[ovirt-users] Re: yum error
Valentin, Thanks for your prompt reply. I makes sense as I just set this server up and just installed the fcoe modules... I am a bit confused though... We have FCOE (flexlom) in our env, As per HP we need the kmod-hpqlgc-qla2xxx.x86_64 which brought down the mlnx kernel module. It seems like it is but I am still going to ask... can safely delete the module?:) Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Nov 16, 2018, at 8:45 AM, Valentin Bajrami wrote: > Hi Fernando, > The issue occurred to me a few days ago. To mitigate this I performed > the following> rpm -e --nodeps mlnx-ofa_kernel > yum install > http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm> This was a side > effect of HP repositories we used in the passed to > install hpssacli and stuff.> HTH > On 11/16/18 3:14 PM, Fernando Fuentes wrote: >> Team, This just started happening. Error: Package: ovirt-host-4.2.3- >> 1.el7.x86_64 (@ovirt-4.2) Requires: glusterfs-rdma Removing: >> glusterfs-rdma-3.12.15- >> 1.el7.x86_64 (@ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.15- >> 1.el7 Obsoleted By: mlnx-ofa_kernel-4.3- >> OFED.4.3.1.0.1.1.g8509e41.3.rhel7u4.x86_64 (spp) Not found Available: >> glusterfs-rdma-3.8.4-53.el7.centos.x86_64 (base) glusterfs-rdma = 3.8.4- >> 53.el7.centos Available: glusterfs-rdma-3.8.4-54.15.el7.centos.x86_64 >> (updates) glusterfs-rdma = 3.8.4-54.15.el7.centos Available: >> glusterfs-rdma-3.12.0- >> 1.el7.x86_64 (ovirt-4.2-centos-gluster312) I cant seem to update. >> Any ideas why this is happening? Regards, >> > -- Met vriendelijke groeten, Valentin Bajrami Target Holding> > _ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/> List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/IOVSF7XUEADEJFHVAEMJGSVW4KRXSS4R/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D2WWWF4J55K4RESP7LLCSTH6SGHOFBVB/
[ovirt-users] yum error
Team, This just started happening. Error: Package: ovirt-host-4.2.3-1.el7.x86_64 (@ovirt-4.2) Requires: glusterfs-rdma Removing: glusterfs-rdma-3.12.15-1.el7.x86_64 (@ovirt-4.2-centos-gluster312) glusterfs-rdma = 3.12.15-1.el7 Obsoleted By: mlnx-ofa_kernel-4.3-OFED.4.3.1.0.1.1.g8509e41.3.rhel7u4.x86_64 (spp) Not found Available: glusterfs-rdma-3.8.4-53.el7.centos.x86_64 (base) glusterfs-rdma = 3.8.4-53.el7.centos Available: glusterfs-rdma-3.8.4-54.15.el7.centos.x86_64 (updates) glusterfs-rdma = 3.8.4-54.15.el7.centos Available: glusterfs-rdma-3.12.0-1.el7.x86_64 (ovirt-4.2-centos-gluster312) I cant seem to update. Any ideas why this is happening? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZTIEDVHJUQUFXG2OJIUQXBO5AQVS7SZI/
[ovirt-users] repo issues
I am trying to upgrade my ovirt cluster and came across a repo 404. http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found Trying other mirror. Any ideas how to fix it? TIA! -- Fernando Fuentes ffuen...@darktcp.net ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: ovirt 4.1 repo
I had the same issue... But going to 4.2 One of the devs reply with the following - Original message - From: Yedidyah Bar David <d...@redhat.com> To: Fernando Fuentes <ffuen...@darktcp.net>, Sandro Bonazzola <sbona...@redhat.com>, Sahina Bose <sab...@redhat.com>Cc: users <users@ovirt.org> Subject: Re: [ovirt-users] ovirt4.1 repo error Date: Thu, 10 May 2018 09:15:07 +0300 On Thu, May 10, 2018 at 5:30 AM, Fernando Fuentes <ffuen...@darktcp.net> wrote:> I am trying to upgrade my ovirt cluster and came across a repo 404. > > http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml: > [Errno 14] HTTP Error 404 - Not Found> Trying other mirror. > > > Any ideas how to fix it? oVirt-4.1 is not supported anymore, so no-one tries hard to make sure it'sstill installable. Above site currently has only 3.10, 3.12 and 4.0: http://mirror.centos.org/centos/7/storage/x86_64/ No idea if a direct replacement can be: https://buildlogs.centos.org/centos/7/storage/x86_64/gluster-3.8/ but you can try. Adding Sandro and Sahina. Best regards, -- Didi But it does not stop there Once you try to upgrade you will have rpm signature problems So be aware that you will have to install those from the cache manually... A P.S. I wouldn't do this on a production env.... I would go straight to 4.2 if possible. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, May 11, 2018, at 8:16 AM, Alex K wrote: > Hi all, > I have the following issue with repo of 4.1 version: > > I am doing: > > yum install > http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm> yum update > > then I get: > > http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml: > [Errno 14] HTTP Error 404 - Not Found Trying other mirror. To address > this issue please refer to the below wiki article> > I know that 4.2 is released and stable but I cannot go to it if > upgrade of all production servers is not planned.> Can't I use still 4.1? > Thanx, > Alex > _ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: not signed
I also meant to say that yum clean all did not work hence why I had to install the cache rpm via -Uvh.This is on my test cluster, I hope a reply comes back from upstream with a solution This is not good sense they took offline those repos ... I dont want to do this hack on production. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, May 10, 2018, at 3:38 PM, Fernando Fuentes wrote: > I did, > I actually had to install that rpm via rpm -Uvh and it took that way.> > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Thu, May 10, 2018, at 3:10 PM, Arman Khalatyan wrote: >> did you try yum clean all before update?? >> >> Fernando Fuentes <ffuen...@darktcp.net> schrieb am Do., 10. Mai >> 2018, 21:53:>>> I am getting this when trying to upgrade to 4.2 from 4.1: >>> >>> [ ERROR ] Yum Package gdeploy-2.0.6-1.el7.noarch.rpm is not signed >>> [ ERROR ] Failed to execute stage 'Package installation': Package >>> gdeploy-2.0.6-1.el7.noarch.rpm is not signed>>> [ INFO ] Yum Performing >>> yum transaction rollback >>> [ INFO ] Rolling back to the previous PostgreSQL instance >>> (postgresql).>>> [ INFO ] Stage: Clean up >>> Log file is located at >>> /var/log/ovirt-engine/setup/ovirt-engine-setup- >>> 20180510144813-tvu4i2.log>>> [ INFO ] Generating answer file >>> '/var/lib/ovirt-engine/setup/answers/20180510144937- >>> setup.conf'>>> [ INFO ] Stage: Pre-termination >>> [ INFO ] Stage: Termination >>> [ ERROR ] Execution of setup failed >>> >>> Ideas? >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> ___ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org > > _ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: not signed
I did, I actually had to install that rpm via rpm -Uvh and it took that way. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, May 10, 2018, at 3:10 PM, Arman Khalatyan wrote: > did you try yum clean all before update?? > > Fernando Fuentes <ffuen...@darktcp.net> schrieb am Do., 10. Mai > 2018, 21:53:>> I am getting this when trying to upgrade to 4.2 from 4.1: >> >> [ ERROR ] Yum Package gdeploy-2.0.6-1.el7.noarch.rpm is not signed >> [ ERROR ] Failed to execute stage 'Package installation': Package >> gdeploy-2.0.6-1.el7.noarch.rpm is not signed>> [ INFO ] Yum Performing >> yum transaction rollback >> [ INFO ] Rolling back to the previous PostgreSQL instance >> (postgresql).>> [ INFO ] Stage: Clean up >>Log file is located at >> /var/log/ovirt-engine/setup/ovirt-engine-setup- >>20180510144813-tvu4i2.log>> [ INFO ] Generating answer file >> '/var/lib/ovirt-engine/setup/answers/20180510144937- >> setup.conf'>> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Execution of setup failed >> >> Ideas? >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] not signed
I am getting this when trying to upgrade to 4.2 from 4.1: [ ERROR ] Yum Package gdeploy-2.0.6-1.el7.noarch.rpm is not signed [ ERROR ] Failed to execute stage 'Package installation': Package gdeploy-2.0.6-1.el7.noarch.rpm is not signed [ INFO ] Yum Performing yum transaction rollback [ INFO ] Rolling back to the previous PostgreSQL instance (postgresql). [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20180510144813-tvu4i2.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20180510144937-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Ideas? -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: ovirt4.1 repo error
It worked I agree with Christophe. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, May 10, 2018, at 1:23 AM, Christophe TREFOIS wrote: > Well fair enough for people who want to install it. > > But people who have it already installed will see their yum update check > commands etc break, which means we can’t update to latest 4.1 anymore, > and we get errors all over the place. > > I think that if this is the case, the repo URLs should be set not with > 7/ but with 7.minor.version/. > > Cheers, > > > On 10 May 2018, at 08:15, Yedidyah Bar David <d...@redhat.com> wrote: > > > > On Thu, May 10, 2018 at 5:30 AM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > >> I am trying to upgrade my ovirt cluster and came across a repo 404. > >> > >> http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml: > >> [Errno 14] HTTP Error 404 - Not Found > >> Trying other mirror. > >> > >> > >> Any ideas how to fix it? > > > > oVirt-4.1 is not supported anymore, so no-one tries hard to make sure it's > > still installable. > > > > Above site currently has only 3.10, 3.12 and 4.0: > > > > http://mirror.centos.org/centos/7/storage/x86_64/ > > > > No idea if a direct replacement can be: > > > > https://buildlogs.centos.org/centos/7/storage/x86_64/gluster-3.8/ > > > > but you can try. > > > > Adding Sandro and Sahina. > > > > Best regards, > > -- > > Didi > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Email had 1 attachment: > + smime.p7s > 3k (application/pkcs7-signature) ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] ovirt4.1 repo error
I am trying to upgrade my ovirt cluster and came across a repo 404. http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found Trying other mirror. Any ideas how to fix it? TIA! -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
Re: [ovirt-users] Host fencing issues
