[ovirt-users] Re: oVirt 4.3 RC2 test on single host HCI --> OK

[Gobinda Das]

Hi Sahina,
I think the addition of storage domain may be missing? Gobinda?
Yes, For Single node deployment, auto add storage domain is missing. I will
add it.

On Wed, Jan 16, 2019 at 9:38 PM Gianluca Cecchi 
wrote:

> On Wed, Jan 16, 2019 at 4:59 PM Sahina Bose  wrote:
>
>> On Wed, Jan 16, 2019 at 8:24 PM Gianluca Cecchi
>>  wrote:
>> >
>> > Just tested what in subject on a vm (so it has been a nested env)
>> configured with 2 disks: 1x60Gb for OS and 1x100Gb for gluster.
>> > Used node ng from ovirt-node-ng-installer-4.3.0-2019011608.el7.iso and
>> almost all the problems had with RC1 here:
>> > https://www.mail-archive.com/users@ovirt.org/msg52870.html
>> > have gone solved.
>> > The hosted engine deploy completed successfully and I'm able to access
>> engine web admin and see the VM and its storage domain and connect to
>> console.
>> >
>> > The only persisting problem is that I choose JBOD in my disk config
>> (because I have only one disk) and the deploy gives error about missing
>> diskcount parameter in ansible playbook, so I have to edit the gdeploy conf
>> file from the gui and add the section
>> >
>> > [diskcount]
>> > 1
>> >
>> > after that all goes well.
>> > Good job guys!
>> >
>> > BTW: is it correct hat for data and vmstore I only have the volumes
>> configured, while I have to manullay create storage domains?
>>
>> I think the addition of storage domain may be missing? Gobinda?
>>
>> >
>> > If I want to extend this initial configuration to 3 nodes, what would
>> be the installation path to execute?
>>
>> You can add the additional hosts via engine, and expand the volume.
>> The bricks are laid out differently - as there's no option to create
>> multiple bricks on engine UI. We did have an expand volume planned in
>> the gluster management dashboard in Cockpit, I don't recollect if it
>> made it to 4.3.
>>
>>
> My only need at this time is to install the same iso on 2 additional hosts
> configured with the same hw: 1x60Gb disk for os and 1x100Gb for Gluster,
> and add them to the infra so that I will have the same volumes with the
> same size, but distributed on the three nodes, without interruption of
> service from current config.
> One of the two additional nodes will work as arbiter
>
> Thanks,
> Gianluca
>


-- 


Thanks,
Gobinda
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5W7IL5VXWFFEB673XV5XQ7DMGSWDQ455/

[ovirt-users] Re: oVirt Node install - kickstart postintall

[Ryan Barry]

The quick answer is that operations in %post must be performed before
'nodectl init'. If that's done, they'll happily stick.

On Mon, Jan 14, 2019, 9:29 PM Brad Riemann  Can you send over the whole %post segment i via pastebin? I think i've run
> across something similar that i addressed, but just want to be sure.
>
>
> Brad Riemann
> Sr. System Architect
> Cloud5 Communications
>
> --
> *From:* jeanbapti...@nfrance.com 
> *Sent:* Friday, January 11, 2019 1:51:14 AM
> *To:* users@ovirt.org
> *Subject:* [ovirt-users] oVirt Node install - kickstart postintall
>
> CAUTION: This email originated from outside of CLOUD5. Do not click links
> or open attachments unless you recognize the sender and know the content is
> safe.
>
>
> Hello everybody,
>
> Since days, I'm trying to install oVirt (via Foreman) in network mode
> (TFTP net install).
> All is great, but I want to make some actions in postinstall (%post).
> Some actions are relatated to /etc/sysconfig/network-interfaces and
> another action is related to root authorized_keys.
>
> When I try to add pub-key to a created  authorized_keys for root, I work
> (verified into anaconda.
> But after installation and anaconda reboot, I've noticed all my %post
> actions in /(root) are discared. After reboot, there is nothing in
> /root/.ssh for example.
> Whereas, in /etc, all my modications are preserved.
>
> I thought to a Selinux relative issue, but It is not relative to  Selinux
>
> I miss something. Please can you help to  understand how oVirt install /
> partition work ?
>
> thanks for all
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/BCQEKHCPSFDEFDPI4OVSXRTJS3BSJH5R/
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TGT7K3N245SH37OIKCTG75WI5PM46OOI/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6EFH7W5L6R6PZ3UADFU5ZQUKT2Y543NX/

[ovirt-users] Re: Windows 10 VM Virtio Drivers

[Colin Coe]

Have you uploaded the .vfd file to the ISO domain?

