I have a brand spanking new installation. Fresh controllers and nodes.
I have imported some machines and have them up and running. However,
when I try to add any more networks to the nodes, I get a failure. The
engine.log is giving the following failure:
2013-12-13 19:48:03,280 INFO
[org.o
On Fri, Dec 13, 2013 at 5:57 PM, Alon Bar-Lev wrote:
>>
>>
>> Under /etc/pki/ovirt-engine/keys I only have these files:
>> [root@tekkaman keys]# ll
>> total 16
>> -rw-r-. 1 apache apache 1828 Feb 10 2013 apache.key.nopass
>> -rw-r-. 1 apache apache 2677 Feb 10 2013 apache.p12
>> -rw-
Hey Simon,
It actually doesn't surprise me that it's related to the template,
because we had other issues that were template-related in this dialog.
However, I haven't been able to reproduce it myself when working from
the master branch. So either it got fixed between 3.3.1 and now, or I
just didn
Hi Jorick,
On Thu, Dec 12, 2013 at 6:10 PM, Jorick Astrego wrote:
> Not trying to start a flame war or something on this list, just curious
> about the reasoning
> Why only Google+? We would love to test it but I refuse to get a Google
> account due to privacy and other civil liberty issues.
On 12/13/2013 03:11 PM, Ted Miller wrote:
On 12/13/2013 7:56 AM, Bob Doolittle wrote:
On 12/12/2013 11:04 PM, Ted Miller wrote:
From: users-boun...@ovirt.org on behalf of
Ted Miller
Sent: Wednesday, November 27, 2013 12:18 PM
To: users@ovirt.org
S
On 12/13/2013 7:56 AM, Bob Doolittle wrote:
On 12/12/2013 11:04 PM, Ted Miller wrote:
From: users-boun...@ovirt.org on behalf of Ted
Miller
Sent: Wednesday, November 27, 2013 12:18 PM
To: users@ovirt.org
Subject: [Users] simple networking?
I am try
*> Hi,
> I had a nfs storage problems and one of my VM's is now in unknown
> state. The VM is not attached to any host. The virsh tool shows that
> VM is not running now. Is there any way to bring that kind of VM back
> to life?
>
> Best regards,
> Piotr
>
Hi,
I found workaround for this situation
Just wanted to share my view.
Have been working with vmware vsphere for a number of years and when
dealing with a few hundreds of vm's, setting a boot delay on each is not a
good way to handle this issue IMHO. Besides, this setting affects all
sysadminsand might not be what everyone wishes. I thin
Two hammer strikes and two nails firmly driven. You were absolutely
correct on both counts. I have green nodes!!! Thanks a bazillion!!
On 12/13/2013 02:04 PM, Alon Bar-Lev wrote:
- Original Message -
From: "Rob Abshear"
To: "Markus Stockhausen" , users@ovirt.org
Sent: Friday, Dece
On 12/11/2013 02:28 PM, Sven Kieske wrote:
Hi,
just wanted to add that this is not completely true:
an ISO domain can be attached simultaneously to different
DCs afaik.
But you are right for export domains.
also, while the Glance domain doesn't cover the full functionality of an
export domain
Hi,
With VMware ESX, when you edit the CD device you have of course the
option of attaching an ISO, but IIRC you also have the option of
selecting the physical CDROM device for the Host.
There seems no way to do this with oVirt. It would be a really nice
addition to the "Change CD" menu to h
- Original Message -
> From: "Rob Abshear"
> To: "Markus Stockhausen" , users@ovirt.org
> Sent: Friday, December 13, 2013 9:00:47 PM
> Subject: Re: [Users] How do I add a node?
>
> af:24:d6:b7:d6:2b:90:94:3a:eb:09:e2:36:97:2d:b1.
> 2013-12-13 13:57:51,370 INFO [org.ovirt.engine.core.
I did the additional steps as you recommended. The network is up and I
can manually ssh from the controller to the nodes now. However, the
installation of the node still fails with "Unexpected connection
termination". The engine.log shows the following:
2013-12-13 13:57:51,177 WARN
[org.ovi
> 1. Install Fedora (minimum install) on each machine
> 2. Install tar on each node machine
> 3. Install the engine on the controller machine.
