE: [Users] very odd permission problem
Date: Fri, 6 Sep 2013 21:35:51 -0400
Date: Fri, 6 Sep 2013 22:05:05 +0100
From: dan...@redhat.com
To: jvdw...@xs4all.nl
CC: users@ovirt.org
It looks like you need 746MB free to install the packages. 702MB currently free
+ 44MB more.
Nick
From: 陈良
Sent: Thursday, August 29, 2013 4:23 AM
To: ovirt
Hi:
when I was install engine,I got this problems:
Transaction Check Error:
installing package
I did some testing with Fedora 18 (waiting for the Fedora 19 dvd to finish
downloading) and I think that the behavior was the same way in Fedora 18. In
Fedora 18 when installing from DVD if you select “Minimal Install”, you do not
get tar.
However, if you select “Minimal install” and
:28PM -0400, Nicholas Kesick wrote:
Date: Fri, 26 Jul 2013 05:52:44 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: dan...@redhat.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/26/2013 05:40 AM, Nicholas Kesick
Date: Fri, 26 Jul 2013 05:52:44 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: dan...@redhat.com; users@ovirt.org
Subject: Re: [Users] oVirt 3.2 - Migration failed due to error: migrateerr
On 07/26/2013 05:40 AM, Nicholas Kesick wrote:
Replies inline.
Date: Thu
I know for the past couple releases, oVirt has been released after a Fedora
release (e.g. 3.1 shortly after Fedora 17, 3.2 shortly after Fedora 18). Based
on the meeting notes it looks like 3.3 will release 6 weeks after Fedora 19 if
both timelines hold steady.
Will oVirt 3.2 be supported
I've been having trouble since beta where on occasion when running the setup,
it would hang at configuring firewall, even if I leave it for hours. Tonight I
decided to rebuild my VM (in virtualbox, for running the webadmin). I started
by installing Fedora 18 x86_64 from DVD with minimal
Node is based on Fedora 17, so if you have the same problem with both, that
means it is likely upstream on the Fedora end of things. Fedora 18 is due to
have support for UEFI, but release has been delayed until Jan 8th at the
earliest. If Fedora 18 works, I'd say you'll likely be able to use an
Date: Tue, 23 Oct 2012 22:00:00 +0100
From: alex.t...@gmail.com
To: users@ovirt.org
Subject: [Users] move ovirt vms from one node to other
hi,
i was wondering how it'd be possible to move a existing VM
(ovirt kvm vm) from one Ovirt node to
Date: Mon, 27 Aug 2012 09:46:18 +0200
From: w...@dds.nl
To: users@ovirt.org
Subject: [Users] ovirt node NFS
Hi all,
NOTE: Due to an
issue affecting NFS storage domains and the current Linux
3.5-based Fedora kernel, we recommend testing with a Fedora
Date: Tue, 14 Aug 2012 15:12:16 -0400
From: domi...@bostonvineyard.org
To: ricardo.m.este...@gmail.com
CC: users@ovirt.org
Subject: Re: [Users] oVirt 3.1 - Import ISO Domain
Today I had the same error both 500 and 477. I was using
ovirt-node-iso-2.5.0-2.0.fc17. I was doing a new install of
David,
Are you using the 3.5.0 kernel? There is currently an issue related to NFS
which is preventing oVirt 3.1 from working correctly. if you are using 3.5.0,
try using an older kernel and see if that works until an updated kernel is
pushed.
- Nick
From: david.elli...@shazamteam.com
To:
.
DY
From: Nicholas Kesick [cybertimber2...@hotmail.com]
Sent: Tuesday, July 31, 2012 5:38 PM
To: Daniel Yeung; oVirt Mailing List
Subject: RE: [Users] Host installation failed with error Unable to set host
time
From: dye...@trustedcs.com
To: users@ovirt.org
Date: Tue, 31 Jul
The binary directory appears to have gone missing from
http://ovirt.org/releases/, including http://ovirt.org/releases/stable/binary
which contains the 2.3.0-1.0 ovirt-node.
- Nick
___
Users mailing list
Date: Wed, 1 Aug 2012 13:27:30 -0400
From: rob...@middleswarth.net
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] binary directory missing
On 08/01/2012 12:07 PM, Nicholas Kesick
wrote:
The binary directory appears to have
Date: Tue, 31 Jul 2012 09:07:07 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] Can't add a host to a 2.2 compatibilty level cluster
On 07/31/2012 03:11 AM, Nicholas Kesick wrote:
I am unable to add a host to a 2.2 compatibilty
From: dye...@trustedcs.com
To: users@ovirt.org
Date: Tue, 31 Jul 2012 20:12:31 +
Subject: [Users] Host installation failed with error Unable to set host
time
I created a new host and the installation failed with the following messages on
the engine.log:
BSTRAP
I am unable to add a host to a 2.2 compatibilty level cluster. I'm trying to
add a host to that because it is a Pentium D system (which supports
virtualization and 64-bit), and NetBurst is only available in 2.2 w/o a
database edit.Webadmin events shows Host oVirtNode22 is compatible with
Date: Fri, 27 Jul 2012 08:08:18 +0300
From: yzasl...@redhat.com
To: cybertimber2...@hotmail.com
CC: ih...@redhat.com; users@ovirt.org
Subject: Re: [Users] jboss-as.service
On 07/27/2012 12:54 AM, Nicholas Kesick wrote:
Nicholas,
I am a bit troubled by the error that keeps appearing
Date: Thu, 26 Jul 2012 15:53:36 -0400
From: rob...@middleswarth.net
To: users@ovirt.org
Subject: Re: [Users] jboss-as.service
On 07/26/2012 03:41 PM, Nicholas Kesick
wrote:
After completing the engine-setup and waiting a few minutes, I
Date: Fri, 27 Jul 2012 00:01:36 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: rob...@middleswarth.net; users@ovirt.org
Subject: Re: [Users] jboss-as.service
On 07/26/2012 11:46 PM, Nicholas Kesick wrote
Correction.Just to confirm, as I'd like to contribute some testing (since from
the weekly meeting it seems some is needed), are all of the latest released
versions -for testing- here?
