You can use hostusb vdsm hook:
http://wiki.ovirt.org/VDSM-Hooks/hostusb
26.06.2014 21:37, Demeter Tibor пишет:
Hi,
Is there any possibility for using the host's usb ports for a guest?
I need to migrate a physical windows based machine that using usb tokens.
Thanks in advance.
Tibor
package: ovirt-optimizer-ui-0.1-1.fc19.noarch from ovirt-3.5-beta-sanity
unresolved deps:
ovirt-optimizer-webadmin-portal = 0:3.4
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
On 27 Jun 2014, at 06:06, Punit Dambiwal wrote:
Hi,
I don't want to faking a CPU model.my main concern is to create the
homogeneous environment,so the guest can be migrate between hosts with
diffrent CPU (If i can change the CPU model with the custom name).
Then you just want to set
Just put the CPU Model in the Cluster in ovirt.
You can't put any host in a cluster which doesn't
comply to it's cpu model, thus allowing migration
within that cluster.
HTH
Am 27.06.2014 06:06, schrieb Punit Dambiwal:
Hi,
I don't want to faking a CPU model.my main concern is to create
Hi,
while performing basic sanity test on 3.5.0 beta candidate I've seen the
following bugs:
Bug 1113882 - [ ERROR ] Failed to execute stage 'Closing up': [ERROR]::oVirt
sdk is disconnected from the server.
Bug 1113891 - storage domains are listed twice
Bug 1113898 - New Virtual Machine dialog
On Thu, Jun 26, 2014 at 11:37:54PM -0400, Brian Proffitt wrote:
Downloads of the Engine RPM file, it was determined, would be indicative of
actual oVirt installs. The allinone RPMs were not analyzed at this time,
since installing this RPM is a choice made during the installation process
Hello all,
Does anyone know how I can check if a VM's disk are indeed locked or not.
The engine tell's me they are locked but this is now already 16 day's and
counting.
I already restarted every server involved but to no avail.
I can not remove, change or start the VM as long as the disks are
On Thu, Jun 26, 2014 at 06:49:00PM -0400, Maurice James wrote:
Is it possible to pass the vmx extension to a guest?
Yes, but you need nested kvm support in the host (which is not available
in stock el6), and to install the nestedvt hook. More about it in
On Thu, Jun 26, 2014 at 10:26:27PM -0400, Maurice James wrote:
My setup is reporting that one of the NICs in a bond pair is receiving
770Mbps even though I shut it off (ifconfig em2 down). I refreshed the page
several times. I even restarted the engine just in case it was a caching
issue. I
On 06/26/14 17:20, Tiemen Ruiten wrote:
Hello,
I set up an oVirt cluster and created my first VM. However I can not
seem to get any network connectivity going. The VM is set up to receive
an IP address via DHCP. I can see the DHCP request come in on the
DHCP-server, but subsequently, the
Hi,
I have two UCS server,both are configured for power management, but
when i put host to maintenance and restart it by selecting power
managementrestart on the OVirt Manager it shows as rebooting but the host
is not really rebooting,i had the same issue with HP servers ILO2.
What should i
well if the power management test does not work, it can't work, right?
which fencing module do you use? (ipmi,ilo, etc)
you first need to get power management working, before useing it ;)
Am 27.06.2014 10:45, schrieb mad Engineer:
Also under Hostpower managementtest is failing with Test
Hi Dan,
Still the sameVM can spoof the ip address...attached is the VM domain
xml file
On Thu, Jun 26, 2014 at 5:30 PM, Punit Dambiwal hypu...@gmail.com wrote:
Hi Sven,
I already give the sudo user permission to VDSM user...
Yes..after VDSM restart i can see this hook in host
Hi All,
Noif i set the CPU model in the cluster is intel nehalam...then the
cluster doesn't allow me to add sendy bridge CPU hosts
What about if i will use the Intel CPU with AMD CPU (Mix Match)??
On Fri, Jun 27, 2014 at 3:05 PM, Sven Kieske s.kie...@mittwald.de wrote:
Just put the
- Original Message -
From: Tiemen Ruiten t.rui...@rdmedia.com
To: users@ovirt.org
Sent: Friday, June 27, 2014 10:43:03 AM
Subject: Re: [ovirt-users] network issue with vm
On 06/26/14 17:20, Tiemen Ruiten wrote:
Hello,
I set up an oVirt cluster and created my first VM.
Good morning,
I would like to ask you an information.
After I have installed ovirt, I have created a pool of vm with name
like centos-?? (from 1 to 20)
and then ovirt generated 20 vm with name centos-1, centos-2, centos-3 etc. etc.
