Re: [ovirt-users] host gaga and ovirt cannt control it.

[Ramesh Nachimuthu]

Can you explain state of your setup now. May be a screen shot of the 'Hosts' 
tab and logs from /var/log/ovirt-engine/engine.log should help us to understand 
the situation there.

Regards,
Ramesh




- Original Message -
> From: "Thing" 
> To: "users" 
> Sent: Thursday, October 27, 2016 9:03:22 AM
> Subject: [ovirt-users] host gaga and ovirt cannt control it.
> 
> Ok, I have struggled with this for 2 hours now, glusterp2 and the ovirt
> server are basically not talking at all. I have rebooted both, I dont know
> how many times. Reading via google there seems to be no fix for this bar a
> manual hack of the ovirt server's database to delete the host glusterp2? or
> it it re-install from scratch time?
> 
> If I have to re-install from scratch, is it best to go back a version of
> ovirt say to 3.6?
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] host gaga and ovirt cannt control it.

[Thing]

Ok, I have struggled with this for 2 hours now, glusterp2 and the ovirt
server are basically not talking at all.  I have rebooted both, I dont know
how many times.  Reading via google there seems to be no fix for this bar a
manual hack of the ovirt server's database to delete the host glusterp2?
or it it re-install from scratch time?

If I have to re-install from scratch, is it best to go back a version of
ovirt say to 3.6?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] failed to activate a (gluster) host. ovirt 4.0.4

[Tom Gamull]

This is pointing to network connectivity issues

You can look at logs under /var/logs/ovirt-*

Check your dns and make sure the hosts can connect to each other.  You can 
restart the host, mark it as restarted in the manager and then activate it.

Worst case, you can remove it using hosted-engine commands

Tom

> On Oct 26, 2016, at 8:53 PM, Thing  wrote:
> 
> from the engine log I see,
> 
> 
> 2016-10-27 13:45:24,595 INFO  
> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
> (DefaultQuartzScheduler2) [3877c2ef] START, 
> GetGlusterHostUUIDVDSCommand(HostName = glusterp1, 
> VdsIdVDSCommandParametersBase:{runAsync='true', 
> hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'}), log id: 51f83f78
> 2016-10-27 13:46:15,780 INFO  
> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
> (DefaultQuartzScheduler3) [] No up server in cluster
> 2016-10-27 13:47:12,326 INFO  
> [org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob] 
> (DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster 'Default' 
> for snapshot monitoring
> 2016-10-27 13:47:12,329 INFO  
> [org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob] 
> (DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster 'Default' 
> for snapshot configurations monitoring
> 2016-10-27 13:47:15,783 INFO  
> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
> (DefaultQuartzScheduler4) [27554ab4] No up server in cluster
> 2016-10-27 13:48:15,785 INFO  
> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
> (DefaultQuartzScheduler4) [27554ab4] No up server in cluster
> 2016-10-27 13:48:24,879 ERROR 
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (DefaultQuartzScheduler2) [3877c2ef] Correlation ID: null, Call Stack: null, 
> Custom Event ID: -1, Message: VDSM glusterp1 command failed: Message timeout 
> which can be caused by communication issues
> 2016-10-27 13:48:24,879 ERROR 
> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
> (DefaultQuartzScheduler2) [3877c2ef] Command 
> 'GetGlusterHostUUIDVDSCommand(HostName = glusterp1, 
> VdsIdVDSCommandParametersBase:{runAsync='true', 
> hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'})' execution failed: 
> VDSGenericException: VDSNetworkException: Message timeout which can be caused 
> by communication issues
> 2016-10-27 13:48:24,879 INFO  
> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
> (DefaultQuartzScheduler2) [3877c2ef] FINISH, GetGlusterHostUUIDVDSCommand, 
> log id: 51f83f78
> 2016-10-27 13:48:24,879 ERROR [org.ovirt.engine.core.bll.InitVdsOnUpCommand] 
> (DefaultQuartzScheduler2) [3877c2ef] Command 
> 'org.ovirt.engine.core.bll.InitVdsOnUpCommand' failed: EngineException: 
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: 
> VDSGenericException: VDSNetworkException: Message timeout which can be caused 
> by communication issues (Failed with error VDS_NETWORK_ERROR and code 5022)
> 2016-10-27 13:48:24,887 ERROR 
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (DefaultQuartzScheduler2) [3877c2ef] Correlation ID: 3877c2ef, Call Stack: 
> null, Custom Event ID: -1, Message: Failed to fetch gluster peer list from 
> server glusterp1 on Cluster Default.
> 2016-10-27 13:48:24,908 INFO  
> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] (DefaultQuartzScheduler2) 
> [6083469d] Running command: HandleVdsVersionCommand internal: true. Entities 
> affected :  ID: 260c0a92-2856-4cd6-a784-01ac95fc41d5 Type: VDS
> 2016-10-27 13:48:24,959 INFO  [org.ovirt.engine.core.vdsbroker.VdsManager] 
> (org.ovirt.thread.pool-8-thread-42) [3877c2ef] Server failed to respond, 
> vds_id='260c0a92-2856-4cd6-a784-01ac95fc41d5', vds_name='glusterp1', 
> vm_count=0, spm_status='None', non-responsive_timeout (seconds)=60, error: 
> VDSGenericException: VDSNetworkException: Message timeout which can be caused 
> by communication issues
> 2016-10-27 13:48:25,003 ERROR 
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (org.ovirt.thread.pool-8-thread-42) [3877c2ef] Correlation ID: null, Call 
> Stack: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: 
> VDSGenericException: VDSNetworkException: Message timeout which can be caused 
> by communication issues
> at 
> org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase.proceedProxyReturnValue(BrokerCommandBase.java:188)
> at 
> org.ovirt.engine.core.vdsbroker.gluster.AbstractGlusterBrokerCommand.proceedProxyReturnValue(AbstractGlusterBrokerCommand.java:122)
> at 
> org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand.executeVdsBrokerCommand(GetGlusterHostUUIDVDSCommand.java:19)
> at 
> org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand.executeVDSCommand(VdsBrokerCommand.java:110)
> at 
> org.ovirt.engine.core.vdsbroker.VDSCommandBase.executeCommand(VDSCommandBase.java:73)
> 

Re: [ovirt-users] failed to activate a (gluster) host. ovirt 4.0.4

[Tom Gamull]

What does gluster peer status say on each host?

Tom Gamull
Red Hat | Solutions Architect
(404) 494-0280 | @magicalyak

> On Oct 26, 2016, at 8:55 PM, Tom Gamull  wrote:
> 
> This is pointing to network connectivity issues
> 
> You can look at logs under /var/logs/ovirt-*
> 
> Check your dns and make sure the hosts can connect to each other.  You can 
> restart the host, mark it as restarted in the manager and then activate it.
> 
> Worst case, you can remove it using hosted-engine commands
> 
> Tom
> 
>> On Oct 26, 2016, at 8:53 PM, Thing > > wrote:
>> 
>> from the engine log I see,
>> 
>> 
>> 2016-10-27 13:45:24,595 INFO  
>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
>> (DefaultQuartzScheduler2) [3877c2ef] START, 
>> GetGlusterHostUUIDVDSCommand(HostName = glusterp1, 
>> VdsIdVDSCommandParametersBase:{runAsync='true', 
>> hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'}), log id: 51f83f78
>> 2016-10-27 13:46:15,780 INFO  
>> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
>> (DefaultQuartzScheduler3) [] No up server in cluster
>> 2016-10-27 13:47:12,326 INFO  
>> [org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob] 
>> (DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster 
>> 'Default' for snapshot monitoring
>> 2016-10-27 13:47:12,329 INFO  
>> [org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob] 
>> (DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster 
>> 'Default' for snapshot configurations monitoring
>> 2016-10-27 13:47:15,783 INFO  
>> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
>> (DefaultQuartzScheduler4) [27554ab4] No up server in cluster
>> 2016-10-27 13:48:15,785 INFO  
>> [org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService] 
>> (DefaultQuartzScheduler4) [27554ab4] No up server in cluster
>> 2016-10-27 13:48:24,879 ERROR 
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
>> (DefaultQuartzScheduler2) [3877c2ef] Correlation ID: null, Call Stack: null, 
>> Custom Event ID: -1, Message: VDSM glusterp1 command failed: Message timeout 
>> which can be caused by communication issues
>> 2016-10-27 13:48:24,879 ERROR 
>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
>> (DefaultQuartzScheduler2) [3877c2ef] Command 
>> 'GetGlusterHostUUIDVDSCommand(HostName = glusterp1, 
>> VdsIdVDSCommandParametersBase:{runAsync='true', 
>> hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'})' execution failed: 
>> VDSGenericException: VDSNetworkException: Message timeout which can be 
>> caused by communication issues
>> 2016-10-27 13:48:24,879 INFO  
>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand] 
>> (DefaultQuartzScheduler2) [3877c2ef] FINISH, GetGlusterHostUUIDVDSCommand, 
>> log id: 51f83f78
>> 2016-10-27 13:48:24,879 ERROR [org.ovirt.engine.core.bll.InitVdsOnUpCommand] 
>> (DefaultQuartzScheduler2) [3877c2ef] Command 
>> 'org.ovirt.engine.core.bll.InitVdsOnUpCommand' failed: EngineException: 
>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: 
>> VDSGenericException: VDSNetworkException: Message timeout which can be 
>> caused by communication issues (Failed with error VDS_NETWORK_ERROR and code 
>> 5022)
>> 2016-10-27 13:48:24,887 ERROR 
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
>> (DefaultQuartzScheduler2) [3877c2ef] Correlation ID: 3877c2ef, Call Stack: 
>> null, Custom Event ID: -1, Message: Failed to fetch gluster peer list from 
>> server glusterp1 on Cluster Default.
>> 2016-10-27 13:48:24,908 INFO  
>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] 
>> (DefaultQuartzScheduler2) [6083469d] Running command: 
>> HandleVdsVersionCommand internal: true. Entities affected :  ID: 
>> 260c0a92-2856-4cd6-a784-01ac95fc41d5 Type: VDS
>> 2016-10-27 13:48:24,959 INFO  [org.ovirt.engine.core.vdsbroker.VdsManager] 
>> (org.ovirt.thread.pool-8-thread-42) [3877c2ef] Server failed to respond, 
>> vds_id='260c0a92-2856-4cd6-a784-01ac95fc41d5', vds_name='glusterp1', 
>> vm_count=0, spm_status='None', non-responsive_timeout (seconds)=60, error: 
>> VDSGenericException: VDSNetworkException: Message timeout which can be 
>> caused by communication issues
>> 2016-10-27 13:48:25,003 ERROR 
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
>> (org.ovirt.thread.pool-8-thread-42) [3877c2ef] Correlation ID: null, Call 
>> Stack: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: 
>> VDSGenericException: VDSNetworkException: Message timeout which can be 
>> caused by communication issues
>> at 
>> org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase.proceedProxyReturnValue(BrokerCommandBase.java:188)
>> at 
>> org.ovirt.engine.core.vdsbroker.gluster.AbstractGlusterBrokerCommand.proceedProxyReturnValue(AbstractGlusterBrokerCommand.java:122)
>> at 
>> 

