-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi,
I'm using it, but it's far from the production;( but for manual
cloning the VM it's good.
Righ now there at least 2 bug openend
https://github.com/openbacchus/bacchus/issues/35
Certificate on the https://openbacchus.com is expired, but you co
That should have been covered by the installer really, good to know that
you found the issue though.
On 23 August 2018 at 04:13, Wesley Stewart wrote:
> I'm an idiot, it was selinux
>
> setsebool -P httpd_can_network_connect true
>
> On Wed, Aug 22, 2018, 10:19 PM Wesley Stewart wrote:
>
>> I a
I'm an idiot, it was selinux
setsebool -P httpd_can_network_connect true
On Wed, Aug 22, 2018, 10:19 PM Wesley Stewart wrote:
> I am trying to get Bacchus installed:
> https://github.com/openbacchus/bacchus
>
> It seems he has upgraded to installing via an ansible playbook. I can get
> this to
I am trying to get Bacchus installed:
https://github.com/openbacchus/bacchus
It seems he has upgraded to installing via an ansible playbook. I can get
this to run all the way through, hopefully NGINX either ends up responding
with a "Gateway error" or it will give me the default nginx landing pag
Hello list!
I have been trying to rename a disk alias that defaults to
"some_template_name-Disk1" to something more logical by using ovirtsdk4 (in my
example to "vm2_disk_0"). On the list itself, I saw a couple of examples for
older version of SDK. Basically, I am trying to create a VM and then
Yuval, thanks for you assistance & guidance.
I just wanted to confirm that with /var/crash mounted (and leftover v4.2.5.1 LV
from previous failed installation removed) - I was able to successfully upgrade
from v4.2.4 to v4.2.5.1.
Thanks again - Glenn
Hi,
I believe the EMC VNX iSCSI and NFS traffic are not on the same network
interface.
I'd check the bottleneck between the hypervisor and the storage, you can
use 'iperf' [1] for that.
And also, try to check the connectivity to the VNX's NFS ports while the VM
is paused while loading data on the
On Wed, Aug 22, 2018 at 4:21 PM Gianluca Cecchi
wrote:
> On Wed, Aug 22, 2018 at 4:03 PM Simone Tiraboschi
> wrote:
>
>>
>>
>> On Wed, Aug 22, 2018 at 1:00 PM Gianluca Cecchi <
>> gianluca.cec...@gmail.com> wrote:
>>
>>> Hello,
>>> following this reference guide:
>>>
>>> https://www.ovirt.org/do
Hi
I keep losing ib0 connection on hypervisor after adding host to engine.
This makes the host not really work since NFS will be mounted over ib0.
I don't really understand why this occurs.
OS:
[root@ovirt-hv2 ~]# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)
Here's the network
On Wed, Aug 22, 2018 at 5:28 PM Daniel Renaud
wrote:
> No more VM in problem since I remove the CPU type , etc. Theses values
> came back the same as they was but no more problem starting the VMs after
>
I see.
That's a pity because we cannot figure out what actually lead to that NPE
that I saw
It says I am not authorized. Can you give me permission to comment? My
bugzilla account would be d...@med.cornell.edu.
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: d...@med.cornell.edu
O: 212-746-6305
F: 212
2018-08-22 14:59 GMT+02:00 Douglas Duckworth :
> Yay, I was able to restore nsswitch so things now work.
>
> Anyway that oVirt can use SSSD for web auth?
>
> Per https://ovirt.org/develop/release-management/features/infra/aaa_faq/
> there's a bug https://bugzilla.redhat.com/show_bug.cgi?id=829292
On Wed, Aug 22, 2018 at 4:03 PM Simone Tiraboschi
wrote:
>
>
> On Wed, Aug 22, 2018 at 1:00 PM Gianluca Cecchi
> wrote:
>
>> Hello,
>> following this reference guide:
>>
>> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/
>>
>> after having run with suc
On Wed, Jun 13, 2018 at 1:18 PM Leo David wrote:
> Finnally !!!