On Thu, Jan 17, 2019 at 9:26 AM Sebastian Antunez N. <
antunez.sebast...@gmail.com> wrote:

> Hello Guys
>
> In my enviroment Ovirt 4.2 when create a new VM with Windows 10, in the
> boot options menu, add the Floppy Disk for mount virtio driver but only
> show me sysprep.
>
> I check in my ISO Folder and show all vfd drivers for Windows and ISO but
> I can not add the drivers who floppy.
>
> This problem only is with Windows VM.
>
> Any idea because this is issue.
>
> Regards
>
> Sebastian
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HRMP6A4WSCZR4IO2S6VRNY7OSSPJJNDZ/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LCKISMJTFSBCBTG7QMJHEZQV3ESJKBOX/

[ovirt-users] Windows 10 VM Virtio Drivers

[Sebastian Antunez N.]

Hello Guys

In my enviroment Ovirt 4.2 when create a new VM with Windows 10, in the
boot options menu, add the Floppy Disk for mount virtio driver but only
show me sysprep.

I check in my ISO Folder and show all vfd drivers for Windows and ISO but I
can not add the drivers who floppy.

This problem only is with Windows VM.

Any idea because this is issue.

Regards

Sebastian
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HRMP6A4WSCZR4IO2S6VRNY7OSSPJJNDZ/

[ovirt-users] Re: migrate hosted-engine vm to another cluster?

[Alex McWhirter]

I second this, it's one of the reasons i really dislike hosted engine. I
also see a need for active / passive engine clones to exist perhaps even
across multiple datacenters. Hosted engine tries to be similar to
VMWare's VCenter appliance, but falls short in the HA department. The
best you can get is that engine will restart on another node should it's
current node fail. When people ask me hosted vs baremetal engine, i
almost always advocate for baremetal if there's enough rack space as
there are just too many way's i've seen hosted engine become a brick. 

FWIW, we run baremetal engine with drbd, pacemaker, and corosync across
a few machines in an active / passive setup. This has been by far the
most reliable way we've seen to HA the engine. We have these machines
spread out over a few different DC's with pacemaker triggering routing
changes to ensure it's always available. Certainly not the easiest way
to do it, but i have yet to see a better solution. 

On 2019-01-16 19:39, Ryan Barry wrote:

> Re-raising this for discussion. 
> 
> As I commented on the bug, Hosted Engine is such a special use case in terms 
> of setup, configuration, and migration that I'm not sure engine itself is the 
> right place to handle this. We have the option of changing the ha 
> broker|agent to use the engine API to initiate migrations, but there's still 
> a risk that the hosts in the secondary cluster will not be able to reach the 
> storage, etc. 
> 
> It would be great to get this resolved if there's not currently a way to do 
> it, but we need to decide on a long-term direction for it. Currently, HE can 
> run on additional hosts in the datacenter as an emergency fallback, but it 
> reverts once the HE cluster is back out of maintenance. My ideal would be to 
> extend the hosted-engine utility with an additional parameter which reaches 
> out to the Engine API in order to handle the needed database updates after 
> some safety checks (probably over ansible) to ensure that the HE storage 
> domain is reachable from hosts in the other cluster. 
> 
> But I'm not a hosted engine expert. Is there currently a way to do this? If 
> there isn't, do we want to add additional logic to ha agent|broker, or reach 
> out to the Engine? 
> 
> On Tue, Jan 15, 2019 at 8:27 AM Douglas Duckworth  
> wrote: 
> 
> Hi 
> 
> I opened a BugZilla at https://bugzilla.redhat.com/show_bug.cgi?id=1664777 
> but no steps have been shared on how to resolve.  Does anyone know how this 
> can be fixed without destroying the data center and building a new hosted 
> engine? 
> 
> Thanks, 
> 
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit [1] 
> Weill Cornell Medicine 
> 1300 York Avenue 
> New York, NY 10065 
> 
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690 
> 
> On Wed, Jan 9, 2019 at 10:22 AM Douglas Duckworth  
> wrote: 
> Hi 
> 
> Should I open a Bugzilla to resolve this problem? 
> 
> Thanks, 
> 
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit [1] 
> Weill Cornell Medicine 
> 1300 York Avenue 
> New York, NY 10065 
> 
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690 
> 
> On Wed, Dec 19, 2018 at 1:13 PM Douglas Duckworth  
> wrote: 
> Hello 
> 
> I am trying to migrate my hosted-engine VM to another cluster in the same 
> data center.  Hosts in both clusters have the same logical networks and 
> storage.  Yet migrating the VM isn't an option.
> 
> To get the hosted-engine VM on the other cluster I started the VM on host in 
> that other cluster using "hosted-engine --vm-start."   
> 
> However HostedEngine still associated with old cluster as shown attached.  So 
> I cannot live migrate the VM.  Does anyone know how to resolve?  With other 
> VMs one can shut them down then using the "Edit" option.  Though that will 
> not work for HostedEngine. 
> 
> Thanks, 
> 
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit [1] 
> Weill Cornell Medicine 
> 1300 York Avenue 
> New York, NY 10065 
> 
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690
 ___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/J2GZK5PUBZIQLGLNZ2UUCSIES6HSZLHC/


-- 

Ryan Barry 

Associate Manager - RHV Virt/SLA 

 rba...@redhat.comM: +16518159306 [2] IM: rbarry 

 [3]

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

[ovirt-users] Re: migrate hosted-engine vm to another cluster?