Re: [ovirt-users] failed to activate a (gluster) host. ovirt 4.0.4

[Thing]

from the engine log I see,


2016-10-27 13:45:24,595 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand]
(DefaultQuartzScheduler2) [3877c2ef] START,
GetGlusterHostUUIDVDSCommand(HostName = glusterp1,
VdsIdVDSCommandParametersBase:{runAsync='true',
hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'}), log id: 51f83f78
2016-10-27 13:46:15,780 INFO
[org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService]
(DefaultQuartzScheduler3) [] No up server in cluster
2016-10-27 13:47:12,326 INFO
[org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob]
(DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster
'Default' for snapshot monitoring
2016-10-27 13:47:12,329 INFO
[org.ovirt.engine.core.bll.gluster.GlusterSnapshotSyncJob]
(DefaultQuartzScheduler10) [76412dcc] No UP server found in cluster
'Default' for snapshot configurations monitoring
2016-10-27 13:47:15,783 INFO
[org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService]
(DefaultQuartzScheduler4) [27554ab4] No up server in cluster
2016-10-27 13:48:15,785 INFO
[org.ovirt.engine.core.bll.gluster.tasks.GlusterTasksService]
(DefaultQuartzScheduler4) [27554ab4] No up server in cluster
2016-10-27 13:48:24,879 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler2) [3877c2ef] Correlation ID: null, Call Stack:
null, Custom Event ID: -1, Message: VDSM glusterp1 command failed: Message
timeout which can be caused by communication issues
2016-10-27 13:48:24,879 ERROR
[org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand]
(DefaultQuartzScheduler2) [3877c2ef] Command
'GetGlusterHostUUIDVDSCommand(HostName = glusterp1,
VdsIdVDSCommandParametersBase:{runAsync='true',
hostId='260c0a92-2856-4cd6-a784-01ac95fc41d5'})' execution failed:
VDSGenericException: VDSNetworkException: Message timeout which can be
caused by communication issues
2016-10-27 13:48:24,879 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand]
(DefaultQuartzScheduler2) [3877c2ef] FINISH, GetGlusterHostUUIDVDSCommand,
log id: 51f83f78
2016-10-27 13:48:24,879 ERROR
[org.ovirt.engine.core.bll.InitVdsOnUpCommand] (DefaultQuartzScheduler2)
[3877c2ef] Command 'org.ovirt.engine.core.bll.InitVdsOnUpCommand' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Message timeout which can be
caused by communication issues (Failed with error VDS_NETWORK_ERROR and
code 5022)
2016-10-27 13:48:24,887 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler2) [3877c2ef] Correlation ID: 3877c2ef, Call Stack:
null, Custom Event ID: -1, Message: Failed to fetch gluster peer list from
server glusterp1 on Cluster Default.
2016-10-27 13:48:24,908 INFO
[org.ovirt.engine.core.bll.HandleVdsVersionCommand]
(DefaultQuartzScheduler2) [6083469d] Running command:
HandleVdsVersionCommand internal: true. Entities affected :  ID:
260c0a92-2856-4cd6-a784-01ac95fc41d5 Type: VDS
2016-10-27 13:48:24,959 INFO  [org.ovirt.engine.core.vdsbroker.VdsManager]
(org.ovirt.thread.pool-8-thread-42) [3877c2ef] Server failed to respond,
vds_id='260c0a92-2856-4cd6-a784-01ac95fc41d5', vds_name='glusterp1',
vm_count=0, spm_status='None', non-responsive_timeout (seconds)=60, error:
VDSGenericException: VDSNetworkException: Message timeout which can be
caused by communication issues
2016-10-27 13:48:25,003 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-42) [3877c2ef] Correlation ID: null, Call
Stack: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Message timeout which can be
caused by communication issues
at
org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase.proceedProxyReturnValue(BrokerCommandBase.java:188)
at
org.ovirt.engine.core.vdsbroker.gluster.AbstractGlusterBrokerCommand.proceedProxyReturnValue(AbstractGlusterBrokerCommand.java:122)
at
org.ovirt.engine.core.vdsbroker.gluster.GetGlusterHostUUIDVDSCommand.executeVdsBrokerCommand(GetGlusterHostUUIDVDSCommand.java:19)
at
org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand.executeVDSCommand(VdsBrokerCommand.java:110)
at
org.ovirt.engine.core.vdsbroker.VDSCommandBase.executeCommand(VDSCommandBase.java:73)
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
at
org.ovirt.engine.core.vdsbroker.ResourceManager.runVdsCommand(ResourceManager.java:451)
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
at
org.ovirt.engine.core.bll.CommandBase.runVdsCommand(CommandBase.java:2171)
at
org.ovirt.engine.core.bll.storage.StorageHandlingCommandBase.runVdsCommand(StorageHandlingCommandBase.java:657)
at
org.ovirt.engine.core.bll.InitVdsOnUpCommand.initGlusterHost(InitVdsOnUpCommand.java:397)
at

[ovirt-users] failed to activate a (gluster) host. ovirt 4.0.4

[Thing]

While trying to figure out how to deploy storage I put 1 host into
maintenance mode, trying to re-activate it and its failed.

It seems to be stuck as neither in activated nor maintenance, so how would
I go about fixing this?

So what log(s) would this be written to?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] low level Image copy failed

[Nir Soffer]

On Tue, Oct 25, 2016 at 10:04 PM, Jonas Israelsson
 wrote:
> Here's the original volume metadata
...
> FORMAT=RAW
> SIZE=67108864
> TYPE=PREALLOCATED
...
> And here's the LV
...
> LV Creation host, time moe.mgmt.elementary.se, 2016-01-18 12:06:48 +
> LV Size35.25 GiB
> Current LE 282
...
> That disk is created inside oVirt, and I can not explain how it could have
> grown beyond 32G

Do you have logs from January 2016, showing how this disk was created?

I'm sure the disk was not created from oVirt UI, since you cannot specify
size of 35.25 G, only integer values.

35.25G is exactly 32G * 1.1, rounded up to the next extent size (128M).
We do this calculation when estimating the size of a sparse volume.

Maybe this disk started as thin provisioned disk on another storage domain,
and was converted to preallocated volume on January 2016? Or maybe this
disk is a result of a merge?

Nir
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Upgrading oVirt 3.6 with existing HTTPS certificate signed by custom CA to oVirt 4

[Kenneth Bingham]

I did install a server certificate from a private CA on the engine server
for the oVirt 4 Manager GUI, but haven't figured out how to configure
engine to trust the same CA which also issued the server certificate
presented by vdsm. This is important for us because this is the same server
certificate presented by the host when using the console (e.g. websocket
console falls silently if the user agent doesn't trust the console server's
certificate).

On Wed, Oct 26, 2016, 16:58 Beckman, Daniel <
daniel.beck...@ingramcontent.com> wrote:

> We have oVirt 3.6.7 and I am preparing to upgrade to 4.0.4 release. I read
> the release notes (https://www.ovirt.org/release/4.0.4/) and noted
> comment #4 under “Install / Upgrade from previous version”:
>
>
>
> *If you are using HTTPS certificate signed by custom certificate
> authority, please take a look at https://bugzilla.redhat.com/1336838
>  for steps which need to be done after
> migration to 4.0. Also please consult https://bugzilla.redhat.com/1313379
>  how to setup this custom CA for use
> with virt-viewer clients.*
>
>
>
> So I referred to the first bugzilla (
> https://bugzilla.redhat.com/show_bug.cgi?id=1336838), where it states as
> follows:
>
>
>
> If customer wants to use custom HTTPS certificate signed by different CA,
> then he has to perform following steps:
>
>
>
> 1. Install custom CA (that signed HTTPS certificate) into host wide
> trustore (more info can be found in update-ca-trust man page)
>
>
>
> 2. Configure HTTPS certificate in Apache (this step is same as in previous
> versions)
>
>
>
> 3. Create new configuration file (for example
> /etc/ovirt-engine/engine.conf.d/99-custom-truststore.conf) with following
> content:
>
> ENGINE_HTTPS_PKI_TRUST_STORE="/etc/pki/java/cacerts"
> ENGINE_HTTPS_PKI_TRUST_STORE_PASSWORD=""
>
>
>
> 4. Restart ovirt-engine service
>
>
>
> I find it humorous that step # 1 suggests reading the “man page” which is
> only slightly better than suggesting to “google” it.
>
>
>
> Has anyone using a custom CA for their HTTPS certificate successfully
> upgraded to oVirt 4? If so could you share your detailed steps? Or can
> anyone point me to an actual example of this procedure? I’m a little
> nervous about the upgrade if you can’t already tell.
>
>
>
> Thanks,
>
> Daniel
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] adding 3 machines as gluster nodes to ovirt 4.0.4

[Thing]

any idea why the ssh keys are failing?

