I've tried again and made sure all hosts have same clock.
After added all 3 hosts, I tested it by shutting down host01. The engine
was restarted on host02 in less than 2 minutes. I enabled and tested
power management on all hosts (using ilo4), then tried disabling
host02's network to test the
On Wed, May 4, 2016 at 8:52 AM, knarra wrote:
> Hi All,
>
> I have hosted engine setup with glusterfs as my storage domain. when i
> move a storage domain to maintenance and activate it again i see that there
> are two glusterfs process running for every storage domain. Is this expected
> beha
Hi All,
I have hosted engine setup with glusterfs as my storage domain.
when i move a storage domain to maintenance and activate it again i see
that there are two glusterfs process running for every storage domain.
Is this expected behaviour or a bug ?
root 27143 0.0 0.0 451308 405
Outstanding! Thank you Sahina! Your assistance is much appreciated.
When I saw your email it reminded me that the versions were different and I was
having an issue with reaching the internet from the engine storage servers. A
DNS issue between my private DNS server and my organization's DNS serve
Thank you Simone!
-Original Message-
From: Simone Tiraboschi [mailto:stira...@redhat.com]
Sent: Tuesday, May 3, 2016 12:34 AM
To: Langley, Robert
Cc: users@ovirt.org
Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert
I just do a full clone of the whole VM and the clone is running fine and
have the last data on all disks.
gruss ivo
On 03.05.2016 20:12, Markus Stockhausen wrote:
Hi,
we've seen a lot of trouble when deleting snapshots of multidisk VMs.
Especially endless running snapshot deletions is one
Salü Markus
Yes, i saw also some postings arround, but no solution and all of them
was a bit different than our situation.
The VM is always responsible, as long as we don't shut it down.
I need to have a focus on it, but I think when I do it like this:
delete all snapshots
moving 1st Disk -
Hi,
we've seen a lot of trouble when deleting snapshots of multidisk VMs.
Especially endless running snapshot deletions is one of our culprits.
More here: https://bugzilla.redhat.com/show_bug.cgi?id=1319400
Markus
Von: users-boun...@ovirt.org [users-boun..
Hi oVirt List
We have the problem, that two of our VM's have "Locked" snapshots and we
can't go forward. From 10 VM's which we move from one store to another,
we have problems with 5 of them to delete the snapshots. But with a lot
of luck, the snapshot was always on the dedicated Swap-Disk, s
> >
> > Is it possible now to search for groups instead of users / manipulate
> > groups in the web interface ?
> Sure, if you type some search term into UI users/permissions dialog it
> will also search for groups.
Thank you for all your answers, we can say my problem is now solved
>Note in 4
Hi Yedidyah,
The conf.d folder is all name with foreman config file, all related with
Ovirt is gone.
I try to run the given command and it try to setup a new https webadmin
portal? I afraid the previous before install foreman the webadmin portal
running with all the VM and configuration will it i
On Tuesday, May 03, 2016 03:58:27 PM Ondra Machacek wrote:
> On 05/03/2016 03:13 PM, Alexis HAUSER wrote:
> >> Or do you use rfc2307? You can find out running this command:
> >> LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
> >>
> >> 'ou=people,o=unix,dc=somewhere,dc=any' -D
> >> 'cn=
On 05/03/2016 03:13 PM, Alexis HAUSER wrote:
Or do you use rfc2307? You can find out running this command:
LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
'ou=people,o=unix,dc=somewhere,dc=any' -D
'cn=mysearchuser,ou=admin,o=unix,dc=somewhere,dc=any' -W
'(&(objectClass=posixAccount)(
>Or do you use rfc2307? You can find out running this command:
> LDAPTLS_REQCERT=never ldapsearch -x -H ldaps://myldap -b
>'ou=people,o=unix,dc=somewhere,dc=any' -D
>'cn=mysearchuser,ou=admin,o=unix,dc=somewhere,dc=any' -W
>'(&(objectClass=posixAccount)(uid=*)(uid=myuser))'
>If ^this command
On 05/03/2016 11:58 AM, Alexis HAUSER wrote:
Thank you, now I see the correct namespace shown, but still no way to login
with any user...Any idea ?