[Ryan Barry]

Re-raising this for discussion.

As I commented on the bug, Hosted Engine is such a special use case in
terms of setup, configuration, and migration that I'm not sure engine
itself is the right place to handle this. We have the option of changing
the ha broker|agent to use the engine API to initiate migrations, but
there's still a risk that the hosts in the secondary cluster will not be
able to reach the storage, etc.

It would be great to get this resolved if there's not currently a way to do
it, but we need to decide on a long-term direction for it. Currently, HE
can run on additional hosts in the datacenter as an emergency fallback, but
it reverts once the HE cluster is back out of maintenance. My ideal would
be to extend the hosted-engine utility with an additional parameter which
reaches out to the Engine API in order to handle the needed database
updates after some safety checks (probably over ansible) to ensure that the
HE storage domain is reachable from hosts in the other cluster.

But I'm not a hosted engine expert. Is there currently a way to do this? If
there isn't, do we want to add additional logic to ha agent|broker, or
reach out to the Engine?

On Tue, Jan 15, 2019 at 8:27 AM Douglas Duckworth 
wrote:

> Hi
>
> I opened a BugZilla at https://bugzilla.redhat.com/show_bug.cgi?id=1664777
> but no steps have been shared on how to resolve.  Does anyone know how this
> can be fixed without destroying the data center and building a new hosted
> engine?
>
> Thanks,
>
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit 
> Weill Cornell Medicine
> 1300 York Avenue
> New York, NY 10065
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690
>
>
> On Wed, Jan 9, 2019 at 10:22 AM Douglas Duckworth 
> wrote:
>
>> Hi
>>
>> Should I open a Bugzilla to resolve this problem?
>>
>> Thanks,
>>
>> Douglas Duckworth, MSc, LFCS
>> HPC System Administrator
>> Scientific Computing Unit 
>> Weill Cornell Medicine
>> 1300 York Avenue
>> New York, NY 10065
>> E: d...@med.cornell.edu
>> O: 212-746-6305
>> F: 212-746-8690
>>
>>
>> On Wed, Dec 19, 2018 at 1:13 PM Douglas Duckworth <
>> dod2...@med.cornell.edu> wrote:
>>
>>> Hello
>>>
>>> I am trying to migrate my hosted-engine VM to another cluster in the
>>> same data center.  Hosts in both clusters have the same logical networks
>>> and storage.  Yet migrating the VM isn't an option.
>>>
>>> To get the hosted-engine VM on the other cluster I started the VM on
>>> host in that other cluster using "hosted-engine --vm-start."
>>>
>>> However HostedEngine still associated with old cluster as shown
>>> attached.  So I cannot live migrate the VM.  Does anyone know how to
>>> resolve?  With other VMs one can shut them down then using the "Edit"
>>> option.  Though that will not work for HostedEngine.
>>>
>>>
>>> Thanks,
>>>
>>> Douglas Duckworth, MSc, LFCS
>>> HPC System Administrator
>>> Scientific Computing Unit 
>>> Weill Cornell Medicine
>>> 1300 York Avenue
>>> New York, NY 10065
>>> E: d...@med.cornell.edu
>>> O: 212-746-6305
>>> F: 212-746-8690
>>>
>> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/J2GZK5PUBZIQLGLNZ2UUCSIES6HSZLHC/
>


-- 

Ryan Barry

Associate Manager - RHV Virt/SLA

rba...@redhat.comM: +16518159306 IM: rbarry

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IRKEWL34BRPBQSMR5HGHT5RI6O2PQA63/

[ovirt-users] oVirt 4.3 RC2 and libgfapi

[Gianluca Cecchi]

Just installed a single host HCI with gluster, with only the engine vm
running.
Is it expected this situation below?

# virsh -r list
 IdName   State

 2 HostedEngine   running

and
# virsh -r dumpxml 2
. . .

