[ovirt-users] multipath active-passive vs active-active
Dear All, I have been using ovirt for many years. I've got six servers , two HPE MSA storage and a fiber channel network with two Brocade 8/20q. oVirt has got two domain storage, one volume for each MSA. Now I have only one MSA online. As you know multipath was configured throught vdsm. This is the output of the multipath command from one of the servers: [root@infm-vm04 etc]# multipath -ll 3600c0ff0003c465b6510f85b0100 dm-2 HPE ,MSA 2050 SAN size=14T features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=1 status=active | `- 2:0:0:0 sdc 8:32 active ready running |-+- policy='service-time 0' prio=1 status=enabled | `- 1:0:0:0 sdb 8:16 active ready running |-+- policy='service-time 0' prio=1 status=enabled | `- 2:0:1:0 sdd 8:48 active ready running `-+- policy='service-time 0' prio=1 status=enabled `- 1:0:1:0 sde 8:64 active ready running With this setup I think there is an active path and the other is in standby state. So, Id like to know if ovrt support active-active mode and how can I make this settings ? /This is the current multipath.conf// // //defaults {// // polling_interval 5// // no_path_retry 4// // user_friendly_names no// // flush_on_last_del yes// // fast_io_fail_tmo 5// // dev_loss_tmo 30// // max_fds 4096// //}// //blacklist {// // protocol "(scsi:adt|scsi:sbp)"// //}// //devices {// // device {// // all_devs yes// // no_path_retry 4// // }// //}// / Thanks a lot. Bye Enrico -- ______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mobile: +39 075 9696225 FAX: +39 075 5847296Microsoft Teams:becch...@infn.it Mail: Enrico.Becchettipg.infn.it Skype:enrico_becchetti Pagina web personale:https://www.pg.infn.it/home/enrico-becchetti _ smime.p7s Description: Firma crittografica S/MIME ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q4BZOY55EL43B4PY46YPYZA5VOHHZUIP/
[ovirt-users] [SOLVED] Re: how to override host in console.vv
Hi all, If it can be useful I fix it using ovirt admin portal: HOSTS -> server_01 -> EDIT -> "Console and GPU" -> flag "override display" -> public ip address after that I use linux iptables to allow nat destination like this: iptables -t nat -A PREROUTING -d 1.1.1.1 -p tcp --dport 5900:6500 -j DNAT --to-destination 10.0.0.1:5900-65000 Best Regards Enrico Il 09/04/21 08:47, Enrico Becchetti ha scritto: Hi all, I use ovirt 4.3.10 with an engine running in a standalone virtual machine. The operating system of this engine and the hypervisors is CentOS 7. In the initial setup I chose a name for the engine, ovirt.local, then I added a second public IP address named ovirt.mydomain in order to allow the user portal also from the Internet. Now here's my problem. Users are able to connect to the VM portal but they cannot access the console of their virtual machines. Checking the console.vv file I noticed that there are two parts, the first [virt-viewer] which contains the hypervisor on which the virtual machine runs, and the second in this configuration [ovirt] inside ovirt I've got "host = ovirt.local: 443". Now I would like to change the value of the "host" parameter with the FQDN. Can you tell me how I can set an override of this variable ? Thanks a lot. Best Regards Enrico -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2VEXZR7KDPYDRZWW3A5DABVOHJN5AR3R/
[ovirt-users] how to override host in console.vv
Hi all, I use ovirt 4.3.10 with an engine running in a standalone virtual machine. The operating system of this engine and the hypervisors is CentOS 7. In the initial setup I chose a name for the engine, ovirt.local, then I added a second public IP address named ovirt.mydomain in order to allow the user portal also from the Internet. Now here's my problem. Users are able to connect to the VM portal but they cannot access the console of their virtual machines. Checking the console.vv file I noticed that there are two parts, the first [virt-viewer] which contains the hypervisor on which the virtual machine runs, and the second in this configuration [ovirt] inside ovirt I've got "host = ovirt.local: 443". Now I would like to change the value of the "host" parameter with the FQDN. Can you tell me how I can set an override of this variable ? Thanks a lot. Best Regards Enrico -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ISWQNKMUMVBAKFPHIEJN2RHRPPR5QHXN/
[ovirt-users] Re: user portal
I've got a new X509 valid certificate signed from official CA , so my question is , Can I add this cert inside engine ? Thanks again Enrico Il 23/03/21 09:45, Michal Skrivanek ha scritto: On 23. 3. 2021, at 7:55, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Hi, I've added a new ip public address and SSO_ALTERNATE_ENGINE_FQDNS, after that I run engine-setup. and now ovirt can also be access with a new name but the last item is about X509 certificate. How can I add a second certificate for this new url ? I think you’d have to use your own CA, the internal one doesn’t generate certificates with other names. or as Didi suggested modify your DNS to use same FQDN for both ways Best regards. Enrico Il 07/03/21 08:51, Yedidyah Bar David ha scritto: On Fri, Mar 5, 2021 at 10:18 AM Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear all, I'm using ovirt 4.3.2 with its engine on a virtual machine. The nodes are all Centos 7.7. Is this a hosted-engine? no Both engine and hypervisor systems work on a 10.0.0.0 private network. Now I would like to let users access the ovirt web page (user portal) and for this I must necessarily add a second network interface to the engine by inserting a public ip. I can't use NAT. Can you give me any advice for this operation ? Can I add the network interface and then run engine-setup ? Will oVirt be accessible from both ip addresses at the end of this operation ? Generally speaking: 1. You should be able to add an IP address to the existing NIC. If this is a hosted-engine, this might be simpler than adding a NIC. Of course, this might not be relevant in your case, depending on network topology, conf, etc. 2. The engine itself does not care at all about which IP addresses are used to connect to it. Neither is httpd that is running there as a frontend to it - it listens on all addresses. So just add the address somehow, perhaps restart httpd if needed (but I do not think so), and everything should work. 3. The engine _does_ care about the _name_. So make sure you use the existing name. For this, you'll have to change your DNS, or /etc/hosts, as applicable. 