On 27 October 2016 at 11:08, Thing  wrote:

> oopsie  " Are the three hosts subscribed to the ovirt repos?"
>
> no, I will try again doing so.  I didnt notice this as a requirement so I
> assumed the method was the ovirt server uploaded the needed packages to
> each host.
>
>
>
> On 26 October 2016 at 17:52, Sahina Bose  wrote:
>
>> If you want these hosts to run only gluster service - create a cluster
>> with "Enable gluster service" checked and "Enable Virt Service" unchecked
>> (i.e disabled).
>> You should then add your 3 hosts to this cluster. Are the three hosts
>> subscribed to the ovirt repos? - During installation, the required packages
>> are pulled in from the repos. So install the ovirt-release- rpm on
>> the hosts.
>>
>> After you do this, if the process still fails, please provide the
>> installation logs (host-deploy logs). Installation failure in ovirt-engine
>> will provide the path to the logs.
>>
>> HTH,
>> sahina
>>
>> On Wed, Oct 26, 2016 at 4:06 AM, Thing  wrote:
>>
>>> Hi,
>>>
>>> I have ovirt 4.0.4 running on a centos 7.2 machine.
>>>
>>> I have 3 identical centos 7.2 machines I want to add as a gluster
>>> storage 3 way mirror array.  The admin guide doesnt seem to show how to do
>>> this?  I have setup ssh keys for root access.  I have setup a 1TB LUN on
>>> each ready for "glusterising".  I have tried to build and setup gluster
>>> before ahnd and import the ready made setup but this locked up in
>>> "activating" and after 36hours never completed (I assume they should move
>>> to "up"?)
>>>
>>> Is there any documentation out there on how?   I want these as pure
>>> gluster storage only nodes no VMs to go on them.  The VMs will go on 2 or 3
>>> new machines I will add later as a next stage.
>>>
>>> I have tried to add them as hosts (not sure if this is the right method
>>> I suspect not), but I get install failures in the engine.log
>>>
>>> sample,
>>>
>>> =
>>>
>>> 2016-10-26 11:28:13,899 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog]
>>> (org.ovirt.thread.pool-8-thread-21) [2a413474] SSH error running
>>> command root@192.168.1.31:'umask 0077; MYTMP="$(TMPDIR="${OVIRT_TMPDIR}"
>>> mktemp -d -t ovirt-XX)"; trap "chmod -R u+rwX \"${MYTMP}\" >
>>> /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; tar
>>> --warning=no-timestamp -C "${MYTMP}" -x &&  "${MYTMP}"/ovirt-host-deploy
>>> DIALOG/dialect=str:machine DIALOG/customization=bool:True': Command
>>> returned failure code 1 during SSH session 'root@192.168.1.31'
>>> 2016-10-26 11:28:13,899 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog]
>>> (org.ovirt.thread.pool-8-thread-21) [2a413474] Exception:
>>> java.io.IOException: Command returned failure code 1 during SSH session '
>>> root@192.168.1.31'
>>> at 
>>> org.ovirt.engine.core.uutils.ssh.SSHClient.executeCommand(SSHClient.java:526)
>>> [uutils.jar:]
>>> at 
>>> org.ovirt.engine.core.uutils.ssh.SSHDialog.executeCommand(SSHDialog.java:317)
>>> [uutils.jar:]
>>> at 
>>> org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase.execute(VdsDeployBase.java:563)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalComma
>>> nd.installHost(InstallVdsInternalCommand.java:169) [bll.jar:]
>>> at org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalComma
>>> nd.executeCommand(InstallVdsInternalCommand.java:90) [bll.jar:]
>>> at 
>>> org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1305)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.bll.CommandBase.executeActionInTransac
>>> tionScope(CommandBase.java:1447) [bll.jar:]
>>> at 
>>> org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:2075)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.utils.transaction.TransactionSupport.e
>>> xecuteInSuppressed(TransactionSupport.java:166) [utils.jar:]
>>> at org.ovirt.engine.core.utils.transaction.TransactionSupport.e
>>> xecuteInScope(TransactionSupport.java:105) [utils.jar:]
>>> at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1490)
>>> [bll.jar:]
>>> at 
>>> org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:398)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>>> .executeValidatedCommand(PrevalidatingMultipleActionsRunner.java:204)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>>> .runCommands(PrevalidatingMultipleActionsRunner.java:176) [bll.jar:]
>>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>>> .lambda$invokeCommands$3(PrevalidatingMultipleActionsRunner.java:182)
>>> [bll.jar:]
>>> at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$Intern
>>> alWrapperRunnable.run(ThreadPoolUtil.java:92) [utils.jar:]
>>> at 
>>> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
>>> 

Re: [ovirt-users] adding 3 machines as gluster nodes to ovirt 4.0.4

[Thing]

oopsie  " Are the three hosts subscribed to the ovirt repos?"

no, I will try again doing so.  I didnt notice this as a requirement so I
assumed the method was the ovirt server uploaded the needed packages to
each host.



On 26 October 2016 at 17:52, Sahina Bose  wrote:

> If you want these hosts to run only gluster service - create a cluster
> with "Enable gluster service" checked and "Enable Virt Service" unchecked
> (i.e disabled).
> You should then add your 3 hosts to this cluster. Are the three hosts
> subscribed to the ovirt repos? - During installation, the required packages
> are pulled in from the repos. So install the ovirt-release- rpm on
> the hosts.
>
> After you do this, if the process still fails, please provide the
> installation logs (host-deploy logs). Installation failure in ovirt-engine
> will provide the path to the logs.
>
> HTH,
> sahina
>
> On Wed, Oct 26, 2016 at 4:06 AM, Thing  wrote:
>
>> Hi,
>>
>> I have ovirt 4.0.4 running on a centos 7.2 machine.
>>
>> I have 3 identical centos 7.2 machines I want to add as a gluster storage
>> 3 way mirror array.  The admin guide doesnt seem to show how to do this?  I
>> have setup ssh keys for root access.  I have setup a 1TB LUN on each ready
>> for "glusterising".  I have tried to build and setup gluster before ahnd
>> and import the ready made setup but this locked up in "activating" and
>> after 36hours never completed (I assume they should move to "up"?)
>>
>> Is there any documentation out there on how?   I want these as pure
>> gluster storage only nodes no VMs to go on them.  The VMs will go on 2 or 3
>> new machines I will add later as a next stage.
>>
>> I have tried to add them as hosts (not sure if this is the right method I
>> suspect not), but I get install failures in the engine.log
>>
>> sample,
>>
>> =
>>
>> 2016-10-26 11:28:13,899 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog]
>> (org.ovirt.thread.pool-8-thread-21) [2a413474] SSH error running command
>> root@192.168.1.31:'umask 0077; MYTMP="$(TMPDIR="${OVIRT_TMPDIR}" mktemp
>> -d -t ovirt-XX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null
>> 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; tar --warning=no-timestamp
>> -C "${MYTMP}" -x &&  "${MYTMP}"/ovirt-host-deploy
>> DIALOG/dialect=str:machine DIALOG/customization=bool:True': Command
>> returned failure code 1 during SSH session 'root@192.168.1.31'
>> 2016-10-26 11:28:13,899 ERROR [org.ovirt.engine.core.uutils.ssh.SSHDialog]
>> (org.ovirt.thread.pool-8-thread-21) [2a413474] Exception:
>> java.io.IOException: Command returned failure code 1 during SSH session '
>> root@192.168.1.31'
>> at 
>> org.ovirt.engine.core.uutils.ssh.SSHClient.executeCommand(SSHClient.java:526)
>> [uutils.jar:]
>> at 
>> org.ovirt.engine.core.uutils.ssh.SSHDialog.executeCommand(SSHDialog.java:317)
>> [uutils.jar:]
>> at 
>> org.ovirt.engine.core.bll.hostdeploy.VdsDeployBase.execute(VdsDeployBase.java:563)
>> [bll.jar:]
>> at org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalComma
>> nd.installHost(InstallVdsInternalCommand.java:169) [bll.jar:]
>> at org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalComma
>> nd.executeCommand(InstallVdsInternalCommand.java:90) [bll.jar:]
>> at 
>> org.ovirt.engine.core.bll.CommandBase.executeWithoutTransaction(CommandBase.java:1305)
>> [bll.jar:]
>> at org.ovirt.engine.core.bll.CommandBase.executeActionInTransac
>> tionScope(CommandBase.java:1447) [bll.jar:]
>> at 
>> org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:2075)
>> [bll.jar:]
>> at org.ovirt.engine.core.utils.transaction.TransactionSupport.e
>> xecuteInSuppressed(TransactionSupport.java:166) [utils.jar:]
>> at org.ovirt.engine.core.utils.transaction.TransactionSupport.e
>> xecuteInScope(TransactionSupport.java:105) [utils.jar:]
>> at org.ovirt.engine.core.bll.CommandBase.execute(CommandBase.java:1490)
>> [bll.jar:]
>> at 
>> org.ovirt.engine.core.bll.CommandBase.executeAction(CommandBase.java:398)
>> [bll.jar:]
>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>> .executeValidatedCommand(PrevalidatingMultipleActionsRunner.java:204)
>> [bll.jar:]
>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>> .runCommands(PrevalidatingMultipleActionsRunner.java:176) [bll.jar:]
>> at org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner
>> .lambda$invokeCommands$3(PrevalidatingMultipleActionsRunner.java:182)
>> [bll.jar:]
>> at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$Intern
>> alWrapperRunnable.run(ThreadPoolUtil.java:92) [utils.jar:]
>> at 
>> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
>> [rt.jar:1.8.0_111]
>> at java.util.concurrent.FutureTask.run(FutureTask.java:266)
>> [rt.jar:1.8.0_111]
>> at 
>> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
>> [rt.jar:1.8.0_111]
>> at 
>> 

Re: [ovirt-users] Importing VM's from VMware

[Yaniv Kaul]

On Oct 26, 2016 11:51 PM, "Bryan Sockel"  wrote:
>
> The process finished successfully, took about 4 hours per vm, not sure if
this is typical or not, but this being our first test run i was afraid that
it may have stopped and was unsure.  I will check the VDSM.log file on the
next test migration i do.