> Femi, thank you so much !!! I wouldn't have been able do solve this
> without your help.
> So, just as info:
> In this version ( iso ovirt-node-ng-installer-ovirt-4.2-2018053012 ) ,
> multipah.conf seems to be alrady configured t
On Wed, Aug 22, 2018 at 1:00 PM Gianluca Cecchi
wrote:
> Hello,
> following this reference guide:
>
> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/
>
> after having run with success the gdeploy based gluster setup, there is
>
> Setting up Hosted Engin
Hello,
I'm facing a strange issue on my OVirt Dev pool.
Indeed, when I create high disk load a VM (kickstart installation or iozone
test for example) , VM is paused due to storage I/O error.
Problem is 100% reproducible, and is located only on NFS (v3 and v4) on my EMC
VNXe3200 NAS's (I have a
On Wed, Aug 22, 2018 at 4:51 PM Daniel Renaud
wrote:
> I checked for the unmanaged interface and they was all ok in the 3 vm
>
And do you still have a VM that experieces such failures?
>
> --
> Daniel Renaud
> Analyste Sécurité & Système
> DJJ Consultants, http://www.djj-consultants.com
> Télé
I checked for the unmanaged interface and they was all ok in the 3 vm
--
Daniel Renaud
Analyste Sécurité & Système
DJJ Consultants, http://www.djj-consultants.com
Téléphone : 418-907-9530, poste 200
GPG key : 0x7189C9D0
> Le 22 août 2018 à 09:43, Arik Hadas a écrit :
>
>
>
>> On Wed, Aug 22,
Thanks!
I am downgrading to an older kernel to see if kdump will work. My other
hypervisor works fine with 3.10.0-862.9.1.el7 but this host has a newer one.
Sorry for disorganized nature of this thread.
Can you tell me how to get ib0 set as migration network?
Thanks,
Douglas Duckworth, MSc, L
On Wed, Aug 22, 2018 at 3:07 PM Daniel Renaud
wrote:
> Hi
>
> I didn't upgrade and the run once didn't solve the issue but . When I
> use run once again, I remove (in the system tab) Custom emulate machine and
> Custom CPU type (leave it blank) and the run once worked. After that, I
> can sh
On Wed, Aug 22, 2018 at 3:13 PM Douglas Duckworth
wrote:
> OK, after a while this host goes into bad state due to "HA score." Could
> this be due to kdump not being enabled?
>
We have an open bug on that:
https://bugzilla.redhat.com/show_bug.cgi?id=1619365
it's not kdump related.
The host will
● kdump.service - Crash recovery kernel arming
Loaded: loaded (/usr/lib/systemd/system/kdump.service; enabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Wed 2018-08-22 09:30:04 EDT;
1min 50s ago
Process: 12714 ExecStart=/usr/bin/kdumpctl start (code=exited,
status=1/F
OK, after a while this host goes into bad state due to "HA score." Could
this be due to kdump not being enabled?
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: d...@med.cornell.edu
O: 212-746-6305
F: 212-746-86
FYI,
This allowed SSSD to work on hosted engine at least for system auth
semanage fcontext -a -t net_conf_t '/etc/hosts'
/sbin/restorecon -v /etc/hosts
sealert -a /var/log/audit/audit.log shows a ton of daemons were unable to
read /etc/hosts...
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System
Yay, I was able to restore nsswitch so things now work.
Anyway that oVirt can use SSSD for web auth?
Per https://ovirt.org/develop/release-management/features/infra/aaa_faq/
there's a bug https://bugzilla.redhat.com/show_bug.cgi?id=829292 that
prevents it from working?
Thanks,
Douglas Duckwor
Hi
I am trying to configure sssd on my hosted engine. Essentially we control
host access in LDAP so I want sssd to read that thus allow my coworkers to
login to hosted engine vm.