4. If it's complex for you to keep the existing name (e.g. because you want to make it work from both old and new addresses, etc.), you can also add another name that the engine will agree to be connected to, using SSO_ALTERNATE_ENGINE_FQDNS, see e.g. [1]. Best regards, [1] https://www.ovirt.org/develop/networking/changing-engine-hostname.html <https://www.ovirt.org/develop/networking/changing-engine-hostname.html> Lots of thanks. Enrico -- _______ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html <https://www.ovirt.org/privacy-policy.html> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ <https://www.ovirt.org/community/about/community-guidelines/> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZW2SGNYGA4MEGUCA2ONQ3RVBRWIYMUJZ/ <https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZW2SGNYGA4MEGUCA2ONQ3RVBRWIYMUJZ/> -- ___ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list --users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email tousers-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement:https://www.ovirt.org/privacy-policy.html <https://www.ovirt.org/privacy-policy.html> oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ <https://www.ovirt.org/community/about/community-guidelines/> List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/MTSY7BKGWKFGBQXREFO4IBZESB62ESWG/ <https://lists.ovirt.org/archives/list/users@ovirt.org/message/MTSY7BKGWKFGBQXREFO4IBZESB62ESWG/> -- ___ Enrico
[ovirt-users] Re: user portal
Hi, I've added a new ip public address and SSO_ALTERNATE_ENGINE_FQDNS, after that I run engine-setup. and now ovirt can also be access with a new name but the last item is about X509 certificate. How can I add a second certificate for this new url ? Best regards. Enrico Il 07/03/21 08:51, Yedidyah Bar David ha scritto: On Fri, Mar 5, 2021 at 10:18 AM Enrico Becchetti wrote: Dear all, I'm using ovirt 4.3.2 with its engine on a virtual machine. The nodes are all Centos 7.7. Is this a hosted-engine? no Both engine and hypervisor systems work on a 10.0.0.0 private network. Now I would like to let users access the ovirt web page (user portal) and for this I must necessarily add a second network interface to the engine by inserting a public ip. I can't use NAT. Can you give me any advice for this operation ? Can I add the network interface and then run engine-setup ? Will oVirt be accessible from both ip addresses at the end of this operation ? Generally speaking: 1. You should be able to add an IP address to the existing NIC. If this is a hosted-engine, this might be simpler than adding a NIC. Of course, this might not be relevant in your case, depending on network topology, conf, etc. 2. The engine itself does not care at all about which IP addresses are used to connect to it. Neither is httpd that is running there as a frontend to it - it listens on all addresses. So just add the address somehow, perhaps restart httpd if needed (but I do not think so), and everything should work. 3. The engine _does_ care about the _name_. So make sure you use the existing name. For this, you'll have to change your DNS, or /etc/hosts, as applicable. 4. If it's complex for you to keep the existing name (e.g. because you want to make it work from both old and new addresses, etc.), you can also add another name that the engine will agree to be connected to, using SSO_ALTERNATE_ENGINE_FQDNS, see e.g. [1]. Best regards, [1] https://www.ovirt.org/develop/networking/changing-engine-hostname.html Lots of thanks. Enrico -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZW2SGNYGA4MEGUCA2ONQ3RVBRWIYMUJZ/ -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MTSY7BKGWKFGBQXREFO4IBZESB62ESWG/
[ovirt-users] user portal
Dear all, I'm using ovirt 4.3.2 with its engine on a virtual machine. The nodes are all Centos 7.7. Both engine and hypervisor systems work on a 10.0.0.0 private network. Now I would like to let users access the ovirt web page (user portal) and for this I must necessarily add a second network interface to the engine by inserting a public ip. I can't use NAT. Can you give me any advice for this operation ? Can I add the network interface and then run engine-setup ? Will oVirt be accessible from both ip addresses at the end of this operation ? Lots of thanks. Enrico -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Skype:enrico_becchetti Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZW2SGNYGA4MEGUCA2ONQ3RVBRWIYMUJZ/
[ovirt-users] update from 4.2 to 4.3
Dear All. my engine running in a virtual machine Centos 7.6.1810 and ovirt release is 4.2.8.2-1.el7 my hypervisors are Centos 7.6.1810 with vdsm 4.20.46-1.el7, allof them are ovirt-4.2 repository. Now I need to update to the last 4.3 any suggestions ? Thanks a lot Best Regards Enrico -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3AH2JSZFSNHM3B2AI3LBRCADLNMVDOT2/
[ovirt-users] Re: VM fail to start with hook...
Ciao Sandro ! these are some info from engine log: 2018-09-19 15:03:19,793+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-5) [] EVENT_ID: VM_DOWN_ERROR(119), VM BACULA is down with error. Exit message: Hook Error: ('',). 2018-09-19 15:03:19,803+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1894583) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM BACULA on Host infn-vm05.management. 2018-09-19 15:03:19,848+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1894583) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM BACULA (User: admin@internal-authz). BACULA 2018-09-19 15:04:26,684+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (ForkJoinPool-1-worker-7) [] EVENT_ID: VM_DOWN_ERROR(119), VM BACULA is down with error. Exit message: Hook Error: ('',). 2018-09-19 15:04:26,701+02 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1894610) [] EVENT_ID: USER_INITIATED_RUN_VM_FAILED(151), Failed to run VM BACULA on Host infn-vm05.management. 2018-09-19 15:04:26,743+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1894610) [] EVENT_ID: USER_FAILED_RUN_VM(54), Failed to run VM BACULA (User: admin@internal-authz). BACULA I've filtered only ERROR lines. Thanks a lot !! Enrico Il 19/09/2018 16:18, Sandro Bonazzola ha scritto: Il giorno mer 19 set 2018 alle ore 16:12 Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> ha scritto: Dear All, I have three servers with VDSM and a vm with ovirt 4.2.4.5-1.el7, all using a Centos 7. I still need you for a problem with a virtual machine. I needed to connect the tape of a hypervisor to a vm and then I changed the Host Device by adding the ST driver. After making this change the VM is no longer playing even after removing this hook. Does anyone have any ideas? Ciao Enrico, can you please share a log collector report? Thanks a lot Best Regasrds Enrico -- _______ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it <http://pg.infn.it> __ ___ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EJHA2MBT2AQPW6O64KUKVHRG2R7LKIDN/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbona...@redhat.com <mailto:sbona...@redhat.com> <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f200RgRyAAK> -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/U6YKCSSZ4O3DQT5CTLFY63DTU6DK4TFE/
[ovirt-users] VM fail to start with hook...