Yaniv, Thanks for your reply. I understand and I will upgrade... I am just stuck on 4.0.x for a few more days and figured I can solve this issue but it is obvious something is really wrong with this "old" version. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Oct 18, 2017, at 01:52 AM, Yaniv Kaul wrote: > > > On Wed, Oct 18, 2017 at 8:09 AM, Fernando Fuentes > <ffuen...@darktcp.net> wrote:>> __ >> Ok I have not collected data yet... >> I figure I upgraded my engine to the latest revision of the 4.0 >> branch and I did... It actually fix nothing... No matter what I do >> the hosts continue to experience the same issue Is this a known >> problem in the 4.0 branch with CentOS7?> > The latest revision of 4.x is 4.1.6. There's no '4.0 branch' > really, once 4.1 was released, and I warmly advise you to upgrade > to latest 4.1.> >> >> >> I will collect data as soon as I get a chance... >> >> On another note... I was able to bring online a host using the ovirt >> 4.0 node image, I experience other issues though... I cant seem to >> migrate VM's out from the node I can migrate VM's in but not >> out... As if the node is not compatible with the rest of the hosts >> which run Centos 7 x86_64... Is this hunch correct? can ovirt node >> work along side with Centos7 hosts?> > A separate email thread is preferred, but I assume you have > connectivity issues on that node, DNS or routing issues.> > Yes, a node can work alongside a regular host. > Y. > >> >> >> Thoughts and ideas? >> >> >> Regards, >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Mon, Oct 16, 2017, at 02:03 PM, Fernando Fuentes wrote: >>> Thats right. >>> I am going to collect the data and report back. >>> >>> Regards, >>> >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Mon, Oct 16, 2017, at 10:00 AM, Yaniv Kaul wrote: >>>> >>>> >>>> On Mon, Oct 16, 2017 at 5:21 PM, Fernando Fuentes >>>> <ffuen...@darktcp.net> wrote:>>>>> __ >>>>> Any ideas team? >>>>> :( >>>> >>>> I suspect if you've applied the workaround for libvirt >>>> authentication change and things still don't work, we'll need to >>>> see the relevant logs to further understand the issue.>>>> Y. >>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> >>>>> On Fri, Oct 13, 2017, at 11:47 AM, Fernando Fuentes wrote: >>>>>> Team, >>>>>> >>>>>> I think I am hitting this bug: >>>>>> >>>>>> https://gerrit.ovirt.org/#/c/76934/ >>>>>> >>>>>> With that fix libvirtd starts but ovirt still wont bring it >>>>>> online.>>>>>> >>>>>> -- >>>>>> Fernando Fuentes >>>>>> ffuen...@txweather.org >>>>>> http://www.txweather.org >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Oct 13, 2017, at 11:42 AM, Fernando Fuentes wrote: >>>>>>> I am getting this all over the logs: >>>>>>> >>>>>>> https://pastebin.com/5Ua5u2ZA >>>>>>> >>>>>>> -- >>>>>>> Fernando Fuentes >>>>>>> ffuen...@txweather.org >>>>>>> http://www.txweather.org >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: >>>>>>>> You where right. >>>>>>>> I was able to start it manually but its still doing the same >>>>>>>> thing after I try to activate the server it fenced the server >>>>>>>> and send a reboot... Here is the status:>>>>>>>> >>>>>>>> https://pastebin.com/xbXX8UBX >>>>>>>> >
Re: [ovirt-users] Host fencing issues
Ok I have not collected data yet... I figure I upgraded my engine to the latest revision of the 4.0 branch and I did... It actually fix nothing... No matter what I do the hosts continue to experience the same issue Is this a known problem in the 4.0 branch with CentOS7? I will collect data as soon as I get a chance... On another note... I was able to bring online a host using the ovirt 4.0 node image, I experience other issues though... I cant seem to migrate VM's out from the node I can migrate VM's in but not out... As if the node is not compatible with the rest of the hosts which run Centos 7 x86_64... Is this hunch correct? can ovirt node work along side with Centos7 hosts? Thoughts and ideas? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Oct 16, 2017, at 02:03 PM, Fernando Fuentes wrote: > Thats right. > I am going to collect the data and report back. > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Mon, Oct 16, 2017, at 10:00 AM, Yaniv Kaul wrote: >> >> >> On Mon, Oct 16, 2017 at 5:21 PM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote:>>> __ >>> Any ideas team? >>> :( >> >> I suspect if you've applied the workaround for libvirt authentication >> change and things still don't work, we'll need to see the relevant >> logs to further understand the issue.>> Y. >> >>> >>> >>> >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> >>> On Fri, Oct 13, 2017, at 11:47 AM, Fernando Fuentes wrote: >>>> Team, >>>> >>>> I think I am hitting this bug: >>>> >>>> https://gerrit.ovirt.org/#/c/76934/ >>>> >>>> With that fix libvirtd starts but ovirt still wont bring it online.>>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> On Fri, Oct 13, 2017, at 11:42 AM, Fernando Fuentes wrote: >>>>> I am getting this all over the logs: >>>>> >>>>> https://pastebin.com/5Ua5u2ZA >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: >>>>>> You where right. >>>>>> I was able to start it manually but its still doing the same >>>>>> thing after I try to activate the server it fenced the server and >>>>>> send a reboot... Here is the status:>>>>>> >>>>>> https://pastebin.com/xbXX8UBX >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Fernando Fuentes >>>>>> ffuen...@txweather.org >>>>>> http://www.txweather.org >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: >>>>>>> this suggests that libvirt is down. >>>>>>> can you please check libvirtd service status and get the log for >>>>>>> it?>>>>>>> >>>>>>> >>>>>>> Thanks, >>>>>>> Dafna >>>>>>> >>>>>>> On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >>>>>>>> Team, >>>>>>>> >>>>>>>> I went to the log and capture the messages from when the host >>>>>>>> did the update all the way down to the failure.>>>>>>>> >>>>>>>> https://pastebin.com/AwP1gh5g >>>>>>>> >>>>>>>> >>>>>>>> I hope that helps narrowing down the issue >>>>>>>> Ideas, thoughts, and comments are welcome! >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> -- >>>>>>>> Fernando Fuentes >>>>>>>> ffuen...@txweather.org >>>>>>>> http://www.txweather.org >>>>>>>> >>>>>>>> >&
Re: [ovirt-users] Host fencing issues
Thats right. I am going to collect the data and report back. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Oct 16, 2017, at 10:00 AM, Yaniv Kaul wrote: > > > On Mon, Oct 16, 2017 at 5:21 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote:>> __ >> Any ideas team? >> :( > > I suspect if you've applied the workaround for libvirt authentication > change and things still don't work, we'll need to see the relevant > logs to further understand the issue.> Y. > >> >> >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Fri, Oct 13, 2017, at 11:47 AM, Fernando Fuentes wrote: >>> Team, >>> >>> I think I am hitting this bug: >>> >>> https://gerrit.ovirt.org/#/c/76934/ >>> >>> With that fix libvirtd starts but ovirt still wont bring it online.>>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Fri, Oct 13, 2017, at 11:42 AM, Fernando Fuentes wrote: >>>> I am getting this all over the logs: >>>> >>>> https://pastebin.com/5Ua5u2ZA >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: >>>>> You where right. >>>>> I was able to start it manually but its still doing the same thing >>>>> after I try to activate the server it fenced the server and send a >>>>> reboot... Here is the status:>>>>> >>>>> https://pastebin.com/xbXX8UBX >>>>> >>>>> >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: >>>>>> this suggests that libvirt is down. >>>>>> can you please check libvirtd service status and get the log for >>>>>> it?>>>>>> >>>>>> >>>>>> Thanks, >>>>>> Dafna >>>>>> >>>>>> On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >>>>>>> Team, >>>>>>> >>>>>>> I went to the log and capture the messages from when the host >>>>>>> did the update all the way down to the failure.>>>>>>> >>>>>>> https://pastebin.com/AwP1gh5g >>>>>>> >>>>>>> >>>>>>> I hope that helps narrowing down the issue >>>>>>> Ideas, thoughts, and comments are welcome! >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Fernando Fuentes >>>>>>> ffuen...@txweather.org >>>>>>> http://www.txweather.org >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: >>>>>>>> Thanks for your reply. >>>>>>>> >>>>>>>> As requested I got this from the messages log: >>>>>>>> >>>>>>>> https://pastebin.com/t0HRhvT9 >>>>>>>> >>>>>>>> This one is from the host engine: >>>>>>>> >>>>>>>> https://pastebin.com/8vji6MGs >>>>>>>> >>>>>>>> And this one is from the host vdsm: >>>>>>>> >>>>>>>> https://pastebin.com/GgnqRvTE >>>>>>>> >>>>>>>> The funny part is that right when I did the update it seems >>>>>>>> that vdsm died and there is no log after the update.>>>>>>>> >>>>>>>> On the messages lo you can see the errors and the attempts of >>>>>>>> me trying to restart manually but it dies.>>>>>>>> >>>>>>>> Any ideas? >>>>>>>> >>
Re: [ovirt-users] Host fencing issues
