Installed manageIQ yesterday, looks like it's going to cover my needs
thanks for suggesting it.
On 4 September 2018 at 13:06, femi adegoke wrote:
> Just an FYI:
> The Glance registry does not have the latest current stable release which
> is Gaprindashvili-4
>
HI,
I re-installed the cluster and got the hosted engine deployed succesfully.
Thank you for your assistance
On Thu, Sep 6, 2018 at 1:54 PM, Sakhi Hadebe wrote:
> Hi Simone,
>
> Yes the ownership of /var/log/ovirt-imageio-daemon is vdsm:kvm, 755.
>
> Below is the version of the ovirt packages
On Tue, Sep 11, 2018 at 11:45 AM Kaustav Majumder
wrote:
>
>
> On Mon, Sep 10, 2018 at 9:07 PM wrote:
>
>> Hello People,
>> I have a 3 node cluster this just has virt service
>> deployed, how would I add gluster service to this.
>
> You can try this.
> 1. Mark all your
Hi,
I am also looking for the same. I want to install ManageIQ VM on hosted-engine
environment. I used the documents available on ManageIQ website, but I while
uploading the OVA, its saying “no valid VM config found”
Is there any other guide to launch ManageIQ as VM on Ovirt?
From:
On Tue, Sep 11, 2018 at 6:47 AM, Keith Winn
wrote:
> Hi,
>
> I am looking at using Ovirt on a single machine. I used to use the
> all-in-one setup a while ago. I have only two vms and setting up two
> servers and a storage is out of my budget right now. The all in one
> solution sounds good,
I just followed the ManageIQ guide linked in my previous message.
Uploaded the disk and attached it to a new VM (I checked the OS box to make
the disk bootable), added extra storage for the DB and launched the VM
On 11 September 2018 at 09:20, wrote:
> Hi,
>
> I am also looking for the same. I
Hi,
I can't upload iso image from webui,always got "Paused by System"
system info:
engine:4.2.6.4-1.el7
vdsm:4.20.35-1.el7
imageio-proxy:1.4.4-0.el7
imageio-daemon:1.4.4-0.el7
operation:
1、download and install ca to the browser
2、select iso file to upload
3、click
On Tue, Sep 11, 2018 at 1:52 PM, Sahina Bose wrote:
>
>
> On Tue, Sep 11, 2018 at 2:13 AM, wrote:
>
>> It seems that a vm with 3 disks boot in domain engine another disk in
>> domain vol1 and a third in domain v3 became non responsive when one gluster
>> host went down.
>> To explain a bit the
On Tue, Sep 11, 2018 at 2:13 AM, wrote:
> It seems that a vm with 3 disks boot in domain engine another disk in
> domain vol1 and a third in domain v3 became non responsive when one gluster
> host went down.
> To explain a bit the situation I have 3 glusterfs hosts with 3 volumes
> hosts are
On Mon, Sep 10, 2018 at 9:07 PM wrote:
> Hello People,
> I have a 3 node cluster this just has virt service
> deployed, how would I add gluster service to this.
You can try this.
1. Mark all your existing hosts in Maintenance
2.Go to Clusters -> select your cluster -> edit
Brett,
Did you install ManageIQ in a vm?
What instructions or guides did you follow?
On Sep 10 2018, at 11:13 pm, Maton, Brett wrote:
>
> Installed manageIQ yesterday, looks like it's going to cover my needs thanks
> for suggesting it.
>
> On 4 September 2018 at 13:06, femi adegoke
Hi Femi,
Yes, I installed it on an oVirt VM using this guide:
http://manageiq.org/docs/reference/latest/doc-Installing_on_Red_Hat_Virtualization/miq/
On 11 September 2018 at 07:18, femi adegoke wrote:
> Brett,
>
> Did you install ManageIQ in a vm?
> What instructions or guides did you
5) When will there be proper support for the newer non-GRID GPU's?
6) GPU passthrough: where can we find info on "proper PCI pasthrough capability
and enablement in Host edit dialog (and some kernel cmdline changes depending
on your hw)"?
On Sep 11 2018, at 4:54 am, Michal Skrivanek
wrote:
>
I'm on oVirt 4.2.6.
