On 2024-07-10 11:27, g.vasilopou...@uoc.gr wrote:
After updating a hypervisor with qemu-kvm-9.0.0-4.el9.x86_64 live
migration stopped working with errors related to the cpu topology.
When I downgraded to qemu-kvm-9.0.0-3.el9.x86_64 migration worked
again.
Is this a known bug? Has anyone else en
On 2024-07-08 04:11, Radoslav Milanov wrote:
I think the best way forward would be
https://proxmox.com/en/
Well, Proxmox forces everyone to use Debian. So a much better
alternative would be Apache CloudStack:
https://cloudstack.apache.org/
Apache CloudStack allows you to use almost every Li
On 2024-04-15 13:32, Ankit Sharma wrote:
Now i want to upgrade storage but want to use host for storage so how
can i use and add Local storage and use it for VM's?
It has always been possible to use local storage in oVirt, you just have
to export it somehow, e.g. by using NFS.
Just a few ste
On 2023-05-12 15:34 Volenbovskyi, Konstantin wrote:
what are 'source' and 'target' ovirt engine versions?
I was attempting to perform a direct upgrade from 4.3.x to 4.5.4
(nightly).
It was said to work properly and I've done this before already,
so I wasn't expecting trouble. :)
Indeed, upd
Hi,
I was trying to restore a oVirt Engine Backup into a new Hosted Engine
appliance (as part of an upgrade), but this failed with the following
error:
--== PKI CONFIGURATION ==--
[WARNING] Failed to read or parse
'/etc/pki/ovirt-engine/keys/engine.p12'
Perhaps it was changed since last Setup.
On 2023-01-13 22:47, Frank Wall wrote:
I've made some progress, the Hosted Engine Storage Domain was
successfully imported and was successfully activated on all hosts.
Now oVirt tries to import the Hosted Engine VM, but fails with a
NullPointerException:
OK, got it working by reinstallin
Hi,
On 2023-01-10 14:53, Frank Wall wrote:
Validation of action 'AddExistingFileStorageDomain' failed for user
SYSTEM. Reasons:
VAR__TYPE__STORAGE__DOMAIN,VAR__ACTION__ADD,ERROR_CANNOT_ADD_EXISTING_STORAGE_DOMAIN_CONNECTION_DATA_ILLEGAL
I've made some progress, the Hosted
Hi Didi,
hi Michal,
could you probably provide some advice on this issue?
Any hint would be greatly appreciated.
Thanks
- Frank
On 2023-01-07 15:28, Frank Wall wrote:
Hi,
the following error message is periodically logged to engine.log when
oVirt tries to import the Hosted Engine Storage
Hi,
the following error message is periodically logged to engine.log when
oVirt tries to import the Hosted Engine Storage Domain (NFS):
Validation of action 'AddExistingFileStorageDomain' failed for user
SYSTEM. Reasons:
VAR__TYPE__STORAGE__DOMAIN,VAR__ACTION__ADD,ERROR_CANNOT_ADD_EXISTING_S
On 2022-12-13 12:29, Murilo Morais wrote:
Unfortunately, I haven't found anything like this.
At least this type of event didn't happen again, but I just can't find
anything in the logs that justifies these reboots, I've read everything
line by line, if anything was recorded there it passed my eye
On 2022-11-21 19:56, Alex McWhirter wrote:
I have some manpower im willing to throw at oVirt, but i somewhat need
to know if what the community wants and what we want are in line.
That's actually great news! I appreciate that you are reaching out to
the community to get early feedback.
4. som
Hi Didi,
thanks for keeping us updated. However, I'm concerned...
Ultimately, the future of oVirt lies in the hands of the community. If
you, as a community member, use and like oVirt, and want to see it
thrive, now is the best time to help with this!
I don't want to be rude, but this sounds
On 2022-06-03 21:34, Pavel Mlčoch wrote:
Know anybody which CPU type can be used for Athlon5350 or how to solve
this error?
