On 03/30/2012 06:58 PM, Nathan Stratton wrote:
On Fri, 30 Mar 2012, Livnat Peer wrote:
On 29/03/12 22:16, Nathan Stratton wrote:
Is there a way to configure MTU on a guest by guest basis? All our bond
interfaces are configured as 9000 byte MTU, but we have a few guests
that don't support
On 04/04/2012 05:15 AM, Andrey Falko wrote:
Hi everyone,
One of the requirements behind the system that I am attempting to build
is that there should be no local storage.
i didn't understand if you don't want to use local storage but trying to
use it?
I’ve noticed that I cannot add
On 04/04/2012 09:42 PM, Andrey Falko wrote:
One of the requirements behind the system that I am attempting to
build is that there should be no local storage.
i didn't understand if you don't want to use local storage but trying to use it?
Sorry, that was a typo on my part. There should be
On 04/04/2012 01:13 PM, Alex Drahon wrote:
Hello all,
I'm trying to import VMs from a Centos5/KVM host to ovirt using
virt-v2v. I used this command:
virt-v2v -ic qemu+ssh://root@virthost1.mydomain.local/system -o rhev -os
virthost3.mydomain.local:/exports/exp --network ovirtmgmt
a bug?
Of course it fails if ovirt-engine doesn't generate one.
On Thu, Apr 5, 2012 at 11:44 AM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/05/2012 01:42 PM, Alex Drahon wrote:
Here's what I found in engine.log
are you sure you are not trying to add
so maybe Eli can help,
Eli do you know why Alex is getting the pk_vm_device?
in any way can you post the OVF?
On Thu, Apr 5, 2012 at 12:12 PM, Shahar Havivishah...@redhat.com wrote:
On 05.04.12 13:56, Itamar Heim wrote:
On 04/05/2012 01:50 PM, Alex Drahon wrote:
I tried
- but not needed for first phase of using this.
2. using gluster as a posix fs - vdsm side is ready, and iirc, engine
done by laszlo who can share when test patches can be used for testing this
3. integrating both together - a bit later :)
-Original Message-
From: Itamar Heim [mailto:ih
On 04/10/2012 05:57 PM, Rahul Upadhyaya wrote:
Hi Folks,
I wasn't able to access the console via the Admin portal. As I
learnt there is a requirement of Spice-xpi plugin. I could not find
the plugin for firefox/chrome on windows/ubuntu. However, when I
tried from firefox on a
On 04/11/2012 02:49 PM, Rahul Upadhyaya wrote:
Hi Itamar and others,
In reference to the problem that I had posted yesterday you (Itamar) had
asked for the spice log on my machine. I have attached the spice log
that gets generated each time when I start the console (gets generated
under
to host
running the VM)
On Wed, Apr 11, 2012 at 6:19 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/11/2012 03:48 PM, Rahul Upadhyaya wrote:
Hi Itamar,
During the installation of the ovirt-engine I have followed the
steps
-xpi is running on the same server running the
management engine. So I can you ping that private IP address from the
client I am trying to connect with spice.
On Wed, Apr 11, 2012 at 6:34 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/11/2012 04:00 PM, Rahul Upadhyaya
the console directly without the browser?
say, via the ovirt shell console command?
On Wed, Apr 11, 2012 at 7:17 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/11/2012 04:41 PM, Rahul Upadhyaya wrote:
hi Itamar,Spice-devel team,
Adding some more info
On 04/12/2012 01:01 PM, Martin Hovmöller wrote:
It looks to me like the options are dropped, especially since the
fenceNode line from the hypervisor says options=. What's going on here?
When I try to save the power management configuration, the Options-field
is empty the next time I go to Edit
On 04/12/2012 09:37 PM, Sharad Mishra wrote:
doesn't look like its dns issue, I can run ldapsearch from the command
line.
are you using simple or kerberos modes?
ldap search is kerberos based, manage domains iirc is keberos as well mostly
___
Users
On 04/13/2012 12:52 AM, Li, David wrote:
Hi,
I have two problems with hosts in the ovirt-engine:
1.I couldn’t remove the host. The remove is grayed out in the menu. I
rebooted and did everything I could. How do I get around this problem
without having to reinstall the engine?
did you move
On 04/13/2012 11:09 AM, Martin Hovmöller wrote:
On Thu, Apr 12, 2012 at 12:41 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/12/2012 01:01 PM, Martin Hovmöller wrote:
It looks to me like the options are dropped, especially since the
fenceNode line
)
- David
From: Itamar Heim [ih...@redhat.com]
Sent: Thursday, April 12, 2012 10:08 PM
To: Li, David
Cc: users@ovirt.org
Subject: Re: [Users] Host problems
On 04/13/2012 12:52 AM, Li, David wrote:
Hi,
I have two problems with hosts in the ovirt-engine:
1.I
On 04/13/2012 06:30 PM, Thomas Thompson wrote:
Hello. I have a quick question regarding FreeIPA and oVirt.