> 4. Add nodes using IP and password in the web admin interface and let the
> controller build the node.
> 5. Profit.
:)
I guess you missed some man
On 12/13/2013 12:30 PM, Rob Abshear wrote:
I am thoroughly confused at this point. I have three servers. One for
a controller and two for nodes. These servers were used as an oVirt
environment just last week. But, now, when I try to do a fresh
installation with the exact same configuration
I am thoroughly confused at this point. I have three servers. One for
a controller and two for nodes. These servers were used as an oVirt
environment just last week. But, now, when I try to do a fresh
installation with the exact same configuration as before, I can't add
nodes. Here is the
- Original Message -
> From: "Gianluca Cecchi"
> To: "Alon Bar-Lev"
> Cc: "Frantisek Kobzik" , "users"
> Sent: Friday, December 13, 2013 6:40:12 PM
> Subject: Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
>
> On Fri, Dec 13, 2013 at 3:52 PM, Alon Bar-Lev wrote:
>
> >
On Fri, Dec 13, 2013 at 3:52 PM, Alon Bar-Lev wrote:
> Do the following:
>
> 1. rm /etc/pki/ovirt-engine/keys/websocket-proxy.p12
>
> 2. run setup using:
>
> # engine-setup
> --otopi-environment="OVESETUP_CONFIG/websocketProxyConfig=bool:True"
>
> Now you should have the websocket configured corr
Hi,
I'm trying to debug why I can't import a VM to my brand new glusterfs
domain and I see that engine.log is full of gluster volumelist calls and
less but often, errors of not been able to call async, I'm I missing any
package to install in the engine other than vdsm-gluster?
Is there a way not t
- Original Message -
> From: "Gianluca Cecchi"
> To: "Alon Bar-Lev"
> Cc: "Frantisek Kobzik" , "users"
> Sent: Friday, December 13, 2013 4:45:46 PM
> Subject: Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
>
> On Fri, Dec 13, 2013 at 3:43 PM, Alon Bar-Lev wrote:
> > Ho
On Fri, Dec 13, 2013 at 3:43 PM, Alon Bar-Lev wrote:
> How have you installed your setup?
> Can you please start from scratch?
> It should just work out of the box with no additional configuration.
setup was 3.3.0 then updated to 3.3.1 and then 3.3.2 beta
websocket proxy was configured only after
> websocket-proxy python script I get this
In the sense that
I get this inside the terminal if I try to connect to
https://tekkaman.localdomain.local:6100
and in browser I get web page not available in chrome and connection
was resest in firefox
Instead going with
http://tekkaman.localdomain.lo
How have you installed your setup?
Can you please start from scratch?
It should just work out of the box with no additional configuration.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On Fri, Dec 13, 2013 at 11:24 AM, Alon Bar-Lev wrote:
>
> I am unsure spice-html5 supports spice proxy[1], and it is not required as
> websocket protocol is http already.
>
> Gianluca, the engine-setup of 3.3.1 will setup the spice proxy per default on
> the engine, it should be sufficient to w
Well,
you seem to have extreme problems in setting this up, so
I write some basic setup which should just work with all vms
and all "hosts" on the same network:
have 2 physical servers, both in the same network (maybe via dhcp or
static, doesn't matter).
Setup on both hosts EL6.4 (6.5 should work
On Fri, Dec 13, 2013 at 1:42 PM, Michal Skrivanek
wrote:
> Too bad QEMU doesn't support it. So it's still a long way.
qemu/libvirt "kind of" supports it (at least in F19).
In virt-manager you can define "current" and "maximum" memory allocation.
The VM only sees the current allocation and you c
On 12/12/2013 11:04 PM, Ted Miller wrote:
From: users-boun...@ovirt.org on behalf of Ted Miller
Sent: Wednesday, November 27, 2013 12:18 PM
To: users@ovirt.org
Subject: [Users] simple networking?
I am trying to set up a testing network using o-virt, b
Too bad QEMU doesn't support it. So it's still a long way.
Balloon should be able to cover most of the use cases. You have overcommit and
can reserve only a part of RAM, then change the reserved amount which adds more
RAM resources.