You can check the supported CPU type by running the following command:
virsh -r capabilities | grep model
Regards
- Frank
__
To answer my own post...
On Mon, Mar 25, 2019 at 02:45:18PM +0100, Frank Wall wrote:
> I've been using oVirt for years and have just discovered a rather strange
> issue that causes EXTREME high iowait when using a NFSv3 storage.
>
> 3145728000 bytes (3.1 GB) copied, 141.649 s, 22
Hi,
I've been using oVirt for years and have just discovered a rather strange
issue that causes EXTREME high iowait when using a NFSv3 storage.
Here's a quick test on a CentOS 7.6 VM running on any oVirt 4.2.x node:
(5 oVirt nodes, all showing the same results)
# CentOS VM
$ dd if=/dev/zero of=T
Hi Simone,
thanks for your quick reply, much appreciated!
On Tue, Nov 28, 2017 at 10:04:10AM +0100, Simone Tiraboschi wrote:
> what happened to you is exactly https://bugzilla.redhat.com/1317125 which
> has been closed as wontfix.
I've seen this bugzilla issue, but TBH I was a bit baffled. Back
Hi,
when running "hosted-engine --deploy" on a fresh CentOS 7.4 with pre-built
network configuration (and ovirtmgmt bridge), the following error occurs:
2017-11-27 19:08:12 DEBUG otopi.context context._executeMethod:142 method
exception
Traceback (most recent call last):
File "/usr/lib/python2
On Mon, Jun 26, 2017 at 10:51:52AM +0200, InterNetX - Juergen Gotteswinter
wrote:
> > 2. Should I migrate from XenServer to oVirt? This is biased, I know, but
> > I would like to hear opinions. The folks with @redhat.com email
> > addresses will know how to advocate in favor of oVirt.
>
> in term
On Fri, Jul 22, 2016 at 03:58:56PM -0500, Blaster wrote:
> I did try a clean install. Both an upgrade and a fresh install cause a blue
> screen. How do I pin point the blue screen?
In my case I could solve this issue by changing the number of (virtual)
CPUs to only 1 for the Windows 10 VM. The Wi
Hi Michal,
On Tue, Feb 09, 2016 at 12:04:44PM +0100, Michal Skrivanek wrote:
> what do you mean ???forces
> you should be able to switch to cirrus (which forces vnc) or even use just
> the vnc on qxl
on the affected VMs the following error occurs when trying to start them:
Error while execu
Hi,
with oVirt 3.5 (and prior) it was possible to set the default console like this:
# engine-config -s ClientModeVncDefault=NoVnc
Unfortunately, starting with oVirt 3.6 this doesn't seem to work anymore.
The root cause seems to be that I am no longer allowed to use the previous
Video Type for
On Tue, Jan 05, 2016 at 02:27:26PM -0500, Martin Perina wrote:
> please make sure that on your machine you installed correct oVirt
> repositories [1]. slf4j package is available for EL6 in oVirt 3.6
> repo [2].
Thanks for the pointer. And... well, sorry for wasting your time. It was not
working fo
On Tue, Jan 05, 2016 at 05:37:08PM +0200, Yedidyah Bar David wrote:
> Perhaps to aid debugging you can try this, but _do_not_ press Enter:
>
> yum --disableplugin=versionlock update ovirt-engine
>
> Kill it (or reply 'no').
>
> What does it output?
Basically the same dependency error. I've atta
On Sun, Jan 03, 2016 at 03:18:40PM +0100, Frank Wall wrote:
> [ INFO ] Checking for product updates...
> [ ERROR ] Yum: [u'ovirt-engine-3.6.1.3-1.el6.noarch requires slf4j >= 1.7.0',
> u'vdsm-jsonrpc-java-1.1.5-1.el6.noarch requires slf4j >= 1.6.1']
> [ I
Hi,
I've just tried to upgrade my ovirt-engine 3.5.5 which is still running on EL6,
but it failed due to a dependency error regarding slf4j:
# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packagin
Hi Alan,
On Thu, Dec 24, 2015 at 10:37:17AM -0800, Alan Murrell wrote:
> Are dummy interfaces still supported in 3.6?
