Hi,
I've resized the lun I'm using for data domain. I've changed the lun,
rescaned the target with iscsiadm and reloaded multipath to get the new
size. The thins is that though all the hosts sees the new size, ovirt
doesn't. Do I need to run something to update the engine db?
I'm running ovirt 3.2
Hi,
I'm changing the master domain to a new added one. I've placed the old
in maintenance and ovirt made the change of master to the new one. The
thing is that now that I have both active, I get this error:
Sync Error on Master Domain between Host Dell2 and oVirt Engine. Domain:
IBM3300 is marked
Hi,
I know that now there's a doc in google drive for this, but I don't have
write access so I post this here:
I need to backup my vms that use direct-luns as disks and neither
snapshot nor export do the job, so I propose at least one of those
options to be implemented.
Regards,
_
export direct luns or shared disks.
>
> Regards,
> Maor
>
> On 11/11/2013 05:31 PM, Juan Pablo Lorier wrote:
>> Hi Liron,
>>
>> I was told the opposite prior in the list. Snapshots of direct-luns are
>> not implemented, but if I export the vm it should.
part of the exported data.
>
> Thanks,
> Liron
>
> - Original Message -
>> From: "Juan Pablo Lorier"
>> To: "users"
>> Sent: Monday, November 11, 2013 5:26:17 PM
>> Subject: [Users] Export not exporting the disk
>>
>> Hi,
>
Hi,
I've already posted before but the thread went dead. If I export a
stoped vm with direct-lun disk, it creates the export without errors but
doesn't export the disk. I was told that it should.
How can I debugg this?
Regards,
___
Users mailing list
Use
Thu, Oct 31, 2013 at 02:29:53PM -0200, Juan Pablo Lorier wrote:
>> Hi,
>>
>> I've an ovirt 3.2 install and I use iscsi targets for the disks. The
>> thing is that if I use ovirt to access the iscsi targets, it fails
>> because it doesn't get the right config depl
Heim wrote:
> On 10/31/2013 08:11 PM, Juan Pablo Lorier wrote:
>> Gianluca,
>>
>> I saw your post and I think it does not apply to my problem. First of
>> all, I have newer version than yours:
>>
>> ovirt-engine.noarch 3.2.2-1.1.el6 @ovirt-stable
&
Thanks, I thought ovirt had something as it pushes the multipath.conf in
the host deploy (overwritting my config). I may dig into puppet as it
may also help in provisioning bare metal hosts.
Regards,
On 31/10/13 19:58, Dan Kenigsberg wrote:
> On Thu, Oct 31, 2013 at 02:29:53PM -0200, Juan Pa
e vms and
exporting them, but even exporting a shut down vm does not copy the disk.
Is exporting of a direct lun possible with ovirt?
Regards,
On 31/10/13 15:03, Gianluca Cecchi wrote:
> On Thu, Oct 31, 2013 at 5:24 PM, Juan Pablo Lorier wrote:
>
> Hi,
>
> I have a DC with a
27;s not by a
>> snapshot,?
>>
>> El oct 31, 2013 2:42 PM, "Liron Aravot" > <mailto:lara...@redhat.com>> escribió:
>>
>> Hi Juan,
>> When you a snapshot- the snapshot is being taken for image disks -
>> lun/shareable disks
Thank you, I'll take a look at that.
Regards,
On 31/10/13 15:03, Gianluca Cecchi wrote:
> On Thu, Oct 31, 2013 at 5:24 PM, Juan Pablo Lorier wrote:
>
> Hi,
>
> I have a DC with an ISCSI data storage and several VMs running
> with direct luns discs for eac
Hi,
I've an ovirt 3.2 install and I use iscsi targets for the disks. The
thing is that if I use ovirt to access the iscsi targets, it fails
because it doesn't get the right config deployed to the hosts. Thus I
had to do this manually and add the "private" header to the
multipath.conf file so ovirt
Hi,
I have a DC with an ISCSI data storage and several VMs running with
direct luns discs for each one. Ovirt is 3.2 all running on top of
centos 6.4 minimal(hosts and engine). I want to take snapshots of
the vms for backup but though it claims everything went right,
not making any functional or
> interaction changes. If the basics are ok, then we can build on it with
> regard to other changes as necessary.
>
> -Malini
>
> - Original Message -
> From: "Juan Pablo Lorier"
> To: users@ovirt.org
> Sent: Monday, October 14, 2
It's pretty, no much of a change, but a nice one.
Regards,
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi,
I've made a change to the host where I run nfs for iso images and after
reloading the nfs conf ovirt started to print to console and to log this
every few seconds:
<11>vdsm Storage.DomainMonitorThread ERROR Error while collecting domain
0d22a7d7-a7e0-4c17-b132-5764b7940a70 monitoring informat
Thanks for the info.
Regards,
On 06/10/13 17:26, Itamar Heim wrote:
> On 08/29/2013 05:22 PM, Juan Pablo Lorier wrote:
>> Hi,
>>
>> I think that one of the best things from Proxmox is the ability to
>> connect to any of the hosts via web and been able to admin the
enhance network
capabilities, but until then, I guess I'll keep getting the features I
need by changing network topology and using network tools.