  
  

  
  
  
  fc34d770-9318-4539-9233-bfb1c5d68d14
  
  

. . .

where
# ll /var/run/vdsm/storage/e4eb6832-e0f6-40ee-902f-f301e5a3a643/
total 24
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44
39df7b45-4932-4bfe-b69e-4fb2f8872f4f ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/39df7b45-4932-4bfe-b69e-4fb2f8872f4f
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44
5ba6cd9e-b78d-4de4-9b7f-9688365128bf ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/5ba6cd9e-b78d-4de4-9b7f-9688365128bf
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 15:56
8b8e41e0-a875-4204-8ab1-c10214a49f5c ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/8b8e41e0-a875-4204-8ab1-c10214a49f5c
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 15:56
c21a62ba-73d2-4914-940f-cee6a67a1b08 ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/c21a62ba-73d2-4914-940f-cee6a67a1b08
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44
fc34d770-9318-4539-9233-bfb1c5d68d14 ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/fc34d770-9318-4539-9233-bfb1c5d68d14
lrwxrwxrwx. 1 vdsm kvm 133 Jan 16 14:44
fd73354d-699b-478e-893c-e2a0bd1e6cbb ->
/rhev/data-center/mnt/glusterSD/10.10.10.216:
_engine/e4eb6832-e0f6-40ee-902f-f301e5a3a643/images/fd73354d-699b-478e-893c-e2a0bd1e6cbb

so hosted engine not using libgfapi?
Also, on hosted engine

[root@hciengine ~]# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 4.1
LibgfApiSupported: false version: 4.2
LibgfApiSupported: false version: 4.3
[root@hciengine ~]#

So that if I import a CentOS7 Atomic host image from glance repo as
template and create a new vm from it,when running this VM I get

# virsh -r dumpxml 3
. . .

  
  

  
  
  
  e4f92226-0f56-4822-a622-d1ebff41df9f
  
  
  

. . .

I remember there was an "old" bug opened causing this default of not
enabling libgfapi
Does this mean it was not solved yet?
If I remember correctly the bugzilla was this one related to HA:
https://bugzilla.redhat.com/show_bug.cgi?id=1484227
that is still in new status since almost 2 years

Is this the only one open?


Thanks,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KHWQA72JZVGLVXCIQPU2FDFRS73BW4LY/

[ovirt-users] Re: Hosted Engine Storage migration

[joel+ovirt]

Hi folks!

There are even more links than I mentioned above and also others confused by 
the process:
https://lists.ovirt.org/pipermail/users/2017-January/078739.html
https://lists.ovirt.org/pipermail/users/2018-January/086116.html

I'm still looking for an answer here - do I shut down my existing hosted VM and 
follow:
https://bugzilla.redhat.com/show_bug.cgi?id=1409112#c12 ?

will I need to provision this on a new piece of metal that will be added to the 
stack?

Thanks,
Joel
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VZ4BJAKJDQ2CAB3GOWLPZAQP4VNKRXXK/

[ovirt-users] [SOLVED] Re: vGPU with NVIDIA M60 mdev_type not showing

[Josep Manel Andrés Moscardó]

Hi,
I found what was going on, so as Milan stated, the order is:

- Enable  intel_iommu=on
- Reinstall the host
- Install NVIDIA driver

I had the nvidia driver installed before enabling iommu in the kernel

Cheers.


On 16/1/19 14:16, Josep Manel Andrés Moscardó wrote:

Hi Milan,
I have re-deployed the server and now is booting with:

[root@esxh-03 ~]# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-3.10.0-957.1.3.el7.x86_64 
root=/dev/mapper/centos_esxh--03-root ro nofb splash=quiet 
crashkernel=auto rd.lvm.lv=centos_esxh-03/root 
rd.lvm.lv=centos_esxh-03/swap rhgb quiet nouveau.modeset=0 intel_iommu=on



But still not able to see mdev:

[root@esxh-03 ~]# vdsm-client Host hostdevListByCaps | grep -i mdev
[root@esxh-03 ~]#

Do you have any other idea about what could be going on?

Cheers.


On 16/1/19 13:03, Milan Zamazal wrote:

Josep Manel Andrés Moscardó  writes:


Hi all,
I have a host with 2 M60 with the latest supported driver installed,
and working as you can see:


Hi, all looks fine and the same as on my setup, which is working.

How about kernel command line (cat /proc/cmdline)?  It's important to
have intel_iommu=on there (assuming an Intel machine).

[...]


Is it possible that the package vdsm-hook-vfio-mdev is needed? As far
as I understand it is already deprecated, but I cannot find anything
on the documentation.


The hook is no longer needed nor should be installed.