Hard to say without logs, can you please share log output of
ovirt-engine-extensions-tool?
Please run it with:
ovirt-engine-extensions-tool -
Hello,
I attach to this thread to detail how I was able to have serial console
working both on CentOS 6.7 and CentOS 7.2 VMs on 3.6.5
- CentOS 6.7
Basically what described in general here (but using ttyS0 instead ttyS1):
http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-console/
So in /bo
There is this bug https://bugzilla.redhat.com/1270562 which forces
OVF_STORE update but it is not yet implemented.
On Tue, May 3, 2016 at 8:52 AM, Sahina Bose wrote:
>
>
> On 05/02/2016 09:36 PM, Maor Lipchuk wrote:
>>
>> On Mon, May 2, 2016 at 5:45 PM, Sahina Bose wrote:
>>>
>>>
>>>
>>> On 05/0
On 05/03/2016 11:03 AM, Alexis HAUSER wrote:
However, I can't login with any user...But with ldapsearch I can find those
users with uid=user
I used ovirt-engine-extensions-tool aaa login-user --profile=xxx
--user-name=xxx
and I realize now what is the problem : the available namespaces show
>> However, I can't login with any user...But with ldapsearch I can find those
>> users with uid=user
>>
>> I used ovirt-engine-extensions-tool aaa login-user --profile=xxx
>> --user-name=xxx
>> and I realize now what is the problem : the available namespaces shows the
>> wrong dn. It should b
On 05/03/2016 10:28 AM, Alexis HAUSER wrote:
Are you sure you've specified correct CA?
Can you try running this command:
LDAPTLS_CACERT=your_ldap_ca_cert.crt ldapsearch -H ldaps://@HOST@ -x
-D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'
If it fail then most probably you have incorrect CA certific
>Are you sure you've specified correct CA?
>
>Can you try running this command:
> LDAPTLS_CACERT=your_ldap_ca_cert.crt ldapsearch -H ldaps://@HOST@ -x
>-D '@USERDN@' -w '@USERPW@' -b '@BASEDN@'
>
>If it fail then most probably you have incorrect CA certificate.
>If it succeed, please open bug in
On 3/5/2559 13:25, knarra wrote:
On 05/03/2016 08:35 AM, Wee Sritippho wrote:
Hi,
I'm making a fresh hosted-engine installation on 3 hosts. First 2
hosts succeeded, but the 3rd one stuck at termination state
"Installing Host hosted_engine_3. Stage: Termination.", then, 3
minutes later, "VDSM
On Mon, May 2, 2016 at 9:15 PM, Gianluca Cecchi
wrote:
>
>
> On Mon, May 2, 2016 at 8:39 PM, Gianluca Cecchi
> wrote:
>>
>> On Mon, May 2, 2016 at 11:14 AM, Simone Tiraboschi
>> wrote:
>>>
>>>
>>> >>>
>>> >>> Can you please check the entropy value on your host?
>>> >>> cat /proc/sys/kernel/rand
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert
wrote:
> Hi Sahina,
>
>
>
> Thank you for your response. Let me know if you’ll need any of the log
> before the Storage Configuration section. I looked at this earlier and I was
> wondering why, after choosing to use GlusterFS, there is still referen
On Tue, May 3, 2016 at 5:05 AM, Wee Sritippho wrote:
> Hi,
>
> I'm making a fresh hosted-engine installation on 3 hosts. First 2 hosts
> succeeded, but the 3rd one stuck at termination state "Installing Host
> hosted_engine_3. Stage: Termination.", then, 3 minutes later, "VDSM
> hosted_engine_3 co
25 matches
Mail list logo