Back at the end of Feb, there was some discussion on a bug w/ using
FreeIPA and oVirt (oVirt seeing the defaultnamingcontext attribute and
assuming it's AD rather than FreeIPA) on this
On 04/13/2012 06:32 PM, Christian Hernandez wrote:
Hello,
I am getting an error trying to add a host to oVirt where the Status
says Install Failed
Here is (a snipet ) the log from the oVirt server
(/var/log/ovirt/enginge.log)...I can provide more if needed
--Christian
On Fri, Apr 13, 2012 at 9:52 AM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/13/2012 06:32 PM, Christian Hernandez wrote:
Hello,
I am getting an error trying to add a host to oVirt where the
Status
says Install Failed
09:26:49 DEBUG End VDS Validation
/
On Fri, Apr 13, 2012 at 10:00 AM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/13/2012 07:58 PM, Christian Hernandez wrote:
are you sure it is enabled at bios level?
did you perform a cold boot post
be unrelated to the adding host problem.
the host and iso domain problems are not supposed to be connected to
each other.
- David
From: Itamar Heim [ih...@redhat.com]
Sent: Friday, April 13, 2012 8:50 AM
To: Li, David
Cc: users@ovirt.org
Subject: Re: [Users
you may
want to try nightly after all to help the testing effort.
On Fri, Apr 13, 2012 at 12:45 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/13/2012 06:30 PM, Thomas Thompson wrote:
Hello. I have a quick question regarding FreeIPA and oVirt
On 04/13/2012 09:37 PM, Dominic Kaiser wrote:
I have a server I want to use that has 8 storage bays and is an 8 core
intel xeon 16 gigs of ram. I want to use the board and processors for
virtual machines and storage separately. First can I do this? Second I
am using ovirt node and it has
On 04/16/2012 06:20 PM, Mike Burns wrote:
On Mon, 2012-04-16 at 18:13 +0300, Yaniv Kaul wrote:
On 04/16/2012 06:09 PM, Mike Burns wrote:
On Fri, 2012-04-13 at 16:12 -0400, Ian Levesque wrote:
Hi Juan,
On Apr 13, 2012, at 2:57 PM, Juan Hernandez wrote:
On 04/13/2012 07:20 PM, Ian Levesque
On 04/17/2012 12:47 PM, Martin Hovmöller wrote:
I can't live migrate the vm's in my cluster:
012-04-17 04:06:39,728 INFO
[org.ovirt.engine.core.bll.MigrateVmCommand] (pool-5-thread-48)
Running command: MigrateVmCommand internal: false. Entities affected :
ID:
On 04/17/2012 06:34 PM, Li, David wrote:
My ovirt-node host was created and approved in ovirt-engine.
I couldn't activate an new ISO domain in the ovirt-engine if it's not
existing. It could be attached to the data center though. On the other
hand, I have no problem adding a data domain.
How
On 04/18/2012 06:54 PM, Dominic Kaiser wrote:
It adds an iscsi target on install. Or am I wrong what is this:
no, unless we are not talking about the same thing.
On Wed, Apr 18, 2012 at 11:15 AM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 04/18/2012 05:52 PM
--0.0.0.0-8080-1) Failed to run RegisterVds.
- David
From: Itamar Heim [ih...@redhat.com]
Sent: Tuesday, April 17, 2012 9:57 AM
To: Li, David
Cc: users@ovirt.org
Subject: Re: [Users] Can't create ISO domain
On 04/17/2012 06:34 PM, Li, David wrote:
My
On 04/23/2012 03:00 AM, Jason Lawer wrote:
I just tried to run engine-setup and got the following error.
[root@manager ~]# engine-setup
Error: current locale (en_AU.UTF-8) is not supported. supported locales
are: en_US.UTF-8,en_US.utf-8,en_US.utf8
Please check log file
On 04/22/2012 05:43 AM, Mike Burns wrote:
Reminder: Meeting moved this week to Tuesday 2012-04-24 due to Israel
Independence Day.