Any ideas team? :( -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 11:47 AM, Fernando Fuentes wrote: > Team, > > I think I am hitting this bug: > > https://gerrit.ovirt.org/#/c/76934/ > > With that fix libvirtd starts but ovirt still wont bring it online. > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Fri, Oct 13, 2017, at 11:42 AM, Fernando Fuentes wrote: >> I am getting this all over the logs: >> >> https://pastebin.com/5Ua5u2ZA >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: >>> You where right. >>> I was able to start it manually but its still doing the same thing >>> after I try to activate the server it fenced the server and send a >>> reboot... Here is the status:>>> >>> https://pastebin.com/xbXX8UBX >>> >>> >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: >>>> this suggests that libvirt is down. >>>> can you please check libvirtd service status and get the log >>>> for it?>>>> >>>> >>>> Thanks, >>>> Dafna >>>> >>>> On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >>>>> Team, >>>>> >>>>> I went to the log and capture the messages from when the host did >>>>> the update all the way down to the failure.>>>>> >>>>> https://pastebin.com/AwP1gh5g >>>>> >>>>> >>>>> I hope that helps narrowing down the issue >>>>> Ideas, thoughts, and comments are welcome! >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: >>>>>> Thanks for your reply. >>>>>> >>>>>> As requested I got this from the messages log: >>>>>> >>>>>> https://pastebin.com/t0HRhvT9 >>>>>> >>>>>> This one is from the host engine: >>>>>> >>>>>> https://pastebin.com/8vji6MGs >>>>>> >>>>>> And this one is from the host vdsm: >>>>>> >>>>>> https://pastebin.com/GgnqRvTE >>>>>> >>>>>> The funny part is that right when I did the update it seems that >>>>>> vdsm died and there is no log after the update.>>>>>> >>>>>> On the messages lo you can see the errors and the attempts of me >>>>>> trying to restart manually but it dies.>>>>>> >>>>>> Any ideas? >>>>>> >>>>>> >>>>>> -- >>>>>> Fernando Fuentes >>>>>> ffuen...@txweather.org >>>>>> http://www.txweather.org >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: >>>>>>> can you please provide some logs to the issue? >>>>>>> /var/log/ovirt-engine/engine.log from engine machine and >>>>>>> /var/log/vdsm/vdsm.log from the affected host would be great >>>>>>> start.>>>>>>> >>>>>>> thank you >>>>>>> >>>>>>> On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes >>>>>>> <ffuen...@darktcp.net> wrote:>>>>>>>> Hello Team, >>>>>>>> >>>>>>>> I updated one of my host on my cluster and after it finish and >>>>>>>> try to>>>>>>>> activate the host it quickly claimed that the host was >>>>>>>> unresponsive and>>>>>>>> it fenced the host... Now every time I try to >>>>>>>> activate the host >>>>>>>> it>>>>>>>> clames that is unresponsive and proceeds to fence it... This >>>>>>>> was not>>>>>>>> happening before the update >>>>>>>> The host is reachable with no problems nor issues... >>>>>>>> >>>>>>>> Any ideas? >>>>>>>> >>>>>>>> Centos 7.4 x86_64 host. >>>>>>>> Attached is the vdsm log >>>>>>>> >>>>>>>> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> -- >>>>>>>> Fernando Fuentes ffuen...@txweather.org >>>>>>>> http://www.txweather.org>>>>>>>> >>>>>>>> ___ >>>>>>>> Users mailing list >>>>>>>> Users@ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>> >>>>>> _ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>>> >>>>> ___ Users mailing list >>>>> Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> >>> >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> _ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host fencing issues
Team, I think I am hitting this bug: https://gerrit.ovirt.org/#/c/76934/ With that fix libvirtd starts but ovirt still wont bring it online. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 11:42 AM, Fernando Fuentes wrote: > I am getting this all over the logs: > > https://pastebin.com/5Ua5u2ZA > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: >> You where right. >> I was able to start it manually but its still doing the same thing >> after I try to activate the server it fenced the server and send a >> reboot... Here is the status:>> >> https://pastebin.com/xbXX8UBX >> >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: >>> this suggests that libvirt is down. >>> can you please check libvirtd service status and get the log for it?>>> >>> >>> Thanks, >>> Dafna >>> >>> On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >>>> Team, >>>> >>>> I went to the log and capture the messages from when the host did >>>> the update all the way down to the failure.>>>> >>>> https://pastebin.com/AwP1gh5g >>>> >>>> >>>> I hope that helps narrowing down the issue >>>> Ideas, thoughts, and comments are welcome! >>>> >>>> Regards, >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: >>>>> Thanks for your reply. >>>>> >>>>> As requested I got this from the messages log: >>>>> >>>>> https://pastebin.com/t0HRhvT9 >>>>> >>>>> This one is from the host engine: >>>>> >>>>> https://pastebin.com/8vji6MGs >>>>> >>>>> And this one is from the host vdsm: >>>>> >>>>> https://pastebin.com/GgnqRvTE >>>>> >>>>> The funny part is that right when I did the update it seems that >>>>> vdsm died and there is no log after the update.>>>>> >>>>> On the messages lo you can see the errors and the attempts of me >>>>> trying to restart manually but it dies.>>>>> >>>>> Any ideas? >>>>> >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: >>>>>> can you please provide some logs to the issue? >>>>>> /var/log/ovirt-engine/engine.log from engine machine and >>>>>> /var/log/vdsm/vdsm.log from the affected host would be great >>>>>> start.>>>>>> >>>>>> thank you >>>>>> >>>>>> On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes >>>>>> <ffuen...@darktcp.net> wrote:>>>>>>> Hello Team, >>>>>>> >>>>>>> I updated one of my host on my cluster and after it finish and >>>>>>> try to>>>>>>> activate the host it quickly claimed that the host was >>>>>>> unresponsive and>>>>>>> it fenced the host... Now every time I try to >>>>>>> activate the host >>>>>>> it>>>>>>> clames that is unresponsive and proceeds to fence it... This >>>>>>> was >>>>>>> not>>>>>>> happening before the update >>>>>>> The host is reachable with no problems nor issues... >>>>>>> >>>>>>> Any ideas? >>>>>>> >>>>>>> Centos 7.4 x86_64 host. >>>>>>> Attached is the vdsm log >>>>>>> >>>>>>> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Fernando Fuentes ffuen...@txweather.org >>>>>>> http://www.txweather.org>>>>>>> >>>>>>> ___ >>>>>>> Users mailing list >>>>>>> Users@ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>> >>>>> _ >>>>> Users mailing list >>>>> Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> >>>> ___ Users mailing list >>>> Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >> >> _ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host fencing issues
I am getting this all over the logs: https://pastebin.com/5Ua5u2ZA -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 11:30 AM, Fernando Fuentes wrote: > You where right. > I was able to start it manually but its still doing the same thing > after I try to activate the server it fenced the server and send a > reboot... Here is the status:> > https://pastebin.com/xbXX8UBX > > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: >> this suggests that libvirt is down. >> can you please check libvirtd service status and get the log for it?>> >> >> Thanks, >> Dafna >> >> On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >>> Team, >>> >>> I went to the log and capture the messages from when the host did >>> the update all the way down to the failure.>>> >>> https://pastebin.com/AwP1gh5g >>> >>> >>> I hope that helps narrowing down the issue >>> Ideas, thoughts, and comments are welcome! >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: >>>> Thanks for your reply. >>>> >>>> As requested I got this from the messages log: >>>> >>>> https://pastebin.com/t0HRhvT9 >>>> >>>> This one is from the host engine: >>>> >>>> https://pastebin.com/8vji6MGs >>>> >>>> And this one is from the host vdsm: >>>> >>>> https://pastebin.com/GgnqRvTE >>>> >>>> The funny part is that right when I did the update it seems that >>>> vdsm died and there is no log after the update.>>>> >>>> On the messages lo you can see the errors and the attempts of me >>>> trying to restart manually but it dies.>>>> >>>> Any ideas? >>>> >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: >>>>> can you please provide some logs to the issue? >>>>> /var/log/ovirt-engine/engine.log from engine machine and >>>>> /var/log/vdsm/vdsm.log from the affected host would be great >>>>> start.>>>>> >>>>> thank you >>>>> >>>>> On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes >>>>> <ffuen...@darktcp.net> wrote:>>>>>> Hello Team, >>>>>> >>>>>> I updated one of my host on my cluster and after it finish and >>>>>> try to>>>>>> activate the host it quickly claimed that the host was >>>>>> unresponsive and>>>>>> it fenced the host... Now every time I try to >>>>>> activate the >>>>>> host it>>>>>> clames that is unresponsive and proceeds to fence it... >>>>>> This was >>>>>> not>>>>>> happening before the update >>>>>> The host is reachable with no problems nor issues... >>>>>> >>>>>> Any ideas? >>>>>> >>>>>> Centos 7.4 x86_64 host. >>>>>> Attached is the vdsm log >>>>>> >>>>>> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >>>>>> >>>>>> Regards, >>>>>> >>>>>> -- >>>>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org>>>>>> >>>>>> ___ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>> >>>> _ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >>> ___ Users mailing list >>> Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>>>> > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host fencing issues
You where right. I was able to start it manually but its still doing the same thing after I try to activate the server it fenced the server and send a reboot... Here is the status: https://pastebin.com/xbXX8UBX -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 11:00 AM, Dafna Ron wrote: > this suggests that libvirt is down. > can you please check libvirtd service status and get the log for it?> > > Thanks, > Dafna > > On 10/13/2017 04:48 PM, Fernando Fuentes wrote: >> Team, >> >> I went to the log and capture the messages from when the host did the >> update all the way down to the failure.>> >> https://pastebin.com/AwP1gh5g >> >> >> I hope that helps narrowing down the issue.... >> Ideas, thoughts, and comments are welcome! >> >> Regards, >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: >>> Thanks for your reply. >>> >>> As requested I got this from the messages log: >>> >>> https://pastebin.com/t0HRhvT9 >>> >>> This one is from the host engine: >>> >>> https://pastebin.com/8vji6MGs >>> >>> And this one is from the host vdsm: >>> >>> https://pastebin.com/GgnqRvTE >>> >>> The funny part is that right when I did the update it seems that >>> vdsm died and there is no log after the update.>>> >>> On the messages lo you can see the errors and the attempts of me >>> trying to restart manually but it dies.>>> >>> Any ideas? >>> >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: >>>> can you please provide some logs to the issue? >>>> /var/log/ovirt-engine/engine.log from engine machine and >>>> /var/log/vdsm/vdsm.log from the affected host would be great start.>>>> >>>> thank you >>>> >>>> On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes >>>> <ffuen...@darktcp.net> wrote:>>>>> Hello Team, >>>>> >>>>> I updated one of my host on my cluster and after it finish and >>>>> try to>>>>> activate the host it quickly claimed that the host was >>>>> unresponsive and>>>>> it fenced the host... Now every time I try to >>>>> activate the host it>>>>> clames that is unresponsive and proceeds to >>>>> fence it... This >>>>> was not>>>>> happening before the update >>>>> The host is reachable with no problems nor issues... >>>>> >>>>> Any ideas? >>>>> >>>>> Centos 7.4 x86_64 host. >>>>> Attached is the vdsm log >>>>> >>>>> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org>>>>> >>>>> ___ >>>>> Users mailing list >>>>> Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>> >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> ___ Users mailing list >> Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host fencing issues