Dear All, I have three servers with VDSM and a vm with ovirt 4.2.4.5-1.el7, all using a Centos 7. I still need you for a problem with a virtual machine. I needed to connect the tape of a hypervisor to a vm and then I changed the Host Device by adding the ST driver. After making this change the VM is no longer playing even after removing this hook. Does anyone have any ideas? Thanks a lot Best Regasrds Enrico -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EJHA2MBT2AQPW6O64KUKVHRG2R7LKIDN/
[ovirt-users] Re: Cannot acquire Lock .... snapshot error
Hi all, after update vdsm I run this command: /[root@infm-vm04 ~]# vdsm-tool -v check-volume-leases// //WARNING: Make sure there are no running storage operations.// // //Do you want to check volume leases? [yes,NO] yes// // //Checking active storage domains. This can take several minutes, please wait.// / After that I saw some volumes with issue: /The following volume leases need repair:// // //- domain: 47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5// // // - image: 4b2a6552-847c-43f4-a180-b037d0b93a30// // - volume: 6eb8caf0-b120-40e5-86b5-405f15d1245a// // - image: 871196b2-9d8b-422f-9a3e-be54e100dc5c// // - volume: 861ff7dd-a01c-47f7-8a01-95bc766c2607// // - image: 267b8b8c-da09-44ef-81b3-065dfa2e7085// // - volume: d5f3158a-87ac-4c02-84ba-fcb86b8688a0// // - image: c5611862-6504-445e-a6c8-f1e1a95b5df7// // - volume: e156ac2e-09ac-4e1e-a139-17fa374a96d4// // - image: e765c9c4-2ef9-4c8f-a573-8cd2b0a0a3a2// // - volume: 47d81cbe-598a-402a-9795-1d046c45b7b1// // - image: ab88a08c-910d-44dd-bdf8-8242001ba527// // - volume: 86c72239-525f-4b0b-9aa6-763fc71340bc// // - image: 5e8c4620-b6a5-4fc6-a5bb-f209173d186c// // - volume: 0f52831b-ec35-4140-9a8c-fa24c2647f17// // - image: a67809fc-b830-4ea3-af66-b5b9285b4924// // - volume: 26c6bdd7-1382-4e8e-addc-dcd3898b317f// // //Do you want to repair the leases? [yes,NO] / what happen If I try to repair them ? Is there any impact to my running vm ? Thanks a lot !!! Best Regards Enrico Il 26/06/2018 15:32, Ala Hino ha scritto: You are running vdsm-4.20.17, and the tool introduced in vdsm-4.20.24. You will have to upgrade vdsm to be able to use the tool. On Tue, Jun 26, 2018 at 4:29 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Hi, I run this command from my SPM , Centos 7.4.1708: [root@infn-vm05 vdsm]# rpm -qa | grep -i vdsm vdsm-hook-vmfex-dev-4.20.17-1.el7.centos.noarch vdsm-python-4.20.17-1.el7.centos.noarch vdsm-hook-fcoe-4.20.17-1.el7.centos.noarch vdsm-common-4.20.17-1.el7.centos.noarch vdsm-jsonrpc-4.20.17-1.el7.centos.noarch vdsm-hook-ethtool-options-4.20.17-1.el7.centos.noarch vdsm-hook-openstacknet-4.20.17-1.el7.centos.noarch vdsm-http-4.20.17-1.el7.centos.noarch vdsm-client-4.20.17-1.el7.centos.noarch vdsm-gluster-4.20.17-1.el7.centos.noarch vdsm-hook-vfio-mdev-4.20.17-1.el7.centos.noarch vdsm-api-4.20.17-1.el7.centos.noarch vdsm-network-4.20.17-1.el7.centos.x86_64 vdsm-yajsonrpc-4.20.17-1.el7.centos.noarch vdsm-4.20.17-1.el7.centos.x86_64 vdsm-hook-vhostmd-4.20.17-1.el7.centos.noarch Thanks !!! Enrico Il 26/06/2018 15:21, Ala Hino ha scritto: Hi Enrico, What's the vdsm version that you are using? The tool introduced in vdsm 4.20.24. On Tue, Jun 26, 2018 at 3:51 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear Ala, if you have a few minutes for me I'd like to ask you to read my issue. It's a strange problem because my vm works fine but I can't delete its snapshoot. Thanks a lot Best Regards Enrico Messaggio Inoltrato Oggetto:[ovirt-users] Re: Cannot acquire Lock snapshot error Data: Mon, 25 Jun 2018 14:20:21 +0200 Mittente: Enrico Becchetti <mailto:enrico.becche...@pg.infn.it> A: Nir Soffer <mailto:nsof...@redhat.com> CC: users <mailto:users@ovirt.org> Dear Friends , to fix my problem I've try vdsm-tool command but it's seem an error: [root@infn-vm05 vdsm]# vdsm-tool check-volume-lease Usage: /usr/bin/vdsm-tool [options] [arguments] Valid options: .. as you can see there isn't check-volumes-option and my ovirt engine is already at 4.2. Any other ideas ? Thanks a lot ! Best Regards Enrico Il 22/06/2018 17:46, Nir Soffer ha scritto: On Fri, Jun 22, 2018 at 3:13 PM Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e1
[ovirt-users] Re: Cannot acquire Lock .... snapshot error
Hi, I run this command from my SPM , Centos 7.4.1708: [root@infn-vm05 vdsm]# rpm -qa | grep -i vdsm vdsm-hook-vmfex-dev-4.20.17-1.el7.centos.noarch vdsm-python-4.20.17-1.el7.centos.noarch vdsm-hook-fcoe-4.20.17-1.el7.centos.noarch vdsm-common-4.20.17-1.el7.centos.noarch vdsm-jsonrpc-4.20.17-1.el7.centos.noarch vdsm-hook-ethtool-options-4.20.17-1.el7.centos.noarch vdsm-hook-openstacknet-4.20.17-1.el7.centos.noarch vdsm-http-4.20.17-1.el7.centos.noarch vdsm-client-4.20.17-1.el7.centos.noarch vdsm-gluster-4.20.17-1.el7.centos.noarch vdsm-hook-vfio-mdev-4.20.17-1.el7.centos.noarch vdsm-api-4.20.17-1.el7.centos.noarch vdsm-network-4.20.17-1.el7.centos.x86_64 vdsm-yajsonrpc-4.20.17-1.el7.centos.noarch vdsm-4.20.17-1.el7.centos.x86_64 vdsm-hook-vhostmd-4.20.17-1.el7.centos.noarch Thanks !!! Enrico Il 26/06/2018 15:21, Ala Hino ha scritto: Hi Enrico, What's the vdsm version that you are using? The tool introduced in vdsm 4.20.24. On Tue, Jun 26, 2018 at 3:51 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear Ala, if you have a few minutes for me I'd like to ask you to read my issue. It's a strange problem because my vm works fine but I can't delete its snapshoot. Thanks a lot Best Regards Enrico Messaggio Inoltrato Oggetto:[ovirt-users] Re: Cannot acquire Lock snapshot error Data: Mon, 25 Jun 2018 14:20:21 +0200 Mittente: Enrico Becchetti <mailto:enrico.becche...@pg.infn.it> A: Nir Soffer <mailto:nsof...