The problem is when the vm starts the hostname is not the same of
- Original Message -
From: Punit Dambiwal hypu...@gmail.com
To: Antoni Segura Puimedon asegu...@redhat.com, Dan Kenigsberg
dan...@redhat.com
Cc: Sven Kieske s.kie...@mittwald.de, users@ovirt.org
Sent: Friday, June 27, 2014 11:07:56 AM
Subject: Re: [ovirt-users] Ip spoofing
Hi
- Original Message -
From: nicola gentile nicola.gentile...@gmail.com
To: Users@ovirt.org
Sent: Friday, June 27, 2014 11:16:51 AM
Subject: [ovirt-users] name of virtual machine and hostname
Good morning,
I would like to ask you an information.
After I have installed ovirt, I
On Fri, Jun 27, 2014 at 05:07:56PM +0800, Punit Dambiwal wrote:
Hi Dan,
Still the sameVM can spoof the ip address...attached is the VM domain
xml file
snip
yep, the hook script did not come into action.
interface type='bridge'
mac address='00:1a:4a:81:80:01'/
Hi Dan,
Please find the below :-
[root@gfs1 ~]# su - vdsm -s /bin/bash
-bash-4.1$ cd /usr/share/vdsm; python -c 'import hooks;print
hooks._scriptsPerDir(before_device_create)'
['/usr/libexec/vdsm/hooks/before_device_create/50_noipspoof']
-bash-4.1$
Antoni @ selinux already in the permissive
Well I doubt this is a solution to this,
anyway, if you want to check if it's a permission error
due to not correctly configured selinux you
could do:
grep avc /var/log/auditd/auditd.log
and configure your selinux correctly, no need to disable it.
But I doubt that the VM can spoof the ip
yes this works, if you do not need more functionality than
cloud init can provide (I must write some patches for it, when I got the
time..)
Am 27.06.2014 11:18, schrieb Antoni Segura Puimedon:
I guess that the way to go about it would be to use the cloudinit integration.
I've not tried it
Hi Gilad/Martin,
Thanks for the reply.
Let me explain the scenario in details:-
Each Host would have local filesystems and can be integrated with oVirt as
POSIX filesystems storage.
Assume each server can run maximum 6 VMs simultaneously(due to memory/CPU
constraints) and we have configured 5
On 27 Jun 2014, at 11:10, Punit Dambiwal wrote:
Hi All,
Noif i set the CPU model in the cluster is intel nehalam...then the
cluster doesn't allow me to add sendy bridge CPU hosts….
what do you mean, it doesn't allow you to add a host with a real physical
SandyBridge CPU?
that would
Hi Michal,
That means if i have the nehalam CPU Hypervisior...still i can create
cluster with sendybridgeand can join this cluster with nehalam based
hypervisior ??
On Fri, Jun 27, 2014 at 5:54 PM, Michal Skrivanek
michal.skriva...@redhat.com wrote:
On 27 Jun 2014, at 11:10, Punit
did you restart ovirt-engine service?
On 06/25/2014 05:54 AM, Koen Vanoppen wrote:
Ok, thanx.
Now when I try to remove the connection I get this:
[oVirt shell (connec...@vega.brusselsairport.aero
mailto:connec...@vega.brusselsairport.aero)]# remove
storageconnection
Hi,
I found below messages in the audit log :-
[root@gfs1 ~]# grep avc /var/log/audit/audit.log
type=AVC msg=audit(1403834461.442:266685): avc: denied { read } for
pid=27958
comm=logrotate name=core dev=dm-0
ino=789758 scontext=system_u:system_r:log
Well selinux is not your problem as you run
it in permissive mode, this means
selinux violations will get logged but
not be forbidden.
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
On 27 Jun 2014, at 12:00, Punit Dambiwal wrote:
Hi Michal,
That means if i have the nehalam CPU Hypervisior...still i can create cluster
with sendybridgeand can join this cluster with nehalam based hypervisior
??
yes, exactly
Thanks,
michal
On Fri, Jun 27, 2014 at 5:54 PM,
Il 27/06/2014 07:41, Koen Vanoppen ha scritto:
II created this document for the company where I work. Maybe it is userfull
for you too:
Migrate from VMWare to oVirt
1.On VmWare:
a.Export the VM to ovf format. There is a smb/nfs share on virt-v2v you
can use as storage.
i.
On Fri, Jun 27, 2014 at 05:36:49PM +0800, Punit Dambiwal wrote:
Hi Dan,
Please find the below :-
[root@gfs1 ~]# su - vdsm -s /bin/bash
-bash-4.1$ cd /usr/share/vdsm; python -c 'import hooks;print
hooks._scriptsPerDir(before_device_create)'
Conference: Linux.conf.au
Information: Each year open source geeks from across the globe gather in
Australia or New Zealand to meet their fellow technologists, share the latest
ideas and innovations, and spend a week discussing and collaborating on open
source projects. The conference is well
Conference: LinuxCon Europe
Information: LinuxCon is the only event covering all matters Linux - offering
collaboration and education for everyone in the ecosystem from developers and
maintainers to sys admins and architects to business executives and community
members.