Team, I went to the log and capture the messages from when the host did the update all the way down to the failure. https://pastebin.com/AwP1gh5g I hope that helps narrowing down the issue Ideas, thoughts, and comments are welcome! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 10:03 AM, Fernando Fuentes wrote: > Thanks for your reply. > > As requested I got this from the messages log: > > https://pastebin.com/t0HRhvT9 > > This one is from the host engine: > > https://pastebin.com/8vji6MGs > > And this one is from the host vdsm: > > https://pastebin.com/GgnqRvTE > > The funny part is that right when I did the update it seems that vdsm > died and there is no log after the update.> > On the messages lo you can see the errors and the attempts of me > trying to restart manually but it dies.> > Any ideas? > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: >> can you please provide some logs to the issue? >> /var/log/ovirt-engine/engine.log from engine machine and >> /var/log/vdsm/vdsm.log from the affected host would be great start.>> >> thank you >> >> On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote:>>> Hello Team, >>> >>> I updated one of my host on my cluster and after it finish and >>> try to>>> activate the host it quickly claimed that the host was >>> unresponsive and>>> it fenced the host... Now every time I try to activate >>> the host it >>> clames that is unresponsive and proceeds to fence it... This was not>>> >>> happening before the update.... >>> The host is reachable with no problems nor issues... >>> >>> Any ideas? >>> >>> Centos 7.4 x86_64 host. >>> Attached is the vdsm log >>> >>> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org>>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Host fencing issues
Thanks for your reply. As requested I got this from the messages log: https://pastebin.com/t0HRhvT9 This one is from the host engine: https://pastebin.com/8vji6MGs And this one is from the host vdsm: https://pastebin.com/GgnqRvTE The funny part is that right when I did the update it seems that vdsm died and there is no log after the update. On the messages lo you can see the errors and the attempts of me trying to restart manually but it dies. Any ideas? -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Oct 13, 2017, at 01:42 AM, Tomas Jelinek wrote: > can you please provide some logs to the issue? > /var/log/ovirt-engine/engine.log from engine machine and > /var/log/vdsm/vdsm.log from the affected host would be great start.> > thank you > > On Fri, Oct 13, 2017 at 2:47 AM, Fernando Fuentes > <ffuen...@darktcp.net> wrote:>> Hello Team, >> >> I updated one of my host on my cluster and after it finish and >> try to>> activate the host it quickly claimed that the host was >> unresponsive and>> it fenced the host... Now every time I try to activate >> the host it >> clames that is unresponsive and proceeds to fence it... This was not>> >> happening before the update >> The host is reachable with no problems nor issues... >> >> Any ideas? >> >> Centos 7.4 x86_64 host. >> Attached is the vdsm log >> >> engine is oVirt Engine Version: 4.0.2.6-1.el7.centos >> >> Regards, >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org>> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDAgent
Sandro, Just wanted to report that after the full host upgrade everything return to normal. Thanks! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Feb 6, 2017, at 05:03 AM, Sandro Bonazzola wrote: > > > On Sat, Feb 4, 2017 at 9:59 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> Hello Sandro, >> Thanks for your reply! >> >> I will do that. I want to make sure though that updating the host >> will not make my guests loose the ability to use spice and nor will >> it create a problem with my oVirt Manager been on 4.0.X branch? > > Adding some people that may confirm but I think there shouldn't be any > regression on it. > >> >> >> Thanks! >> >> >> Regards, >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Fri, Feb 3, 2017, at 01:11 PM, Sandro Bonazzola wrote: >>> >>> >>> Il 30/Gen/2017 09:56 PM, "Fernando Fuentes" <ffuen...@darktcp.net> >>> ha scritto: >>>> __ >>>> Sandro, >>>> >>>> I did the update from the hosts tab on ovirt: >>>> The ovirt version is: oVirt Engine Version: 4.0.2.6-1.el7.centos >>>> >>> >>> >>> Sorry Fernando I missed your email. >>> I would suggest to update your hosts to centos 7.3 and oVirt 4.1. >>> If you don't want to upgrade to 4.1 please upgrade at least to >>> latest 4.0 which is 4.0.6. >>> >>> >>> >>> >>>> >>>> All of my hosts are Cent7 x86_64 >>>> [root@ogias ~]# uname -a >>>> Linux ogias.aasteel.net 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun >>>> 23 17:05:11 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux >>>> [root@ogias ~]# cat /etc/redhat-release >>>> CentOS Linux release 7.2.1511 (Core) >>>> [root@ogias ~]# >>>> >>>> I am trying to email you the sos report but it exceeds our mail >>>> server size limit :( >>>> >>>> Regards, >>>> >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> On Sat, Jan 28, 2017, at 12:29 PM, Sandro Bonazzola wrote: >>>>> >>>>> >>>>> Il 27/Gen/2017 16:51, "Fernando Fuentes" <ffuen...@darktcp.net> ha >>>>> scritto: >>>>>> Team, >>>>>> >>>>>> After a host update on my cluster, All of my Windows vm's running >>>>>> the >>>>>> vdagent from the ovirt tools are running at 100% CPU utilization. >>>>>> >>>>>> Any ideas why would this happen? >>>>> >>>>> Hi, >>>>> Can you please share details about the update? >>>>> Which distribution? What has been updated? Can you share a sos >>>>> report from the host? >>>>> >>>>> >>>>> >>>>>> >>>>>> Regards, >>>>>> >>>>>> >>>>>> -- >>>>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>>>>> ___ >>>>>> Users mailing list Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >> > > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community > collaboration. > See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDAgent
Hello Sandro, Thanks for your reply! I will do that. I want to make sure though that updating the host will not make my guests loose the ability to use spice and nor will it create a problem with my oVirt Manager been on 4.0.X branch? Thanks! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Feb 3, 2017, at 01:11 PM, Sandro Bonazzola wrote: > > > Il 30/Gen/2017 09:56 PM, "Fernando Fuentes" <ffuen...@darktcp.net> ha > scritto: >> __ >> Sandro, >> >> I did the update from the hosts tab on ovirt: >> The ovirt version is: oVirt Engine Version: 4.0.2.6-1.el7.centos >> > > > Sorry Fernando I missed your email. > I would suggest to update your hosts to centos 7.3 and oVirt 4.1. > If you don't want to upgrade to 4.1 please upgrade at least to latest > 4.0 which is 4.0.6. > > > > >> >> All of my hosts are Cent7 x86_64 >> [root@ogias ~]# uname -a >> Linux ogias.aasteel.net 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 >> 17:05:11 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux >> [root@ogias ~]# cat /etc/redhat-release >> CentOS Linux release 7.2.1511 (Core) >> [root@ogias ~]# >> >> I am trying to email you the sos report but it exceeds our mail >> server size limit :( >> >> Regards, >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Sat, Jan 28, 2017, at 12:29 PM, Sandro Bonazzola wrote: >>> >>> >>> Il 27/Gen/2017 16:51, "Fernando Fuentes" <ffuen...@darktcp.net> ha >>> scritto: >>>> Team, >>>> >>>> After a host update on my cluster, All of my Windows vm's >>>> running the >>>> vdagent from the ovirt tools are running at 100% CPU utilization. >>>> >>>> Any ideas why would this happen? >>> >>> Hi, >>> Can you please share details about the update? >>> Which distribution? What has been updated? Can you share a sos >>> report from the host? >>> >>> >>> >>>> >>>> Regards, >>>> >>>> >>>> -- >>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>>> ___ >>>> Users mailing list Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDAgent
Sandro, I did the update from the hosts tab on ovirt: The ovirt version is: oVirt Engine Version: 4.0.2.6-1.el7.centos All of my hosts are Cent7 x86_64 [root@ogias ~]# uname -a Linux ogias.aasteel.net 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 17:05:11 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@ogias ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@ogias ~]# I am trying to email you the sos report but it exceeds our mail server size limit :( Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sat, Jan 28, 2017, at 12:29 PM, Sandro Bonazzola wrote: > > > Il 27/Gen/2017 16:51, "Fernando Fuentes" <ffuen...@darktcp.net> ha > scritto: >> Team, >> >> After a host update on my cluster, All of my Windows vm's running the >> vdagent from the ovirt tools are running at 100% CPU utilization. >> >> Any ideas why would this happen? > > Hi, > Can you please share details about the update? > Which distribution? What has been updated? Can you share a sos report > from the host? > > > >> >> Regards, >> >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >> ___ >> Users mailing list Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VDAgent
Team, After a host update on my cluster, All of my Windows vm's running the vdagent from the ovirt tools are running at 100% CPU utilization. Any ideas why would this happen? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding Host Issue