1) If I have a Tesla P4 (Pascal) GPU (non-GRID), do I use nVidia vGPU driver
for RHEL KVM 6.2 or the Linux KVM vGPU 6.2 driver?
2) If I have a Grid K1 or K2, I assume the correct driver would be GRID 4.7?
3) Must the vGPU driver be installed on the host & in the vm?
4)
Hello,
I am running 4.2.6 and I can't seem to clone a snapshot of vm when
it's running, when I click the clone button it gives an
Uncaught exception occurred. Please try reloading the page. Details: Exception
caught: (TypeError) : Cannot read property 'K' of null
Please have your
> On 11 Sep 2018, at 13:39, femi adegoke wrote:
>
> I'm on oVirt 4.2.6.
>
> 1) If I have a Tesla P4 (Pascal) GPU (non-GRID), do I use nVidia vGPU driver
> for RHEL KVM 6.2 or the Linux KVM vGPU 6.2 driver?
itf it’s not a GRID-capable card then you can only use GPU Passthrough (the
whole
On 09/10/2018 10:06 PM, adam...@adagene.com.cn wrote:
Thanks Javier. looks like that is a bug. waiting for ovirt
developers to fix this bug.
Hi Adam,
It could also be a browser thing, did you try with different ones?
Florent,
Don't forget, you need 1 IP address, 192,168.176.x for the Hosted Engine.
This blog post is slightly dated, it still has a lot of relevant information.
https://www.ovirt.org/blog/2018/02/up-and-running-with-ovirt-4-2-and-gluster-storage/
___
You do not need to define the gluster IPS or hostnames during the initial
deployment. You deploy first then you setup the gluster network after.
Serafh for the up and running with Ovirt 4.2 glusterfs guide, it's slightly
dated but goes over how to setup the separate gluster network.
On Tue, Sep
Javier, Yes, it works in IE 11. Thank you.
I always think that Firefox is the best compatible browser, but ovirt does not
full support it. I hope that developers can improve the compatibility of ovirt.
my firefox version 62.0 x64 in Windows 7.
yours Adam
From: Javier Coscia
Date:
Hello,
I want to deploy ovirt (hosted engine) and gluster on three servers. I
have thought about a configuration but I'm not sure that it's the most
suitable one.
All the servers have 2 ten gigabit Ethernet nic.
I read that, am besten, I must dedicate one nic for the storage and
another one
On Sun, Sep 9, 2018 at 10:15 AM Simone Tiraboschi
wrote:
> Now we have a specific ansible role for that:
> https://github.com/oVirt/ovirt-ansible-shutdown-env
>
>
Nice to see this Simone, thanks.
I'm reading the info to try on an hosted engine setup and find this:
"
This role has be
I've just upgraded our ovirt engine server to ovirt 4.6 and it appears
that LDAP logins no longer work. When I attempt to log in using an AD
account the following errors are shown in the engine log.
2018-09-11 10:03:44,610-04 ERROR
[org.ovirt.engine.core.sso.servlets.InteractiveAuthServlet]
For those wondering, I was able to fix this by running
ovirt-engine-extension-aaa-ldap-setup and setting the CA certificate
method to "Insecure".
> Please select method to obtain PEM encoded CA certificate (File, URL,
Inline, System, Insecure): Insecure
I was previously using "System" but that
Hi,
I defined additional operating systems in my oVirt 4.2.6 installation
according to
https://www.ovirt.org/develop/release-management/features/virt/os-info/.
Now i want to have custom default icons for use in VM portal for these
new OS definitions. How can i do this? I only found a way to
Cool, it is good to know that I was on the right track. Thanks Again.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
You would need three servers for gluster based hyperconverged oVirt
deployment.
On Tue, Sep 11, 2018, 8:41 PM Keith Winn wrote:
> Cool, it is good to know that I was on the right track. Thanks Again.
> ___
> Users mailing list -- users@ovirt.org
> To
Hi, we are seeing some issues where our hosts oom kill glusterd after a
while but there's plenty of memory?
Running Centos 7,4.x and Ovirt 4.2.x
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy
I know about this bug, but this is not what I 've experienced. The virtual
machine was up and running, I did not try to start it..
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
29 matches
Mail list logo