Regards,
Milan
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WRAZPQKQOWGPTO4VDOESNEZ7BZZ24O3R/ 






___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3SPROYVRP6ID6L74USC6Y4ALHM3CO6UF/



--
Josep Manel Andrés Moscardó
Systems Engineer, IT Operations
EMBL Heidelberg
T +49 6221 387-8394



smime.p7s
Description: S/MIME Cryptographic Signature
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NRPTT5K6YDQ6NOE776MUS6XPIKQQFR2R/

[ovirt-users] Re: oVirt 4.3 RC2 test on single host HCI --> OK

[Gianluca Cecchi]

On Wed, Jan 16, 2019 at 4:59 PM Sahina Bose  wrote:

> On Wed, Jan 16, 2019 at 8:24 PM Gianluca Cecchi
>  wrote:
> >
> > Just tested what in subject on a vm (so it has been a nested env)
> configured with 2 disks: 1x60Gb for OS and 1x100Gb for gluster.
> > Used node ng from ovirt-node-ng-installer-4.3.0-2019011608.el7.iso and
> almost all the problems had with RC1 here:
> > https://www.mail-archive.com/users@ovirt.org/msg52870.html
> > have gone solved.
> > The hosted engine deploy completed successfully and I'm able to access
> engine web admin and see the VM and its storage domain and connect to
> console.
> >
> > The only persisting problem is that I choose JBOD in my disk config
> (because I have only one disk) and the deploy gives error about missing
> diskcount parameter in ansible playbook, so I have to edit the gdeploy conf
> file from the gui and add the section
> >
> > [diskcount]
> > 1
> >
> > after that all goes well.
> > Good job guys!
> >
> > BTW: is it correct hat for data and vmstore I only have the volumes
> configured, while I have to manullay create storage domains?
>
> I think the addition of storage domain may be missing? Gobinda?
>
> >
> > If I want to extend this initial configuration to 3 nodes, what would be
> the installation path to execute?
>
> You can add the additional hosts via engine, and expand the volume.
> The bricks are laid out differently - as there's no option to create
> multiple bricks on engine UI. We did have an expand volume planned in
> the gluster management dashboard in Cockpit, I don't recollect if it
> made it to 4.3.
>
>
My only need at this time is to install the same iso on 2 additional hosts
configured with the same hw: 1x60Gb disk for os and 1x100Gb for Gluster,
and add them to the infra so that I will have the same volumes with the
same size, but distributed on the three nodes, without interruption of
service from current config.
One of the two additional nodes will work as arbiter

Thanks,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2VHJ62WBVTDCPSAM3SM3SQ6CMGVQ62B2/

[ovirt-users] Re: oVirt 4.3 RC2 test on single host HCI --> OK

[Sahina Bose]

On Wed, Jan 16, 2019 at 8:24 PM Gianluca Cecchi
 wrote:
>
> Just tested what in subject on a vm (so it has been a nested env) configured 
> with 2 disks: 1x60Gb for OS and 1x100Gb for gluster.
> Used node ng from ovirt-node-ng-installer-4.3.0-2019011608.el7.iso and almost 
> all the problems had with RC1 here:
> https://www.mail-archive.com/users@ovirt.org/msg52870.html
> have gone solved.
> The hosted engine deploy completed successfully and I'm able to access engine 
> web admin and see the VM and its storage domain and connect to console.
>
> The only persisting problem is that I choose JBOD in my disk config (because 
> I have only one disk) and the deploy gives error about missing diskcount 
> parameter in ansible playbook, so I have to edit the gdeploy conf file from 
> the gui and add the section
>
> [diskcount]
> 1
>
> after that all goes well.
> Good job guys!
>
> BTW: is it correct hat for data and vmstore I only have the volumes 
> configured, while I have to manullay create storage domains?

I think the addition of storage domain may be missing? Gobinda?

>
> If I want to extend this initial configuration to 3 nodes, what would be the 
> installation path to execute?

You can add the additional hosts via engine, and expand the volume.
The bricks are laid out differently - as there's no option to create
multiple bricks on engine UI. We did have an expand volume planned in
the gluster management dashboard in Cockpit, I don't recollect if it
made it to 4.3.

>
> Thanks,
> Gianluca
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/WNMH2OIZOM3JUQ3L22FGYTNNUW73FMFB/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ISR3HFOEG644C6CVGSXS56EV36UV4VJF/

[ovirt-users] oVirt 4.3 RC2 test on single host HCI --> OK

[Gianluca Cecchi]

Just tested what in subject on a vm (so it has been a nested env)
configured with 2 disks: 1x60Gb for OS and 1x100Gb for gluster.
Used node ng from ovirt-node-ng-installer-4.3.0-2019011608.el7.iso and
almost all the problems had with RC1 here:
https://www.mail-archive.com/users@ovirt.org/msg52870.html
have gone solved.
The hosted engine deploy completed successfully and I'm able to access
engine web admin and see the VM and its storage domain and connect to
console.