Any body? :( -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jan 25, 2017, at 02:29 PM, Fernando Fuentes wrote: > For got to add my server log. > > http://pastebin.com/9PfASxqM > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Wed, Jan 25, 2017, at 02:25 PM, Fernando Fuentes wrote: > > Here a paste bin of my vdsm.log > > > > http://pastebin.com/YKbrpBur > > > > Regards, > > > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Wed, Jan 25, 2017, at 10:19 AM, Fernando Fuentes wrote: > > > I am adding a host to my cluster and is failing with: > > > > > > > > > Jan 25, 2017 10:18:02 AM > > > > > > > > > Failed to connect Host gigantes to Storage Pool HyperVirtDC > > > > > > Jan 25, 2017 10:18:01 AM > > > > > > > > > Host gigantes cannot access the Storage Domain(s) attached to > > > the Data Center HyperVirtDC. Setting Host state to Non-Operational. > > > > > > Jan 25, 2017 10:18:01 AM > > > > > > > > > VDSM gigantes command failed: Cannot find master domain: > > > u'spUUID=e13d5091-a60e-433e-86ed-bd36deb7ca50, > > > msdUUID=0e4ca0da-1721-4ea7-92af-25233a8679e0' > > > > > > Not sure why this is happening. > > > > > > Any ideas? > > > > > > Regards, > > > > > > > > > -- > > > Fernando Fuentes > > > ffuen...@txweather.org > > > http://www.txweather.org > > > ___ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding Host Issue
For got to add my server log. http://pastebin.com/9PfASxqM -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jan 25, 2017, at 02:25 PM, Fernando Fuentes wrote: > Here a paste bin of my vdsm.log > > http://pastebin.com/YKbrpBur > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Wed, Jan 25, 2017, at 10:19 AM, Fernando Fuentes wrote: > > I am adding a host to my cluster and is failing with: > > > > > > Jan 25, 2017 10:18:02 AM > > > > > > Failed to connect Host gigantes to Storage Pool HyperVirtDC > > > > Jan 25, 2017 10:18:01 AM > > > > > > Host gigantes cannot access the Storage Domain(s) attached to > > the Data Center HyperVirtDC. Setting Host state to Non-Operational. > > > > Jan 25, 2017 10:18:01 AM > > > > > > VDSM gigantes command failed: Cannot find master domain: > > u'spUUID=e13d5091-a60e-433e-86ed-bd36deb7ca50, > > msdUUID=0e4ca0da-1721-4ea7-92af-25233a8679e0' > > > > Not sure why this is happening. > > > > Any ideas? > > > > Regards, > > > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding Host Issue
Here a paste bin of my vdsm.log http://pastebin.com/YKbrpBur Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jan 25, 2017, at 10:19 AM, Fernando Fuentes wrote: > I am adding a host to my cluster and is failing with: > > > Jan 25, 2017 10:18:02 AM > > > Failed to connect Host gigantes to Storage Pool HyperVirtDC > > Jan 25, 2017 10:18:01 AM > > > Host gigantes cannot access the Storage Domain(s) attached to > the Data Center HyperVirtDC. Setting Host state to Non-Operational. > > Jan 25, 2017 10:18:01 AM > > > VDSM gigantes command failed: Cannot find master domain: > u'spUUID=e13d5091-a60e-433e-86ed-bd36deb7ca50, > msdUUID=0e4ca0da-1721-4ea7-92af-25233a8679e0' > > Not sure why this is happening. > > Any ideas? > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Adding Host Issue
I am adding a host to my cluster and is failing with: Jan 25, 2017 10:18:02 AM Failed to connect Host gigantes to Storage Pool HyperVirtDC Jan 25, 2017 10:18:01 AM Host gigantes cannot access the Storage Domain(s) attached to the Data Center HyperVirtDC. Setting Host state to Non-Operational. Jan 25, 2017 10:18:01 AM VDSM gigantes command failed: Cannot find master domain: u'spUUID=e13d5091-a60e-433e-86ed-bd36deb7ca50, msdUUID=0e4ca0da-1721-4ea7-92af-25233a8679e0' Not sure why this is happening. Any ideas? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hardware setup
If you have the need to save in power and in hardware than by all means go for it and do what fits you... Compute nodes should be treated as a disposable node, One goes out and you shouldn't have to worry much about it. The more you "hyperconverge" the more you are exposing your self to self-inflicted chaos (Complexity). I am the keep it simple and standard guy... Let the next guy be able to figure things out without having to pull hairs... Yes is the new thing, the new "Just DO IT!" In my peace of mind, Storage stays where it needs to be... On its own world of IOPS and Drives. I know what it is and where is going. Its just not my cup of tea (For now) My 2 Centavos. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Sep 9, 2016, at 12:38 PM, Fernando Frediani wrote: > What is the reason for ? A lot of stuff is moving into > Hyperconvergence and that saves a lot of hardware and power > consumption. > The only thing I would look with more caution is the amount of memory > Gluster itself consumes, but if there are enough resources in each > host for Distributed Storage + Compute stuff I see no problems with > that, unless someone has some strong technical reason for not. > Fernando > > On 09/09/2016 12:43, Fernando Fuentes wrote: >> Bryan, >> >> Just my opinion but I would separate storage away from your >> compute nodes. >> >> Regards, >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Fri, Sep 9, 2016, at 10:28 AM, Bryan Sockel wrote: >>> Hi, >>> >>> I am looking to put together a configuration setup for a new install >>> and was wondering if it is ok for have both gluster and ovirt >>> running on the same systems, or if it was better to separate my >>> storage on to anther platform? >>> >>> I am currently looking into 3 servers with 196 GB Ram, dual 6 core >>> proc's on each server. Gluster would be installed on each server >>> with a 3 way replica, ovirt would be running as an appliance and >>> each node would be part of the ovirt cluster. >>> >>> >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> ___ Users mailing list >> Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >> > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hardware setup
Bryan, Just my opinion but I would separate storage away from your compute nodes. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Sep 9, 2016, at 10:28 AM, Bryan Sockel wrote: > Hi, > > I am looking to put together a configuration setup for a new install > and was wondering if it is ok for have both gluster and ovirt running > on the same systems, or if it was better to separate my storage on to > anther platform? > > I am currently looking into 3 servers with 196 GB Ram, dual 6 core > proc's on each server. Gluster would be installed on each server with > a 3 way replica, ovirt would be running as an appliance and each node > would be part of the ovirt cluster. > > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ETL service sampling
Kasturi, I had the same issue and here is what Yaniv said: This can happen when the engine is down or very busy. This error seems to happen only sometimes, which indicates this is the case. Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary In my case my engine was very busy. Good luck! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Aug 24, 2016, at 04:03 AM, knarra wrote: > Hi All, > I see the event below getting logged in the events tab . What is > this event related to ? Why does this get logged as an error ? > ETL service sampling has encountered an error. Please consult the > service log for more details. > > Thanks > kasturi > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Not Updating Statistics
Yaniv, I think you got it right on. Once I fixed my GW issues (another email) and updated all my hosts in the cluster, The messages went away. Thank you all! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Aug 21, 2016, at 07:24 PM, Yaniv Dary wrote: > This can happen when the engine is down or very busy. This error seems > to happen only sometimes, which indicates this is the case. > Yaniv Dary > Technical Product Manager > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > Tel : +972 (9) 7692306 > 8272306 > Email: yd...@redhat.com > IRC : ydary > > On Aug 22, 2016 00:21, "Fernando Fuentes" > <ffuen...@darktcp.net> wrote: >> __ >> Shirly, >> >> Here is what I have: >> >> [root@hypervirt ~]# rpm -qa ovirt-engine-dwh >> ovirt-engine-dwh-4.0.2-1.el7.centos.noarch >> [root@hypervirt ~]# rpm -qa ovirt-engine >> ovirt-engine-4.0.2.6-1.el7.centos.noarch >> [root@hypervirt ~]# >> >> As requested the dwh log is attached. >> >> Regards, >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Sun, Aug 21, 2016, at 03:02 AM, Shirly Radco wrote: >>> Hi Fernando, Melissa >>> >>> What version are you using for engine and dwh? >>> >>> https://bugzilla.redhat.com/show_bug.cgi?id=1344935 >>> >>> Versions: ovirt-engine-dwh-setup-4.0.2-1.el7ev.noarch >>> ovirt-engine-setup-4.0.2.6-0.1.el7ev.noarch >>> >>> should not have this issue. >>> >>> Please update me if you still have this issue and attach the ovirt-engine- >>> dwh log. >>> >>> >>> Best regards, >>> >>> >>> Shirly Radco BI Software Engineer Red Hat Israel Ltd. 34 Jerusalem >>> Road Building A, 4th floor Ra'anana, Israel 4350109 >>> >>> On Sat, Aug 20, 2016 at 9:11 PM, Fernando Fuentes >>> <ffuen...@darktcp.net> wrote: >>>> __ >>>> Team, >>>> >>>> This is still an issue on my env. :( >>>> >>>> 2016-08-20 09:04:56|pIlSG1|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTi- >>>> meKeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt >>>> Engine is not updating the statistics. Please check your oVirt >>>> Engine status.|9704 >>>> 2016-08-20 10:57:42|3ZzN5z|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTi- >>>> meKeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt >>>> Engine is not updating the statistics. Please check your oVirt >>>> Engine status.|9704 >>>> 2016-08-20 11:31:33|reczvL|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTi- >>>> meKeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt >>>> Engine is not updating the statistics. Please check your oVirt >>>> Engine status.|9704 >>>> >>>> Any ideas? >>>> >>>> Thanks for the help! >>>> >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> >>>> On Thu, Aug 18, 2016, at 01:35 PM, Fernando Fuentes wrote: >>>>> I am having similar issues though my problem only started after >>>>> recovering my DWH DB. >>>>> But the errors are the sames as posted below. >>>>> >>>>> Any ideas? >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Fernando Fuentes >>>>> ffuen...@txweather.org >>>>> http://www.txweather.org >>>>> >>>>> >>>>> >>>>> On Wed, Aug 17, 2016, at 08:47 AM, Sandro Bonazzola wrote: >>>>>> Adding Shirly >>>>>> >>>>>> On Wed, Aug 17, 2016 at 3:30 PM, Melissa Mesler >>>>>> <meli...@justmelly.com> wrote: >>>>>>> All, we are running Ovirt 4.0 on CentOS 7. We have some errors >>>>>>> in our >>>>>>> dwh log. Look at the following: >>>>>>> >>>>>>> 2016-08-16 >>>>>>> 13:28:51|mFKcbP|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepin- >>>>>>> gJob|Default|5|tWarn|tWarn_1|Can >>>>>>> not sample data, oVirt Engine is not updating the statistics. >>>>>>> Please >&