What was the size of the disks and what was the network interfaces speed on
both sides?
What is the storage performance on both?
Y.

>
> Thanks
>
>>
>> -Original Message-
>> From: Tomáš Golembiovský 
>> To: "Bryan Sockel" 
>> Cc: "users@ovirt.org" 
>> Date: Tue, 25 Oct 2016 00:36:50 +0200
>> Subject: Re: [ovirt-users] Importing VM's from VMware
>>
>> Hi,
>>
>> during the import process engine shows status like "Initializing",
>> "Copying disk x/y" and "Finishing" next to the VM.
>>
>> Could you check in the engine status of the import task? Did it finish
>> successfully or with an error? You can also check the vdsm.log for any
>> errors.
>>
>>
>> Best regards,
>>
>> Tomas
>>
>>
>> On Mon, 24 Oct 2016 13:42:44 -0500
>> "Bryan Sockel"  wrote:
>>
>> > Hi,
>> >
>> > We are making our first attempt at importing VM's from VMWare, i am
able to
>> > connect to our VMWare environment and i can choose a VM to import and
i am
>> > able to start the process.  A VM is created, the disk is created as
well
>> > then the task completes in ovirt.  Looking at my virtual machines, the
vm
>> > shows up with a red arrow and a lock next to it.
>> >
>> > After that there are no tasks that appear.  Is there a way to monitor
the
>> > import process of the VM?
>> >
>> > Currently running Ovirt 4.04.
>> >
>> > Thanks
>>
>>
>> --
>> Tomáš Golembiovský 
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Upgrading oVirt 3.6 with existing HTTPS certificate signed by custom CA to oVirt 4

[Beckman, Daniel]

We have oVirt 3.6.7 and I am preparing to upgrade to 4.0.4 release. I read the 
release notes (https://www.ovirt.org/release/4.0.4/) and noted comment #4 under 
“Install / Upgrade from previous version”:

If you are using HTTPS certificate signed by custom certificate authority, 
please take a look at https://bugzilla.redhat.com/1336838 for steps which need 
to be done after migration to 4.0. Also please consult 
https://bugzilla.redhat.com/1313379 how to setup this custom CA for use with 
virt-viewer clients.

So I referred to the first bugzilla 
(https://bugzilla.redhat.com/show_bug.cgi?id=1336838), where it states as 
follows:

If customer wants to use custom HTTPS certificate signed by different CA, then 
he has to perform following steps:

1. Install custom CA (that signed HTTPS certificate) into host wide trustore 
(more info can be found in update-ca-trust man page)

2. Configure HTTPS certificate in Apache (this step is same as in previous 
versions)

3. Create new configuration file (for example 
/etc/ovirt-engine/engine.conf.d/99-custom-truststore.conf) with following 
content:
ENGINE_HTTPS_PKI_TRUST_STORE="/etc/pki/java/cacerts" 
ENGINE_HTTPS_PKI_TRUST_STORE_PASSWORD=""

4. Restart ovirt-engine service

I find it humorous that step # 1 suggests reading the “man page” which is only 
slightly better than suggesting to “google” it.

Has anyone using a custom CA for their HTTPS certificate successfully upgraded 
to oVirt 4? If so could you share your detailed steps? Or can anyone point me 
to an actual example of this procedure? I’m a little nervous about the upgrade 
if you can’t already tell.

Thanks,
Daniel
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Importing VM's from VMware

[Bryan Sockel]

The process finished successfully, took about 4 hours per vm, not sure if 
this is typical or not, but this being our first test run i was afraid that 
it may have stopped and was unsure.  I will check the VDSM.log file on the 
next test migration i do.

​​​Thanks

-Original Message-
From: Tomáš Golembiovský 
To: "Bryan Sockel" 
Cc: "users@ovirt.org" 
Date: Tue, 25 Oct 2016 00:36:50 +0200
Subject: Re: [ovirt-users] Importing VM's from VMware

Hi,

during the import process engine shows status like "Initializing",
"Copying disk x/y" and "Finishing" next to the VM.

Could you check in the engine status of the import task? Did it finish
successfully or with an error? You can also check the vdsm.log for any
errors.


Best regards,

Tomas


On Mon, 24 Oct 2016 13:42:44 -0500
"Bryan Sockel"  wrote:

> Hi,
>
> We are making our first attempt at importing VM's from VMWare, i am able 
to
> connect to our VMWare environment and i can choose a VM to import and i am
> able to start the process.  A VM is created, the disk is created as well
> then the task completes in ovirt.  Looking at my virtual machines, the vm
> shows up with a red arrow and a lock next to it.  
>
> After that there are no tasks that appear.  Is there a way to monitor the
> import process of the VM?  
>
> Currently running Ovirt 4.04.
>
> Thanks


--
Tomáš Golembiovský ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] ovirt-engine, ovirt-engine base O.S, hypervisor base O.S update(s)

[Sandvik Agustin]

hi user,

I'm planning to update my virutalization and to fix some system
incompatibility.

we've been using this kind of setup since 2014 and as of now we're not
having some problem.

the system incompatibility that I mention is that, at first my ovirt-engine
base os is CentOS 6.7 and my ovirt-engine first version was 3.5 I believe
that version 3.5 supports adding hosts with the base O.S of Centos 6.x,
then we decided to update the ovirt-engine version from 3.5 to 3.6, then i
begun having problem adding hosts with base O.S of CentOS 6.x, then tried
to google it, I found out that ovirt-engine 3.6 does not support adding
hosts with base O.S of EL6.x, just to add the new host, I decided to change
the base O.S of it from CentOS 6.7 to CentOS 7, i've successfully added it
to the ovirt-engine but on the different Cluster, and because of this, some
features of ovirt-engine 3.6 was unable to use. By the way, my setup here
is self-hosted "ovirt-engine".

now my question is
1. will it still work if I restore my current ovirt-engine backup with base
of CentOS 6.7 to a new ovirt-engine base O.S CentOS 7 without messing with
the Domain data storage. LDAP and VM(s)?

TIA
Sandvik
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

[Beckman, Daniel]

That’s it! Some background: within our IT department most of us have a regular 
user account and an administrative account. For the later account type, the UPN 
and SAM account name happen to be the same (e.g. jdoead...@example.com) whereas 
for regular users UPN is something like john@example..com.  When I used the 
UPN name (e.g. john.doe) the login worked fine. 

We can work with that. But is there a way to change it to using SAM account 
name? 

Thanks,
Daniel 

On 10/26/16, 12:58 PM, "Ondra Machacek"  wrote:

On 10/26/2016 06:31 PM, Beckman, Daniel wrote:
> I have been updating our oVirt 3.6 (3.6.7.5-1) environment in
> preparation for upgrading to oVirt 4.
>
>
>
> We had been using the legacy AD connection (via engine-manage-domains),
> and since that’s no longer available in oVirt 4, this was a priorty. (I
> put this off as long as I could – I found the new method a step back in
> ease of use.)
>
>
>
> So following the documentation I setup
> ‘ovirt-engine-extension-aaa-ldap’, connecting to the same Active
> Directory forest. It seemed to work; I was able to look up users. But
> none of the existing AD users that we had been using in oVirt were able
> to log in to the admin or user portal, using the new extension. The
> error is “General command validation failure.”. (Whereas if you enter a
> wrong password, you get the expected wrong password error.)* *Here’s
> what /var/log/ovirt-engine/engine.log shows for “myuser”:
>
> {Extkey[name=EXTENSION_INVOKE_CONTEXT;type=class
> 
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_INVOKE_CONTEXT[886d2ebb-312a-49ae-9cc3-e1f849834b7d];]={Extkey[name=EXTENSION_INTERFACE_VERSION_MAX;type=class
> 
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-4901-8ee9-df362446e3e7];]=0,
> Extkey[name=EXTENSION_LICENSE;type=class
> 
java.lang.String;uuid=EXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a4c18];]=ASL
> 2.0, Extkey[name=EXTENSION_NOTES;type=class
> 
java.lang.String;uuid=EXTENSION_NOTES[2da5ad7e-185a-4584-aaff-97f66978e4ea];]=Display
> name: ovirt-engine-extension-aaa-ldap-1.1.4-1.el7,
> Extkey[name=EXTENSION_HOME_URL;type=class
> 
java.lang.String;uuid=EXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e18304];]=http://www.ovirt.org,
> Extkey[name=EXTENSION_LOCALE;type=class
> 
java.lang.String;uuid=EXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778bb29];]=en_US,
> Extkey[name=EXTENSION_NAME;type=class
> 
java.lang.String;uuid=EXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a103184];]=ovirt-engine-extension-aaa-ldap.authz,
> Extkey[name=EXTENSION_INTERFACE_VERSION_MIN;type=class
> 
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497b-a1d7-d961b9d2ce0b];]=0,
> Extkey[name=EXTENSION_CONFIGURATION;type=class
> 
java.util.Properties;uuid=EXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4ae-5068a226b0fc];]=***,
> Extkey[name=EXTENSION_AUTHOR;type=class
> 
java.lang.String;uuid=EXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7fbcc];]=The
> oVirt Project, Extkey[name=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=class
> 
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a1-a6e3-014e247595f5];]=50,
> Extkey[name=EXTENSION_INSTANCE_NAME;type=class
> 
java.lang.String;uuid=EXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-8674327f011b];]=ingramcontent.com,
> Extkey[name=EXTENSION_BUILD_INTERFACE_VERSION;type=class
> 
java.lang.Integer;uuid=EXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-46f8-aed3-56a4747a8ab7];]=0,
> Extkey[name=EXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=interface
> 
java.util.Collection;uuid=EXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa1-73ff-4204-9f9b-ebff01e35263];]=[],
> Extkey[name=EXTENSION_GLOBAL_CONTEXT;type=class
> 
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_GLOBAL_CONTEXT[9799e72f-7af6-4cf1-bf08-297bc8903676];]=*skip*,
> Extkey[name=EXTENSION_VERSION;type=class
> 
java.lang.String;uuid=EXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779ce68c];]=1.1.4,
> Extkey[name=AAA_AUTHZ_AVAILABLE_NAMESPACES;type=interface
> 
java.util.Collection;uuid=AAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-486a-bd35-0a272b45a711];]=[DC=ingramcontent,DC=com],
> Extkey[name=EXTENSION_MANAGER_TRACE_LOG;type=interface
> 
org.slf4j.Logger;uuid=EXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-9695-918a3197ad83];]=org.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.extensions.mgr.ExtensionsManager.trace.ovirt-engine-extension-aaa-ldap.authz.ingramcontent.com),
> Extkey[name=EXTENSION_PROVIDES;type=interface
> 
java.util.Collection;uuid=EXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e275087de91];]=[org.ovirt.engine.api.extensions.aaa.Authz],
> Extkey[name=EXTENSION_CONFIGURATION_FILE;type=class
> 