@redhat.com> CC: users <mailto:users@ovirt.org> Dear Friends , to fix my problem I've try vdsm-tool command but it's seem an error: [root@infn-vm05 vdsm]# vdsm-tool check-volume-lease Usage: /usr/bin/vdsm-tool [options] [arguments] Valid options: .. as you can see there isn't check-volumes-option and my ovirt engine is already at 4.2. Any other ideas ? Thanks a lot ! Best Regards Enrico Il 22/06/2018 17:46, Nir Soffer ha scritto: On Fri, Jun 22, 2018 at 3:13 PM Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e156ac2e-09ac-4e1e-a139-17fa374a96d4'}) from=:::10.0.0.46,53304, flow_id=07011450-2296-4a13-a9ed-5d5d2b91be98, task_id=87f95d85-cc3d-4f29-9883-a4dbb3808f88 (api:46) 2018-06-22 07:35:48,406+0200 INFO (tasks/3) [storage.merge] Preparing subchain for merge (merge:177) 2018-06-22 07:35:48,614+0200 INFO (tasks/3) [storage.SANLock] Acquiring Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360) for host id 1 (clusterlock:377) 2018-06-22 07:35:48,634+0200 ERROR (tasks/3) [storage.guarded] Error acquiring lock (guarded:96) AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" 2018-06-22 07:35:56,881+0200 INFO (jsonrpc/7) [vdsm.api] FINISH getAllTasksStatuses return={'allTasksStatus': {'87f95d85-cc3d-4f29-9883-a4dbb3808f88': {'code': 651, 'message': 'Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name=\'e156ac2e-09ac-4e1e-a139-17fa374a96d4\', path=\'/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases\', offset=115343360), err=(-227, \'Sanlock resource not acquired\', \'Lease resource name is incorrect\')"', 'taskState': 'finished', 'taskResult': 'cleanSuccess', 'taskID': '87f95d85-cc3d-4f29-9883-a4dbb3808f88'}}} from=:::10.0.0.46,53136, task_id=d0e2f4e3-90cb-43c6-aa08-98d1f7efb1bd (api:
[ovirt-users] Fwd: Re: Cannot acquire Lock .... snapshot error
Dear Ala, if you have a few minutes for me I'd like to ask you to read my issue. It's a strange problem because my vm works fine but I can't delete its snapshoot. Thanks a lot Best Regards Enrico Messaggio Inoltrato Oggetto:[ovirt-users] Re: Cannot acquire Lock snapshot error Data: Mon, 25 Jun 2018 14:20:21 +0200 Mittente: Enrico Becchetti A: Nir Soffer CC: users Dear Friends , to fix my problem I've try vdsm-tool command but it's seem an error: [root@infn-vm05 vdsm]# vdsm-tool check-volume-lease Usage: /usr/bin/vdsm-tool [options] [arguments] Valid options: .. as you can see there isn't check-volumes-option and my ovirt engine is already at 4.2. Any other ideas ? Thanks a lot ! Best Regards Enrico Il 22/06/2018 17:46, Nir Soffer ha scritto: On Fri, Jun 22, 2018 at 3:13 PM Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e156ac2e-09ac-4e1e-a139-17fa374a96d4'}) from=:::10.0.0.46,53304, flow_id=07011450-2296-4a13-a9ed-5d5d2b91be98, task_id=87f95d85-cc3d-4f29-9883-a4dbb3808f88 (api:46) 2018-06-22 07:35:48,406+0200 INFO (tasks/3) [storage.merge] Preparing subchain for merge (merge:177) 2018-06-22 07:35:48,614+0200 INFO (tasks/3) [storage.SANLock] Acquiring Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360) for host id 1 (clusterlock:377) 2018-06-22 07:35:48,634+0200 ERROR (tasks/3) [storage.guarded] Error acquiring lock (guarded:96) AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" 2018-06-22 07:35:56,881+0200 INFO (jsonrpc/7) [vdsm.api] FINISH getAllTasksStatuses return={'allTasksStatus': {'87f95d85-cc3d-4f29-9883-a4dbb3808f88': {'code': 651, 'message': 'Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name=\'e156ac2e-09ac-4e1e-a139-17fa374a96d4\', path=\'/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases\', offset=115343360), err=(-227, \'Sanlock resource not acquired\', \'Lease resource name is incorrect\')"', 'taskState': 'finished', 'taskResult': 'cleanSuccess', 'taskID': '87f95d85-cc3d-4f29-9883-a4dbb3808f88'}}} from=:::10.0.0.46,53136, task_id=d0e2f4e3-90cb-43c6-aa08-98d1f7efb1bd (api:52) The issue is corrupted lease for this volume: AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" This root cause is faulty merge code in ovirt < 4.1, creating volume leases with incorrect name. These corrupted leases were not detected until you upgrade to ovirt >= 4.1, because we started to use volume leases for storage operations. The fix is to run vdsm-tool check-volume-leases This will check and repair corrupted leases. Adding Ala to add more info if needed. Nir -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of C
[ovirt-users] Re: Cannot acquire Lock .... snapshot error
Dear Friends , to fix my problem I've try vdsm-tool command but it's seem an error: [root@infn-vm05 vdsm]# vdsm-tool check-volume-lease Usage: /usr/bin/vdsm-tool [options] [arguments] Valid options: .. as you can see there isn't check-volumes-option and my ovirt engine is already at 4.2. Any other ideas ? Thanks a lot ! Best Regards Enrico Il 22/06/2018 17:46, Nir Soffer ha scritto: On Fri, Jun 22, 2018 at 3:13 PM Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e156ac2e-09ac-4e1e-a139-17fa374a96d4'}) from=:::10.0.0.46,53304, flow_id=07011450-2296-4a13-a9ed-5d5d2b91be98, task_id=87f95d85-cc3d-4f29-9883-a4dbb3808f88 (api:46) 2018-06-22 07:35:48,406+0200 INFO (tasks/3) [storage.merge] Preparing subchain for merge (merge:177) 2018-06-22 07:35:48,614+0200 INFO (tasks/3) [storage.SANLock] Acquiring Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360) for host id 1 (clusterlock:377) 2018-06-22 07:35:48,634+0200 ERROR (tasks/3) [storage.guarded] Error acquiring lock (guarded:96) AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" 2018-06-22 07:35:56,881+0200 INFO (jsonrpc/7) [vdsm.api] FINISH getAllTasksStatuses return={'allTasksStatus': {'87f95d85-cc3d-4f29-9883-a4dbb3808f88': {'code': 651, 'message': 'Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name=\'e156ac2e-09ac-4e1e-a139-17fa374a96d4\', path=\'/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases\', offset=115343360), err=(-227, \'Sanlock resource not acquired\', \'Lease resource name is incorrect\')"', 'taskState': 'finished', 'taskResult': 'cleanSuccess', 'taskID': '87f95d85-cc3d-4f29-9883-a4dbb3808f88'}}} from=:::10.0.0.46,53136, task_id=d0e2f4e3-90cb-43c6-aa08-98d1f7efb1bd (api:52) The issue is corrupted lease for this volume: AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" This root cause is faulty merge code in ovirt < 4.1, creating volume leases with incorrect name. These corrupted leases were not detected until you upgrade to ovirt >= 4.1, because we started to use volume leases for storage operations. The fix is to run vdsm-tool check-volume-leases This will check and repair corrupted leases. Adding Ala to add more info if needed. Nir -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DXBCBHHC3XNPQHO6HCWBUTNBAPOXU2G7/