The only persisting problem is that I choose JBOD in my disk config
(because I have only one disk) and the deploy gives error about missing
diskcount parameter in ansible playbook, so I have to edit the gdeploy conf
file from the gui and add the section

[diskcount]
1

after that all goes well.
Good job guys!

BTW: is it correct hat for data and vmstore I only have the volumes
configured, while I have to manullay create storage domains?

If I want to extend this initial configuration to 3 nodes, what would be
the installation path to execute?

Thanks,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WNMH2OIZOM3JUQ3L22FGYTNNUW73FMFB/

[ovirt-users] Re: Supporting comments on ovirt-site Blog section

[Laura Wright]

Hi Roy,

I'm currently working on some redesign efforts around the website and can
take that into account a comment section as a feature to include in the
blog since I agree that it is a pretty standard feature to have on a
community blog.

Best,
Laura

On Wed, Jan 16, 2019 at 2:57 AM Roy Golan  wrote:

> It would be very useful to have a comment section on our ovirt site.
> It is quite standard to have that on every blog out there, and for a
> reason - you get
> feedback and conversation around the topic, without going somewhere else
> (users list, irc, etc...)
>
> What do we need to do to help the middle man with that?
>
> Regards,
>   Roy
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/AE2VNIVCG26X7WLVLUPKMQEWJTKO7NVK/
>


-- 

LAURA WRIGHT

ASSOCIATE INTERACTION DESIGNER, UXD TEAM

Red Hat Massachusetts 

314 Littleton Rd

lwri...@redhat.com

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WWYC4FOERSBRIFG6NOHKWS5S24PCC3A6/

[ovirt-users] Re: vGPU with NVIDIA M60 mdev_type not showing

[Josep Manel Andrés Moscardó]

Hi Milan,
I have re-deployed the server and now is booting with:

[root@esxh-03 ~]# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-3.10.0-957.1.3.el7.x86_64 
root=/dev/mapper/centos_esxh--03-root ro nofb splash=quiet 
crashkernel=auto rd.lvm.lv=centos_esxh-03/root 
rd.lvm.lv=centos_esxh-03/swap rhgb quiet nouveau.modeset=0 intel_iommu=on



But still not able to see mdev:

[root@esxh-03 ~]# vdsm-client Host hostdevListByCaps | grep -i mdev
[root@esxh-03 ~]#

Do you have any other idea about what could be going on?

Cheers.


On 16/1/19 13:03, Milan Zamazal wrote:

Josep Manel Andrés Moscardó  writes:


Hi all,
I have a host with 2 M60 with the latest supported driver installed,
and working as you can see:


Hi, all looks fine and the same as on my setup, which is working.

How about kernel command line (cat /proc/cmdline)?  It's important to
have intel_iommu=on there (assuming an Intel machine).

[...]


Is it possible that the package vdsm-hook-vfio-mdev is needed? As far
as I understand it is already deprecated, but I cannot find anything
on the documentation.


The hook is no longer needed nor should be installed.

Regards,
Milan
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WRAZPQKQOWGPTO4VDOESNEZ7BZZ24O3R/



--
Josep Manel Andrés Moscardó
Systems Engineer, IT Operations
EMBL Heidelberg
T +49 6221 387-8394



smime.p7s
Description: S/MIME Cryptographic Signature
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3SPROYVRP6ID6L74USC6Y4ALHM3CO6UF/

[ovirt-users] Re: vGPU with NVIDIA M60 mdev_type not showing

[Milan Zamazal]

Josep Manel Andrés Moscardó  writes:

> Hi all,
> I have a host with 2 M60 with the latest supported driver installed,
> and working as you can see:

Hi, all looks fine and the same as on my setup, which is working.

How about kernel command line (cat /proc/cmdline)?  It's important to
have intel_iommu=on there (assuming an Intel machine).

[...]

> Is it possible that the package vdsm-hook-vfio-mdev is needed? As far
> as I understand it is already deprecated, but I cannot find anything
> on the documentation.

The hook is no longer needed nor should be installed.

Regards,
Milan
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WRAZPQKQOWGPTO4VDOESNEZ7BZZ24O3R/

[ovirt-users] [ANN] oVirt 4.3.0 Second Release Candidate is now available for testing

[Sandro Bonazzola]

The oVirt Project is pleased to announce the availability of the Second
Release Candidate of oVirt 4.3.0, as of January 16th, 2018

This is pre-release software. This pre-release should not to be used in
production.

Please take a look at our community page[1] to learn how to ask questions
and interact with developers and users.

All issues or bugs should be reported via oVirt Bugzilla[2].

This update is the first release candidate of the 4.3.0 version.

This release brings more than 130 enhancements and more than 440 bug fixes
on top of oVirt 4.2 series.

What's new in oVirt 4.3.0?

