Can you explain state of your setup now. May be a screen shot of the 'Hosts'
tab and logs from /var/log/ovirt-engine/engine.log should help us to understand
the situation there.
Regards,
Ramesh
- Original Message -
> From: "Thing"
> To: "users"
Ok, I have struggled with this for 2 hours now, glusterp2 and the ovirt
server are basically not talking at all. I have rebooted both, I dont know
how many times. Reading via google there seems to be no fix for this bar a
manual hack of the ovirt server's database to delete the host glusterp2?
Hi Anantha,
On 10/26/2016 09:41 AM, Anantha Raghava wrote:
Hello Kasturi,
I download and installed. But not getting any option to setup the engine
information.
That's correct, in 4.0 we register the host from engine.
When I try to add host from engine, it is reporting as the
target is a
Hello all
I have just imported physical machine into my export datastore using
virt-p2v. While I was importing it, my hosted-engine died (VM went into
paused state) during the disk-copy stage.
Now, that half-imported VM is in the status "image locked" and I am un able
to do anything with it. The
Hi,
This could be a bug or a configuration issue, I'm not too sure yet. At the
moment if I apply group permissions using the PowerUserRole to the cluster
itself, then any VMs created in the user portal by users in that group don't
get the UserVmManager role applied correctly. The user,
from the engine log I see,
2016-10-27 13:45:24,595 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand]
(DefaultQuartzScheduler2) [3877c2ef] START,
GetGlusterHostUUIDVDSCommand(HostName = glusterp1,
VdsIdVDSCommandParametersBase:{runAsync='true',
What does gluster peer status say on each host?
Tom Gamull
Red Hat | Solutions Architect
(404) 494-0280 | @magicalyak
> On Oct 26, 2016, at 8:55 PM, Tom Gamull wrote:
>
> This is pointing to network connectivity issues
>
> You can look at logs under /var/logs/ovirt-*
>
>
This is pointing to network connectivity issues
You can look at logs under /var/logs/ovirt-*
Check your dns and make sure the hosts can connect to each other. You can
restart the host, mark it as restarted in the manager and then activate it.
Worst case, you can remove it using hosted-engine
While trying to figure out how to deploy storage I put 1 host into
maintenance mode, trying to re-activate it and its failed.
It seems to be stuck as neither in activated nor maintenance, so how would
I go about fixing this?
So what log(s) would this be written to?
On 10/26/2016 06:31 PM, Beckman, Daniel wrote:
I have been updating our oVirt 3.6 (3.6.7.5-1) environment in
preparation for upgrading to oVirt 4.
We had been using the legacy AD connection (via engine-manage-domains),
and since that’s no longer available in oVirt 4, this was a priorty. (I
Is it possible to "pivot" up or down guests from one instance of Manager to
another instance of Manager by detaching the data storage domain from the
source Manager's data center and attaching it to the destination Manager's
data center? I tried this with a block type storage domain, but there are
On 10/26/2016 12:01 PM, nicola.gentile.to wrote:
Hi,
I would like to submit a problem with active directory authentication.
Let me make an introduction.
Actually my infrastructure consists in 1 manager and 2 nodes (version
4.0.4).
The active directory forest consists in many subdomains.
In the
On 10/26/2016 04:49 PM, Woodward, Paul wrote:
Hi,
This could be a bug or a configuration issue, I’m not too sure yet. At
the moment if I apply group permissions using the PowerUserRole to the
cluster itself, then any VMs created in the user portal by users in that
group don’t get the
I have been updating our oVirt 3.6 (3.6.7.5-1) environment in preparation for
upgrading to oVirt 4.
We had been using the legacy AD connection (via engine-manage-domains), and
since that’s no longer available in oVirt 4, this was a priorty. (I put this
off as long as I could – I found the new
hi user,
I'm planning to update my virutalization and to fix some system
incompatibility.
we've been using this kind of setup since 2014 and as of now we're not
having some problem.
the system incompatibility that I mention is that, at first my ovirt-engine
base os is CentOS 6.7 and my
That’s it! Some background: within our IT department most of us have a regular
user account and an administrative account. For the later account type, the UPN
and SAM account name happen to be the same (e.g. jdoead...@example.com) whereas
for regular users UPN is something like
Hello,
There were one vm with Video Type = CYRRUS and Graphics protocol = SPICE
(which is probably illegal combination). I have changed it do QXL, SPICE
(Single PCI is checked) and I was able to change cluster compatibility
level without problems.