[ovirt-users] Cannot acquire Lock .... snapshot error
Dear All, my ovirt 4.2.1.7-1.el7.centos has three hypervisors, lvm storage and virtiual machine with ovirt-engine. All works fine but with one vm when I try to remove its snapshot I have this error: 2018-06-22 07:35:48,155+0200 INFO (jsonrpc/5) [vdsm.api] START prepareMerge(spUUID=u'18d57688-6ed4-43b8-bd7c-0665b55950b7', subchainInfo={u'img_id': u'c5611862-6504-445e-a6c8-f1e1a95b5df7', u'sd_id': u'47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5', u'top_id': u'0e6f7512-871d-4645-b9c6-320ba7e3bee7', u'base_id': u'e156ac2e-09ac-4e1e-a139-17fa374a96d4'}) from=:::10.0.0.46,53304, flow_id=07011450-2296-4a13-a9ed-5d5d2b91be98, task_id=87f95d85-cc3d-4f29-9883-a4dbb3808f88 (api:46) 2018-06-22 07:35:48,406+0200 INFO (tasks/3) [storage.merge] Preparing subchain img_id=c5611862-6504-445e-a6c8-f1e1a95b5df7, top_id=0e6f7512-871d-4645-b9c6-320ba7e3bee7, base_id=e156ac2e-09ac-4e1e-a139-17fa374a96d4 base_generation=None at 0x7fcf84ae2510> for merge (merge:177) 2018-06-22 07:35:48,614+0200 INFO (tasks/3) [storage.SANLock] Acquiring Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360) for host id 1 (clusterlock:377) 2018-06-22 07:35:48,634+0200 ERROR (tasks/3) [storage.guarded] Error acquiring lock ns=04_lease_47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, name=e156ac2e-09ac-4e1e-a139-17fa374a96d4, mode=exclusive at 0x7fcfe09ddf90> (guarded:96) AcquireLockFailure: Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name='e156ac2e-09ac-4e1e-a139-17fa374a96d4', path='/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases', offset=115343360), err=(-227, 'Sanlock resource not acquired', 'Lease resource name is incorrect')" 2018-06-22 07:35:56,881+0200 INFO (jsonrpc/7) [vdsm.api] FINISH getAllTasksStatuses return={'allTasksStatus': {'87f95d85-cc3d-4f29-9883-a4dbb3808f88': {'code': 651, 'message': 'Cannot obtain lock: "id=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5, rc=-227, out=Cannot acquire Lease(name=\'e156ac2e-09ac-4e1e-a139-17fa374a96d4\', path=\'/dev/47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5/leases\', offset=115343360), err=(-227, \'Sanlock resource not acquired\', \'Lease resource name is incorrect\')"', 'taskState': 'finished', 'taskResult': 'cleanSuccess', 'taskID': '87f95d85-cc3d-4f29-9883-a4dbb3808f88'}}} from=:::10.0.0.46,53136, task_id=d0e2f4e3-90cb-43c6-aa08-98d1f7efb1bd (api:52) Any ideas ? Many thanks to everybody. Best Regards Enrico -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/O7AAGUEZG2W3T3I6Y4O7BDH4KOZHG5EN/
Re: [ovirt-users] Fwd: FreeIPA authentication broken
Dear All, I'm following this thread because thinking to SAML ovirt integration. Can you help me ? Does ovirt support this kind of authentication ? Could you send me more information or a link to guide ? Thanks a lot. Best Regards Enrico Il 25/04/2018 18:20, Kristian Petersen ha scritto: I restarted the service and it is working beautifully again. Thank you for you time and effort in helping me. As for what caused this mess... My hosted engine crashed after it's storage was temporarily disconnected by an automatic application of an update which then rebooted the NAS. After I was able to get the engine back up, but running my IPA logins didn't work anymore and I had no idea why that would be. I hadn't changed anything in relation to any of that so it made little sense why it stopped working. On Wed, Apr 25, 2018 at 1:39 AM, Ondra Machacek <mailto:omach...@redhat.com>> wrote: Yep, you need to restart ovirt-engine service so the changes take effect. Anyway, we need to figure out what removed your IPA.properties and IPA.jks file. What did you do before it stop work? On 04/25/2018 12:37 AM, Kristian Petersen wrote: -- Forwarded message -- From: *Kristian Petersen* mailto:nesre...@chem.byu.edu> <mailto:nesre...@chem.byu.edu <mailto:nesre...@chem.byu.edu>>> Date: Tue, Apr 24, 2018 at 12:38 PM Subject: Re: [ovirt-users] FreeIPA authentication broken To: Ondra Machacek mailto:omach...@redhat.com> <mailto:omach...@redhat.com <mailto:omach...@redhat.com>>> That directory only contains internal.properties. So I copied the IPA.properties, IPA-authn.properties, and IPA.jks files all into the 'aaa' subdirectory and set ownership and permissions as you directed. I reran the command you gave me initially and it prompted me for a password for the user when entered the process exited with status 0. However, the web interface still isn't letting me log in. Do I need to restart a service for the changes to be effective in the web UI? On Mon, Apr 23, 2018 at 11:59 PM, Ondra Machacek mailto:omach...@redhat.com> <mailto:omach...@redhat.com <mailto:omach...@redhat.com>>> wrote: Right, you are missing file /etc/ovirt-engine/aaa/IPA.properties It's not subdirectory of /etc/ovirt-engine/extensions.d, but it's in /etc/ovirt-engine/ in 'aaa' subdirectory, can you check what's there? Please check also the correct permissions of that file, it should be '600' and owned by ovirt user. On 04/23/2018 10:25 PM, Kristian Petersen wrote: Looks like it can't find the IPA.properties file. I tried following the path it is complaining about but there are only files in /etc/ovirt-engine/extensions.d on the engine VM. No subdirectories. However, that directory appears to contain the files it is looking for. Both IPA-authn.properties and IPA.properties are there as are the internal properties files. Is there a config file we can edit to tell it to look in the right place? -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry ___ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM has been paused due to NO STORAGE SPACE ERROR ?!?!?!?!