I'm running ovirt 3.6 AiO and dummy interfaces are working just fine.
Instead of modifying oVirt's python source files, I'd recommend you
rename the dummy interface(s) to match t
Hi Phil,
On Mon, Nov 02, 2015 at 04:38:14PM +, Phil Daws wrote:
> have attempted to downgrade noVNC (novnc-0.4-7.el6.noarch) but it still down
> not work.
I was hit by the same issue. If I remember correctly I had to do the following
to resurrect noVNC (on EL7):
wget
http://cbs.centos.org/k
Hi,
On Sat, Oct 03, 2015 at 11:58:09AM +0330, S.Mohammad Emami Razavi wrote:
> How can i check oVirt support for HP servers particularly Gen9?
> Does anybody test oVirt with new generations of HP server?
> Sincerely.
if you plan to deploy oVirt on either Red Hat Enterprise Linux (RHEL) or on
Cent
On Mon, Mar 02, 2015 at 11:25:38AM +0100, Frank Wall wrote:
> On Sun, Mar 01, 2015 at 02:26:12AM -0500, Yedidyah Bar David wrote:
> > You wrote '"shutdown -h now" on the hosts'. What happens if you shutdown
> > just one of them and then wait a bit? Does it get st
On Sun, Mar 01, 2015 at 02:26:12AM -0500, Yedidyah Bar David wrote:
> You wrote '"shutdown -h now" on the hosts'. What happens if you shutdown
> just one of them and then wait a bit? Does it get started too?
>
> Are you certain that 'shutdown -h now' worked on these hosts before the
> setup - that
Hi Ryan,
On Thu, Nov 06, 2014 at 09:10:32AM -0700, Groten, Ryan wrote:
> I went through this a couple months ago. Migrated my hosted-engine from
> one NFS host to another. Here are the steps that I documented from the
> experience.
just wanted to let you know that my migration went flawlessly
On Wed, Nov 05, 2014 at 08:11:39AM +0100, Jiri Moskovcak wrote:
> On 11/04/2014 03:52 PM, Alastair Neil wrote:
> > So is this the workflow?
> >
> > set the hosted-engine maintenance to global
> > shutdown the engine VM
> > make changes via virsh or editing vm.conf
> > sync changes t
Hi Sven,
On Thu, Oct 30, 2014 at 02:35:54PM +0100, Sven Kieske wrote:
> I just wanted to ask if there are some plans to also
> support other automation tools like salt, chef, cfengine
> or others, because puppet is imho not a good tool for
> large environments performance wise.
actually Foreman h
Hi Doron,
On Sun, Oct 19, 2014 at 11:42:47AM -0400, Doron Fediuck wrote:
> KSM is controlled by MoM, which gets its policy from the engine through
> VDSM. MoM will call ksm directly as needed when needed. If you choose
> to disable it the policy needs to get updated.
> Can you please check your mo
On Thu, Oct 09, 2014 at 05:08:56PM -0300, Amador Pahim wrote:
>
> On 10/09/2014 04:31 PM, Frank Wall wrote:
> > while testing oVirt 3.5 RC I've came across this cluster setting:
> > Optimization -> KSM control -> [X] Enable KSM
> > [...]
> > But KSM
Hi Markus,
On Thu, Oct 09, 2014 at 07:43:45PM +, Markus Stockhausen wrote:
> Have a look at redhat bugzilla #1114226. It should give an
> idea what is happening behind the scenes.
well, even with reduced CPU load the impact of KSM is still big in my case.
Though, I'm interested to see the re
Hi,
while testing oVirt 3.5 RC I've came across this cluster setting:
Optimization -> KSM control -> [X] Enable KSM
I guess it's related to Kernel Same-page Merging.