Thanks a lot for advice!
Cheers, Jiri
On 10/20/2016 03:14 PM, Alexander Wels wrote:
> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
On 18 Oct 2016, at 15:56, Alexander Wels wrote:
On Tuesday, October 18, 2016 3:44:31 PM EDT
Hi,
I would like to submit a problem with active directory authentication.
Let me make an introduction.
Actually my infrastructure consists in 1 manager and 2 nodes (version
4.0.4).
The active directory forest consists in many subdomains.
In the active directory forest there are 2 type of
Hi Anzar ,
There is a bug for this misleading second log message :
https://bugzilla.redhat.com/show_bug.cgi?id=1314377
which is being handled for the next version.
since the second host is not available as a virtual machine a proper
message should reflect that instead of the current one you get
On 10/26/2016 06:17 PM, Anantha Raghava wrote:
Hi,
Where do we download a working oVirt Node ISO? Not finding the correct
link.
--
Thanks & Regards,
Anantha Raghava
eXza Technology Consulting & Services
Do not print this e-mail unless required. Save Paper & trees.
Dear Team,
I am getting the below error during the hosted-Engine HA testing.
Error while executing action:
1. HostedEngine:
* Cannot migrate VM. There is no host that satisfies current
scheduling constraints. See below for details:
* The host hosted_engine_1 did not satisfy
Hi,
Where do we download a working oVirt Node ISO? Not finding the correct link.
--
Thanks & Regards,
Anantha Raghava
eXza Technology Consulting & Services
Do not print this e-mail unless required. Save Paper & trees.
___
Users mailing list
I’ve done the same. You may get some shutdown issues with this approach on
sanlock so if this is more of a home lab and you shutdown a lot sometimes the
following helps
systemctl stop ovirt-ha-agent ovirt-ha-broker
systemctl stop vdsmd
systemctl stop sanlock
systemctl stop nfs
systemctl power
I did install a server certificate from a private CA on the engine server
for the oVirt 4 Manager GUI, but haven't figured out how to configure
engine to trust the same CA which also issued the server certificate
presented by vdsm. This is important for us because this is the same server
On Tue, Oct 25, 2016 at 10:04 PM, Jonas Israelsson
wrote:
> Here's the original volume metadata
...
> FORMAT=RAW
> SIZE=67108864
> TYPE=PREALLOCATED
...
> And here's the LV
...
> LV Creation host, time moe.mgmt.elementary.se, 2016-01-18 12:06:48 +
> LV Size
The process finished successfully, took about 4 hours per vm, not sure if
this is typical or not, but this being our first test run i was afraid that
it may have stopped and was unsure. I will check the VDSM.log file on the
next test migration i do.
Thanks
-Original Message-
We have oVirt 3.6.7 and I am preparing to upgrade to 4.0.4 release. I read the
release notes (https://www.ovirt.org/release/4.0.4/) and noted comment #4 under
“Install / Upgrade from previous version”:
If you are using HTTPS certificate signed by custom certificate authority,
please take a
any idea why the ssh keys are failing?
On 27 October 2016 at 11:08, Thing wrote:
> oopsie " Are the three hosts subscribed to the ovirt repos?"
>
> no, I will try again doing so. I didnt notice this as a requirement so I
> assumed the method was the ovirt server
oopsie " Are the three hosts subscribed to the ovirt repos?"
no, I will try again doing so. I didnt notice this as a requirement so I
assumed the method was the ovirt server uploaded the needed packages to
each host.
On 26 October 2016 at 17:52, Sahina Bose wrote:
> If
Hello Kasturi,
I download and installed. But not getting any option to setup the engine
information. When I try to add host from engine, it is reporting as the
target is a hypervisor host and terminating the setup. How do I proceed
further?
--
Thanks & Regards,
Anantha Raghava
eXza
Hi Anzar,
the "is not a hosted engine host" part usually means the hosted engine
score of that host is zero. You can check the score in the General subtab
for the host.
The reason for the score being zero might be that the engine hasn't noticed
the deployment yet or something failed on the host.
On Oct 26, 2016 11:51 PM, "Bryan Sockel" wrote:
>
> The process finished successfully, took about 4 hours per vm, not sure if
this is typical or not, but this being our first test run i was afraid that
it may have stopped and was unsure. I will check the VDSM.log file on
33 matches
Mail list logo