[ovirt-users] Couple issues found with oVirt 3.6.0 Third Beta Release
Hi, I recently re-installed my test oVirt environment, upgrading from 3.5.2 to 3.6.0 beta 3 (Engine 3.6.0-0.0.master.20150819134454.gite6b79a7.el7.centos, VDSM 4.17.3-0.el7.centos, GlusterFS 3.7.3-1.el7) in the process. Due to a software issue outside of oVirt I had to start with a clean install for 3.6, however I kept all the old storage domains. All hosts and the engine are running CentOS 7.1 and I'm using hosted-engine. During the setup/recovery process I encountered the following issues: :: Could not create GlusterFS Data domain due to 'General Exception' I attempted to create a Data domain using a FQDN associated with a floating IP, so that hosts could still mount the domain when the specific GlusterFS host used to define the storage was down. This FQDN was resolvable and contactable on each host in the farm. The floating IP is shared between two of the four GlusterFS hosts. The logs reported an unhandled exception ('x not in list') raised by the below statement (line 340 in https://github.com/oVirt/vdsm/blob/master/vdsm/storage/storageServer.py ): def _get_backup_servers_option(self): servers = [brick.split(":")[0] for brick in self.volinfo['bricks']] servers.remove(self._volfileserver) #<--- Exception thrown here if not servers: return "" return "backup-volfile-servers=" + ":".join(servers) My assumption (without looking too deep in the code) was that since I used a FQDN that did not have any bricks associated with it, 'self._volfileserver' would be set to a name that would not appear in 'servers', resulting in the exception. I patched it as per the following: def _get_backup_servers_option(self): servers = [brick.split(":")[0] for brick in self.volinfo['bricks']] if self._volfileserver in servers: self.log.warn("Removing current volfileserver %s..." % self._volfileserver) servers.remove(self._volfileserver) else: self.log.warn("Current volfileserver not in servers.") if not servers: return "" return "backup-volfile-servers=" + ":".join(servers) Once patched the Data domain created successfully and appears to be working normally, although I'm not sure if the above change has any negative knock-on effects throughout the code or in specific situations. I'd suggest that the _get_backup_servers_option method be tweaked to handle this configuration gracefully by someone with more knowledge of the code, either by allowing the configuration or rejecting it with a suitable error message if the configuration is intended to be unsupported. :: Could not import VMs from old Data domain due to unsupported video type (VGA) Once the new data center was up and running, I attached the old Data domain and attempted to import the VMs/templates. Template import worked fine, however VM import failed with an error stating the video device (which came up as VGA) was not supported. I attempted to fix this by specifically defining the video type as 'qxl' in the .ovf file for the VM in the OVF_STORE for the old storage however the VM would always come up with video type VGA in the import dialog, and the import dialog does not permit the value to be changed. The workaround was to add 'vnc/vga' to the supported protocols list in a .properties file in the engine OSinfo folder, e.g.: os.other.devices.display.protocols.value = spice/qxl,vnc/cirrus,vnc/qxl,vnc/vga Once the engine was restarted the VM import process worked fine, and there have been no issues starting the VM with a VGA device or accessing the VM's console. To resolve the issue I'd suggest that either: - 'vnc/vga' be added to the default supported protocols list; or - the video type defined in the .ovf file for the VM to be imported is recognized/honoured by the import dialog; or - if the import dialog defaults to a particular video device, that it default to one that is supported by the engine for the OS defined in the VM's .ovf file. I can create Bugzilla entries for the above if required. Cheers, Chris PLEASE CONSIDER THE ENVIRONMENT, DON'T PRINT THIS EMAIL UNLESS YOU REALLY NEED TO. This email and its attachments may contain information which is confidential and/or legally privileged. If you are not the intended recipient of this e-mail please notify the sender immediately by e-mail and delete this e-mail and its attachments from your computer and IT systems. You must not copy, re-transmit, use or disclose (other than to the sender) the existence or contents of this email or its attachments or permit anyone else to do so. - -Original Message- Date: Thu, 20 Aug 2015 16:06:29 +0200 From: Sandro Bonazzola To: annou...@ovirt.org, de...@ovirt.org, users Subject: [ovirt-users] [ANN] oVirt 3.6.0 Third Beta Release is now available for testing Message-ID: Content-Type: text/plain; charset="utf-8" The oVirt Projec
Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3
Hi Vondra, Yes...I am using 10 server cluster farm with Ovirt 3.5.3 with all Centos 7.1 (Engine,Host) from last 6 months...and didn't face any critical issues in the setup... Thanks, Punit On Thu, Aug 27, 2015 at 11:35 PM, VONDRA Alain wrote: > Hi, > Thanks for your answer, but do you mean that oVirt 3.5.3 is fully > supported by CentOS 7.1, because my environment is in this oVirt version ? > Thanks > Alain > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information > Direction Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -Message d'origine- > De : Martin Perina [mailto:mper...@redhat.com] > Envoyé : jeudi 27 août 2015 12:12 > À : VONDRA Alain > Cc : users@ovirt.org > Objet : Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 > > Hi, > > yes Centos 7.1 is fully supported OS in oVirt 3.6. I don't have any > production setup, but many developers uses Centos 7.1 and AFAIK there are > no big issues that prevents you from using Centos 7.1 on engine and hosts. > > Martin Perina > > - Original Message - > > From: "VONDRA Alain" > > To: users@ovirt.org > > Sent: Thursday, August 27, 2015 11:57:19 AM > > Subject: Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 > > > > Hi, > > Is there anybody having experiences about this operation ? > > Thanks > > > > > > > > > > > > Alain VONDRA > > Chargé d'exploitation des Systèmes d'Information Direction > > Administrative et Financière > > +33 1 44 39 77 76 > > UNICEF France > > 3 rue Duguay Trouin 75006 PARIS > > www.unicef.fr > > > > > > > > > > -Message d'origine- > > De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la > > part de VONDRA Alain Envoyé : mercredi 26 août 2015 15:17 À : > > users@ovirt.org Objet : [ovirt-users] CentOS 7.1 compatibility with > > oVirt 3.5.3 > > > > Hello, > > Before operating a migration of my oVirt engine, I'd like to know if I > > can install my manager directly as host with CentOS 7.1 and oVirt > > 3.5.3 without using hosted engine. > > I know that with older version we needed to use only hosted engine > > installation. > > Thanks for your advices. > > Alain > > > > > > > > Alain VONDRA > > Chargé d'exploitation des Systèmes d'Information Direction > > Administrative et Financière > > +33 1 44 39 77 76 > > UNICEF France > > 3 rue Duguay Trouin 75006 PARIS > > www.unicef.fr > > > > > > > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Testing ovirt 3.6 beta 3: Gluster hyperconvergence
Hi, Is gluster hyperconvergence still part of ovirt 3.6? I wanted to test the concept, but the deploy script doesn't give me the option to create a local brick for the VM engine after selecting glusterfs as storage. PS: vdsm-gluster and glusterfs-server are installed, vdsmd service was restarted Regards. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3
Hi, Thanks for your answer, but do you mean that oVirt 3.5.3 is fully supported by CentOS 7.1, because my environment is in this oVirt version ? Thanks Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -Message d'origine- De : Martin Perina [mailto:mper...@redhat.com] Envoyé : jeudi 27 août 2015 12:12 À : VONDRA Alain Cc : users@ovirt.org Objet : Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 Hi, yes Centos 7.1 is fully supported OS in oVirt 3.6. I don't have any production setup, but many developers uses Centos 7.1 and AFAIK there are no big issues that prevents you from using Centos 7.1 on engine and hosts. Martin Perina - Original Message - > From: "VONDRA Alain" > To: users@ovirt.org > Sent: Thursday, August 27, 2015 11:57:19 AM > Subject: Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 > > Hi, > Is there anybody having experiences about this operation ? > Thanks > > > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information Direction > Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -Message d'origine- > De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la > part de VONDRA Alain Envoyé : mercredi 26 août 2015 15:17 À : > users@ovirt.org Objet : [ovirt-users] CentOS 7.1 compatibility with > oVirt 3.5.3 > > Hello, > Before operating a migration of my oVirt engine, I'd like to know if I > can install my manager directly as host with CentOS 7.1 and oVirt > 3.5.3 without using hosted engine. > I know that with older version we needed to use only hosted engine > installation. > Thanks for your advices. > Alain > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information Direction > Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Delete snapshot with status illegal - live merge not possible