Since KSM is a bad idea in my case (really slow CPUs), I've disabled
this Cluster setting, expecting oVirt to disable KSM on each
On Wed, Oct 08, 2014 at 11:39:44PM +0200, Frank Wall wrote:
> Just for the records, the latest update to patternfly1-1.0.5-1.el6.noarch
> broke the oVirt Engine Admin GUI for me.
Oh, it's late. I was talking about the update to patternfly1-1.1.0-1.el6.noarch.
Rega
On Mon, Sep 29, 2014 at 08:43:10AM -0400, Greg Sheremeta wrote:
> Switch over to https://copr.fedoraproject.org/coprs/patternfly/patternfly1/
> and run 'yum update patternfly1'
> and you'll be all set.
Just for the records, the latest update to patternfly1-1.0.5-1.el6.noarch
broke the oVirt Engin
On Tue, Sep 09, 2014 at 03:09:02PM +0100, Dafna Ron wrote:
> qemu would pause a vm when doing extend on the vm disk and this would
> result in INFO messages on vm's pause.
>
> looks like this is what you are seeing.
For the records, I'm using thin provisioned disks here.
Do you mean an internal
Hi,
today I've noticed that one of my VMs was paused. I took a look
at the engine.log and found only this:
2014-09-09 04:00:09,017 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-46) VM XXX 8ad326be-5103-498a-a11d-0ea1eee4bbf4
moved from Up --> Pause
On Tue, Jul 22, 2014 at 11:21:46AM -0700, pixelfairy wrote:
> can novnc be the default? i like native vnc and spice clients too, but
> for new users this would be much easier. esp for mac (and mobile
> device) users who cant get remoteviewer.app working.
NoVNC has some limitations. You may set it
On Thu, Mar 06, 2014 at 09:20:25AM -0500, Eli Mesika wrote:
> I had to test the upgrade from 3.3.4 to 3.4
> I had installed and tested for sanity 3.3.4 but failed to upgrade it to 3.4
> on CentOS
> Opened https://bugzilla.redhat.com/show_bug.cgi?id=1073487
FWIW, I've updated an All-in-one host f
Hi Andrew,
On Mon, Feb 17, 2014 at 07:57:33PM +1100, Andrew Lau wrote:
> Is anyone using Foreman with oVirt 3.4?
>
> Post upgrade, I appear to be having some issues with Foreman reporting "
> undefined method `text' for nil:NilClass"
this issue was reported to Foreman:
http://projects.theforema
Hi Doron,
On Tue, Feb 11, 2014 at 11:49:30AM -0500, Doron Fediuck wrote:
> This is still in the works, but the right way to retire a host
> is first to put it into local maintenance (there's CLI for it
> and hopefully by 3.4 GA we will do it when you use the UI to put
> a host into maintenance).
>
Hi,
I've retired a host that was part of a hosted-engine setup. How do I
remove this host from my hosted-engine HA setup?
I have retired "host01" and would like to remove it completely:
[root@host03 ~]# hosted-engine --vm-status
--== Host 1 status ==--
Status up-to-date : Fals
Hi Christopher,
On Wed, Jan 29, 2014 at 11:33:21AM +, Dresel Christopher wrote:
> What is the procedure for uploading isos to local storage domains?
> Are there other options than using the engine-iso-uploader?
you can manually copy/rsync your files directly to the locally
mounted directory
On Tue, Jan 28, 2014 at 09:47:11AM +, Dan Kenigsberg wrote:
> Frank, can you tell how did it reach your ovirt-3.4 installation? Did
> you pull a nightly build of Vdsm ?
Indeed, I'm currently testing vdsm nightly along with oVirt-Engine 3.4 Beta:
ovirt-engine:
ovirt-engine-3.4.0-0.5.beta1.el6.
Hi,
still testing 3.4 and I'm unable to save a node's
network configuration in webadmin:
Error while executing action Setup Networks: Unexpected exception
My configuration on the ovirt node:
- manually added net2 bridge, attached to eth1
My configuration in ovirt-engine webadmin:
- added new n
On Sun, Jan 26, 2014 at 04:12:05PM -0500, Yedidyah Bar David wrote:
> Please report about any results/issues. If it fails, you can try first, after
> removing from the engine,
> # yum remove libvirt vdsm
> # rm -rf /etc/vdsm /etc/libvirt
>
> (or, of course, just reinstall if you do not care).