Il 16/03/2018 15:48, Alex Crow ha scritto: On 16/03/18 13:46, Nicolas Ecarnot wrote: Le 16/03/2018 à 13:28, Karli Sjöberg a écrit : Den 16 mars 2018 12:26 skrev Enrico Becchetti : Dear All, Does someone had seen that error ? Yes, I experienced it dozens of times on 3.6 (my 4.2 setup has insufficient workload to trigger such event). And in every case, there was no actual lack of space. Enrico Becchetti Servizio di Calcolo e Reti I think I remember something to do with thin provisioning and not being able to grow fast enough, so out of space. Are the VM's disk thick or thin? All our storage domains are thin-prov. and served by iSCSI (Equallogic PS6xxx and 4xxx). Enrico, do you know if a bug has been filed about this? Did the VM remain paused? In my experience the VM just gets temporarily paused while the storage is expanded. RH confirmed to me in a ticket that this is expected behaviour. If you need high write performance your VM disks should always be preallocated. We only use Thin Provision for VMs where we know that disk writes are low (eg network services, CPU-bound apps, etc). Thanks a lot !!! Best Regards Enrico Alex -- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use it in any way and are requested to delete the message along with any attachments and notify us immediately. This email is not intended to, nor should it be taken to, constitute advice. The information provided is correct to our knowledge & belief and must not be used as a substitute for obtaining tax, regulatory, investment, legal or any other appropriate advice. "Transact" is operated by Integrated Financial Arrangements Ltd. 29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608 5300. (Registered office: as above; Registered in England and Wales under number: 3727592). Authorised and regulated by the Financial Conduct Authority (entered on the Financial Services Register; no. 190856). ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM has been paused due to NO STORAGE SPACE ERROR ?!?!?!?!
yes ... it's a thin provisioning , in fact with preallocated disk type I haven't any problem. Thanks you so much Best Regards Enrico Il 16/03/2018 13:28, Karli Sjöberg ha scritto: Den 16 mars 2018 12:26 skrev Enrico Becchetti : Dear All, Does someone had seen that error ? When I run this command from my virtual machine: # time dd if=/dev/zero of=enrico.dd bs=4k count=1000 VM was paused due to kind a storage error/problem. Strange message because tell about "no storage space error" but ovirt puts virtual machine in a paused state. Inside events from ovirt web interface I see this: "VM has been paused due to lack of storage space" but no ERROR found in /var/log/vdsm.log. My oVirt enviroment 4.2.1 has three hypervivosr with FC storage and before now I haven't see any other problem during the normal functioning of the vm , it's seem that this error occurs only when there is massive I/O. Any ideas ? Thanks a lot. Best Regards Enrico -- _______ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I think I remember something to do with thin provisioning and not being able to grow fast enough, so out of space. Are the VM's disk thick or thin? /K Dear All, Does someone had seen that error ? When I run this command from my virtual machine: # time dd if=/dev/zero of=enrico.dd bs=4k count=1000 VM was paused due to kind a storage error/problem. Strange message because tell about "no storage space error" but ovirt puts virtual machine in a paused state. Inside events from ovirt web interface I see this: "VM has been paused due to lack of storage space" but no ERROR found in /var/log/vdsm.log. My oVirt enviroment 4.2.1 has three hypervivosr with FC storage and before now I haven't see any other problem during the normal functioning of the vm , it's seem that this error occurs only when there is massive I/O. Any ideas ? Thanks a lot. Best Regards Enrico -- ___ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- ___ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VM has been paused due to NO STORAGE SPACE ERROR ?!?!?!?!
Dear All, Does someone had seen that error ? When I run this command from my virtual machine: # time dd if=/dev/zero of=enrico.dd bs=4k count=1000 VM was paused due to kind a storage error/problem. Strange message because tell about "no storage space error" but ovirt puts virtual machine in a paused state. Inside events from ovirt web interface I see this: "VM has been paused due to lack of storage space" but no ERROR found in /var/log/vdsm.log. My oVirt enviroment 4.2.1 has three hypervivosr with FC storage and before now I haven't see any other problem during the normal functioning of the vm , it's seem that this error occurs only when there is massive I/O. Any ideas ? Thanks a lot. Best Regards Enrico -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Import Domain and snapshot issue ... please help !!!
Hi all, to remove lock I found this script: " /[root@ovirt-new dbutils]# ./unlock_entity.sh -t disk 01f9b5f2-9e48-4c24-80e5-dca7f1d4d128// //Caution, this operation may lead to data corruption and should be used with care. Please contact support prior to running this command// //Are you sure you want to proceed? [y/n]// //y// //select fn_db_unlock_disk('01f9b5f2-9e48-4c24-80e5-dca7f1d4d128');// //INSERT 0 1// //unlock disk 01f9b5f2-9e48-4c24-80e5-dca7f1d4d128 completed successfully.// " / but virtual disk is still lock. Enrico Il 16/02/2018 09:50, Enrico Becchetti ha scritto: After reboot engine virtual machine task disappear but virtual disk is still locked , any ideas to remove that lock ? Thanks again. Enrico l 16/02/2018 09:45, Enrico Becchetti ha scritto: Dear All, Are there tools to remove this task (in attach) ? taskcleaner.sh it's seems doens't work: [root@ovirt-new dbutils]# ./taskcleaner.sh -v -r select exists (select * from information_schema.tables where table_schema = 'public' and table_name = 'command_entities'); t SELECT DeleteAllCommands(); 6 [root@ovirt-new dbutils]# ./taskcleaner.sh -v -R select exists (select * from information_schema.tables where table_schema = 'public' and table_name = 'command_entities'); t This will remove all async_tasks table content!!! Caution, this operation should be used with care. Please contact support prior to running this command Are you sure you want to proceed? [y/n] y TRUNCATE TABLE async_tasks cascade; TRUNCATE TABLE after that I see the same running tasks . Does It make sense ? Thanks Best Regards Enrico Il 14/02/2018 15:53, Enrico Becchetti ha scritto: Dear All, old snapsahots seem to be the problem. In fact domain DATA_FC running in 3.5 had some lvm snapshot volume. Before deactivate DATA_FC I didin't remove this snapshots so when I attach this volume to new ovirt 4.2 and import all vm at the same time I also import all snapshots but now How I can remove them ? Throught ovirt web interface the remove tasks running are still hang. Are there any other methods ? Thank to following this case. Best Regads Enrico Il 14/02/2018 14:34, Maor Lipchuk ha scritto: Seems like all the engine logs are full with the same error. From vdsm.log.16.xz I can see an error which might explain this failure: 2018-02-12 07:51:16,161+0100 INFO (ioprocess communication (40573)) [IOProcess] Starting ioprocess (__init__:447) 2018-02-12 07:51:16,201+0100 INFO (jsonrpc/3) [vdsm.api] FINISH mergeSnapshots return=None from=:::10.0.0.46,57032, flow_id=fd4041b3-2301-44b0-aa65-02bd089f6568, task_id=1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (api:52) 2018-02-12 07:51:16,275+0100 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call Image.mergeSnapshots succeeded in 0.13 seconds (__init__:573) 2018-02-12 07:51:16,276+0100 INFO (tasks/1) [storage.ThreadPool.WorkerThread] START task 1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (cmd=of >, args=None) (threadPool:208) 2018-02-12 07:51:16,543+0100 INFO (tasks/1) [storage.Image] sdUUID=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5 vmUUID= imgUUID=ee9ab34c-47a8-4306-95d7-dd4318c69ef5 ancestor=9cdc96de-65b7-4187-8ec3-8190b78c1825 successor=8f595e80-1013-4c14-a2f5-252bce9526fdpostZero=False discard=False (image:1240) 2018-02-12 07:51:16,669+0100 ERROR (tasks/1) [storage.TaskManager.Task] (Task='1be430dc-eeb0-4dc9-92df-3f5b7943c6e0') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 336, in run return self.cmd(*self.argslist, **self.argsdict) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1853, in mergeSnapshots discard) File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line 1251, in merge srcVol = vols[successor] KeyError: u'8f595e80-1013-4c14-a2f5-252bce9526fd' Ala, maybe you know if there is any known issue with mergeSnapshots? The usecase here are VMs from oVirt 3.5 which got registered to oVirt 4.2. Regards, Maor On Wed, Feb 14, 2018 at 10:11 AM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Hi, also you can download them throught these links: https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD <https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD> https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb <https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb> Thanks again Best Regards Enrico Il 13/02/2018 14:52, Maor Lipchuk ha scritto: On Tue,
Re: [ovirt-users] Import Domain and snapshot issue ... please help !!!