Hello, after a failed live storage migration (cause unknown) we have a snapshot which is undeletable due to its status 'illegal' (as seen in storage/snapshot tab). I have already found some bugs [1],[2],[3] regarding this issue, but no way how to solve the issue within oVirt > 3.5.3. I have attached the relevant engine.log snippet. Is there any way to do a live merge (and therefore delete the snapshot)? [1] https://bugzilla.redhat.com/show_bug.cgi?id=1213157 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1247377 links to [3] [3] https://bugzilla.redhat.com/show_bug.cgi?id=1247379 (no access) some additional informations. I have checked the images on both storages and verified the disk paths with virsh's dumpxml. a) The images and snapshots are on both storages. b) The images on source storage aren't used. (modification time) c) The images on target storage are used. (modification time) d) virsh -r dumpxml tells me disk images are located on _target_ storage. e) Admin interface tells me, that images and snapshot are located on _source_ storage, which isn't true, see b), c) and d). What can we do, to solve this issue? Is this to be corrected in database only? Kind regards Jan Siml ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to assign quota to users/groups
Doron, like I said I not encountered such behavior in 3.5. Thanks - Original Message - From: "Doron Fediuck" To: "Artyom Lukianov" Cc: "Jorick Astrego" , "users" Sent: Thursday, August 27, 2015 2:48:41 PM Subject: Re: [ovirt-users] unable to assign quota to users/groups Please open a BZ and attach a screenshot. Thanks, Doron On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov wrote: > Not in 3.5, in 3.6 we have REST API for quota, but it's really strange, > can you attach screenshot how looks detail panel, when you click on > specific quota. > Thanks > > - Original Message - > From: "Jorick Astrego" > To: users@ovirt.org > Sent: Tuesday, August 25, 2015 1:06:34 PM > Subject: [ovirt-users] unable to assign quota to users/groups > > In 3.5.3, I'm trying to set a quota for each user. But I cannot find how > to do it anymore as the Quota consumers tab is not there in my 3.5.3 > install. > > > 17.8. Using Quota to Limit Resources by User > Summary > This procedure describes how to use quotas to limit the resources a user > has access to. > > Procedure 17.5. Assigning a User to a Quota > > In the tree, click the Data Center with the quota you want to associate > with a User. > Click the Quota tab in the navigation pane. > Select the target quota in the list in the navigation pane. > Click the Consumers tab in the details pane. > Click Add at the top of the details pane. > In the Search field, type the name of the user you want to associate with > the quota. > Click GO. > Select the check box at the left side of the row containing the name of > the target user. > Click OK in the bottom right of the Assign Users and Groups to Quota > window. > Result > After a short time, the user will appear in the Consumers tab of the > details pane. > > What happened to the details pane? Is there another way to assign a quota > to users/groups? > > > > Met vriendelijke groet, With kind regards, > > Jorick Astrego > > Netbulae Virtualization Experts > > Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A > KvK 08198180 > Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede > BTW NL821234584B01 > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to assign quota to users/groups
Please open a BZ and attach a screenshot. Thanks, Doron On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov wrote: > Not in 3.5, in 3.6 we have REST API for quota, but it's really strange, > can you attach screenshot how looks detail panel, when you click on > specific quota. > Thanks > > - Original Message - > From: "Jorick Astrego" > To: users@ovirt.org > Sent: Tuesday, August 25, 2015 1:06:34 PM > Subject: [ovirt-users] unable to assign quota to users/groups > > In 3.5.3, I'm trying to set a quota for each user. But I cannot find how > to do it anymore as the Quota consumers tab is not there in my 3.5.3 > install. > > > 17.8. Using Quota to Limit Resources by User > Summary > This procedure describes how to use quotas to limit the resources a user > has access to. > > Procedure 17.5. Assigning a User to a Quota > > In the tree, click the Data Center with the quota you want to associate > with a User. > Click the Quota tab in the navigation pane. > Select the target quota in the list in the navigation pane. > Click the Consumers tab in the details pane. > Click Add at the top of the details pane. > In the Search field, type the name of the user you want to associate with > the quota. > Click GO. > Select the check box at the left side of the row containing the name of > the target user. > Click OK in the bottom right of the Assign Users and Groups to Quota > window. > Result > After a short time, the user will appear in the Consumers tab of the > details pane. > > What happened to the details pane? Is there another way to assign a quota > to users/groups? > > > > Met vriendelijke groet, With kind regards, > > Jorick Astrego > > Netbulae Virtualization Experts > > Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A > KvK 08198180 > Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede > BTW NL821234584B01 > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3