Regards,
On 17/09/13 03:24, Moti Asayag wrote:
> Sorry for the delay in response.
>
> - Original Message -
>> From: "Ju
egration and it looks promising,
I'm not sure I totally get how it'll work and how complex the setup can
be, but looks like it can give a hand on cases like mine.
Regards,
On 10/09/13 09:17, Moti Asayag wrote:
>
> - Original Message -----
>> From: "Juan Pablo Lorie
ths, will I be able to use the bridge to assign it to a vm?
>> Regards,
>>
> As long as the bridge is defined on engine side and reported by VDSM you
> should
> be able to assign vms to it.
>
> Please report if hiding the additional nics (only one nic shouldn't be
ns.
Regards,
On 10/09/13 09:17, Moti Asayag wrote:
>
> - Original Message -----
>> From: "Juan Pablo Lorier"
>> To: "Dan Kenigsberg"
>> Cc: "users"
>> Sent: Tuesday, September 10, 2013 2:50:08 AM
>> Subject: Re: [Users] Bridge
Hi Dan
By hiding the eths, will I be able to use the bridge to assign it to a vm?
Regards,
El 09/09/13 19:48, Dan Kenigsberg escribió:
On Mon, Sep 09, 2013 at 03:19:48PM -0300, Juan Pablo Lorier wrote:
Hi,
Another question: I need to connect 2 eths to a Fortigate cluster so I
need them to be
Hi,
Another question: I need to connect 2 eths to a Fortigate cluster so I
need them to be in a bridge with single ip so it can connect to the DMZ.
As far as I can see, ovirt 3.2 is allowing me to create bonds and assign
logical network to them, but not to create a bridge. Can I create it
manually
Hi,
I've been using ovirt in production for a couple of months and had no
troubles ( great product! :-) ).
I've two issues I'd like to fix and may also be usefull for a new
feature in 3.4:
The first is that I had to put # RHEV PRIVATE in the multipath.conf of
every host as ovirt kept deleting the
Hi,
I think that one of the best things from Proxmox is the ability to
connect to any of the hosts via web and been able to admin the hole
infrastructure from there. This avoids the single point of failure that
today engine represents in ovirt plataform.
I agree with Jakub that been able to mix In
I apologize, I didn't realize I had to restart. It's fixed. Thank you
very much.
Regards,
Juan Pablo Lorier
On 08/07/13 17:55, Joop wrote:
> Juan Pablo Lorier wrote:
>> Hi,
>>
>> I need to get ovirt to production as my XEN environment is falling apart.
>>
Hi,
I've tried with a brand new fedora vm without OS and I have the same
error. I've made the configuration change proposed by Joop not only for
3.2 version but also for 3.1 just in case something stays in the vms
after creation (as they were not exported and then imported, just used
the LUN).
I h
Hi Matthew,
You may have to create your own thread as this one is for a problem I
have after the migration.
Regards,
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
new VM from
scratch to see if something in the VMs that were created with 3.1
breakes 3.2.
Anything else you can think of is welcome.
Regards,
Juan Pablo Lorier
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
nning.
Regards,
Juan Pablo Lorier
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
other
platforms handle this scenarios, I thought it fare.
I've posted a note in the bug and if I can help you, don't hesitate asking.
Regards,
Juan Pablo Lorier
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
l.java:43)
[rt.jar:1.7.0_25]
And also I have an login event every minute which didn't happen in 3.1
version.
Regards.
Juan Pablo Lorier
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi,
I finally decided to start from scratch. I've cleaned up the engine and
re run engine setup. I was afraid that restoring the database may lead
to some inconsistencies and I'd rather configure everything.
Thank you all for your help and keep the good work.
Regards,
Juan Pa
Hi Sandro,
I don't know if it's not better just to start over, because I'm wasting
your time and it's not even a production environment. Maybe it's better
just to cleanup everything and start over.
Other idea I had is to cleanup the database and then import the backup
that the upgrade made before
Hi Sandro,
I tried to run the engine-cleanup --dont-drop-db and after the
engine-setup but got this:
Upgrading Database Schema... [ ERROR ]
backupDB() got an unexpected keyword argument 'backup_file'
Please check log file
/var/log/ovirt-engine/engine-setup_2013_06_28_10_18
Hi again,
What if I run engine-setup again as I start from scratch? will it
overwrite the database and loose all the vm's info?
regards
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
No, I don't. It's not yet in production, so it's not catastrophic if I
have to reinstall the engine from scratch.
Anyway, if there's a way to create the certificates and "change" them
instead of the olds, it's much better.
Regards,
___
Users mailing lis
ay to do that for me.
Regards,
On 27/06/13 08:50, Sandro Bonazzola wrote:
> Il 26/06/2013 19:56, Juan Pablo Lorier ha scritto:
>> Hi Sandro,
>>
>> I'm finallyl back at the office and started working on the upgrade.