[ovirt-users] migrating via pivotting the storage domain between instances of Manager

[Kenneth Bingham]

Is it possible to "pivot" up or down guests from one instance of Manager to
another instance of Manager by detaching the data storage domain from the
source Manager's data center and attaching it to the destination Manager's
data center? I tried this with a block type storage domain, but there are
no storage domains found when I do "import domain" in the destination
Manager.

If I do "import domain" on the source Manager and choose the same oVirt
host to perform the import then the detached storage domain is able to be
imported. If I re-attach the storage domain to the source Manager's data
center the unregistered guests are available for import. Why does this
require that the oVirt host performing the import be the same host that had
formerly mounted the domain? Or, is it that the host is still recognized as
enrolled in the DC that had created the unregistered guests on the detached
storage domain?

What if, instead of detaching the storage domain from the source Manager's
data center, I shut down all guests and put the oVirt host in maintenance
mode and enroll that same oVirt host in the destination Manager's data
center, then would it be possible to import the detached storage domain and
import the unregistered guests and templates stored there?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

[Ondra Machacek]

On 10/26/2016 06:31 PM, Beckman, Daniel wrote:

I have been updating our oVirt 3.6 (3.6.7.5-1) environment in
preparation for upgrading to oVirt 4.



We had been using the legacy AD connection (via engine-manage-domains),
and since that’s no longer available in oVirt 4, this was a priorty. (I
put this off as long as I could – I found the new method a step back in
ease of use.)



So following the documentation I setup
‘ovirt-engine-extension-aaa-ldap’, connecting to the same Active
Directory forest. It seemed to work; I was able to look up users. But
none of the existing AD users that we had been using in oVirt were able
to log in to the admin or user portal, using the new extension. The
error is “General command validation failure.”. (Whereas if you enter a
wrong password, you get the expected wrong password error.)* *Here’s
what /var/log/ovirt-engine/engine.log shows for “myuser”:

{Extkey[name=EXTENSION_INVOKE_CONTEXT;type=class
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_INVOKE_CONTEXT[886d2ebb-312a-49ae-9cc3-e1f849834b7d];]={Extkey[name=EXTENSION_INTERFACE_VERSION_MAX;type=class
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-4901-8ee9-df362446e3e7];]=0,
Extkey[name=EXTENSION_LICENSE;type=class
java.lang.String;uuid=EXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a4c18];]=ASL
2.0, Extkey[name=EXTENSION_NOTES;type=class
java.lang.String;uuid=EXTENSION_NOTES[2da5ad7e-185a-4584-aaff-97f66978e4ea];]=Display
name: ovirt-engine-extension-aaa-ldap-1.1.4-1.el7,
Extkey[name=EXTENSION_HOME_URL;type=class
java.lang.String;uuid=EXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e18304];]=http://www.ovirt.org,
Extkey[name=EXTENSION_LOCALE;type=class
java.lang.String;uuid=EXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778bb29];]=en_US,
Extkey[name=EXTENSION_NAME;type=class
java.lang.String;uuid=EXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a103184];]=ovirt-engine-extension-aaa-ldap.authz,
Extkey[name=EXTENSION_INTERFACE_VERSION_MIN;type=class
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497b-a1d7-d961b9d2ce0b];]=0,
Extkey[name=EXTENSION_CONFIGURATION;type=class
java.util.Properties;uuid=EXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4ae-5068a226b0fc];]=***,
Extkey[name=EXTENSION_AUTHOR;type=class
java.lang.String;uuid=EXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7fbcc];]=The
oVirt Project, Extkey[name=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=class
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a1-a6e3-014e247595f5];]=50,
Extkey[name=EXTENSION_INSTANCE_NAME;type=class
java.lang.String;uuid=EXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-8674327f011b];]=ingramcontent.com,
Extkey[name=EXTENSION_BUILD_INTERFACE_VERSION;type=class
java.lang.Integer;uuid=EXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-46f8-aed3-56a4747a8ab7];]=0,
Extkey[name=EXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=interface
java.util.Collection;uuid=EXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa1-73ff-4204-9f9b-ebff01e35263];]=[],
Extkey[name=EXTENSION_GLOBAL_CONTEXT;type=class
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_GLOBAL_CONTEXT[9799e72f-7af6-4cf1-bf08-297bc8903676];]=*skip*,
Extkey[name=EXTENSION_VERSION;type=class
java.lang.String;uuid=EXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779ce68c];]=1.1.4,
Extkey[name=AAA_AUTHZ_AVAILABLE_NAMESPACES;type=interface
java.util.Collection;uuid=AAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-486a-bd35-0a272b45a711];]=[DC=ingramcontent,DC=com],
Extkey[name=EXTENSION_MANAGER_TRACE_LOG;type=interface
org.slf4j.Logger;uuid=EXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-9695-918a3197ad83];]=org.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.extensions.mgr.ExtensionsManager.trace.ovirt-engine-extension-aaa-ldap.authz.ingramcontent.com),
Extkey[name=EXTENSION_PROVIDES;type=interface
java.util.Collection;uuid=EXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e275087de91];]=[org.ovirt.engine.api.extensions.aaa.Authz],
Extkey[name=EXTENSION_CONFIGURATION_FILE;type=class
java.lang.String;uuid=EXTENSION_CONFIGURATION_FILE[4fb0ffd3-983c-4f3f-98ff-9660bd67af6a];]=/etc/ovirt-engine/extensions.d/INGRAMCONTENT.COM.properties},
Extkey[name=AAA_AUTHZ_QUERY_FLAGS;type=class
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_FLAGS[97d226e9-8d87-49a0-9a7f-af689320907b];]=3,
Extkey[name=AAA_AUTHZ_PRINCIPAL;type=class
java.lang.String;uuid=AAA_AUTHZ_PRINCIPAL[a3c1d5ca-f1ea-131c-86ae-a1ecbcadd6b7];]=myu...@ingramcontent.com,
Extkey[name=EXTENSION_INVOKE_COMMAND;type=class
org.ovirt.engine.api.extensions.ExtUUID;uuid=EXTENSION_INVOKE_COMMAND[485778ab-bede-4f1a-b823-77b262a2f28d];]=AAA_AUTHZ_FETCH_PRINCIPAL_RECORD[5a5bf9bb-9336-4376-a823-26efe1ba26df],
Extkey[name=AAA_AUTHN_AUTH_RECORD;type=class
org.ovirt.engine.api.extensions.ExtMap;uuid=AAA_AUTHN_AUTH_RECORD[e9462168-b53b-44ac-9af5-f25e1697173e];]={Extkey[name=AAA_AUTHN_AUTH_RECORD_PRINCIPAL;type=class

Re: [ovirt-users] Group permissions at cluster level

[Ondra Machacek]

On 10/26/2016 04:49 PM, Woodward, Paul wrote:

Hi,



This could be a bug or a configuration issue, I’m not too sure yet. At
the moment if I apply group permissions using the PowerUserRole to the
cluster itself, then any VMs created in the user portal by users in that
group don’t get the UserVmManager role applied correctly. The user,
authorization provider and namespace fields are all blank meaning that
VM is visible to all users on the platform.


Thanks for the report. It's indeed a bug. Can you please report it in 
bugzilla here:


 https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine

Thank you very much.





If you do this with individual users’ permissions though, it works as
expected and they get the UserVmManager role assigned to their username
on the VM.



Thanks,

Paul


NHSGG Disclaimer

The information contained within this e-mail and in any attachment is
confidential and may be privileged. If you are not the intended
recipient, please destroy this message, delete any copies held on your
systems and notify the sender immediately; you should not retain, copy
or use this e-mail for any purpose, nor disclose all or any part of its
content to any other person.

All messages passing through this gateway are checked for viruses, but
we strongly recommend that you check for viruses using your own virus
scanner as NHS Greater Glasgow & Clyde will not take responsibility for
any damage caused as a result of virus infection.

**



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt and active directory integration

[Ondra Machacek]

On 10/26/2016 12:01 PM, nicola.gentile.to wrote:

Hi,
I would like to submit a problem with active directory authentication.
Let me make an introduction.
Actually my infrastructure consists in 1 manager and 2 nodes (version
4.0.4).
The active directory forest consists in many subdomains.
In the active directory forest there are 2 type of accounts:
-1- normal users, this account is similar to name.surn...@domain.it
-2- particular users, this account is similar to s123...@subdomain.domain.it

Important note: the subdomain of the account type 2 is an alias domain
for example:

s123...@subdomain.domain.it is an alias of s123...@domain.it

When I do login from user portal:

- with normal users I login correctly and I can start the vm without problem
- with particular users I login correctly but I can not start the vm
although I have permissions. To solve this problem I must insert the
account in the db of ovirt from administration portal in the users tab

I noticed that, with a particular users (s123...@subdomain.domain.it),
the ovirt infrastructure does not automatically insert this account in
the own db.