This mail is a call for topics for the 2012-04-24 Weekly Sync meeting.
Standing Agenda Topics:
* Status of Next Release
it seems some of the features which
look for information on things like this?
well, the wiki, google and git log / gerrit patch queue
google covers wiki and git/gerrit log:
https://www.google.com/search?q=ovirt+locale+check
Jason
On 23/04/12 3:08 PM, Itamar Heim wrote:
On 04/23/2012 03:00 AM, Jason Lawer wrote:
I just tried
On 04/24/2012 02:42 AM, Leslie Hawthorn wrote:
(N.B.: This message was copied to users@ovirt.org but I am not clear if
my subscription was approved. If you happen to note that this message
did not get to that list, let me know.)
Hello everyone,
I am a new(ish) hire at Red Hat working on Carl
On 04/26/2012 06:12 AM, Gmail wrote:
hello，dears：
i have a ovirt-engine with two node
172.30.0.229ovirt-engine.local
172.30.0.231ovirt-node-1.local
172.30.0.232ovirt-node-2.local
When i use the live migration ，migrate a vm from node2 to node1 , it failed with the
error code 12
On 04/26/2012 05:59 AM, Hui Kai Ran wrote:
Hi, all
I learned some query language from REST API User Guid to get a
reduced result list, for example:
/api/storagedomains?search=name%3D*iso*
it works. but the following querys do not work
/api/storagedomains?search=type%3Diso
of storage domain (NFS, block (iscsi/fc), local)?
The changeable options are:
Size
Disk Type (System, Data)
Interface (ide, virtio)
Format (preallocated, thin provision)
Then two check boxes for
bootable
wipe upon deletion
On Tue, May 1, 2012 at 1:09 AM, Itamar Heim ih...@redhat.com
, since you are using a
file system based storage domain.
and raw gives better performance.
(a snapshot would be qcow2 of course)
On Tue, May 1, 2012 at 4:18 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 05/01/2012 10:52 PM, Gary Scarborough wrote:
I am using
On 05/03/2012 05:37 AM, Cao,Bing Bu wrote:
Hi,
I want to install the ovirt-engine from rpm package.
Using the guide on wiki page:
http://www.ovirt.org/wiki/Installing_ovirt-engine_from_rpm
But when I install the ovirt-engine
#sudo yum install -y ovirt-engine
reported on error:
Installing :
On 05/03/2012 04:29 AM, Nicholas Kesick wrote:
Update: Please see my previous email and attachments as that may provide
more info still.
I manually renamed the bridge from breth0 to ovirtmgmt (edited
/etc/sysconfig/network-scripts/ifcfg-eth0, copied
/etc/sysconfig/network-scripts/ifcfg-breth0
On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
I managed to get a host successfully added into oVirt Manager (Fedora16
minimum install, then used the wiki RPM install method), but the last
event reports Host hostname moved to Non-operational state as host
does not meet the cluster's minimum CPU
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = 49434D53-0200-9066-2500-66902500E853_00:25:90:66:53:E8
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
Птн 04 Май 2012 09:14:22 +0400, Itamar Heim ih...@redhat.com написал:
On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
I managed
On 05/04/2012 02:26 PM, Nicholas Kesick wrote:
Date: Fri, 4 May 2012 08:14:14 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] Host missing cpuFlags
On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
I managed to get a host
:34 +0300, Itamar Heim wrote:
On 05/04/2012 02:26 PM, Nicholas Kesick wrote:
Date: Fri, 4 May 2012 08:14:14 +0300
From: ih...@redhat.com
To: cybertimber2...@hotmail.com
CC: users@ovirt.org
Subject: Re: [Users] Host missing cpuFlags
On 05/04/2012 06:49 AM
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine
however, im getting: Host ovirt-node1 moved to Non-Operational state as host
does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags
These
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine
however, im getting: Host ovirt-node1 moved
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 14:51 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 03:16 PM, Barry Kostjens wrote:
Hello,
I'm
On 05/07/2012 05:20 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 16:14 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:54 PM, Barry Kostjens wrote:
Op 7 mei 2012, om 15:50 heeft Itamar Heim het volgende geschreven:
On 05/07/2012 04:02 PM, Barry Kostjens wrote:
Op 7 mei
On 05/08/2012 07:09 PM, Justin Clift wrote:
Hi all,
Successfully set up a basic initial oVirt installation (Engine + 1 x host node
running 2.3.0-1.fc16 stable).