Date: August 20-22, 2014
Is there anything else that I need to do beside installing those vdsm hooks? I
ask because you said that its not available in stock el6
- Original Message -
From: Dan Kenigsberg dan...@redhat.com
To: Maurice James mja...@media-node.com
Cc: users users@ovirt.org
Sent: Friday, June 27,
Looks like it cleared up after I restarted the engine and vdsm
- Original Message -
From: Dan Kenigsberg dan...@redhat.com
To: Maurice James mja...@media-node.com
Cc: users users@ovirt.org
Sent: Friday, June 27, 2014 4:33:43 AM
Subject: Re: [ovirt-users] Spam Misreporting network
I just did that at:
http://www.ovirt.org/Vm_migration_from_vmware
feel free to make this pretty, it's more or less just a raw dump of the
mail.
Am 27.06.2014 13:40, schrieb Sandro Bonazzola:
Can you create a page on oVirt Wiki?
I think it may be useful to have this there too.
Thanks!
--
well on el6 this won't work, due to missing support of passing on the
nested-vt flag, you could run a newer libvirt/kvm version on your el6
installation, if you really want/need this, but I would not encourage
you to do so.
Am 27.06.2014 14:14, schrieb Maurice James:
Is there anything else that
Can anyone shed any light for me?
- Original Message -
From: Maurice James mja...@media-node.com
To: users users@ovirt.org
Sent: Thursday, June 26, 2014 6:20:23 PM
Subject: [ovirt-users] Spam Cluster Polcies
Can someone explain the cluster policies to me? The explanation at
On 06/27/14 11:16, Antoni Segura Puimedon wrote:
- Original Message -
From: Tiemen Ruiten t.rui...@rdmedia.com
To: users@ovirt.org
Sent: Friday, June 27, 2014 10:43:03 AM
Subject: Re: [ovirt-users] network issue with vm
On 06/26/14 17:20, Tiemen Ruiten wrote:
Hello,
I set up an
I am still in process of parsing out the mirror downloads, and would appreciate
any insights you might have to accomplish this.
BKP
- Original Message -
From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl
To: Brian Proffitt bprof...@redhat.com
Cc: users
Hi Tiemen,
have you checked for general network setup issues? Sorry, can only guess
here.
To check oVirt I suggest to create another VM with a DHCP server.
Example: I recently had quite the same problem - it turned out the DHCP
server used the wrong gateway. Vlans where configured routed in the
Hi,
I am using Cisco UCS C200 M2 as Host running Centos 6.5 and KVM,
Power Management not working properly,hence even with Node down Ovirt shows
VM as still up,with uptime of VM increasing(on the manager)
if i continue and save the changes its causing problems:
1. HA is not working (
On 06/27/2014 09:14 AM, Maurice James wrote:
Is there anything else that I need to do beside installing those vdsm hooks? I
ask because you said that its not available in stock el6
You need to check if nested KVM support is enabled on your machine
cat /sys/module/kvm_intel/parameters/nested
I remember reading someone was working on putting together a kinda
starter kit for doing a presentation on oVirt. Can someone point me at
those resources. I recent joined a maker (hacker) space in my area and
part of what they do is workshops on different thing I would like to do
a workshop on
Hello,
But it's in the roadmap a gui converter v2v, or better, insert a menu in
the manager where i can import several type of vm like .ovf or .vmk
Thanks,
Massimo
2014-06-27 13:40 GMT+02:00 Sandro Bonazzola sbona...@redhat.com:
Il 27/06/2014 07:41, Koen Vanoppen ha scritto:
II created this
Hello Robert,
On 06/27/2014 03:00 PM, Robert Middleswarth wrote:
I remember reading someone was working on putting together a kinda
starter kit for doing a presentation on oVirt. Can someone point me at
those resources. I recent joined a maker (hacker) space in my area and
part of what they
More info from vdsClient -s 0 getVdsStats
ksmCpu = 0
ksmPages = 64
ksmState = False
memAvailable = 26894
memCommitted = 4161
memFree = 27540
memShared = 750366
memUsed = '86'
momStatus = 'active'
netConfigDirty = 'False'
Hi,
Is it possible to tune time required to reboot VM in case of host
failures.
in our test we powered off one of the Host.
Manager was still showing both Guest and Host as UP for around 5 minutes
and after that it took another 4-5 minutes to start VM.
Is there any tunable parameter
48 matches
Mail list logo