We do not insert those users in database only in case they are member
of group which is added in system. But once you log in with this user
it should inherit all permissions of the group which is member of.

So can you please double check the group which those users are members
has appropriate permissions to start the VM?

You can also see what groups are resolved by oVirt engine to specific 
user by running following command:


 $ ovirt-engine-extensions-tool aaa login-user 
--user-name=s123...@subdomain.domain.it --profile=domain.it


You could also hit this bug:

 https://bugzilla.redhat.com/show_bug.cgi?id=1336707

What's the groups scopes?



Also the subdomain.domain.it is not in the list of the subdomains of the
forest, perhaps it is for this reason that does not work properly.

I deduced that is an active directory problem (that in not resolvable
for the complexity of the AD infrastructure), I ask you if exist a
script for insert of many accounts at one time. Something like:

script.sh < list-users.txt


Something like this[1] should work for you. I didn't test it. Note it 
uses oVirt Python SDK version4. Which can be downloaded from pip as follows:


 pip install ovirt-engine-sdk-python


But I wouldn't do it and would rather find the root cause as I think 
this is issue on oVirt side.


[1] https://paste.fedoraproject.org/461499/



where the file lists-users.txt consists of a sequential list of accounts
like this:

s000...@subdomain.polito.it
s000...@subdomain.polito.it
s000...@subdomain.polito.it
s000...@subdomain.polito.it

Thank you very much for your help

Nicola



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt 3.6 Migrated from Legacy AD Authentication - Previously Used AD Users Can't Log In

[Beckman, Daniel]

I have been updating our oVirt 3.6 (3.6.7.5-1) environment in preparation for 
upgrading to oVirt 4.

We had been using the legacy AD connection (via engine-manage-domains), and 
since that’s no longer available in oVirt 4, this was a priorty. (I put this 
off as long as I could – I found the new method a step back in ease of use.)

So following the documentation I setup ‘ovirt-engine-extension-aaa-ldap’, 
connecting to the same Active Directory forest. It seemed to work; I was able 
to look up users. But none of the existing AD users that we had been using in 
oVirt were able to log in to the admin or user portal, using the new extension. 
The error is “General command validation failure.”. (Whereas if you enter a 
wrong password, you get the expected wrong password error.)  Here’s what 
/var/log/ovirt-engine/engine.log shows for “myuser”:
{Extkey[name=EXTENSION_INVOKE_CONTEXT;type=class 
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_INVOKE_CONTEXT[886d2ebb-312a-49ae-9cc3-e1f849834b7d];]={Extkey[name=EXTENSION_INTERFACE_VERSION_MAX;type=class
 
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-4901-8ee9-df362446e3e7];]=0,
 Extkey[name=EXTENSION_LICENSE;type=class 
java.lang.String;uuid=EXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a4c18];]=ASL
 2.0, Extkey[name=EXTENSION_NOTES;type=class 
java.lang.String;uuid=EXTENSION_NOTES[2da5ad7e-185a-4584-aaff-97f66978e4ea];]=Display
 name: ovirt-engine-extension-aaa-ldap-1.1.4-1.el7, 
Extkey[name=EXTENSION_HOME_URL;type=class 
java.lang.String;uuid=EXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e18304];]=http://www.ovirt.org,
 Extkey[name=EXTENSION_LOCALE;type=class 
java.lang.String;uuid=EXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778bb29];]=en_US,
 Extkey[name=EXTENSION_NAME;type=class 
java.lang.String;uuid=EXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a103184];]=ovirt-engine-extension-aaa-ldap.authz,
 Extkey[name=EXTENSION_INTERFACE_VERSION_MIN;type=class 
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497b-a1d7-d961b9d2ce0b];]=0,
 Extkey[name=EXTENSION_CONFIGURATION;type=class 
java.util.Properties;uuid=EXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4ae-5068a226b0fc];]=***,
 Extkey[name=EXTENSION_AUTHOR;type=class 
java.lang.String;uuid=EXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7fbcc];]=The
 oVirt Project, Extkey[name=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=class 
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a1-a6e3-014e247595f5];]=50,
 Extkey[name=EXTENSION_INSTANCE_NAME;type=class 
java.lang.String;uuid=EXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-8674327f011b];]=ingramcontent.com,
 Extkey[name=EXTENSION_BUILD_INTERFACE_VERSION;type=class 
java.lang.Integer;uuid=EXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-46f8-aed3-56a4747a8ab7];]=0,
 Extkey[name=EXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=interface 
java.util.Collection;uuid=EXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa1-73ff-4204-9f9b-ebff01e35263];]=[],
 Extkey[name=EXTENSION_GLOBAL_CONTEXT;type=class 
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_GLOBAL_CONTEXT[9799e72f-7af6-4cf1-bf08-297bc8903676];]=*skip*,
 Extkey[name=EXTENSION_VERSION;type=class 
java.lang.String;uuid=EXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779ce68c];]=1.1.4,
 Extkey[name=AAA_AUTHZ_AVAILABLE_NAMESPACES;type=interface 
java.util.Collection;uuid=AAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-486a-bd35-0a272b45a711];]=[DC=ingramcontent,DC=com],
 Extkey[name=EXTENSION_MANAGER_TRACE_LOG;type=interface 
org.slf4j.Logger;uuid=EXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-9695-918a3197ad83];]=org.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.extensions.mgr.ExtensionsManager.trace.ovirt-engine-extension-aaa-ldap.authz.ingramcontent.com),
 Extkey[name=EXTENSION_PROVIDES;type=interface 
java.util.Collection;uuid=EXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e275087de91];]=[org.ovirt.engine.api.extensions.aaa.Authz],
 Extkey[name=EXTENSION_CONFIGURATION_FILE;type=class 
java.lang.String;uuid=EXTENSION_CONFIGURATION_FILE[4fb0ffd3-983c-4f3f-98ff-9660bd67af6a];]=/etc/ovirt-engine/extensions.d/INGRAMCONTENT.COM.properties},
 Extkey[name=AAA_AUTHZ_QUERY_FLAGS;type=class 
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_FLAGS[97d226e9-8d87-49a0-9a7f-af689320907b];]=3,
 Extkey[name=AAA_AUTHZ_PRINCIPAL;type=class 
java.lang.String;uuid=AAA_AUTHZ_PRINCIPAL[a3c1d5ca-f1ea-131c-86ae-a1ecbcadd6b7];]=myu...@ingramcontent.com,
 Extkey[name=EXTENSION_INVOKE_COMMAND;type=class 
org.ovirt.engine.api.extensions.ExtUUID;uuid=EXTENSION_INVOKE_COMMAND[485778ab-bede-4f1a-b823-77b262a2f28d];]=AAA_AUTHZ_FETCH_PRINCIPAL_RECORD[5a5bf9bb-9336-4376-a823-26efe1ba26df],
 Extkey[name=AAA_AUTHN_AUTH_RECORD;type=class 
org.ovirt.engine.api.extensions.ExtMap;uuid=AAA_AUTHN_AUTH_RECORD[e9462168-b53b-44ac-9af5-f25e1697173e];]={Extkey[name=AAA_AUTHN_AUTH_RECORD_PRINCIPAL;type=class
 

[ovirt-users] Kill a failed VM import

[Chris Cowley]

Hello all

I have just imported physical machine into my export datastore using
virt-p2v. While I was importing it, my hosted-engine died (VM went into
paused state) during the disk-copy stage.

Now, that half-imported VM is in the status "image locked" and I am un able
to do anything with it. The disk image does not seem to be in my master
data store so I think I can safely delete the VM and re-import it. However,
that is not available in the web GUI. How can I work around that and force
the deletion?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Group permissions at cluster level

[Woodward, Paul]

Hi,

This could be a bug or a configuration issue, I'm not too sure yet. At the 
moment if I apply group permissions using the PowerUserRole to the cluster 
itself, then any VMs created in the user portal by users in that group don't 
get the UserVmManager role applied correctly. The user, authorization provider 
and namespace fields are all blank meaning that VM is visible to all users on 
the platform.

If you do this with individual users' permissions though, it works as expected 
and they get the UserVmManager role assigned to their username on the VM.

Thanks,
Paul

NHSGG Disclaimer

The information contained within this e-mail and in any attachment is
confidential and may be privileged. If you are not the intended
recipient, please destroy this message, delete any copies held on your
systems and notify the sender immediately; you should not retain, copy
or use this e-mail for any purpose, nor disclose all or any part of its
content to any other person.

All messages passing through this gateway are checked for viruses, but
we strongly recommend that you check for viruses using your own virus
scanner as NHS Greater Glasgow & Clyde will not take responsibility for
any damage caused as a result of virus infection.

** 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Node iso downoad

[Douglas Schilling Landgraf]

Hi Anantha,

On 10/26/2016 09:41 AM, Anantha Raghava wrote:

Hello Kasturi,

I download and installed. But not getting any option to setup the engine
information.


That's correct, in 4.0 we register the host from engine.


When I try to add host from engine, it is reporting as the
target is a hypervisor host and terminating the setup. How do I proceed
further?


If you have the host up, you need to setup your storage, create disks 
and finally the virtual machines.


In case you have any problem during the registration/deploy of host, in 
engine, we have the events window (below window) with the log of deploy. 
The full logs are also in engine machine: 
/var/log/ovirt-engine/host-deploy/*.


I hope that helps.



--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.

On Wednesday 26 October 2016 06:50 PM, knarra wrote:

On 10/26/2016 06:17 PM, Anantha Raghava wrote:


Hi,

Where do we download a working oVirt Node ISO? Not finding the
correct link.

--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Hi,

you can download ovirt Node iso  from the link
http://plain.resources.ovirt.org/pub/ovirt-4.0/iso/

Thanks

kasturi





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Hosted-Engine-HA-Simulation-Error

[Martin Sivak]

Hi Anzar,

the "is not a hosted engine host" part usually means the hosted engine
score of that host is zero. You can check the score in the General subtab
for the host.