I r
On Sun, Jan 26, 2014 at 03:54:34PM -0500, Yedidyah Bar David wrote:
> Indeed. Might it be possible to not just move to maintenance but remove
> it from the engine? Then you can try again deploy as a second host.
I'll give it a spin. The host is scheduled for reinstallation tomorrow.
> Well, this
On Sun, Jan 26, 2014 at 10:40:18PM +0200, Itamar Heim wrote:
> > thanks for the pointer. The documentation at [1] describes the
> > required steps to setup a second node. Unfortunately it failed
> > for me because my second node was added to the cluster before [2].
>
> why would both your hosts ha
Hi Itamar,
On Sun, Jan 26, 2014 at 07:13:35PM +0200, Itamar Heim wrote:
> hosted engine supports running on *multiple* nodes, providing out of the
> box HA between them.
> the setup should ask you if this is the second host and take care of all
> the right things to copy.
thanks for the pointer
Hi Itamar,
On Sun, Jan 26, 2014 at 06:21:03PM +0200, Itamar Heim wrote:
> > OK, I'll give this a try. Just to be sure: If I move the
> > hosted-engine VM to a different storage domain from the
> > command line, will this storage domain still be visible
> > from the webadmin? Or will it be hidden,
Hi Itamar,
On Sat, Jan 25, 2014 at 11:48:00PM +0200, Itamar Heim wrote:
> > 2.) hosted-engine VM device are not visible in GUI
> > The disk and network devices are not visible in the
> > admin portal. Thus I'm unable to change anything.
> > Is this intended? If so, how am I supposed to make change
Hi,
finally I've got the new hosted-engine feature running on
RHEL6 using oVirt 3.4 BETA/nightly. I've come across a few
issues and wanted to clarify if this is the desired
behaviour:
1.) hosted-engine storage domain not visible in GUI
The NFS-Storage I've used to install the hosted-engine
is no
On Thu, Jan 23, 2014 at 09:13:14AM -0500, Brad House wrote:
> Yep, I get the _same_ exact issue. Please see my e-mail chain from
> yesterday with the subject line:
> "oVirt 3.4.0 beta - Hosted Engine Setup -- issues"
Thanks for the pointer, I guess I missed that :-( As discussed on
IRC the issue
Hi Sandro,
On Thu, Jan 23, 2014 at 02:28:29PM +0100, Sandro Bonazzola wrote:
> Do you have the same issue you've with nightly?
on BETA the hosted-engine setup fails (earlier) with another issue that seems
to be
fixed in NIGHTLY:
2014-01-23 13:50:58 DEBUG otopi.plugins.otopi.services.rhel rhel.s
Hi,
I'm currently trying to setup a hosted-engine on a RHEL6 host
with nightly repository (because 3.4 BETA didn't work either):
[root@host ~]# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor and
create a VM where you h
On Thu, Jan 16, 2014 at 12:26:37PM +0500, Nauman Abbas wrote:
> For some reason, the password I put during installation is not working.
> I've tried the following combinations
No reason to use trial and error here. There's always the excellent
RHEV REST API Guide to the rescue:
https://access.red
On 2013-12-11 8:18, Roy Golan wrote:
how was this engine installed, upgraded in time? nightly or with
official releases?
This is my complete release timeline for this host/engine:
Sep 02 17:50:37 Installed: ovirt-engine-3.3.0-0.7.rc2.fc19.noarch
Sep 13 22:09:41 Updated: ovirt-engine-3.3.0-3.fc
Hi Roy,
On 2013-12-11 8:18, Roy Golan wrote:
how was this engine installed, upgraded in time? nightly or with
official releases?