No storage nor VM's configured yet.
The host has been activated fine through the Engine web UI.
Now looking how gracefully shut
On 05/09/2012 06:43 AM, Justin Clift wrote:
On 09/05/2012, at 7:01 AM, Itamar Heim wrote:
On 05/08/2012 07:09 PM, Justin Clift wrote:
Hi all,
Successfully set up a basic initial oVirt installation (Engine + 1 x host node
running 2.3.0-1.fc16 stable).
No storage nor VM's configured yet
On 05/09/2012 12:03 PM, Rahul Upadhyaya wrote:
Hi folks,
Is there a way to assign a static IP while provisioning a new VM?
I do not want to individually go to the console to specify the Static IP
address. Is there any means for specifying that from the management
UI/ovirt-python-binding to do
On 05/09/2012 02:18 PM, Dennis Jacobfeuerborn wrote:
On 05/08/2012 01:44 PM, Yair Zaslavsky wrote:
On 05/08/2012 02:26 PM, Dennis Jacobfeuerborn wrote:
Hi,
I just installed oVirt and so far things seem to be running smoothly for
the 1-node setup. I can't seem to add users though. When I go to
On 05/09/2012 04:43 PM, Shu Ming wrote:
On 2012-5-9 18:03, Itamar Heim wrote:
On 05/09/2012 12:03 PM, Rahul Upadhyaya wrote:
Hi folks,
Is there a way to assign a static IP while provisioning a new VM?
I do not want to individually go to the console to specify the Static IP
address
On 05/10/2012 04:26 AM, Shu Ming wrote:
On 2012-5-10 2:08, Itamar Heim wrote:
On 05/09/2012 04:43 PM, Shu Ming wrote:
On 2012-5-9 18:03, Itamar Heim wrote:
On 05/09/2012 12:03 PM, Rahul Upadhyaya wrote:
Hi folks,
Is there a way to assign a static IP while provisioning a new VM?
I do
On 05/10/2012 10:55 AM, Yaniv Kaul wrote:
On 05/10/2012 09:40 AM, Gary Kotton wrote:
On 05/10/2012 09:07 AM, Itamar Heim wrote:
Gary - can you please share how quantum solves this?
Hi,
At the moment there is work in progress of integrating Melange
(http://wiki.openstack.org/Melange
On 05/15/2012 09:14 AM, Shu Ming wrote:
Some errors in service status, Is engine-notifierd critical to VDSM? Why
did it say pgrep: invalid user name: engine
no. engine-notifierd just sends emails to users
[root@ovirt-node1 ~]# service --status-all
/etc/init.d/ceph: ceph conf
On 04/29/2012 01:41 PM, Gary Kotton wrote:
Hi,
As part of a POC we have integrated Quantum
(http://wiki.openstack.org/Quantum) into oVirt (http://www.ovirt.org/).
This has been tested with the OVS and Linux Bridge plugins.
The details of the integration can be found at -
PM, Itamar Heim wrote:
On 04/05/2012 05:25 PM, зоррыч wrote:
Already know the date when it is added support for glusterfs?
I can work with the test in a test version of glusterfs?
there are two parts to the support:
1. managing the gluster hosts/storage/volumes - patches for different
parts
On 05/16/2012 10:46 PM, David Jaša wrote:
Nerijus Baliunas píše v St 16. 05. 2012 v 22:15 +0300:
On Wed, 16 May 2012 14:06:09 -0400 (EDT) Marian Krcmarikmkrcm...@redhat.com
wrote:
are no USB devices
plugged in a remote server. Is it possible to connect to a remote
host, not localhost,
with
On 05/17/2012 11:28 AM, Omer Frenkel wrote:
- Original Message -
From: Itamar Heimih...@redhat.com
To: Dan Kenigsbergdan...@redhat.com
Cc: Haim Ateyahat...@redhat.com, users@ovirt.org, Omer
Frenkelofren...@redhat.com
Sent: Wednesday, May 16, 2012 8:50:59 PM
Subject: Re: [Users] Host
On 05/17/2012 06:55 PM, Bharata B Rao wrote:
On Wed, May 16, 2012 at 3:29 PM, Itamar Heimih...@redhat.com wrote:
On 05/15/2012 07:35 PM, Andrei Vakhnin wrote:
Yair
Thanks for an update. Can I have KVM hypervisors also function as storage
nodes for glusterfs? What is a release date for
On 05/17/2012 02:11 PM, Omer Frenkel wrote:
...
