Strahil,
Once Again Thank You For Your Help !
On Tue, Sep 29, 2020 at 11:29 AM Strahil Nikolov
wrote:
> One important step is to align the XFS to the stripe size * stripe width.
> Don't miss it or you might have issues.
>
> Details can be found at:
> https://access.redhat.com/documentation/en-u
Strahil,
Thank You For Your Help !
On Tue, Sep 29, 2020 at 11:24 AM Strahil Nikolov
wrote:
>
> More questions on this -- since I have 5 servers . Could the following
> work ? Each server has (1) 3TB RAID 6 partition that I want to use for
> contiguous storage.
>
> Mountpoint for RAID 6 partit
Hi Benny,
Thanks for the confirmation. I've installed openstack-ussuri and ceph
Octopus. Then I tried using these instructions, as well as the deep
dive that Eyal has posted at https://www.youtube.com/watch?v=F3JttBkjsX8.
I've done this a couple of times, and each time the engine fails when
The feature is currently in tech preview, but it's being worked on.
The feature page is outdated, but I believe this is what most users
in the mailing list were using. We held off on updating it because the
installation instructions have been a moving target, but it is more
stable now and I will u
I'm looking for the latest documentation for setting up a Managed Block
Device storage domain so that I can move some of my VM images to ceph rbd.
I found this:
https://ovirt.org/develop/release-management/features/storage/cinderlib-integration.html
...but it has a big note at the top that it
Hello, I'm trying to update our hosted-engine ovirt to version 4.4 from 4.3.10
and everything goes fine until
hosted-engine --deploy tries to add new hosted_storage domain, we have NFS
storage domains, and it
fails with error:
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domai
I have an odd situation:
When I go to
https://ovengine/ovirt-engine/webadmin/?locale=en_US
after authentication passes...
it shows the top banner of
oVirt OPEN VIRTUALIZATION MANAGER
and the
Loading ...
in the center. but never gets past that. Any suggestions on how I could
investigate
One important step is to align the XFS to the stripe size * stripe width. Don't
miss it or you might have issues.
Details can be found at:
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/html-single/administration_guide/index#sect-Disk_Configuration
Best Regards,
Strah
More questions on this -- since I have 5 servers . Could the following work ?
Each server has (1) 3TB RAID 6 partition that I want to use for contiguous
storage.
Mountpoint for RAID 6 partition (3TB) /brick
Server A: VOL1 - Brick 1 directory
/brick/brick
Hello,
We have decided to get a 6th server for the install. I hope to set up a 2x3
Distributed replica 3 .
So we are not going to worry about the "5 server" situation.
Thank You All For Your Help !!
On Mon, Sep 28, 2020 at 5:53 PM C Williams wrote:
> Hello,
>
> More questions on this -- since
On Tue, Sep 29, 2020 at 11:46 AM Raphael Höser wrote:
> I have a VM which was send a "Reboot" and "Shutdown" command in short
> succession (two admins who were not thinking the same way) and now the VM
> is Stuck in "Rebooting".
> It has no Host assigned and when trying to turn it of (via Shutdow
I think I found field to change host connection from IP to FQDN:
select * from vds_static
change "host_name"
Change IP to fqdn
To test .. I reboot cluster. Getting a few other errors but ... I think
those are unrelated... will post if / as I learn more.. but so far this
seems to be working.
On Tue, Sep 29, 2020 at 11:02 AM Gianluca Cecchi
wrote:
> Hello,
> having to monitor and check live storage migrations, it seems to me that
> scrolling through events I can see information about the target storage
> domain name, but nothing about the source. Is it correct?
>
> Can it be added? Wh
I have a VM which was send a "Reboot" and "Shutdown" command in short
succession (two admins who were not thinking the same way) and now the VM is
Stuck in "Rebooting".
It has no Host assigned and when trying to turn it of (via Shutdown or Power
Off) it gives this error:
Sep 29, 2020, 10:27:10
Hello,
having to monitor and check live storage migrations, it seems to me that
scrolling through events I can see information about the target storage
domain name, but nothing about the source. Is it correct?
Can it be added? Which kind of rfe bugzilla should I use in case? Against
what?
Thanks,
15 matches
Mail list logo