The reason for the score being zero might be that the engine hasn't noticed
the deployment yet or something failed on the host. You can check that by
logging into any hosted engine host and issuing hosted-engine --vm-status
command. That will tell you details about the status of all hosts.

--
Martin Sivak
SLA / oVirt


On Wed, Oct 26, 2016 at 3:48 PM, Anzar Sainudeen 
wrote:

> Dear Yanir,
>
>
>
> Thank you for your fast reply.
>
> My current ovirt node version is 4.0.3. Please let me know the next which
> version release will resolve the error ‘The host hosted_engine_2 did not
> satisfy internal filter HA because it is not a Hosted Engine host..”
>
>
>
> Second Issues(vm not available)
>
> I have setup hosted-engine setup in first host1 successfully and on the
> second host we use # hosted-engine --deploy --config-append=answers.conf
>
> My shared storage type is FC and select the same location chose for the
> host-2 install the vm sucessfull.
>
> But in the engine àunder-àhost , the second hosted-engine vm is not
> visbilbe.
>
>
>
> I will attached some screen short, please support and advise we are in
> wright path….to complete our R
>
>
>
>
> *Anzar SainudeenDatacenter **Infrastructure*
> * Incharge**IT Infrastructure Division*
>
> *Tel: +971 6 7431333 Ext: 1303 <%2B971%206%207431333%20Ext%3A%201303>Mob:
> +971 55 8633699 <%2B971%2055%208633699> *
>
> *Email:  an...@it.thumbay.com  Web: www.thumbay.com
> *
>
> [image: Description:
> https://docs.google.com/uc?export=download=0ByrcJpYbMetaVExqQzBrVldnVkU=0ByrcJpYbMetaYWNlWlJuc2hCdGZiR0swM25wdzhwODBBeXk0PQ]
>
> *DUBAI I SHARJAH I AJMAN I UMM AL QUWAIN I RAS AL KHAIMAH I FUJAIRAH I
> INDIA*
>
>
>
> Disclaimer: This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee, you are
> hereby notified that disclosing, copying, distributing or taking any action
> in reliance on the contents of this e-mail is strictly prohibited. Please
> notify the sender immediately by e-mail if you have received this e-mail by
> mistake, and delete this material. Thumbay Group accepts no liability for
> errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission.
>
>
>
>
>
>
>
>
>
>
>
> *From:* Yanir Quinn [mailto:yqu...@redhat.com]
> *Sent:* Wednesday, October 26, 2016 3:50 PM
> *To:* Anzar Sainudeen
> *Cc:* users
> *Subject:* Re: [ovirt-users] Hosted-Engine-HA-Simulation-Error
>
>
>
> Hi Anzar ,
>
> There is a bug for this misleading second log message :
> https://bugzilla.redhat.com/show_bug.cgi?id=1314377
> which is being handled for the next version.
>
> since the second host is not available as a virtual machine a proper
> message should reflect that instead of the current one you get now.
>
> Thanks
>
> Yanir Quinn
>
>
>
> On Wed, Oct 26, 2016 at 2:32 PM, Anzar Sainudeen 
> wrote:
>
> Dear Team,
>
>
>
> I am getting the below error during the hosted-Engine HA testing.
>
>
>
> Error while executing action:
>
> 1. HostedEngine:
>
>- Cannot migrate VM. There is no host that satisfies current
>scheduling constraints. See below for details:
>- The host hosted_engine_1 did not satisfy internal filter Migration
>because it currently hosts the VM..
>- The host hosted_engine_2 did not satisfy internal filter HA because
>it is not a Hosted Engine host..
>
>
>
> 2. Second is hosted_engine_2 is not available as a virtual machine.
>
>
>
>
>
>
>
>
>
>
>
>
>
> *Anzar SainudeenDatacenter Infrastructure InchargeIT Infrastructure
> DivisionTel: +971 6 7431333 Ext: 1303
> <%2B971%206%207431333%20Ext%3A%201303>Mob: +971 55 8633699
> <%2B971%2055%208633699> *
>
> *Email:  an...@it.thumbay.com  Web: www.thumbay.com
> *
>
> [image: Description:
> https://docs.google.com/uc?export=download=0ByrcJpYbMetaVExqQzBrVldnVkU=0ByrcJpYbMetaYWNlWlJuc2hCdGZiR0swM25wdzhwODBBeXk0PQ]
>
> *DUBAI I SHARJAH I AJMAN I UMM AL QUWAIN I RAS AL KHAIMAH I FUJAIRAH I
> INDIA*
>
>
>
> Disclaimer: This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee, you are
> hereby notified that disclosing, copying, distributing or taking any action
> in reliance on the contents of this e-mail is strictly prohibited. Please
> notify the sender immediately by e-mail if you have received this e-mail by
> mistake, and delete this material. Thumbay Group accepts no liability for
> errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission.
>
>
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> 

Re: [ovirt-users] oVirt Node iso downoad

[Anantha Raghava]

Hello Kasturi,

I download and installed. But not getting any option to setup the engine 
information. When I try to add host from engine, it is reporting as the 
target is a hypervisor host and terminating the setup. How do I proceed 
further?


--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.

On Wednesday 26 October 2016 06:50 PM, knarra wrote:

On 10/26/2016 06:17 PM, Anantha Raghava wrote:


Hi,

Where do we download a working oVirt Node ISO? Not finding the 
correct link.


--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Hi,

you can download ovirt Node iso  from the link 
http://plain.resources.ovirt.org/pub/ovirt-4.0/iso/


Thanks

kasturi



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Node iso downoad

[knarra]

On 10/26/2016 06:17 PM, Anantha Raghava wrote:


Hi,

Where do we download a working oVirt Node ISO? Not finding the correct 
link.


--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Hi,

you can download ovirt Node iso  from the link 
http://plain.resources.ovirt.org/pub/ovirt-4.0/iso/


Thanks

kasturi

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Node iso downoad

[Anantha Raghava]

Hi,

Where do we download a working oVirt Node ISO? Not finding the correct link.

--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


Do not print this e-mail unless required. Save Paper & trees.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Using Local Harddisks on the Host for Storage Domains

[Tom Gamull]

I’ve done the same. You may get some shutdown issues with this approach on 
sanlock so if this is more of a home lab and you shutdown a lot sometimes the 
following helps

systemctl stop ovirt-ha-agent ovirt-ha-broker
systemctl stop vdsmd
systemctl stop sanlock
systemctl stop nfs
systemctl power off

The sanlock will take a while
Sometimes I’ve also had to manually mount the volumes under /rhev/…

YMMV

Tom

> On Oct 25, 2016, at 11:29 PM, Anantha Raghava  
> wrote:
> 
> Thanks Julian.
> 
> --
> 
> Thanks & Regards,
> 
> Anantha Raghava
> eXza Technology Consulting & Services
> 
> Do not print this e-mail unless required. Save Paper & trees.
> On Wednesday 26 October 2016 08:35 AM, Julian De Marchi wrote:
>> Hey, 
>> 
>> On 26/10/16 12:51 pm, Anantha Raghava wrote: 
>>> Hello to all, 
>>> 
>>> Can we make use of large hard disk drives on the Hosts for shared 
>>> storage domains? 
>> 
>> Use NFS on each host to export the local disk to your cluster. Ensure this 
>> is remembered, as when you want to reboot a specific node, you have to put 
>> the storage into maintenance as well. 
>> 
>> I also like to pin each VM using the storage to the node the NFS export 
>> lives on. 
>> 
>> --julian 
>> ___ 
>> Users mailing list 
>> Users@ovirt.org  
>> http://lists.ovirt.org/mailman/listinfo/users 
>>  
> 
> ___
> Users mailing list
> Users@ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users 
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Hosted-Engine-HA-Simulation-Error

[Yanir Quinn]

Hi Anzar ,
There is a bug for this misleading second log message :
https://bugzilla.redhat.com/show_bug.cgi?id=1314377
which is being handled for the next version.

since the second host is not available as a virtual machine a proper
message should reflect that instead of the current one you get now.

Thanks
Yanir Quinn

On Wed, Oct 26, 2016 at 2:32 PM, Anzar Sainudeen 
wrote:

> Dear Team,
>
>
>
> I am getting the below error during the hosted-Engine HA testing.
>
>
>
> Error while executing action:
>
> 1. HostedEngine:
>
>- Cannot migrate VM. There is no host that satisfies current
>scheduling constraints. See below for details:
>- The host hosted_engine_1 did not satisfy internal filter Migration
>because it currently hosts the VM..
>- The host hosted_engine_2 did not satisfy internal filter HA because
>it is not a Hosted Engine host..
>
>
>
> 2. Second is hosted_engine_2 is not available as a virtual machine.
>
>
>
>
>
>
>
>
>
>
> *Anzar SainudeenDatacenter **Infrastructure*
> * Incharge**IT Infrastructure Division*
>
> *Tel: +971 6 7431333 Ext: 1303 <%2B971%206%207431333%20Ext%3A%201303>Mob:
> +971 55 8633699 <%2B971%2055%208633699> *
>
> *Email:  an...@it.thumbay.com  Web: www.thumbay.com
> *
>
> [image: Description:
> https://docs.google.com/uc?export=download=0ByrcJpYbMetaVExqQzBrVldnVkU=0ByrcJpYbMetaYWNlWlJuc2hCdGZiR0swM25wdzhwODBBeXk0PQ]
>
> *DUBAI I SHARJAH I AJMAN I UMM AL QUWAIN I RAS AL KHAIMAH I FUJAIRAH I
> INDIA*
>
>
>
> Disclaimer: This message contains confidential information and is intended
> only for the individual named. If you are not the named addressee, you are
> hereby notified that disclosing, copying, distributing or taking any action
> in reliance on the contents of this e-mail is strictly prohibited. Please
> notify the sender immediately by e-mail if you have received this e-mail by
> mistake, and delete this material. Thumbay Group accepts no liability for
> errors or omissions in the contents of this message, which arise as a
> result of e-mail transmission.
>
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Hosted-Engine-HA-Simulation-Error

[Anzar Sainudeen]

Dear Team,

 

I am getting the below error during the hosted-Engine HA testing.