Re: [ovirt-users] Not Updating Statistics
Shirly, Here is what I have: [root@hypervirt ~]# rpm -qa ovirt-engine-dwh ovirt-engine-dwh-4.0.2-1.el7.centos.noarch [root@hypervirt ~]# rpm -qa ovirt-engine ovirt-engine-4.0.2.6-1.el7.centos.noarch [root@hypervirt ~]# As requested the dwh log is attached. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Aug 21, 2016, at 03:02 AM, Shirly Radco wrote: > Hi Fernando, Melissa > > What version are you using for engine and dwh? > > https://bugzilla.redhat.com/show_bug.cgi?id=1344935 > > Versions: ovirt-engine-dwh-setup-4.0.2-1.el7ev.noarch > ovirt-engine-setup-4.0.2.6-0.1.el7ev.noarch > > should not have this issue. > > Please update me if you still have this issue and attach the ovirt-engine- > dwh log. > > > Best regards, > > > Shirly Radco BI Software Engineer Red Hat Israel Ltd. 34 Jerusalem > Road Building A, 4th floor Ra'anana, Israel 4350109 > > On Sat, Aug 20, 2016 at 9:11 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> Team, >> >> This is still an issue on my env. :( >> >> 2016-08-20 09:04:56|pIlSG1|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTime- >> KeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine >> is not updating the statistics. Please check your oVirt Engine >> status.|9704 >> 2016-08-20 10:57:42|3ZzN5z|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTime- >> KeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine >> is not updating the statistics. Please check your oVirt Engine >> status.|9704 >> 2016-08-20 11:31:33|reczvL|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTime- >> KeepingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine >> is not updating the statistics. Please check your oVirt Engine >> status.|9704 >> >> Any ideas? >> >> Thanks for the help! >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Thu, Aug 18, 2016, at 01:35 PM, Fernando Fuentes wrote: >>> I am having similar issues though my problem only started after >>> recovering my DWH DB. >>> But the errors are the sames as posted below. >>> >>> Any ideas? >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Wed, Aug 17, 2016, at 08:47 AM, Sandro Bonazzola wrote: >>>> Adding Shirly >>>> >>>> On Wed, Aug 17, 2016 at 3:30 PM, Melissa Mesler >>>> <meli...@justmelly.com> wrote: >>>>> All, we are running Ovirt 4.0 on CentOS 7. We have some errors >>>>> in our >>>>> dwh log. Look at the following: >>>>> >>>>> 2016-08-16 >>>>> 13:28:51|mFKcbP|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the statistics. >>>>> Please >>>>> check your oVirt Engine status.|9704 >>>>> 2016-08-16 >>>>> 19:31:00|dgTmvI|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the statistics. >>>>> Please >>>>> check your oVirt Engine status.|9704 >>>>> 2016-08-16 >>>>> 23:19:28|ByUf8M|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the statistics. >>>>> Please >>>>> check your oVirt Engine status.|9704 >>>>> 2016-08-17 >>>>> 00:27:59|jzRGar|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the statistics. >>>>> Please >>>>> check your oVirt Engine status.|9704 >>>>> 2016-08-17 >>>>> 02:55:01|WZ7M9t|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the statistics. >>>>> Please >>>>> check your oVirt Engine status.|9704 >>>>> 2016-08-17 >>>>> 04:12:06|Q237ie|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJ- >>>>> ob|Default|5|tWarn|tWarn_1|Can >>>>> not sample data, oVirt Engine is not updating the stat
Re: [ovirt-users] erros after upgrade
Team, Found my own answer. Thanks! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sat, Aug 20, 2016, at 02:29 PM, Fernando Fuentes wrote: > I think I found the issue. > It seems that moving the ovirtmgmt to a vlan without internet access > causes the update to fail (naturally) > I am trying to change the default route to my data vlan. > > Is there a how too on this? > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Thu, Aug 18, 2016, at 09:50 AM, Fernando Fuentes wrote: > > Thanks for your reply Simone! > > As requested please see attach. > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Thu, Aug 18, 2016, at 01:39 AM, Simone Tiraboschi wrote: > > > On Thu, Aug 18, 2016 at 5:53 AM, Fernando Fuentes <ffuen...@darktcp.net> > > > wrote: > > > > Anybody? :) > > > > > > Can you please share your engine.log ? > > > > > > > -- > > > > Fernando Fuentes > > > > ffuen...@txweather.org > > > > http://www.txweather.org > > > > > > > > On Mon, Aug 15, 2016, at 10:16 AM, Fernando Fuentes wrote: > > > >> Team, > > > >> > > > >> After upgrading to 4.0.2 I am starting to get the following errors: > > > >> > > > >> Failed to check for available updates on host NAME with message > > > >> 'Command returned failure code 1 during SSH session 'root@IP''. > > > >> > > > >> Do I need to update each hosts manually? > > > >> > > > >> Regards, > > > >> > > > >> -- > > > >> Fernando Fuentes > > > >> ffuen...@txweather.org > > > >> http://www.txweather.org > > > >> ___ > > > >> Users mailing list > > > >> Users@ovirt.org > > > >> http://lists.ovirt.org/mailman/listinfo/users > > > > ___ > > > > Users mailing list > > > > Users@ovirt.org > > > > http://lists.ovirt.org/mailman/listinfo/users > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > Email had 1 attachment: > > + engine.log > > 2.9M (text/x-log) > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] erros after upgrade
I think I found the issue. It seems that moving the ovirtmgmt to a vlan without internet access causes the update to fail (naturally) I am trying to change the default route to my data vlan. Is there a how too on this? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 18, 2016, at 09:50 AM, Fernando Fuentes wrote: > Thanks for your reply Simone! > As requested please see attach. > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Thu, Aug 18, 2016, at 01:39 AM, Simone Tiraboschi wrote: > > On Thu, Aug 18, 2016 at 5:53 AM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > > > Anybody? :) > > > > Can you please share your engine.log ? > > > > > -- > > > Fernando Fuentes > > > ffuen...@txweather.org > > > http://www.txweather.org > > > > > > On Mon, Aug 15, 2016, at 10:16 AM, Fernando Fuentes wrote: > > >> Team, > > >> > > >> After upgrading to 4.0.2 I am starting to get the following errors: > > >> > > >> Failed to check for available updates on host NAME with message > > >> 'Command returned failure code 1 during SSH session 'root@IP''. > > >> > > >> Do I need to update each hosts manually? > > >> > > >> Regards, > > >> > > >> -- > > >> Fernando Fuentes > > >> ffuen...@txweather.org > > >> http://www.txweather.org > > >> ___ > > >> Users mailing list > > >> Users@ovirt.org > > >> http://lists.ovirt.org/mailman/listinfo/users > > > ___ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > Email had 1 attachment: > + engine.log > 2.9M (text/x-log) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Not Updating Statistics
Team, This is still an issue on my env. :( 2016-08-20 09:04:56|pIlSG1|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKee- pingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine is not updating the statistics. Please check your oVirt Engine status.|9704 2016-08-20 10:57:42|3ZzN5z|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKee- pingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine is not updating the statistics. Please check your oVirt Engine status.|9704 2016-08-20 11:31:33|reczvL|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKee- pingJob|Default|5|tWarn|tWarn_1|Can not sample data, oVirt Engine is not updating the statistics. Please check your oVirt Engine status.|9704 Any ideas? Thanks for the help! -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 18, 2016, at 01:35 PM, Fernando Fuentes wrote: > I am having similar issues though my problem only started after > recovering my DWH DB. > But the errors are the sames as posted below. > > Any ideas? > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Wed, Aug 17, 2016, at 08:47 AM, Sandro Bonazzola wrote: >> Adding Shirly >> >> On Wed, Aug 17, 2016 at 3:30 PM, Melissa Mesler >> <meli...@justmelly.com> wrote: >>> All, we are running Ovirt 4.0 on CentOS 7. We have some errors >>> in our >>> dwh log. Look at the following: >>> >>> 2016-08-16 >>> 13:28:51|mFKcbP|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-16 >>> 19:31:00|dgTmvI|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-16 >>> 23:19:28|ByUf8M|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-17 >>> 00:27:59|jzRGar|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-17 >>> 02:55:01|WZ7M9t|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-17 >>> 04:12:06|Q237ie|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> 2016-08-17 >>> 04:46:12|8COWHX|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >>> |Default|5|tWarn|tWarn_1|Can >>> not sample data, oVirt Engine is not updating the statistics. Please >>> check your oVirt Engine status.|9704 >>> >>> What does this mean? >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> -- >> Sandro Bonazzola >> Better technology. Faster innovation. Powered by community >> collaboration. >> See how it works at redhat.com >> _ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.5 / 3.6 stuck
Erik, Awesome! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 18, 2016, at 08:22 PM, Erik Brakke wrote: > Fernando, thanks! That did it! > - added the ovirt 3.6 repo to the host > - tried to update vdsm but had complaints about no glusterfs >= 3.7.x > available > - glusterfs 3.7.11 seems to be the latest with FC22 packages, so added > that as a repo > - vdsm updated as expected > - reinstalled host from GUI > - fired right up > > Ya saved me! > > On Wed, Aug 17, 2016 at 10:23 PM Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> Erik, >> >> I had a similar issue in the past. I think that updating vdsm on >> your host can do the trick. >> Put your host on maintenance mode and upgrade your host to 3.6. >> >> Make sure you install the 3.6 repos. >> >> Good luck! >> >> Regards, >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> On Wed, Aug 17, 2016, at 09:45 PM, Erik Brakke wrote: >>> Hello, >>> I changed my cluster and data center compatibility from 3.5 to 3.6 >>> with a 3.5 host. D'oh! >>> Engine: 3.6 on FC22 >>> Host: 3.5 on FC22 (local storage) >>> >>> - Can I change the data center and cluster back to 3.5? How? >>> - I tried to upgrade host to 3.6 in the GUI. Maintenance->Reinstall >>> did not work, and Upgrade option is greyed out. Is there a way to >>> upgrade host to 3.6? >>> >>> Thanks >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.6 : VLAN / non VLAN