After reboot engine virtual machine task disappear but virtual disk is still locked , any ideas to remove that lock ? Thanks again. Enrico l 16/02/2018 09:45, Enrico Becchetti ha scritto: Dear All, Are there tools to remove this task (in attach) ? taskcleaner.sh it's seems doens't work: [root@ovirt-new dbutils]# ./taskcleaner.sh -v -r select exists (select * from information_schema.tables where table_schema = 'public' and table_name = 'command_entities'); t SELECT DeleteAllCommands(); 6 [root@ovirt-new dbutils]# ./taskcleaner.sh -v -R select exists (select * from information_schema.tables where table_schema = 'public' and table_name = 'command_entities'); t This will remove all async_tasks table content!!! Caution, this operation should be used with care. Please contact support prior to running this command Are you sure you want to proceed? [y/n] y TRUNCATE TABLE async_tasks cascade; TRUNCATE TABLE after that I see the same running tasks . Does It make sense ? Thanks Best Regards Enrico Il 14/02/2018 15:53, Enrico Becchetti ha scritto: Dear All, old snapsahots seem to be the problem. In fact domain DATA_FC running in 3.5 had some lvm snapshot volume. Before deactivate DATA_FC I didin't remove this snapshots so when I attach this volume to new ovirt 4.2 and import all vm at the same time I also import all snapshots but now How I can remove them ? Throught ovirt web interface the remove tasks running are still hang. Are there any other methods ? Thank to following this case. Best Regads Enrico Il 14/02/2018 14:34, Maor Lipchuk ha scritto: Seems like all the engine logs are full with the same error. From vdsm.log.16.xz I can see an error which might explain this failure: 2018-02-12 07:51:16,161+0100 INFO (ioprocess communication (40573)) [IOProcess] Starting ioprocess (__init__:447) 2018-02-12 07:51:16,201+0100 INFO (jsonrpc/3) [vdsm.api] FINISH mergeSnapshots return=None from=:::10.0.0.46,57032, flow_id=fd4041b3-2301-44b0-aa65-02bd089f6568, task_id=1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (api:52) 2018-02-12 07:51:16,275+0100 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call Image.mergeSnapshots succeeded in 0.13 seconds (__init__:573) 2018-02-12 07:51:16,276+0100 INFO (tasks/1) [storage.ThreadPool.WorkerThread] START task 1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (cmd=of >, args=None) (threadPool:208) 2018-02-12 07:51:16,543+0100 INFO (tasks/1) [storage.Image] sdUUID=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5 vmUUID= imgUUID=ee9ab34c-47a8-4306-95d7-dd4318c69ef5 ancestor=9cdc96de-65b7-4187-8ec3-8190b78c1825 successor=8f595e80-1013-4c14-a2f5-252bce9526fdpostZero=False discard=False (image:1240) 2018-02-12 07:51:16,669+0100 ERROR (tasks/1) [storage.TaskManager.Task] (Task='1be430dc-eeb0-4dc9-92df-3f5b7943c6e0') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 336, in run return self.cmd(*self.argslist, **self.argsdict) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1853, in mergeSnapshots discard) File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line 1251, in merge srcVol = vols[successor] KeyError: u'8f595e80-1013-4c14-a2f5-252bce9526fd' Ala, maybe you know if there is any known issue with mergeSnapshots? The usecase here are VMs from oVirt 3.5 which got registered to oVirt 4.2. Regards, Maor On Wed, Feb 14, 2018 at 10:11 AM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Hi, also you can download them throught these links: https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD <https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD> https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb <https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb> Thanks again Best Regards Enrico Il 13/02/2018 14:52, Maor Lipchuk ha scritto: On Tue, Feb 13, 2018 at 3:51 PM, Maor Lipchuk mailto:mlipc...@redhat.com>> wrote: On Tue, Feb 13, 2018 at 3:42 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: see the attach files please ... thanks for your attention !!! Seems like the engine logs does not contain the entire process, can you please share older logs since the import operation? And VDSM logs as well from your host Best Regards Enrico Il 13/02/2018 14:09, Maor Lipchuk ha scritto: On Tue, Feb 13, 201
Re: [ovirt-users] Import Domain and snapshot issue ... please help !!!