>> You'r suggestion worked but I have a d
by the way, engine setup is already in 3.2.2
(ovirt-engine-setup-3.2.2-1.1.43.el6.noarch)
regards,
On 27/06/13 08:50, Sandro Bonazzola wrote:
> Il 26/06/2013 19:56, Juan Pablo Lorier ha scritto:
>> Hi Sandro,
>>
>> I'm finallyl back at the office and started workin
ok, I'll try that and let you know the results.
Regards,
On 27/06/13 08:50, Sandro Bonazzola wrote:
> Il 26/06/2013 19:56, Juan Pablo Lorier ha scritto:
>> Hi Sandro,
>>
>> I'm finallyl back at the office and started working on the upgrade.
>> You'
Hi Sandro,
I'm finallyl back at the office and started working on the upgrade.
You'r suggestion worked but I have a different problem now.
This is the output of the engine-upgrade
Updating service configuration... [ ERROR ]
**Error: Upgrade failed, rolling back**
**Reason
Thanks Sandro,
I'll give that a try as soon as I get back to work as I've got ill.
Regards,
El 12/06/13 04:33, Sandro Bonazzola escribió:
Il 11/06/2013 19:45, Juan Pablo Lorier ha scritto:
Hi,
I'm trying to update from 3.1 to 3.2 on Centos 6.4 using the repo from
dreyou.org an
Hi,
I'm trying to update from 3.1 to 3.2 on Centos 6.4 using the repo from
dreyou.org and when I try to update the engine it gets into a loop
trying to stop the 0 tasks in the database:
Would you like to proceed? (yes|no): yes
Stopping ovirt-engine service...[ DONE ]
Stopp
Thanks Itamar,
I'll take a look at that URL.
Regards,
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Maor,
The thing is that I trigger the snapshot creation and everything seems
to be ok, but I can't see any new volume of any kind. As the VM runs
from an iscsi lun, it can not use LVM snapshots as there's no spare
space to create any new LMV volume, neither I see any new volume in the
data stor
Hi,
I'm trying to understand how ovirt manages snapshots to start using them
for vm backups. I have my vms to use a iscsi LUN for the system (each
has its own) and I have no extra space to create an LVM snapshot in the
VM disk.
When I hit "create" in the vm snapshot tab, it creates the snapshot an
Hi Lior,
Thank you very much for your help. I'm sure things are improving and
fast thanks to the great job of the ovirt team. Right now I think that
using VLans is going to be the safest choice to me. I plan to move the
plataform into production before end of month so I'll stick to stable stuff.
I
Hi Lior
I did managed to get the mgmt network tagged so now I can use the same
interface for several networks. The thing now is that I also have two
networks I use for iscsi that I'd like to be able to use in the same
interface (not the mgmt one) in one of the hosts, but as this networks
are in vl
Hi Lior,
Thanks for the tip. I don't know if I can move to 3.2 as the centos
repos are not there yet and I'm not quite sure of moving (compile 3.2)
to a version without "stable" dependencies for a system almost in
production.
I'm trying to move stuff into vlans so I can share the interfaces.
I'd l
Hi René
It's grayed in both DC edit and cluster assign/unassign, and even when I
create a new network, I can't choose it not to be a VM network.
Regards,
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Itamar,
I've read the doc you pointed (actually I didn't look before in red hat,
just in ovirt world) but in the manual, vm option is not grayed as in my
3.1 management engine.
Do I have to tune something in the config so new networks are not VM
networks by default?
Regards,
__
Hi everyone,
Thank you all, you've been very helpfull. I have one more question; How
do I get a network not to be a VM network. If I create a new one, the VM
option is ticked and grayed so I can't untick it. The same thing with an
already created network.
Sorry for all this questions, but though I
cchi wrote:
> On Fri, May 10, 2013 at 4:12 PM, Juan Pablo Lorier wrote:
>> Hi,
>>
>> thank you all for your help. I took a little time to try and test your
>> guidelines and I've managed to get ovirmgmt tagged living together with
>> other tagged lans over th
Hi,
thank you all for your help. I took a little time to try and test your
guidelines and I've managed to get ovirmgmt tagged living together with
other tagged lans over the same physical interface.
I hope some day it can allow untagged and tagged networks over the same
interface.
Regards,
__
ng to get ovirtmgmt to be tagged so I can share the bond
with other tagged networks.
Regards,
On 08/05/13 11:53, Gianluca Cecchi wrote:
> On Wed, May 8, 2013 at 4:18 PM, Juan Pablo Lorier wrote:
>> Hi,
>>
>> I'm new to ovirt and I'm dealing with network configuration. I ha
Hi René,
Tanks for your help. I've tried in the direction you pointed and I was
able to share the bond among other tagged networks. One of the problems
would be how to edit ovirtmgmt network now that it's created, I just
can't find in the way to do it by the web. I've tried starting a hole
new dat
Hi,
I'm new to ovirt and I'm dealing with network configuration. I have a
host with a bonding of 4 eths and on top of that I added ovirtmgmt
interface. I now want my vm to work on vlan 128 so I added the nic to
ovirtmgmt bridge. I have access to vlan 1 (the bridge to the bond) but
even if I add th
101 - 158 of 158 matches
Mail list logo