the packets outgoing from em2.25 are tagged, right ? Yes. the packets outgoing from em2 are tagged or not? Not. the result is packets inside ovirt are tagged, but when you go out of it and reach something from em2, are the packets still tagged ? When a packet crosses one vlan to another the switch does it magic with vlan forwarding and routes. Simple answer is that em2 does not see the tag but packets can reach em2 if you have your switch configure to allow this. If not than only traffic with tag 35 can talk to each other. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 18, 2016, at 10:57 AM, Alexis HAUSER wrote: > hi, > > I'd like to know what happens when you create a new network, tagged with > VLAN for example 25 and using em2 : > - the packets outgoing from em2.25 are tagged, right ? > - the packets outgoing from em2 are tagged or not ? > - the result is packets inside ovirt are tagged, but when you go out of > it and reach something from em2, are the packets still tagged ? > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Not Updating Statistics
I am having similar issues though my problem only started after recovering my DWH DB. But the errors are the sames as posted below. Any ideas? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Aug 17, 2016, at 08:47 AM, Sandro Bonazzola wrote: > Adding Shirly > > On Wed, Aug 17, 2016 at 3:30 PM, Melissa Mesler > <meli...@justmelly.com> wrote: >> All, we are running Ovirt 4.0 on CentOS 7. We have some errors in our >> dwh log. Look at the following: >> >> 2016-08-16 >> 13:28:51|mFKcbP|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-16 >> 19:31:00|dgTmvI|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-16 >> 23:19:28|ByUf8M|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-17 >> 00:27:59|jzRGar|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-17 >> 02:55:01|WZ7M9t|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-17 >> 04:12:06|Q237ie|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> 2016-08-17 >> 04:46:12|8COWHX|2EMUyU|snSJCy|OVIRT_ENGINE_DWH|SampleTimeKeepingJob- >> |Default|5|tWarn|tWarn_1|Can >> not sample data, oVirt Engine is not updating the statistics. Please >> check your oVirt Engine status.|9704 >> >> What does this mean? >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community > collaboration. > See how it works at redhat.com > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] erros after upgrade
Anybody? :) -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Aug 15, 2016, at 10:16 AM, Fernando Fuentes wrote: > Team, > > After upgrading to 4.0.2 I am starting to get the following errors: > > Failed to check for available updates on host NAME with message > 'Command returned failure code 1 during SSH session 'root@IP''. > > Do I need to update each hosts manually? > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.5 / 3.6 stuck
Erik, I had a similar issue in the past. I think that updating vdsm on your host can do the trick. Put your host on maintenance mode and upgrade your host to 3.6. Make sure you install the 3.6 repos. Good luck! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Aug 17, 2016, at 09:45 PM, Erik Brakke wrote: > Hello, > I changed my cluster and data center compatibility from 3.5 to 3.6 > with a 3.5 host. D'oh! > Engine: 3.6 on FC22 > Host: 3.5 on FC22 (local storage) > > - Can I change the data center and cluster back to 3.5? How? > - I tried to upgrade host to 3.6 in the GUI. Maintenance->Reinstall > did not work, and Upgrade option is greyed out. Is there a way to > upgrade host to 3.6? > > Thanks > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Reports
Yaniv, Thanks for the reply. Didi, Dully noted! Thank you all for the reply. I got it all fixed. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Tue, Aug 16, 2016, at 12:56 AM, Yaniv Dary wrote: > This looks like a DWH, not a reports issue. Are you sure you only > install reports remotely? > > Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem > Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) > 7692306 8272306 Email: yd...@redhat.com IRC : ydary > > On Tue, Aug 16, 2016 at 8:48 AM, Yedidyah Bar David > <d...@redhat.com> wrote: >> On Tue, Aug 16, 2016 at 12:09 AM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote: >> > David, >> >> (Actually it's "Yedidyah" or "Didi", "Bar David" is my surname) >> >> >> > >> > After an attempt to run this remote setup something went really >> > wrong >> > and my dwh went fubar on my ovirt 4.0 >> > >> > I got: >> > >> > 2016-08-15 16:03:34|ETL Service Started >> > ovirtEngineDbDriverClass|org.postgresql.Driver >> > ovirtEngineHistoryDbJdbcConnection|jdbc:postgresql://localhost:54- >> > 32/ovirt_engine_history?sslfactory=org.postgresql.ssl.NonValidati- >> > ngFactory >> > hoursToKeepDaily|43800 >> > hoursToKeepHourly|1440 >> > ovirtEngineDbPassword|** >> > runDeleteTime|3 >> > ovirtEngineDbJdbcConnection|jdbc:postgresql://localhost:5432/engi- >> > ne?sslfactory=org.postgresql.ssl.NonValidatingFactory >> > runInterleave|20 >> > limitRows|limit 1000 >> > ovirtEngineHistoryDbUser|ovirt_engine_history >> > ovirtEngineDbUser|engine >> > deleteIncrement|10 >> > timeBetweenErrorEvents|30 >> > hoursToKeepSamples|24 >> > deleteMultiplier|1000 >> > lastErrorSent|2011-07-03 12:46:47.00 >> > etlVersion|4.0.2 >> > dwhAggregationDebug|false >> > dwhUuid|759f3eb5-5072-4c28-9686-a363eb956077 >> > ovirtEngineHistoryDbDriverClass|org.postgresql.Driver >> > ovirtEngineHistoryDbPassword|** >> > Exception in component tJDBCInput_2 >> > org.postgresql.util.PSQLException: ERROR: relation >> > "history_configuration" does not exist >> > Position: 65 >> > at >> > org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResp- >> > onse(QueryExecutorImpl.java:2157) >> > at >> > org.postgresql.core.v3.QueryExecutorImpl.processResults(Q- >> > ueryExecutorImpl.java:1886) >> > at >> > org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExe- >> > cutorImpl.java:255) >> > at >> > org.postgresql.jdbc2.AbstractJdbc2Statement.execute(Abstr- >> > actJdbc2Statement.java:555) >> > at >> > org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFl- >> > ags(AbstractJdbc2Statement.java:403) >> > at >> > org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery(- >> > AbstractJdbc2Statement.java:283) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.tJDBCInput_2Process(MinimalVersionCheck.java:1574) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.tJDBCInput_1Process(MinimalVersionCheck.java:1229) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.tJDBCConnection_2Process(MinimalVersionCheck.java:782) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.tJDBCConnection_1Process(MinimalVersionCheck.java:657) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.runJobInTOS(MinimalVersionCheck.java:3089) >> > at >> > ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCh- >> > eck.runJob(MinimalVersionCheck.java:2853) >> > at >> > ovirt_engine_dwh.historyetl_4_0.HistoryETL.tRunJob_2Proce- >> > ss(HistoryETL.java:8009) >> > at >> > ovirt_engine_dwh.historyetl_4_0.HistoryETL$3.run(HistoryE- >> > TL.java:11520) >> > 2016-0
Re: [ovirt-users] restore db table
a restore of the dwhdb did the trick. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Aug 15, 2016, at 04:35 PM, Fernando Fuentes wrote: > Looks like running a remote reports wiped my reports table. > > postgres=# \list > List of databases > Name |Owner | Encoding | Collate | >Ctype| Access privileges > --+--+--+-+-+--- > engine | engine | UTF8 | en_US.UTF-8 | > en_US.UTF-8 | > ovirt_engine_history | ovirt_engine_history | UTF8 | en_US.UTF-8 | > en_US.UTF-8 | > postgres | postgres | UTF8 | en_US.UTF-8 | > en_US.UTF-8 | > template0| postgres | UTF8 | en_US.UTF-8 | > en_US.UTF-8 | =c/postgres + > | | | | > | postgres=CTc/postgres > template1| postgres | UTF8 | en_US.UTF-8 | > en_US.UTF-8 | =c/postgres + > | | | | > | postgres=CTc/postgres > (5 rows) > > postgres=# \c ovirt_engine_history; > You are now connected to database "ovirt_engine_history" as user > "postgres". > ovirt_engine_history=# \dt > No relations found. > ovirt_engine_history=# > > Is there a way to just restore that table? > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] restore db table
Looks like running a remote reports wiped my reports table. postgres=# \list List of databases Name |Owner | Encoding | Collate | Ctype| Access privileges --+--+--+-+-+--- engine | engine | UTF8 | en_US.UTF-8 | en_US.UTF-8 | ovirt_engine_history | ovirt_engine_history | UTF8 | en_US.UTF-8 | en_US.UTF-8 | postgres | postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | template0| postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | =c/postgres + | | | | | postgres=CTc/postgres template1| postgres | UTF8 | en_US.UTF-8 | en_US.UTF-8 | =c/postgres + | | | | | postgres=CTc/postgres (5 rows) postgres=# \c ovirt_engine_history; You are now connected to database "ovirt_engine_history" as user "postgres". ovirt_engine_history=# \dt No relations found. ovirt_engine_history=# Is there a way to just restore that table? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Reports