I'd bet it was installed from an official release, but it seems
like it was RC2 back then:
Sep 02 17:50:18 Installed: ovirt-engine-setup-3.3.0-0.7.rc2.fc19.noarch
2
On 2013-12-10 14:29, Michal Skrivanek wrote:
So it did run. It was supposed to change the id. Is it possible
you so ehow overwrote it manually or anything like that?
No. It is a fresh install from september and I tried hard
to follow oVirt's guidelines ;-)
I did some manual deletions in engine
Hi Roy,
On 2013-12-10 8:24, Roy Golan wrote:
can you run this so we would know if the script ever ran on your env?
psql engine postgres -c "select * from schema_version where version
='03030660';"
engine=# select * from schema_version where version ='03030660';
-[ RECORD 1 ]+--
Hi Tomas,
On 2013-12-09 14:22, Tomas Jelinek wrote:
2: spiceSupportMatrix.get(osId) returned null. [...]
I would guess this is the issue. To verify this could you please paste
here the content of all .../osinfo.conf.d/*.properties and also the
result of
"select os, vm_name from vm_static" DB que
Hi Tomas,
On 2013-12-09 11:12, Tomas Jelinek wrote:
Just to make sure to avoid unnecessary compilation: this logs
are from 3.3.2 BETA1, right?
yes, it's 3.3.2 BETA1 as of yesterday:
ovirt-engine-3.3.2-0.1.beta1.fc19.noarch
ovirt-engine-backend-3.3.2-0.1.beta1.fc19.noarch
ovirt-engine-cli-3.3.
Hi Tomas,
Am 2013-12-09 10:47, schrieb Tomas Jelinek:
could you please attach the frontend logs from FF if there
are any exceptions?
not much, but this is what I got:
http://pastebin.com/5p3PbSRG
Thanks
- Frank
___
Users mailing list
Users@ovirt.o
Hi,
I'm experiencing a strange UI bug in the Amdin Portal. The
"Virtual Machines" tab is unusable in serval ways:
- when selecting a VM, all buttons are greyed-out, except "New VM"
- you cannot power on, power off, open console or edit a VM
- when selecting a VM, the VM-specific tabs do not appe
On 2013-11-04 18:54, Bob Doolittle wrote:
If there's any diagnostic info anybody would like me to
acquire first, please speak up asap.
It's always a good idea to keep a copy of /var/log/vdsm/vdsm.log
from oVirt node and /var/log/ovirt-engine/engine.log from
oVirt engine.
Regards
- Frank
On 2013-11-04 18:06, Bob Doolittle wrote:
However, my ISO_DOMAIN remains unattached. If I select it, select its
Data Center tab, and click on Attach, it times out.
Try putting the oVirt node in maintenance mode, wait,
and activate it again. Every once in a while this helped
me solve strange pro
Hi Martin,
On 2013-11-04 11:12, Martin Sivak wrote:
we do not currently have anything in the engine that would allow you
to do this. If you create an oVirt RFE bug for it it would make it
easier for us to add the feature and track the progress.
good advice, here we go:
https://bugzilla.redhat.
Hi,
recently I've noticed that ksmd is using quite a lot CPU on
my oVirt node. While I have plenty RAM, my CPU is way slow.
Thus ksmd is eating up the most limited ressource here.
Is it supported to use custom settings for ksmd? I've noticed
that it is handled by MoM: /etc/vdsm/mom.d/03-ksm.poli
Hi Moti,
On 17.10.2013 15:08, Moti Asayag wrote:
Could you try disabling the filter, restart the vms and re-run the test
?
1. On the ovirt-engine run: engine-config -s
EnableMACAntiSpoofingFilterRules=false --cver=3.3
(if you're using ovirt-engine 3.2, make sure to specify it in the
--cver=
Hi Moti,
On 17.10.2013 08:04, Moti Asayag wrote:
I used iperf for testing multicast between the vms. See
http://iperf.fr/#multicast
for the exact commands.
thanks, I did a quick test with iperf with a good result (445 out of 446
datagrams could be received). But still pfSense/FreeBSD CARP/uCA
On 17.09.2013 15:41, Moti Asayag wrote:
I've tested a multicast traffic between VMs which worked fine to me.