http://www.ovirt.org/releases/beta/fedora/17/ and here for ovirt-node?
Date: Thu, 26 Jul 2012 00:32:15 +0200
From: dne...@redhat.com
To: users@ovirt.org
Subject: Re: [Users] Latest RPMs, etc?
Hi,
On 07/25/2012 11:44 PM, Nicholas Kesick wrote:
Just to confirm, as I'd like to contribute some testing (since from the
weekly meeting it seems some is needed
Date: Sun, 15 Jul 2012 01:46:50 -0400
From: mkole...@redhat.com
To: ricardo.m.este...@gmail.com
CC: users@ovirt.org
Subject: Re: [Users] oVirt 3.1 - HP BL460c G6 - virtualization hardware
is unavailable
- Original Message -
Hi,
I've installed
actually, live snapshot today is only supported for disks, without the
RAM.
I can not find the button to create a snapshot for disk only in engine
3.1 beta release. Are you talking about a undergoing project?
live snapshot is for disks only, not for RAM.
so the live snapshot button
Date: Tue, 8 May 2012 11:11:36 +0300
From: dfedi...@redhat.com
To: cybertimber2...@hotmail.com
CC: mbu...@redhat.com; users@ovirt.org
Subject: Re: [Users] Adding oVirt Node Fails
On 08/05/12 06:06, Nicholas Kesick wrote:
Results of testing, round 3 (trying to get [Errno 16] Device
Subject: Re: [Users] Adding oVirt Node Fails
On 04/05/12 02:49, Nicholas Kesick wrote:
Fri, 27 Apr 2012 05:22:24 DEBUG instCert: try to delete old
certificates
Fri, 27 Apr 2012 05:22:24 DEBUG instCert: failed.
Traceback (most recent call last):
File /usr/share
in a mounted file.
Sent from my Android phone. Please ignore typos.
-Original Message-
From: Nicholas Kesick [cybertimber2...@hotmail.com]
Received: Tuesday, 08 May 2012, 0:08
To: mbu...@redhat.com, aba...@redhat.com
CC: oVirt Mailing List [users@ovirt.org]
Subject: Re: [Users
the file, which will give
you this result in a mounted file.
Sent from my Android phone. Please ignore typos.
-Original Message-
From: Nicholas Kesick [cybertimber2...@hotmail.com]
Received: Tuesday, 08 May 2012, 0:08
To: mbu...@redhat.com, aba...@redhat.com
CC: oVirt Mailing List
Date: Sat, 5 May 2012 12:29:20 +0300
From: dfedi...@redhat.com
To: cybertimber2...@hotmail.com
CC: mbu...@redhat.com; users@ovirt.org
Subject: Re: [Users] Adding oVirt Node Fails
On 04/05/12 02:49, Nicholas Kesick wrote:
Fri, 27 Apr 2012 05:22:24 DEBUGinstCert: try to delete old
Date: Fri, 4 May 2012 08:14:14 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] Host missing cpuFlags
On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
I managed to get a host successfully added into oVirt Manager (Fedora16
minimum
Actually I tried this tonight on a fresh Fedora 16 (minimal install) based on
the same wiki page and it says there is no VDSM package.#yum search vdsm
returnsvdsm-bootstrap.noarchvdsm-cli.noarchvdsm-reg.noarch Trying to install
vdsm-reg results in an error requiring vdsm. - Nick
Date: Thu, 3
Disregard that... I installed the wrong arch, hence why it didn't show.
Reinstalling x86_64 now.
From: cybertimber2...@hotmail.com
To: alou...@redhat.com; m...@linux.vnet.ibm.com
Date: Thu, 3 May 2012 20:43:16 -0400
CC: users@ovirt.org
Subject: Re: [Users] Problems when install ovirt-engine
I'm having trouble adding a oVirt Node to the oVirt Manager.The node is powered
by the oVirt Node 2.3.0 image (installed to local storage).The engine is
powered by Fedora 16 + oVirt-engine package from YUM. When I add the host,
install goes ok, and when I go to activate it everything goes
46 matches
Mail list logo