second, iirc, the definition was vdsm can override engine vdsm
version
check, so a newer vdsm could still report it will work with an older
engine, without needing to change the older engine to match it?
i agree as well, i think the intention
On 05/16/2012 09:51 PM, ov...@qip.ru wrote:
May be it is not ovirt-vdsm problem, but Fedora16-guest (minimal
install) don't start. Instalation is OK, but after boot it freeze before
login screen. It can boot in recovery mode but message file is empty.
How is it possible to fix?
well, to rule
On 05/17/2012 03:52 PM, Ewan Mac Mahon wrote:
Hi,
I've got a development oVirt system with four machines, one NFS storage,
one engine, and two oVirt Node hosting boxes. All the machines have an
ethernet interface with an IP on the 'real' network/subnet that they
live on, and there's a private
On 05/15/2012 05:34 PM, Gary Kotton wrote:
...
2. host management -- interface
2.1 you are suggesting to remove the vlan field with a fabric field?
are we sure this is something which shouldn't be presented in the main
view and only via extended properties?
Yes, this is what I am suggesting.
On 05/18/2012 04:20 PM, Dan Kenigsberg wrote:
On Thu, May 17, 2012 at 10:03:31PM +0300, Itamar Heim wrote:
On 05/17/2012 02:11 PM, Omer Frenkel wrote:
...
second, iirc, the definition was vdsm can override engine vdsm
version
check, so a newer vdsm could still report it will work
On 06/01/2012 12:31 PM, Juan Hernandez wrote:
You are hitting a known issue with that we have with the Java 7 in
Fedora 17. There is change already proposed to fix that:
http://gerrit.ovirt.org/4540
is there a simple way to run the 3.0 ovirt in java 6 compat mode till we
released the 3.1?
On 05/31/2012 05:12 PM, Oded Ben Ozer wrote:
Hi folks,
I'm trying to evaluate ovrit as a possible virtualization solution for
my datacenter .
I need some of my VMs to have access to multiple disks installed in the
host so that the RAID will be configured in the guest level, this way
I can
On 05/23/2012 10:50 AM, patrick wrote:
Hello,
I need to convert a single vmdk file to run on ovirt. What's the
easiest and fastest way to do this? Do I need to convert it with
vmware2libvirt fist and then into ovirt? I would be happy if someone
could give me a hint.
matt - Is v2v relevant in
On 05/22/2012 11:24 AM, patrick wrote:
Hello,
I'd like to import an existing VM containing Windows XP to ovirt.
However if I run virt-v2v I always get the following error:
find: failed to restore initial working directory: Permission denied
virt-v2v: WARNING: There is no virtio net driver
, 2012 at 5:34 PM, Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 05/31/2012 05:12 PM, Oded Ben Ozer wrote:
Hi folks,
I'm trying to evaluate ovrit as a possible virtualization
solution for
my datacenter .
I need some of my VMs to have access
On 06/06/2012 09:50 PM, Robert Middleswarth wrote:
I like spice under Fedora but most of my users use windows. A few use
Kubuntu none user Fedora at this time. I like ovirt and have been
testing it for some time. 3.1 looks really good and all my tests have
been working well if I can fix the
On 06/07/2012 01:14 AM, Robert Middleswarth wrote:
On 06/06/2012 03:13 PM, David Jaša wrote:
Hi Robert,
This is a problem:
1 a) the active x plugin for windows/ie is not yet released.
Yep I know. I tired to work around the issue by creating a fedora VM
for people to VNC to however spicec
On 06/07/2012 12:21 AM, e...@helldal.net wrote:
After a couple of reboots ( too cycle trough the nics ) my
configuration was correct, my etc/sysconfig/network-scripts/ifcfg-*
files where all in order. ( with correct mac address )
But this file dont excist on any of my nodes:
On 06/07/2012 01:07 PM, Dael Maselli wrote:
I don't need SLA or support. I don't need RedHat.
Production is what I expect from a software that is developed for
performance load balancing, high-avaliability, failover, etc.