Hi, yes Centos 7.1 is fully supported OS in oVirt 3.6. I don't have any production setup, but many developers uses Centos 7.1 and AFAIK there are no big issues that prevents you from using Centos 7.1 on engine and hosts. Martin Perina - Original Message - > From: "VONDRA Alain" > To: users@ovirt.org > Sent: Thursday, August 27, 2015 11:57:19 AM > Subject: Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 > > Hi, > Is there anybody having experiences about this operation ? > Thanks > > > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information > Direction Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -Message d'origine- > De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de > VONDRA Alain > Envoyé : mercredi 26 août 2015 15:17 > À : users@ovirt.org > Objet : [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 > > Hello, > Before operating a migration of my oVirt engine, I'd like to know if I can > install my manager directly as host with CentOS 7.1 and oVirt 3.5.3 without > using hosted engine. > I know that with older version we needed to use only hosted engine > installation. > Thanks for your advices. > Alain > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information Direction Administrative et > Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] vm status
Hi, thank you very much for your infos. We had trouble with the Storage and the Datacenter, so we export the vms, delete the old one and made a new one. Now everything is working fine. Best Regards, Michael Am 27.08.2015 11:45, schrieb Piotr Szubiakowski: > Hi, > I had similar problem. I solved it by changing the VM status in engine > database. > > Best Regards, > Peter > > W dniu 27.08.2015 o 10:03, Eli Mesika pisze: >> >> - Original Message - >>> From: "InterNetX - Juergen Gotteswinter" >>> To: "Michael Wagenknecht" , users@ovirt.org >>> Sent: Tuesday, August 25, 2015 8:48:55 PM >>> Subject: Re: [ovirt-users] vm status >>> >>> if the vm is really down, you whould find this helpful >> This will work only if the VM status is LOCKED for any other status, >> it will do nothing >> >>> [root@portal dbscripts]# ./unlock_entity.sh -h >>> Usage: ./unlock_entity.sh [options] [ENTITIES] >>> >>> -h- This help text. >>> -v- Turn on verbosity (WARNING: >>> lots of output) >>> -l LOGFILE- The logfile for capturing output (def. ) >>> -s HOST - The database servername for the database (def. >>> localhost) >>> -p PORT - The database port for the database(def. >>> 5432) >>> -u USER - The username for the database (def. >>> engine) >>> -d DATABASE - The database name (def. >>> engine) >>> -t TYPE - The object type {vm | template | disk | snapshot} >>> -r- Recursive, unlocks all disks under the selected >>> vm/template. >>> -q- Query db and display a list of the locked entites. >>> ENTITIES - The list of object names in case of vm/template, >>> UUIDs in case of a disk >>> >>> NOTE: This utility access the database and should have the >>>corresponding credentals. >>> >>>In case that a password is used to access the database >>> PGPASSWORD >>>or PGPASSFILE should be set. >>> >>> Example: >>> $ PGPASSWORD=xx ./unlock_entity.sh -t disk -q >>> >>> [root@portal dbscripts]# pwd >>> /usr/share/ovirt-engine/dbscripts >>> [root@portal dbscripts]# >>> >>> >>> Am 25.08.2015 um 07:33 schrieb Michael Wagenknecht: Hi all, how can I mark a VM as shut down when the status of the VM is "?"? There is no qemu-kvm process for this VM on the node. But I can't set the node to maintenance mode, because there is a very important VM running. Best Regards, Michael ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3
Hi, Is there anybody having experiences about this operation ? Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -Message d'origine- De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de VONDRA Alain Envoyé : mercredi 26 août 2015 15:17 À : users@ovirt.org Objet : [ovirt-users] CentOS 7.1 compatibility with oVirt 3.5.3 Hello, Before operating a migration of my oVirt engine, I'd like to know if I can install my manager directly as host with CentOS 7.1 and oVirt 3.5.3 without using hosted engine. I know that with older version we needed to use only hosted engine installation. Thanks for your advices. Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] vm status