 

Error while executing action: 

1. HostedEngine:

*   Cannot migrate VM. There is no host that satisfies current
scheduling constraints. See below for details:
*   The host hosted_engine_1 did not satisfy internal filter Migration
because it currently hosts the VM..
*   The host hosted_engine_2 did not satisfy internal filter HA because
it is not a Hosted Engine host..

 

2. Second is hosted_engine_2 is not available as a virtual machine.

 

 

 

 

Anzar Sainudeen
Datacenter Infrastructure Incharge
IT Infrastructure Division
Tel: +971 6 7431333 Ext: 1303
Mob: +971 55 8633699 

Email:    an...@it.thumbay.com Web:
 www.thumbay.com

Description:
https://docs.google.com/uc?export=download=0ByrcJpYbMetaVExqQzBrVldnVkU
evid=0ByrcJpYbMetaYWNlWlJuc2hCdGZiR0swM25wdzhwODBBeXk0PQ

DUBAI I SHARJAH I AJMAN I UMM AL QUWAIN I RAS AL KHAIMAH I FUJAIRAH I INDIA

 

Disclaimer: This message contains confidential information and is intended
only for the individual named. If you are not the named addressee, you are
hereby notified that disclosing, copying, distributing or taking any action
in reliance on the contents of this e-mail is strictly prohibited. Please
notify the sender immediately by e-mail if you have received this e-mail by
mistake, and delete this material. Thumbay Group accepts no liability for
errors or omissions in the contents of this message, which arise as a result
of e-mail transmission.

 

 

 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Ovirt and active directory integration

[nicola.gentile.to]

Hi,
I would like to submit a problem with active directory authentication.
Let me make an introduction.
Actually my infrastructure consists in 1 manager and 2 nodes (version 
4.0.4).

The active directory forest consists in many subdomains.
In the active directory forest there are 2 type of accounts:
-1- normal users, this account is similar to name.surn...@domain.it
-2- particular users, this account is similar to s123...@subdomain.domain.it

Important note: the subdomain of the account type 2 is an alias domain 
for example:


s123...@subdomain.domain.it is an alias of s123...@domain.it

When I do login from user portal:

- with normal users I login correctly and I can start the vm without problem
- with particular users I login correctly but I can not start the vm 
although I have permissions. To solve this problem I must insert the 
account in the db of ovirt from administration portal in the users tab


I noticed that, with a particular users (s123...@subdomain.domain.it), 
the ovirt infrastructure does not automatically insert this account in 
the own db.


Also the subdomain.domain.it is not in the list of the subdomains of the 
forest, perhaps it is for this reason that does not work properly.


I deduced that is an active directory problem (that in not resolvable 
for the complexity of the AD infrastructure), I ask you if exist a 
script for insert of many accounts at one time. Something like:


script.sh < list-users.txt

where the file lists-users.txt consists of a sequential list of accounts 
like this:


s000...@subdomain.polito.it
s000...@subdomain.polito.it
s000...@subdomain.polito.it
s000...@subdomain.polito.it

Thank you very much for your help

Nicola

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] problem with changing cluster compatibility version to 4.0

[Jiří Sléžka]

Hello,


There were one vm with Video Type = CYRRUS and Graphics protocol = SPICE 
(which is probably illegal combination). I have changed it do QXL, SPICE 
(Single PCI is checked) and I was able to change cluster compatibility 
level without problems.



Thanks a lot for advice!

Cheers, Jiri



On 10/25/2016 11:22 AM, Michal Skrivanek wrote:


On 17 Oct 2016, at 15:31, Jiří Sléžka > wrote:


Hello,


I am trying to change cluster compatibility version on one of our 
clusters in our oVirt 4.0.4.4-1.el7.centos installation and I am 
getting this error:



Error while executing action Edit Cluster properties: Internal Engine 
Error



(btw. it would be realy nice make all texts/logs in manager copyable 
in some easy way (simple ctrl+c does not usually work))



In engine.log I found this interesting lines


2016-10-17 15:02:50,415 WARN 
[org.ovirt.engine.core.bll.UpdateVmCommand] (default task-51) 
[2921f45e] Validation of action 'UpdateVm' failed for user user@auth. 
Reasons: 
VAR__ACTION__UPDATE,VAR__TYPE__VM,ACTION_TYPE_FAILED_ILLEGAL_SINGLE_DEVICE_DISPLAY_TYPE
2016-10-17 15:02:50,417 ERROR 
[org.ovirt.engine.core.bll.UpdateVmCommand] (default task-51) 
[2921f45e] Transaction rolled-back for command 
'org.ovirt.engine.core.bll.UpdateVmCommand'.
2016-10-17 15:02:50,417 ERROR 
[org.ovirt.engine.core.bll.UpdateClusterCommand] (default task-51) 
[2921f45e] Transaction rolled-back for command 
'org.ovirt.engine.core.bll.UpdateClusterCommand'.
2016-10-17 15:02:50,421 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(default task-51) [2921f45e] Correlation ID: 11011a71, Call Stack: 
null, Custom Event ID: -1, Message: Failed to update Host cluster 
(User: user@auth)
2016-10-17 15:02:50,422 INFO 
[org.ovirt.engine.core.bll.UpdateClusterCommand] (default task-51) 
[2921f45e] Lock freed to object 'EngineLock:{exclusiveLocks='null', 
sharedLocks='[27161d3d-01ef-4446-aa7a-be5483fdbdf5=, 0323b12f-a515-4759-9bae-cf53336a7756=, 1c6d0ce4-bdcd-4f77-906b-65e4f6415cc3=, 8240ebe8-388c-4a5b-996e-f9e5c77e6375=, e6fab9a1-8f45-4565-8483-363137536334=, 7a5de3e0-ecbd-4ed6-bf98-2e7a45e96027=, 6db37ee2-0ff0-4642-9907-666376b13bda=, dccb8bc9-4760-487b-a2bf-100906a50502=, ea63bea8-f41d-4878-814e-fa62b123a89f=, 885b9641-fda5-4e90-889e-488b858bc37b=, 886a6b86-1bf9-43a0-b7ee-2c43640f8f42=, f4fa4a7e-d0eb-44d8-8ed3-00c2b2705cb4=, 9d4673af-6fba-4b62-bdbf-0864dac65941=, 5ef8560e-bf35-4dfb-8677-3b444fcb9a5d=, 2dfc397f-7230-4517-b143-0bec13b3cd55=, f9d1161f-0d7e-4da5-b45f-1796f87ddab5=, 2b0afe1d-1196-4c99-ab61-43e3764fe1ac=, 08016bb0-e638-431c-a429-0a8f3272632b=, 0a4596ec-fa40-46a1-9d2a-7dcaf0127136=, 9f0bb9a0-374f-41ec-9bec-e35fec4275a1=, 606f3257-7d38-405f-8fc9-b56ff6d36684=, 64976d4e-a64d-453b-8bcb-514c687ae208=, 833ebee2-7e8f-480c-877d-3bbdbf78c7ca=, 7dcabc9d-0d61-4bb0-a532-39655caa900d=, 9eaceca3-4e48-4bde-8cfb-024219d226a9=]'}'



It looks to me like one of our vm has 
"ILLEGAL_SINGLE_DEVICE_DISPLAY_TYPE" set which fail 

Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null

[Jorick Astrego]

On 10/20/2016 03:14 PM, Alexander Wels wrote:
> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
 On 18 Oct 2016, at 15:56, Alexander Wels  wrote:

 On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote:
> Hi,
>
> We have ovirt connected to our freeipa domain. Things work fine
>
> generally, but once in a while I get the following error pop up in the
> ui:
>  Uncaught exception occurred. Please try reloading the page. Details:
>  Exception caught: Exception caught: (TypeError) __gwt$exception:
>  : Cannot read property 'f' of null
>  Please have your administrator check the UI logs
 Could you install the symbol maps assocaited with the obfuscated code so
 we
 can get a readable stack trace. To install the symbol maps please run the
 following command on the machine running the engine (or VM if it is HE).

 yum install ovirt-engine-webadmin-portal-debuginfo

 Please restart the ovirt-engine process with

 systemctl restart ovirt-engine

 after you have installed the symbol maps. Then next time you see the
 message in the UI, the stack trace in the log should be readable and we
 can help you better determine what is causing the problem.
>>> right, that’s likely even easier than what I just wrote;-)
>>>
> The log that goes with it:
>
> 2016-10-17 16:31:32,578 ERROR
> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785
> 2016-10-17 16:31:32,578 ERROR
> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
> (default task-21) [] Uncaught exception: :
> com.google.gwt.event.shared.UmbrellaException: Exception caught:
> Exception caught: (TypeError)
>
>__gwt$exception: : Cannot read property 'f' of null
>
>   at
>
> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at
> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at
> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
> Unknown.P2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
> 23DF C1C8BE1C7FDD91EDAA785.cache.html@117) at
> Unknown.hwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@41) at
> Unknown.twf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@162) at
> Unknown.xwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@14293) at
> Unknown.KVe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@1172) at
> Unknown.yUe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@33) at
> Unknown.viy(@53)at Unknown.Piy(@18587) at
> Unknown.zOr(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@189) at
> Unknown.$to(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@311) at
> Unknown.VBo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@2599) at
> Unknown.mCo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@8942) at
> Unknown.qRn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@116) at
> Unknown.tRn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@568) at
> Unknown.kVn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@74) at
> Unknown.nVn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@25943) at
> Unknown.cUn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@150) at
> Unknown.fUn(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@24587) at
> Unknown.KJe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@21125) at
> Unknown.Izk(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
> F23D FC1C8BE1C7FDD91EDAA785.cache.html@10384) at
>