The test made between two VMs running on different hosts, connected
to the same switch.
OK, I found a secure way to test multicast communication:
(see http://www.linuxproblems.org/wiki/H
Hi Moti,
On 17.09.2013 15:41, Moti Asayag wrote:
I've tested a multicast traffic between VMs which worked fine to me.
The test made between two VMs running on different hosts, connected
to the same switch.
would you please provide some details about how you tested the
multicast traffic between
Hi Yedidyah,
On 17.09.2013 09:32, Yedidyah Bar David wrote:
What is required to enable guest-to-guest multicast communication
on an oVirt node?
Are they on the same virtual network/bridge?
Did you check iptables? You can add a rule to log such things and
see if it was iptables that blocked it
On 15.10.2013 11:06, Karli Sjöberg wrote:
- Display: not interesting if I just want to see the overview
- Status: redundant, the icon in the first row already tells me
about this
Perhaps. But remember that "Shut down" and "Shutting down" actually
have the same icon. If the status column gets d
Hi Malini,
On 14.10.2013 19:06, Malini Rao wrote:
Here is a proposal for updating the ovirt look and feel to
give it a fresh and modern look - http://www.ovirt.org/Ovirt_LAF.
Your feedback and input is invited.
I think your proposal looks way better than the current
oVirt interface and I think
Hi Yair,
On 15.09.2013 21:19, Yair Zaslavsky wrote:
I verified that commit c54353b11fb9ac2cb59cbc3e04b58e9114cbecba solved
this issue as well.
I can confirm that the issue is solved. Thank you!
ovirt-engine-3.3.0-4.fc19.noarch
ovirt-engine-backend-3.3.0-4.fc19.noarch
ovirt-engine-cli-3.3.0.4-
Hi,
I'm trying to use the VRRP protocol between two VMs, but the multicast
traffic never gets through. On the oVirt host I can see the VRRP
advertisements coming in for both VMs:
aio:~# tcpdump -n -X -i vnet3 net 224.0.0.0/4
listening on vnet3, link-type EN10MB (Ethernet), capture size 65535
Hi Andrew,
On 06.09.2013 03:42, Andrew Lau wrote:
Just for reference how'd you empty the async_tasks?
on my oVirt engine I use the following steps to empty async_tasks:
aio:~# su -l postgres
-bash-4.2$ psql
psql (9.2.4)
postgres=# \c engine
engine=# select task_id from async_tasks;
task_
Hi Laszlo,
On 27.08.2013 16:01, Laszlo Hornyak wrote:
Thank you Frank, I will investigate this issue.
any update on this issue? It's 100% reproducible, even on a new
installed RC2 host.
Thanks
- Frank
___
Users mailing list
Users@ovirt.org
http:/
On 02.09.2013 20:03, Alon Bar-Lev wrote:
Yes[1], you probably need newer sdk.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1002749
Thanks for the pointer to BZ. I've cherry-picked a newer version from
nightly repo
(ovirt-engine-sdk-python-3.3.0.5-1.20130828.gitdbe6e62.fc19.noarch) and
wa
Hi,
setting up a new installation of 3.3 RC2 fails:
- installed Fedora 19
- setup ovirt repo, enable beta repo
- install all-in-one rpms
- run engine-setup
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Database name : engine
Hi René,
On 01.09.2013 19:55, René Koch wrote:
I sometimes have (had) the same issues with all-in-one-setups, so I
don't use local storage in all-in-one-setup anymore.
thanks for the hint, I'll definitely give this a try if the problem
persists. As of yet I found that completely disabling all
On 26.08.2013 09:36, Antoni Segura Puimedon wrote:
Note that you can create dummies with any name you want with
ip link add drummy type dummy
So you could potentially create your own dummy_250, for example.