Hi, I had similar problem. I solved it by changing the VM status in engine database. Best Regards, Peter W dniu 27.08.2015 o 10:03, Eli Mesika pisze: - Original Message - From: "InterNetX - Juergen Gotteswinter" To: "Michael Wagenknecht" , users@ovirt.org Sent: Tuesday, August 25, 2015 8:48:55 PM Subject: Re: [ovirt-users] vm status if the vm is really down, you whould find this helpful This will work only if the VM status is LOCKED for any other status, it will do nothing [root@portal dbscripts]# ./unlock_entity.sh -h Usage: ./unlock_entity.sh [options] [ENTITIES] -h- This help text. -v- Turn on verbosity (WARNING: lots of output) -l LOGFILE- The logfile for capturing output (def. ) -s HOST - The database servername for the database (def. localhost) -p PORT - The database port for the database(def. 5432) -u USER - The username for the database (def. engine) -d DATABASE - The database name (def. engine) -t TYPE - The object type {vm | template | disk | snapshot} -r- Recursive, unlocks all disks under the selected vm/template. -q- Query db and display a list of the locked entites. ENTITIES - The list of object names in case of vm/template, UUIDs in case of a disk NOTE: This utility access the database and should have the corresponding credentals. In case that a password is used to access the database PGPASSWORD or PGPASSFILE should be set. Example: $ PGPASSWORD=xx ./unlock_entity.sh -t disk -q [root@portal dbscripts]# pwd /usr/share/ovirt-engine/dbscripts [root@portal dbscripts]# Am 25.08.2015 um 07:33 schrieb Michael Wagenknecht: Hi all, how can I mark a VM as shut down when the status of the VM is "?"? There is no qemu-kvm process for this VM on the node. But I can't set the node to maintenance mode, because there is a very important VM running. Best Regards, Michael ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] searching vm disks according to vm tags
Hello, Is there a possibility to filter (in manager) all disks which belongs to vms with certain tag? If not I think it would be useful. What do you think? I am trying this: I have about 50 vms with disks on different storages. I have tagged some from this vms by tag "migrate_to_new_storage" and then I would like to move all appropriate disks to new storage. It seems it is not possible from manager (in simple way - it looks like I have to filter vms by tag, then click on every of them, choose disks tab, select them, click move,...). It would also be nice to have possibility to filter by tags also with boolean operator "AND" and not just "OR". Cheers, Jiri <> smime.p7s Description: Elektronicky podpis S/MIME ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] vm status
- Original Message - > From: "InterNetX - Juergen Gotteswinter" > To: "Michael Wagenknecht" , users@ovirt.org > Sent: Tuesday, August 25, 2015 8:48:55 PM > Subject: Re: [ovirt-users] vm status > > if the vm is really down, you whould find this helpful This will work only if the VM status is LOCKED for any other status, it will do nothing > > [root@portal dbscripts]# ./unlock_entity.sh -h > Usage: ./unlock_entity.sh [options] [ENTITIES] > > -h- This help text. > -v- Turn on verbosity (WARNING: > lots of output) > -l LOGFILE- The logfile for capturing output (def. ) > -s HOST - The database servername for the database (def. > localhost) > -p PORT - The database port for the database(def. 5432) > -u USER - The username for the database (def. engine) > -d DATABASE - The database name (def. engine) > -t TYPE - The object type {vm | template | disk | snapshot} > -r- Recursive, unlocks all disks under the selected > vm/template. > -q- Query db and display a list of the locked entites. > ENTITIES - The list of object names in case of vm/template, > UUIDs in case of a disk > > NOTE: This utility access the database and should have the > corresponding credentals. > > In case that a password is used to access the database PGPASSWORD > or PGPASSFILE should be set. > > Example: > $ PGPASSWORD=xx ./unlock_entity.sh -t disk -q > > [root@portal dbscripts]# pwd > /usr/share/ovirt-engine/dbscripts > [root@portal dbscripts]# > > > Am 25.08.2015 um 07:33 schrieb Michael Wagenknecht: > > Hi all, > > how can I mark a VM as shut down when the status of the VM is "?"? > > There is no qemu-kvm process for this VM on the node. > > But I can't set the node to maintenance mode, because there is a very > > important VM running. > > > > Best Regards, > > Michael > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users