To me it seems natural, as I use to do with all Linux software, we use
On 06/07/2012 10:10 AM, Haim Ateya wrote:
- Original Message -
From: ov...@qip.ru
To: users@ovirt.org
Sent: Thursday, June 7, 2012 9:22:35 AM
Subject: [Users] VDSM errors on fedora17
VDSM from http:// www . ovirt .org/releases/beta/fedora/17/ www.
ovirt .org/releases/beta/fedora/17/
On 06/09/2012 04:02 PM, Mohsen Saeedi wrote:
Hi
I have problem with cpu type in Ovirt. I have a HP server with Intel(R)
Xeon(R) CPU 5130 @ 2.00GHz. when i try to add this host as Ovirt host
in default cluster, i get the error message:
Host CPU type is not compatible with Cluster Properties
On 06/10/2012 10:01 AM, Mohsen Saeedi wrote:
It's Intel Xeon CPU 5130.
Itamar, as you said i run that command and i paste the command output below:
[root@kvm01 ~]# vdsClient -s 0 getVdsCaps grep -i flags
sorry, i meant:
vdsClient -s 0 getVdsCaps | grep -i flags
the pipe would have made this
On 06/13/2012 08:41 AM, Yair Zaslavsky wrote:
On 06/13/2012 07:41 AM, Haim Ateya wrote:
Hi Ian,
You seem to run into a bug in our advanced NFS options capability.
in order to workaround this issue, please use 'Auto Negotiate' option for now,
that shall work.
you can track this issue in:
On 06/13/2012 03:18 PM, Yaniv Kaul wrote:
On 06/13/2012 03:11 PM, Winfried de Heiden wrote:
The bug is fixed at hash: b41a60fcf9d2b820a0d3d1ef8647f5a0edd34601
???
Is a fix available?
Translation: it's available from git source repository, fixed using the
commit with the above hash.
Mere
On 06/14/2012 07:46 AM, Robert Middleswarth wrote:
Got the following error when attempting to join a new host.
Failed to install Host ann100ovirt01. Step: GLUSTER PACKAGES; Details:
No package vdsm-gluster available. Error: Nothing to do (vdsm-gluster).
Thanks
Robert
did you check the
On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:
Hi Folks,
Template creation time for me is around 30mins for a 10 GB (Disk Space)
VM. My oVirt Manager has 4GB RAM. Is this within expected time for
template creation, if not, then what could I check to possibly improve
the performance in this
On 06/14/2012 10:48 AM, Dafna Ron wrote:
NFS is always slower because we will always create a preallocated disk.
I would say that 30 minutes for 10GB on NFS might be a little slow but
not significantly.
Dafna - it will create RAW, not pre-allocated, right?
On 06/14/2012 10:12 AM, Rahul
On 06/14/2012 10:50 AM, Dafna Ron wrote:
On 06/14/2012 10:49 AM, Itamar Heim wrote:
On 06/14/2012 10:48 AM, Dafna Ron wrote:
NFS is always slower because we will always create a preallocated disk.
I would say that 30 minutes for 10GB on NFS might be a little slow but
not significantly
command line you used?
maven version?
git repo?
any special locale on your system?
On 06/14/2012 02:04 PM, зоррыч wrote:
An error in the encoding:
[INFO] [resources:testResources {execution: default-testResources}]
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] skip non
On 06/18/2012 03:41 PM, David Wilson wrote:
Hi guys,
I am looking for a simple way to backup guest images.
What is the recommended/best method to copy vm snapshots from oVirt? I
am hoping to copy to an NFS share (export domain) if possible? From what
I've seen it is possible when using qemu-img
On 06/18/2012 04:50 PM, зоррыч wrote:
Any ideas for solutions?
Is this a bug?
*From:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On
Behalf Of *зоррыч
*Sent:* Sunday, June 17, 2012 12:04 AM
*To:* 'Vijay Bellur'; 'Robert Middleswarth'
*Cc:* users@ovirt.org; 'Daniel Paikov'
?