This is quirky :-( The usual way to add dummy interfaces would be to
create /etc/modpro
On 01.09.2013 01:28, Frank Wall wrote:
OK, for some reason it got stuck trying to start "iscsid" and
"multipathd". I was able to solve the issues with these services and
now the real error message is visible:
Did some more fiddling... I removed my /etc/multipath.conf and s
On 01.09.2013 00:56, Frank Wall wrote:
Sep 01 00:39:19 aio.example.com systemd-vdsmd[1587]: Starting iscsid...
Sep 01 00:40:48 aio.example.com systemd[1]: vdsmd.service operation
timed out. Terminating.
OK, for some reason it got stuck trying to start "iscsid" and
"multipathd&
On 01.09.2013 00:00, Frank Wall wrote:
2013-08-31 23:53:59,325 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-54) Command GetCapabilitiesVDS
execution failed. Exception: VDSNetworkException:
java.net.ConnectException: Connection refused
Hi,
my all-in-one host is stuck in unresponsive state, no matter what I try.
Found this error in my engine.log:
2013-08-31 23:53:59,325 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
(DefaultQuartzScheduler_Worker-54) Command GetCapabilitiesVDS execution
failed.
Hi Laszlo,
On 27.08.2013 14:24, Laszlo Hornyak wrote:
If I understand correctly, this is what happens to your installation,
the AddVmFromTemplate command goes to fail and engine tries to
compensate, and upon successful compensation you get VM records
removed from DB and storage cleaned up.
jus
On 26.08.2013 23:40, Frank Wall wrote:
Every time I reboot ovirt-engine the VMs will disappear. No matter
what I do before rebooting ovirt-engine - set storage to maintenance,
set host to maintenance - it's always the same.
On IRC #ovirt I was asked to have a look at the "async_ta
On 09.08.2013 09:48, Jakub Bittner wrote:
Iam running ovirt 3.3.0.beta1 on centos 6,4 and all our VMs
disappeared from VMs tab. Nodes running on centos too. Repeating
problem in log is:
I have the same problem, but with a slightly different setup:
- fresh install of Fedora 19 (all updates inst
Hi,
just installed oVirt 3.3 and noticed that the suggestion from this
thread was included:
--- /usr/lib64/python2.7/site-packages/vdsm/config.py.orig 2013-03-14
11:32:54.0 +0100
+++ /usr/lib64/python2.7/site-packages/vdsm/config.py 2013-05-16
16:34:27.722959670 +0200
@@ -38,7
Hi Lior,
Am 16.05.2013 16:12, schrieb Lior Vernia:
Search for a variable called "fake_nics", it should exist for 3.2. By
default it is empty, but you may define a pattern for fake NIC names
to
be passed to the engine (in your case probably "dummy*"). Restart the
vdsm daemon and everything shou
Hi Asaf,
Am 13.05.2013 15:05, schrieb Assaf Muller:
Without the ability to control the networking devices in your
vicinity and setup VLANs, what you're trying to do isn't supported via
oVirt.
I was already guessing that it is not supported. Thanks for the
"official" confirmation.
* Create
Hi René,
Am 13.05.2013 09:56, schrieb René Koch (ovido):
When using multiple logical networks on 1 physical nic you
will need most likely VLAN tagging, as all vm networks are
configured as a bridge in oVirt.
unfortunately, using VLAN tagging is not an option for me,
because I'm not the maintai
Hi,
I'm using oVirt 3.2 on a single hosts with only one NIC. Currently
there is only the ovirtmgmt network configured. But I need to add
more networks, especially some internal networks like 192.168.x.y/24
need to be usable for VMs.
From the oVirt Admin Portal this does not seem to be possible.
On Mon, Apr 29, 2013 at 04:44:22PM +0200, Frank Wall wrote:
> 2013-04-29 16:38:33,744 INFO
> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> (DefaultQuartzScheduler_Worker-9) Received a cdrom Device without an address
> when processing VM 658ca53d-12cf-4b03-973d-a0d2cdf5
1 - 100 of 118 matches
Mail list logo