For some reason sssd reports backend offline even though it's resolvable,
pingable, with ports open. I see that it's
Hi,
Am 21.08.2018 um 17:02 schrieb Michal Skrivanek:
[...]
Hi Bernhard,
With the latest version of the ovirt-imageio and the v2v we are
performing quite nicely, and without specifying
the difference is that with the integrated v2v you don’t use any of
that. It’s going through the vCenter s
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi Avihai,
I added code to check the disk status, but the disks seems to be in OK
state.
# checking disk states
snap_disks_service = snap_service.disks_service()
snap_disks = snap_disks_service.list()
for snap_disk in snap_disks:
print("Disk %s
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi Avihai,
I will report it. Meanwhile I found another bug in UI ;(
Right now I'm trying to add disk status code, just to confirm what you
said.
Peter
On 22/08/2018 13:48, Avihai Efrat wrote:
> Hi Peter,
>
> Would you mind reporting a bu
Thanks everyone!
During reinstall ran into this error:
Job for kdump.service failed because the control process exited with error
code. See "systemctl status kdump.service" and "journalctl -xe" for details.
2018-08-22 07:40:57,846-0400 DEBUG
otopi.plugins.ovirt_host_deploy.kdump.packages package
Do you remember to what version of oVirt you upgraded the 4.1/4.0/3.6
cluster?
It sounds like a bug we had (relatively long time ago) that lead to having
duplicated unmanaged devices.
Can you please check in the VM devices tab if you have unmanaged network
interfaces? if you do, it was reported tha
Hello,
following this reference guide:
https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/
after having run with success the gdeploy based gluster setup, there is
Setting up Hosted Engine
Use the Ansible based installation flow of Hosted Engine to set up oV
I also tried to export (work) and re-import(work) the same VM and try to start
the imported one with the same result that it didn't start
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: h
On Wed, Aug 22, 2018 at 10:11 AM Ariez Ahito
wrote:
> other host
> ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem
> host_id=2
>
>
>
OK, so the issue comes from here.
Can you please share host-deploy logs for that host and engine.log for the
relevant time frame?
>
> host where the vm recides
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 22/08/2018 10:06, Simone Tiraboschi wrote:
> > > On Wed, Aug 22, 2018 at 12:45 AM Peter Hudec mailto:phu...@cnc.sk>> wrote: > > Hi guys, > > I need to deal with
following scenario. > > I have 2 servers with local storage, no shared
storage. > > >
other host
ca_cert=/etc/pki/vdsm/libvirt-spice/ca-cert.pem
host_id=2
host where the vm recides
host_id=1
console=vnc
domainType=fc
spUUID=----
sdUUID=4b7d4cf2-bfb9-4a41-927c-6a0801acd6cd
connectionUUID=0a776144-a38d-43fd-8c67-e2e5ad315767
ca_cert=/etc/pki/vdsm/li
On Wed, Aug 22, 2018 at 12:45 AM Peter Hudec wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> Hi guys,
>
> I need to deal with following scenario.
>
> I have 2 servers with local storage, no shared storage.
>
With three hosts you could have hyper converged GlusterFS, one of three
h
What used to catch me out here, is that you need to set 'Choose hosted
engine deployment action' to deploy when adding a new physical host.
On 22 August 2018 at 08:51, Simone Tiraboschi wrote:
> The hosts that are eligible for running the engine VM should be flagged
> with a silver crown, the ho
The hosts that are eligible for running the engine VM should be flagged
with a silver crown, the host that runs the engine VM with a gold run.
In your screenshot I see the gold crow but not the silver one on the second
host so you have to double check if hosted-engine stuff has been correctly
deplo
On Wed, Aug 22, 2018 at 6:54 AM Ariez Ahito
wrote:
> yeah thats the reason why i posted it here
>
Can you please share host-deploy logs and the content of
/etc/ovirt-hosted-engine/hosted-engine.conf for your additional hosts?
> ___
> Users mailing li
40 matches
Mail list logo