* Q35 chipset, support booting using UEFI and Secure Boot

* Skylake-server and AMD EPYC support

* New smbus driver in windows guest tools

* Improved support for v2v

* OVA export / import of Templates

* Full support for live migration of High Performance VMs

* Microsoft Failover clustering support (SCSI Persistent Reservation) for
Direct LUN disks

* Hundreds of bug fixes on top of oVirt 4.2 series

* New VM portal details page (see a preview here:
https://imgur.com/a/ExINpci)

* New Cluster upgrade UI

* OVN security groups

* IPv6 (static host addresses)

* Support of Neutron from RDO OpenStack 13 as external network provider

* Support of using Skydive from RDO OpenStack 14 as Tech Preview

* Support for 3.6 and 4.0 data centers, clusters and hosts were removed

* Now using PostgreSQL 10

* New metrics support using rsyslog instead of fluentd


This release is available now on x86_64 architecture for:

* Red Hat Enterprise Linux 7.6 or later

* CentOS Linux (or similar) 7.6 or later


This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:

* Red Hat Enterprise Linux 7.6 or later

* CentOS Linux (or similar) 7.6 or later

* oVirt Node 4.3 (available for x86_64 only)

Experimental tech preview for x86_64 and s390x architectures for Fedora 28
is also included.

See the release notes draft [3] for installation / upgrade instructions and
a list of new features and bugs fixed.

Notes:

- oVirt Appliance is already available for both CentOS 7 and Fedora 28
(tech preview).

- oVirt Node NG  is already available for both CentOS 7 and Fedora 28 (tech
preview).

Additional Resources:

* Read more about the oVirt 4.3.0 release highlights:
http://www.ovirt.org/release/4.3.0/

* Get more oVirt project updates on Twitter: https://twitter.com/ovirt

* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/


[1] https://www.ovirt.org/community/

[2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt

[3] http://www.ovirt.org/release/4.3.0/

[4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/


-- 

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/J3TFWQQRBE4RYS2DU222OKHFIJHWHSBZ/

[ovirt-users] Re: Problems uploading ISO

[Lucie Leistnerova]

On 1/16/19 9:38 AM, Sandro Bonazzola wrote:



Il giorno mer 16 gen 2019 alle ore 09:11 Lucie Leistnerova 
mailto:lleis...@redhat.com>> ha scritto:


Hello,

On 1/16/19 7:45 AM, je...@tom.com  wrote:

I using ovirt-iso-uploadercommand to upload iso. but failed andgiving me 
the following error.
[root@ha ~]# engine-iso-uploader --verbose -i iso upload delta1.iso
Please provide the REST API password for the admin@internal oVirt Engine 
user (CTRL+D to abort):
DEBUG: API Vendor(None) API Version(4.2.0)
DEBUG: id=029786a6-4686-44a1-a667-b948df945712 address=storage1 path=/iso
Uploading, please wait...
INFO: Start uploading delta1.iso
ERROR: glfs_init failed: Success
[root@ha ~]# ^C
I've been looking for a possible solution but nothing works yet. Any
guidance on this matter will be appreciate it.


Remove package python2-ovirt-iso-uploader and then install
ovirt-iso-uploader.

$ rpm -e --nodeps python2-ovirt-iso-uploader


Is this ISO uploader 4.3 talking to 4.2 engine?


Yes, I'm able to upload iso also to 4.2 engine.





m19...@tom.com 

___
Users mailing list --users@ovirt.org  
To unsubscribe send an email tousers-le...@ovirt.org  

Privacy Statement:https://www.ovirt.org/site/privacy-policy/
oVirt Code of 
Conduct:https://www.ovirt.org/community/about/community-guidelines/
List 
Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAZ3BCYOMMDTPG7SPZ53KWOYZV2KYBKE/


Best regards

-- 


Lucie Leistnerova
Quality Engineer, QE Cloud, RHVM
Red Hat EMEA

IRC: lleistne @ #rhev-qe

___
Users mailing list -- users@ovirt.org 
To unsubscribe send an email to users-le...@ovirt.org

Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGHB5A44UTSNNHAZVNLPQCZVBBC57CHP/



--

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com 




--
Lucie Leistnerova
Quality Engineer, QE Cloud, RHVM
Red Hat EMEA

IRC: lleistne @ #rhev-qe

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6QPCYCUKDTIJ4R6KP2RD6CTDIMVVNW76/

[ovirt-users] Re: Problems uploading ISO

[Sandro Bonazzola]

Il giorno mer 16 gen 2019 alle ore 09:11 Lucie Leistnerova <
lleis...@redhat.com> ha scritto:

