Hi All,
I have hosted engine setup with glusterfs as my storage domain.
when i move a storage domain to maintenance and activate it again i see
that there are two glusterfs process running for every storage domain.
Is this expected behaviour or a bug ?
root 27143 0.0 0.0 451308
Outstanding! Thank you Sahina! Your assistance is much appreciated.
When I saw your email it reminded me that the versions were different and I was
having an issue with reaching the internet from the engine storage servers. A
DNS issue between my private DNS server and my organization's DNS
Thank you Simone!
-Original Message-
From: Simone Tiraboschi [mailto:stira...@redhat.com]
Sent: Tuesday, May 3, 2016 12:34 AM
To: Langley, Robert
Cc: users@ovirt.org
Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute
On Mon, May 2, 2016
I just do a full clone of the whole VM and the clone is running fine and
have the last data on all disks.
gruss ivo
On 03.05.2016 20:12, Markus Stockhausen wrote:
Hi,
we've seen a lot of trouble when deleting snapshots of multidisk VMs.
Especially endless running snapshot deletions is one
Salü Markus
Yes, i saw also some postings arround, but no solution and all of them
was a bit different than our situation.
The VM is always responsible, as long as we don't shut it down.
I need to have a focus on it, but I think when I do it like this:
delete all snapshots
moving 1st Disk
Hi,
we've seen a lot of trouble when deleting snapshots of multidisk VMs.
Especially endless running snapshot deletions is one of our culprits.
More here: https://bugzilla.redhat.com/show_bug.cgi?id=1319400
Markus
Von: users-boun...@ovirt.org
Hi oVirt List
We have the problem, that two of our VM's have "Locked" snapshots and we
can't go forward. From 10 VM's which we move from one store to another,
we have problems with 5 of them to delete the snapshots. But with a lot
of luck, the snapshot was always on the dedicated Swap-Disk,
> >
> > Is it possible now to search for groups instead of users / manipulate
> > groups in the web interface ?
> Sure, if you type some search term into UI users/permissions dialog it
> will also search for groups.
Thank you for all your answers, we can say my problem is now solved
>Note in
Hi Yedidyah,
The conf.d folder is all name with foreman config file, all related with
Ovirt is gone.
I try to run the given command and it try to setup a new https webadmin
portal? I afraid the previous before install foreman the webadmin portal
running with all the VM and configuration will it
On Tuesday, May 03, 2016 03:58:27 PM Ondra Machacek wrote:
> On 05/03/2016 03:13 PM, Alexis HAUSER wrote:
> >> Or do you use rfc2307? You can find out running this command:
> >> LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
> >>
> >> 'ou=people,o=unix,dc=somewhere,dc=any' -D
> >>
On 05/03/2016 03:13 PM, Alexis HAUSER wrote:
Or do you use rfc2307? You can find out running this command:
LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
'ou=people,o=unix,dc=somewhere,dc=any' -D
'cn=mysearchuser,ou=admin,o=unix,dc=somewhere,dc=any' -W
>Or do you use rfc2307? You can find out running this command:
> LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
>'ou=people,o=unix,dc=somewhere,dc=any' -D
>'cn=mysearchuser,ou=admin,o=unix,dc=somewhere,dc=any' -W
>'(&(objectClass=posixAccount)(uid=*)(uid=myuser))'
>If ^this
On 05/03/2016 11:58 AM, Alexis HAUSER wrote:
Thank you, now I see the correct namespace shown, but still no way to login
with any user...Any idea ?
Hard to say without logs, can you please share log output of
ovirt-engine-extensions-tool?
Please run it with:
ovirt-engine-extensions-tool
Hello,
I attach to this thread to detail how I was able to have serial console
working both on CentOS 6.7 and CentOS 7.2 VMs on 3.6.5
- CentOS 6.7
Basically what described in general here (but using ttyS0 instead ttyS1):
http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-console/
So in
On 05/03/2016 11:03 AM, Alexis HAUSER wrote:
However, I can't login with any user...But with ldapsearch I can find those
users with uid=user
I used ovirt-engine-extensions-tool aaa login-user --profile=xxx
--user-name=xxx
and I realize now what is the problem : the available namespaces
>> However, I can't login with any user...But with ldapsearch I can find those
>> users with uid=user
>>
>> I used ovirt-engine-extensions-tool aaa login-user --profile=xxx
>> --user-name=xxx
>> and I realize now what is the problem : the available namespaces shows the
>> wrong dn. It should
On 05/03/2016 10:28 AM, Alexis HAUSER wrote:
Are you sure you've specified correct CA?
Can you try running this command:
LDAPTLS_CACERT=your_ldap_ca_cert.crt ldapsearch -H ldaps://@HOST@ -x
-D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'
If it fail then most probably you have incorrect CA
>Are you sure you've specified correct CA?
>
>Can you try running this command:
> LDAPTLS_CACERT=your_ldap_ca_cert.crt ldapsearch -H ldaps://@HOST@ -x
>-D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'
>
>If it fail then most probably you have incorrect CA certificate.
>If it succeed, please open bug
On 3/5/2559 13:25, knarra wrote:
On 05/03/2016 08:35 AM, Wee Sritippho wrote:
Hi,
I'm making a fresh hosted-engine installation on 3 hosts. First 2
hosts succeeded, but the 3rd one stuck at termination state
"Installing Host hosted_engine_3. Stage: Termination.", then, 3
minutes later,
On Mon, May 2, 2016 at 9:15 PM, Gianluca Cecchi
wrote:
>
>
> On Mon, May 2, 2016 at 8:39 PM, Gianluca Cecchi
> wrote:
>>
>> On Mon, May 2, 2016 at 11:14 AM, Simone Tiraboschi
>> wrote:
>>>
>>>
>>> >>>
>>> >>> Can you
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert
wrote:
> Hi Sahina,
>
>
>
> Thank you for your response. Let me know if you’ll need any of the log
> before the Storage Configuration section. I looked at this earlier and I was
> wondering why, after choosing to use
On Tue, May 3, 2016 at 5:05 AM, Wee Sritippho wrote:
> Hi,
>
> I'm making a fresh hosted-engine installation on 3 hosts. First 2 hosts
> succeeded, but the 3rd one stuck at termination state "Installing Host
> hosted_engine_3. Stage: Termination.", then, 3 minutes later, "VDSM
On 05/03/2016 08:35 AM, Wee Sritippho wrote:
Hi,
I'm making a fresh hosted-engine installation on 3 hosts. First 2
hosts succeeded, but the 3rd one stuck at termination state
"Installing Host hosted_engine_3. Stage: Termination.", then, 3
minutes later, "VDSM hosted_engine_3 command failed:
Command that failed to execute from your hosted-engine node - "gluster
volume info engine-vol --remote-host gsave0.engine.local"
Can you check the glusterfs versions on the hosted-engine node and
gsave0.engine.local node - are they the same?
On 05/02/2016 11:08 PM, Langley, Robert wrote:
On Tue, May 3, 2016 at 5:10 AM, Francis Yap wrote:
> Hi All, my ovirt web admin page overwrite by the foreman installation, I
> have remove the foreman but ovirt admin page still not found, the running VM
> and engine are not affect.
>
> How do I recovery the admin page?
What
25 matches
Mail list logo