OS still sees the same (maximum) size, but effectively it allow
- Original Message -
> From: "Sven Kieske"
> To: users@ovirt.org
> Sent: Friday, December 13, 2013 12:42:48 PM
> Subject: Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
>
> Hi,
>
> short question regarding this behaviour:
> What would be the recommended way to revert th
Entropy starvation isn't that common so for the vast majority of users it's not
something that concerns them.
But obviously it's important enough that we invested in creating a
paravirtualized solution.
RHEL 6.4 and 6.5 includes support within QEMU for virt-rng but not in libvirt.
RHEL 6.6 will
Hi Sander,
I'll do the changes to the firewall as you mention. I'm running the
domain in a host as my engine is in a vm with low disk resources. I
don't know if there's a way to set up the domain automatically with
ovirt when it's deployed in a host.
Regards,
On 13/12/13 06:00, Sander Grendelman
Hi,
short question regarding this behaviour:
What would be the recommended way to revert the spice proxy setup from
the engine host?
And how do you tell engine/ovirt later to use another machine as the
proxy? (is this different for the webproxy?)
Am 13.12.2013 11:24, schrieb Alon Bar-Lev:
> Gianl
- Original Message -
> From: "Frantisek Kobzik"
> To: "Gianluca Cecchi"
> Cc: "users"
> Sent: Friday, December 13, 2013 12:08:58 PM
> Subject: Re: [Users] SpiceHTML5, noVNC console and Spice Proxy mixable?
>
> Hi,
>
> the answer to the 1st question is 'yes'. You can use both SPICE-HT
Hi,
the answer to the 1st question is 'yes'. You can use both SPICE-HTML5 and noVNC
with a single proxy setup.
Coming to next questions:
- is it mixable with the two above or are they mutually exclusive?
- IMHO it should work. the data flow would look like this:
client <--> websocket proxy <
Answering myself, it seems
virtio-rng will be in 3.4:
https://bugzilla.redhat.com/show_bug.cgi?id=977079
But I don't find it in the planning:
https://docs.google.com/spreadsheet/ccc?key=0AuAtmJW_VMCRdHJ6N1M3d1F1UTJTS1dSMnZwMF9XWVE&usp=sharing#gid=0
Nevertheless it would be cool if someone could
+1 for that one (although I got a google account for 3.4 planning, I
don't like it)
Am 13.12.2013 00:10, schrieb Jorick Astrego:
> Hi,
>
> Not trying to start a flame war or something on this list, just curious
> about the reasoning
> Why only Google+? We would love to test it but I refuse to
After you add the epel repo you should be able to add the host via the engine
webadmin interface.
You can use the rest api to automate this call.
- Original Message -
> From: "Ted Miller"
> To: users@ovirt.org
> Sent: Friday, December 13, 2013 6:48:16 AM
> Subject: [Users] Centos 6.5 hos
Hi,
I'm just wondering: How is the state
of the virtio-rng implementation?
I'm asking because I need to regenerate
ssh host keys in newly deployed vms.
(I seem to be the only person, or everybody
else has found the solution, or nobody thinks
about security, or a mixture of the above?)
Additiona
Hi,
both wiki page http://www.ovirt.org/User_Guides and
git://gerrit.ovirt.org/ovirt-docs are a bit outdated.
We also have a few bugs for components:
- doc-Installation-Guide
- doc-REST_API_Guide
Anybody willing to update docs for 3.3.2 release?
--
Sandro Bonazzola
Better technology. Faster in
Hi,
first, thanks for this script!
I'll have to setup some CentOS 6.5 machines too, maybe it will help.
Here are some questions/improvements from me:
There's no need to use "localinstall" anymore, "install" is fine with
yum :-)
Then you install "virt-manager", for what purpose, may I ask?
I also
On Thu, Dec 12, 2013 at 5:01 PM, Juan Pablo Lorier wrote:
...
> # nfs
> -A INPUT -p tcp -m tcp --dport 111 -j ACCEPT
> -A INPUT -p tcp -m tcp --dport 38467 -j ACCEPT
> -A INPUT -p tcp -m tcp --dport 2049 -j ACCEPT
> -A INPUT -p udp -m udp --dport 2049 -j ACCEPT
> -A INPUT -p udp -m udp --dport
41 matches
Mail list logo