Dear All, old snapsahots seem to be the problem. In fact domain DATA_FC running in 3.5 had some lvm snapshot volume. Before deactivate DATA_FC I didin't remove this snapshots so when I attach this volume to new ovirt 4.2 and import all vm at the same time I also import all snapshots but now How I can remove them ? Throught ovirt web interface the remove tasks running are still hang. Are there any other methods ? Thank to following this case. Best Regads Enrico Il 14/02/2018 14:34, Maor Lipchuk ha scritto: Seems like all the engine logs are full with the same error. From vdsm.log.16.xz I can see an error which might explain this failure: 2018-02-12 07:51:16,161+0100 INFO (ioprocess communication (40573)) [IOProcess] Starting ioprocess (__init__:447) 2018-02-12 07:51:16,201+0100 INFO (jsonrpc/3) [vdsm.api] FINISH mergeSnapshots return=None from=:::10.0.0.46,57032, flow_id=fd4041b3-2301-44b0-aa65-02bd089f6568, task_id=1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (api:52) 2018-02-12 07:51:16,275+0100 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call Image.mergeSnapshots succeeded in 0.13 seconds (__init__:573) 2018-02-12 07:51:16,276+0100 INFO (tasks/1) [storage.ThreadPool.WorkerThread] START task 1be430dc-eeb0-4dc9-92df-3f5b7943c6e0 (cmd=>, args=None) (threadPool:208) 2018-02-12 07:51:16,543+0100 INFO (tasks/1) [storage.Image] sdUUID=47b7c9aa-ef53-48bc-bb55-4a1a0ba5c8d5 vmUUID= imgUUID=ee9ab34c-47a8-4306-95d7-dd4318c69ef5 ancestor=9cdc96de-65b7-4187-8ec3-8190b78c1825 successor=8f595e80-1013-4c14-a2f5-252bce9526fdpostZero=False discard=False (image:1240) 2018-02-12 07:51:16,669+0100 ERROR (tasks/1) [storage.TaskManager.Task] (Task='1be430dc-eeb0-4dc9-92df-3f5b7943c6e0') Unexpected error (task:875) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 336, in run return self.cmd(*self.argslist, **self.argsdict) File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", line 79, in wrapper return method(self, *args, **kwargs) File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1853, in mergeSnapshots discard) File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line 1251, in merge srcVol = vols[successor] KeyError: u'8f595e80-1013-4c14-a2f5-252bce9526fd' Ala, maybe you know if there is any known issue with mergeSnapshots? The usecase here are VMs from oVirt 3.5 which got registered to oVirt 4.2. Regards, Maor On Wed, Feb 14, 2018 at 10:11 AM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Hi, also you can download them throught these links: https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD <https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD> https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb <https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb> Thanks again Best Regards Enrico Il 13/02/2018 14:52, Maor Lipchuk ha scritto: On Tue, Feb 13, 2018 at 3:51 PM, Maor Lipchuk mailto:mlipc...@redhat.com>> wrote: On Tue, Feb 13, 2018 at 3:42 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: see the attach files please ... thanks for your attention !!! Seems like the engine logs does not contain the entire process, can you please share older logs since the import operation? And VDSM logs as well from your host Best Regards Enrico Il 13/02/2018 14:09, Maor Lipchuk ha scritto: On Tue, Feb 13, 2018 at 1:48 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, I have been using ovirt for a long time with three hypervisors and an external engine running in a centos vm . This three hypervisors have HBAs and access to fiber channel storage. Until recently I used version 3.5, then I reinstalled everything from scratch and now I have 4.2. Before formatting everything, I detach the storage data domani (FC) with the virtual machines and reimported it to the new 4.2 and all went well. In this domain there were virtual machines with and without snapshots. Now I have two problems. The first is that if I try to delete a snapshot the process is not end successful and remains hanging and the second problem is that in one case I lost the virtual machine !!! Not sure that I fully understand
Re: [ovirt-users] Import Domain and snapshot issue ... please help !!!
Hi, also you can download them throught these links: https://owncloud.pg.infn.it/index.php/s/QpsTyGxtRTPYRTD https://owncloud.pg.infn.it/index.php/s/ph8pLcABe0nadeb Thanks again Best Regards Enrico Il 13/02/2018 14:52, Maor Lipchuk ha scritto: On Tue, Feb 13, 2018 at 3:51 PM, Maor Lipchuk <mailto:mlipc...@redhat.com>> wrote: On Tue, Feb 13, 2018 at 3:42 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: see the attach files please ... thanks for your attention !!! Seems like the engine logs does not contain the entire process, can you please share older logs since the import operation? And VDSM logs as well from your host Best Regards Enrico Il 13/02/2018 14:09, Maor Lipchuk ha scritto: On Tue, Feb 13, 2018 at 1:48 PM, Enrico Becchetti mailto:enrico.becche...@pg.infn.it>> wrote: Dear All, I have been using ovirt for a long time with three hypervisors and an external engine running in a centos vm . This three hypervisors have HBAs and access to fiber channel storage. Until recently I used version 3.5, then I reinstalled everything from scratch and now I have 4.2. Before formatting everything, I detach the storage data domani (FC) with the virtual machines and reimported it to the new 4.2 and all went well. In this domain there were virtual machines with and without snapshots. Now I have two problems. The first is that if I try to delete a snapshot the process is not end successful and remains hanging and the second problem is that in one case I lost the virtual machine !!! Not sure that I fully understand the scneario.' How was the virtual machine got lost if you only tried to delete a snapshot? So I need your help to kill the three running zombie tasks because with taskcleaner.sh I can't do anything and then I need to know how I can delete the old snapshots made with the 3.5 without losing other data or without having new processes that terminate correctly. If you want some log files please let me know. Hi Enrico, Can you please attach the engine and VDSM logs Thank you so much. Best Regards Enrico ___ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it <http://pg.infn.it> __ -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ -- _______ Enrico BecchettiServizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchettipg.infn.it __ smime.p7s Description: Firma crittografica S/MIME ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Import Domain and snapshot issue ... please help !!!
Dear All, I have been using ovirt for a long time with three hypervisors and an external engine running in a centos vm . This three hypervisors have HBAs and access to fiber channel storage. Until recently I used version 3.5, then I reinstalled everything from scratch and now I have 4.2. Before formatting everything, I detach the storage data domani (FC) with the virtual machines and reimported it to the new 4.2 and all went well. In this domain there were virtual machines with and without snapshots. Now I have two problems. The first is that if I try to delete a snapshot the process is not end successful and remains hanging and the second problem is that in one case I lost the virtual machine !!! So I need your help to kill the three running zombie tasks because with taskcleaner.sh I can't do anything and then I need to know how I can delete the old snapshots made with the 3.5 without losing other data or without having new processes that terminate correctly. If you want some log files please let me know. Thank you so much. Best Regards Enrico smime.p7s Description: Firma crittografica S/MIME ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Storage, extend or new lun ?
Hi All, There are other ways to avoid using two lun ? If necessary I can also shutdown the entire cluster. thanks a lot ! Bye Enrico Il 26/06/2017 12:32, Fred Rolland ha scritto: Hi, The support for refreshing the LUN size in an existing storage domain has been introduced in 3.6, so it is not relevant for you. You can add an additional LUN to an existing storage domain. Regards, Fred [1] https://www.ovirt.org/develop/release-management/features/storage/lun-resize/ On Mon, Jun 26, 2017 at 9:35 AM, Enrico Becchetti Gmail mailto:enrico.becche...@gmail.com>> wrote: Dear All, I've oVirt 3.5.3-1-1.el6 with two kind of storage , NFS and Fibre Channel. Each Hypervisor has HBA controller and Data CLutser has four Storage named: DATA_FC, DATA_NFS, EXPORT and ISO-DOMAIN. Anybody know how can I extend a DATA_FC ? Which is the best practies ? Extend LUN from HP MSA controller or adding a new lun ? if I extend lun inside HP MSA oVirt see the new size ? Enrico Thanks a lot. Best Regards ___ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Storage, extend or new lun ?
Dear All, I've oVirt 3.5.3-1-1.el6 with two kind of storage , NFS and Fibre Channel. Each Hypervisor has HBA controller and Data CLutser has four Storage named: DATA_FC, DATA_NFS, EXPORT and ISO-DOMAIN. Anybody know how can I extend a DATA_FC ? Which is the best practies ? Extend LUN from HP MSA controller or adding a new lun ? if I extend lun inside HP MSA oVirt see the new size ? Enrico Thanks a lot. Best Regards ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users