Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, Thank you so much! It works! I found that IPMI is disable by default setting. When i enable it and run fence_ilo4 command, it showed that status is ON. [root@XX~]# ​fence_ilo4 -a X -l -p X -v -o status Executing: /usr/bin/ipmitool -I lanplus -H X -p 623 -U X

Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, Please see the following result. [root@X ~]# fence_ilo4 -a XXX.XXX.XXX.XXX -l X -p X -v -o status Executing: /usr/bin/ipmitool -I lanplus -H XXX.XXX.XXX.XXX -p 623 -U X -P X -L ADMINISTRATOR chassis power status Connection timed out [root@X~]# As you can see

Re: [ovirt-users] Power management - oVirt 4,2

On Wed, Feb 28, 2018 at 9:13 AM, Terry hey wrote: > Dear Martin, > Please see the following result. > [root@X ~]# fence_ilo4 -a XXX.XXX.XXX.XXX -l X -p X -v -o > status > Executing: /usr/bin/ipmitool -I lanplus -H XXX.XXX.XXX.XXX -p 623 -U X > -P X -L

Re: [ovirt-users] Power management - oVirt 4,2

On Fri, Feb 23, 2018 at 11:34 AM, Terry hey wrote: > Dear Martin, > I am very sorry that i reply you so late. > Do you mean that 4.2 can support ilo5 by selecting the option "ilo4" in > power management? > ​Yes ​ > "from the error message below I'd say that you are

Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, I am very sorry that i reply you so late. Do you mean that 4.2 can support ilo5 by selecting the option "ilo4" in power management? "from the error message below I'd say that you are either not using correct IP address of iLO5 interface or you haven't enabled remote access to your

Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, Thank you for helping me. To answer your question, 1. Does the Test in Edit fence agent dialog work​? Ans: it shows that "Test failed: Internal JSON-RPC error" Regardless the fail result, i press "OK" to enable power management. There are four event log appear in "Events"

Re: [ovirt-users] Power management - oVirt 4,2

Hi Terry, from the error message below I'd say that you are either not using correct IP address of iLO5 interface or you haven't enabled remote access to your iLO5 interface. According to [1] iLO5 should fully IPMI compatible. So are you sure that you enabled the remote access to your iLO5

Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, Um..Since i am going to use HPE ProLiant DL360 Gen10 Server to setup oVirt Node(Hypervisor). HP G10 is using ilo5 rather than ilo4. Therefore, i would like to ask whether oVirt power management support iLO5 or not. If not, do you have any idea to setup power management with HP G10?

Re: [ovirt-users] Power management - oVirt 4,2

On Fri, Feb 2, 2018 at 5:40 AM, Terry hey wrote: > Dear Martin, > > Um..Since i am going to use HPE ProLiant DL360 Gen10 Server to setup oVirt > Node(Hypervisor). HP G10 is using ilo5 rather than ilo4. Therefore, i would > like to ask whether oVirt power management support

Re: [ovirt-users] Power management - oVirt 4,2

On Wed, Jan 31, 2018 at 11:19 PM, Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > Hi, > > From ilo3 and up, ilo fencing agents are an alias for fence_ipmi. Try > using the standard ipmi. > ​It's not just an alias, ilo3/ilo4 also have different defaults than ipmilan. For example

Re: [ovirt-users] Power management - oVirt 4,2

Hi, >From ilo3 and up, ilo fencing agents are an alias for fence_ipmi. Try using the standard ipmi. Luca Il 31 gen 2018 11:14 PM, "Terry hey" ha scritto: > Dear all, > Did oVirt 4.2 Power management support iLO5 as i could not see iLO5 option > in Power Management. >

[ovirt-users] Power management - oVirt 4,2

Dear all, Did oVirt 4.2 Power management support iLO5 as i could not see iLO5 option in Power Management. Regards Terry ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users