> Hello,
> On 1/16/19 7:45 AM, je...@tom.com wrote:
>
> I using ovirt-iso-uploader command to upload iso. but failed and giving me 
> the following error.
>
> [root@ha ~]# engine-iso-uploader --verbose -i iso upload delta1.iso
> Please provide the REST API password for the admin@internal oVirt Engine user 
> (CTRL+D to abort):
> DEBUG: API Vendor(None)   API Version(4.2.0)
> DEBUG: id=029786a6-4686-44a1-a667-b948df945712 address=storage1 path=/iso
> Uploading, please wait...
> INFO: Start uploading delta1.iso
> ERROR: glfs_init failed: Success
> [root@ha ~]# ^C
> I've been looking for a possible solution but nothing works yet. Any
> guidance on this matter will be appreciate it.
>
>
> Remove package python2-ovirt-iso-uploader and then install
> ovirt-iso-uploader.
>
> $ rpm -e --nodeps python2-ovirt-iso-uploader
>

Is this ISO uploader 4.3 talking to 4.2 engine?



>
> --
> m19...@tom.com
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAZ3BCYOMMDTPG7SPZ53KWOYZV2KYBKE/
>
> Best regards
>
> --
>
> Lucie Leistnerova
> Quality Engineer, QE Cloud, RHVM
> Red Hat EMEA
>
> IRC: lleistne @ #rhev-qe
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGHB5A44UTSNNHAZVNLPQCZVBBC57CHP/
>


-- 

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/A52OYZI4LIF246PWVBEVL5SUDUP4F5HK/

[ovirt-users] Re: Problems uploading ISO

[Sandro Bonazzola]

Il giorno mer 16 gen 2019 alle ore 09:00 je...@tom.com  ha
scritto:

> I using ovirt-iso-uploader command to upload iso. but failed and giving me 
> the following error.
>
> [root@ha ~]# engine-iso-uploader --verbose -i iso upload delta1.iso
> Please provide the REST API password for the admin@internal oVirt Engine user 
> (CTRL+D to abort):
> DEBUG: API Vendor(None)   API Version(4.2.0)
> DEBUG: id=029786a6-4686-44a1-a667-b948df945712 address=storage1 path=/iso
> Uploading, please wait...
> INFO: Start uploading delta1.iso
> ERROR: glfs_init failed: Success
> [root@ha ~]# ^C
> I've been looking for a possible solution but nothing works yet. Any
> guidance on this matter will be appreciate it.
>
>
>
Sahina, Denis, Gal, can you help here?



> --
> m19...@tom.com
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAZ3BCYOMMDTPG7SPZ53KWOYZV2KYBKE/
>


-- 

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IYYDSEL4D5UAUKJRRS2C2ZETYWCN45C7/

[ovirt-users] Re: Problems uploading ISO

[Lucie Leistnerova]

Hello,

On 1/16/19 7:45 AM, je...@tom.com wrote:

I using ovirt-iso-uploadercommand to upload iso. but failed andgiving me the 
following error.
[root@ha ~]# engine-iso-uploader --verbose -i iso upload delta1.iso
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort):
DEBUG: API Vendor(None) API Version(4.2.0)
DEBUG: id=029786a6-4686-44a1-a667-b948df945712 address=storage1 path=/iso
Uploading, please wait...
INFO: Start uploading delta1.iso
ERROR: glfs_init failed: Success
[root@ha ~]# ^C
I've been looking for a possible solution but nothing works yet. Any
guidance on this matter will be appreciate it.

Remove package python2-ovirt-iso-uploader and then install 
ovirt-iso-uploader.


$ rpm -e --nodeps python2-ovirt-iso-uploader



m19...@tom.com

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAZ3BCYOMMDTPG7SPZ53KWOYZV2KYBKE/


Best regards

--

Lucie Leistnerova
Quality Engineer, QE Cloud, RHVM
Red Hat EMEA

IRC: lleistne @ #rhev-qe

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGHB5A44UTSNNHAZVNLPQCZVBBC57CHP/

[ovirt-users] Problems uploading ISO

[je...@tom.com]

I using ovirt-iso-uploader command to upload iso. but failed and giving me the 
following error.[root@ha ~]# engine-iso-uploader --verbose -i iso upload 
delta1.iso 
Please provide the REST API password for the admin@internal oVirt Engine user 
(CTRL+D to abort): 
DEBUG: API Vendor(None) API Version(4.2.0)
DEBUG: id=029786a6-4686-44a1-a667-b948df945712 address=storage1 path=/iso
Uploading, please wait...
INFO: Start uploading delta1.iso 
ERROR: glfs_init failed: Success
[root@ha ~]# ^C
I've been looking for a possible solution but nothing works yet. Any
guidance on this matter will be appreciate it.



m19...@tom.com
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UAZ3BCYOMMDTPG7SPZ53KWOYZV2KYBKE/