http://www.ovirt.org/wiki/Troubleshooting_NFS_Storage_Issues
-Original Message-
From: Itamar Heim [mailto:ih...@redhat.com]
Sent: Monday, June 18, 2012 7:07 PM
To: зоррыч
Cc: 'Vijay Bellur'; 'Robert Middleswarth'; users@ovirt.org; 'Daniel Paikov'
Subject: Re: [Users] Ovirt 3.1
On 06/19/2012 12:50 AM, Trey Dockendorf wrote:
I don't know if this is the wrong place to ask this question, but I
just started seeing SELinux denials after adding an iSCSI storage
domain in oVirt using my first node. The node is reporting that
selinux is preventing /usr/sbin/wdmd from
On 06/20/2012 04:09 AM, Robert Middleswarth wrote:
On 06/18/2012 04:47 AM, Juan Hernandez wrote:
On 06/18/2012 04:25 AM, Robert Middleswarth wrote:
2012-06-17 05:21:24,682 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(ajp--0.0.0.0-8009-9) Failed to
On 06/20/2012 07:38 PM, Andrey Gordeev wrote:
Andrey Gordeev aka dreyou
20.06.2012 19:34 user Itamar Heim ih...@redhat.com
mailto:ih...@redhat.com wrote:
On 06/20/2012 05:46 PM, Andrey Gordeev wrote:
Vm custom parameters not passed to vdsm hooks environment. Vm started
normally
On 06/20/2012 06:38 PM, Trey Dockendorf wrote:
I have been using 3.1 as it's the default. Is the different just the
API updates? All I could really find related to 3.0 vs 3.1 pertaining
to networking was this document
http://www.ovirt.org/wiki/Features/Design/Network/SetupNetworks
just to
PM
To: 'Itamar Heim'
Cc: 'Daniel Paikov'; users@ovirt.org
Subject: Re: [Users] Ovirt 3.1 and gluster (creation in ovirt)
I'm sorry for your persistence, but I'm trying to mount gluster storage not NFS
storage.
Such a document is to gluster storage?
How can I see what line ovirt considered invalid
On 06/21/2012 06:35 AM, Bing Bu Cao wrote:
Hi,everyone
I have also met this problem recently,but I was just using vdsm to
create a vm and boot it to install FC16/17 instead of using ovirt-engine.
Maybe it is a bug or problem of vdsm.
I also met one problem:
After created a vm,after a
On 06/21/2012 09:25 PM, Robert Middleswarth wrote:
On 06/19/2012 12:41 AM, Itamar Heim wrote:
On 06/19/2012 12:18 AM, Robert Middleswarth wrote:
I create a glusterfs storage ontop of a volume but vdsm is mounting it
as user root NOT kvm. Is there some kind of option I can add to tell it
to use
On 06/23/2012 01:22 AM, Trey Dockendorf wrote:
If I keep my ovirtmgmt interface on a 100Mbps subnet, and my VM
Networks on 1Gbps network, there's anything special I have to do in
routing or anything to prevent traffic of the VMs from following the
default route defined in ovirtmgmt?
just on
On 06/23/2012 05:36 PM, Winfried de Heiden wrote:
Hi all,
Using the latest RPM's from www.ovirt.org/releases/beta/fedora/17
creating an online snapshot still fails:
/var/log/ovirt-engine/engine.log:
2012-06-22 14:27:59,378 INFO
[org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand]
On 06/24/2012 06:42 PM, Robert Middleswarth wrote:
On 06/23/2012 10:29 PM, Robert Middleswarth wrote:
On 06/23/2012 09:08 PM, Itamar Heim wrote:
On 06/24/2012 03:50 AM, Robert Middleswarth wrote:
It took me a while with lots of trail and error but I am pretty
close to
getting everything
On 06/25/2012 12:00 PM, jose garcia wrote:
On 06/25/2012 04:17 PM, Dan Kenigsberg wrote:
On Mon, Jun 25, 2012 at 03:15:47PM +0100, jose garcia wrote:
On 06/25/2012 01:24 PM, Dan Kenigsberg wrote:
On Mon, Jun 25, 2012 at 01:15:08PM +0100, jose garcia wrote:
On 06/25/2012 12:30 PM, Dan
On 06/25/2012 10:22 PM, Robert Middleswarth wrote:
On 06/25/2012 09:26 PM, Nathan Stratton wrote:
On Mon, 25 Jun 2012, Robert Middleswarth wrote:
Make sure vdsm-gluster is installed on all nodes? It wasn't installed
on nodes that were added before I added a check box to support
gluster on the
On 06/25/2012 07:59 PM, Nathan Stratton wrote:
Steps:
1) Installed ovirt-engine, configured Cluster for GlusterFS
2) Installed 8 ovirt 3.1 nodes
3) Joined all 8 notes with ovirt-engine (all up and happy)
4) Manually added all 8 peers for GlusterFS on hosts (all peers happy)
I thought ovirt
401 - 500 of 1608 matches
Mail list logo