David, After an attempt to run this remote setup something went really wrong and my dwh went fubar on my ovirt 4.0 I got: 2016-08-15 16:03:34|ETL Service Started ovirtEngineDbDriverClass|org.postgresql.Driver ovirtEngineHistoryDbJdbcConnection|jdbc:postgresql://localhost:5432/ovirt_engine_history?sslfactory=org.postgresql.ssl.NonValidatingFactory hoursToKeepDaily|43800 hoursToKeepHourly|1440 ovirtEngineDbPassword|** runDeleteTime|3 ovirtEngineDbJdbcConnection|jdbc:postgresql://localhost:5432/engine?sslfactory=org.postgresql.ssl.NonValidatingFactory runInterleave|20 limitRows|limit 1000 ovirtEngineHistoryDbUser|ovirt_engine_history ovirtEngineDbUser|engine deleteIncrement|10 timeBetweenErrorEvents|30 hoursToKeepSamples|24 deleteMultiplier|1000 lastErrorSent|2011-07-03 12:46:47.00 etlVersion|4.0.2 dwhAggregationDebug|false dwhUuid|759f3eb5-5072-4c28-9686-a363eb956077 ovirtEngineHistoryDbDriverClass|org.postgresql.Driver ovirtEngineHistoryDbPassword|** Exception in component tJDBCInput_2 org.postgresql.util.PSQLException: ERROR: relation "history_configuration" does not exist Position: 65 at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2157) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1886) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:255) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:555) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:403) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery(AbstractJdbc2Statement.java:283) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.tJDBCInput_2Process(MinimalVersionCheck.java:1574) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.tJDBCInput_1Process(MinimalVersionCheck.java:1229) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.tJDBCConnection_2Process(MinimalVersionCheck.java:782) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.tJDBCConnection_1Process(MinimalVersionCheck.java:657) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.runJobInTOS(MinimalVersionCheck.java:3089) at ovirt_engine_dwh.minimalversioncheck_4_0.MinimalVersionCheck.runJob(MinimalVersionCheck.java:2853) at ovirt_engine_dwh.historyetl_4_0.HistoryETL.tRunJob_2Process(HistoryETL.java:8009) at ovirt_engine_dwh.historyetl_4_0.HistoryETL$3.run(HistoryETL.java:11520) 2016-08-15 16:03:34|NAl0ai|349e7f|349e7f|OVIRT_ENGINE_DWH|MinimalVersionCheck|Default|6|Java Exception|tJDBCInput_2|org.postgresql.util.PSQLException:ERROR: relation "history_configuration" does not exist Position: 65|1 Exception in component tRunJob_2 java.lang.RuntimeException: Child job running failed at ovirt_engine_dwh.historyetl_4_0.HistoryETL.tRunJob_2Process(HistoryETL.java:8032) at ovirt_engine_dwh.historyetl_4_0.HistoryETL$3.run(HistoryETL.java:11520) 2016-08-15 16:03:34|349e7f|349e7f|349e7f|OVIRT_ENGINE_DWH|HistoryETL|Default|6|Java Exception|tRunJob_2|java.lang.RuntimeException:Child job running failed|1 2016-08-15 16:03:34|ETL Service Stopped Can you please help? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Aug 15, 2016, at 10:16 AM, Fernando Fuentes wrote: > Thanks David! > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Mon, Aug 15, 2016, at 12:31 AM, Yedidyah Bar David wrote: > > On Sun, Aug 14, 2016 at 6:57 PM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > > > David, > > > > > > Thats exactly what I am trying to accomplish. > > > When I re-run the ovirt setup on my 3.6 system, I give it the IP of my > > > ovirt 4.0 machine, Do I leave the DB to the default name? Is there a db > > > user and password on the 4.0 machine? > > > > > > Sorry for so many questions... This is not documented... > > > > Not for 3.6 vs 4.0, but it actually is, here: > > > > http://www.ovirt.org/develop/release-management/features/engine/separate-reports-host/ > > > > See also: > > > > http://www.ovirt.org/develop/release-management/features/engine/separate-dwh-host/ > > > > In above, each of engine, dwh, reports is in its own machine. > > You can do a similar thing with engine+dwh on one and reports on another. > > > > Do not hesitate ping back if you are stuck! > > > > Best, > > > > > > > > Th
Re: [ovirt-users] oVirt Reports
Thanks David! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Aug 15, 2016, at 12:31 AM, Yedidyah Bar David wrote: > On Sun, Aug 14, 2016 at 6:57 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > David, > > > > Thats exactly what I am trying to accomplish. > > When I re-run the ovirt setup on my 3.6 system, I give it the IP of my > > ovirt 4.0 machine, Do I leave the DB to the default name? Is there a db > > user and password on the 4.0 machine? > > > > Sorry for so many questions... This is not documented... > > Not for 3.6 vs 4.0, but it actually is, here: > > http://www.ovirt.org/develop/release-management/features/engine/separate-reports-host/ > > See also: > > http://www.ovirt.org/develop/release-management/features/engine/separate-dwh-host/ > > In above, each of engine, dwh, reports is in its own machine. > You can do a similar thing with engine+dwh on one and reports on another. > > Do not hesitate ping back if you are stuck! > > Best, > > > > > Thank you for all the help! > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Sun, Aug 14, 2016, at 02:01 AM, Yedidyah Bar David wrote: > >> On Sat, Aug 13, 2016 at 10:38 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Team, > >> > > >> > I got two oVirt Servers. One in 4.0.2 and one in 3.6.X > >> > I love the new 4.0 dashboard, But I need a way to continue to build > >> > reports with ease, 3.6 Can do this with ovirt-reports. How can I make my > >> > oVirt 4.0.2 send data for reports to my ovirt reports on 3.6? > >> > > >> > Thanks for the help team! > >> > >> I didn't try this myself, but pointing your reports setup to the 4.0 dwh > >> database should work. If you have problems, please give more details - > >> it's not clear what exactly you have on each machine. > >> > >> Generally speaking, oVirt does not currently provide tools to make > >> the engine or dwh "send data" elsewhere (a 3.6 reports or whatever). > >> You can try doing this yourself using generic postgresql means/tools. > >> > >> Best > >> -- > >> Didi > > > > -- > Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] erros after upgrade
Team, After upgrading to 4.0.2 I am starting to get the following errors: Failed to check for available updates on host ogias with message 'Command returned failure code 1 during SSH session 'root@IP''. Do I need to update each hosts manually? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Reports
David, Thats exactly what I am trying to accomplish. When I re-run the ovirt setup on my 3.6 system, I give it the IP of my ovirt 4.0 machine, Do I leave the DB to the default name? Is there a db user and password on the 4.0 machine? Sorry for so many questions... This is not documented... Thank you for all the help! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Aug 14, 2016, at 02:01 AM, Yedidyah Bar David wrote: > On Sat, Aug 13, 2016 at 10:38 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Team, > > > > I got two oVirt Servers. One in 4.0.2 and one in 3.6.X > > I love the new 4.0 dashboard, But I need a way to continue to build > > reports with ease, 3.6 Can do this with ovirt-reports. How can I make my > > oVirt 4.0.2 send data for reports to my ovirt reports on 3.6? > > > > Thanks for the help team! > > I didn't try this myself, but pointing your reports setup to the 4.0 dwh > database should work. If you have problems, please give more details - > it's not clear what exactly you have on each machine. > > Generally speaking, oVirt does not currently provide tools to make > the engine or dwh "send data" elsewhere (a 3.6 reports or whatever). > You can try doing this yourself using generic postgresql means/tools. > > Best > -- > Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Reports
Team, I got two oVirt Servers. One in 4.0.2 and one in 3.6.X I love the new 4.0 dashboard, But I need a way to continue to build reports with ease, 3.6 Can do this with ovirt-reports. How can I make my oVirt 4.0.2 send data for reports to my ovirt reports on 3.6? Thanks for the help team! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 4.0.2 RC
Thanks Sandro! -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Aug 12, 2016, at 06:59 AM, Sandro Bonazzola wrote: > > > On Fri, Aug 12, 2016 at 4:07 AM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> So I went to do an update to my ovirt system and found that the RC is >> coming down to my production box... IE: 4.0.2 >> >> I did a repo list and found - centos-ovirt40-candidate > > please yum update ovirt-release40 > Anyway, it's safe up to now since candidate contains same versions as > in release, 4.0.2 has been released this morning from RC without > changes. > > > >> >> >> Than found that 4.0.2 its also coming down from the ovirt-4.0 repo... >> >> ovirt-engine-sdk-python noarch 3.6.8.0-1.el7 >> centos-ovirt40-candidate 480 k >> ovirt-release40noarch 4.0.2-2 >> ovirt-4.0 >> 8.3 k >> ovirt-vmconsole noarch 1.0.4-1.el7 >> centos-ovirt40-candidate 29 k >> ovirt-vmconsole-proxy noarch 1.0.4-1.el7 >> centos-ovirt40-candidate 17 k >> python-ovirt-engine-sdk4 x86_64 4.0.0-0.5.a5.el7 >> centos-ovirt40-candidate 308 k >> >> Is this safe to upgrade? >> >> Regards, >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >> ___ >> Users mailing list Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community > collaboration. > See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt 4.0.2 RC
So I went to do an update to my ovirt system and found that the RC is coming down to my production box... IE: 4.0.2 I did a repo list and found - centos-ovirt40-candidate Than found that 4.0.2 its also coming down from the ovirt-4.0 repo... ovirt-engine-sdk-python noarch 3.6.8.0-1.el7 centos-ovirt40-candidate 480 k ovirt-release40noarch 4.0.2-2 ovirt-4.0 8.3 k ovirt-vmconsole noarch 1.0.4-1.el7 centos-ovirt40-candidate 29 k ovirt-vmconsole-proxy noarch 1.0.4-1.el7 centos-ovirt40-candidate 17 k python-ovirt-engine-sdk4x86_64 4.0.0-0.5.a5.el7 centos-ovirt40-candidate 308 k Is this safe to upgrade? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] time zone
To All, Thanks for the reply. You might be right on the old out dated guest tools. Updating them now. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 11, 2016, at 03:05 AM, Vinzenz Feenstra wrote: > > > On Aug 11, 2016, at 8:39 AM, Michal Skrivanek <michal.skriva...@redhat.com> > > wrote: > > > > > >> On 10 Aug 2016, at 21:15, Fernando Fuentes <ffuen...@darktcp.net> wrote: > >> > >> Team, > >> > >> My vms are coming up with an exclamation mark saying that the guest time > >> zone differs from the configuration. > >> > >> My linux vms are not doing this. Only my windows vm. > >> > >> On windows I have it set for CST just like the configuration. > > > > sounds ok > > > >> The hosts are on CST as well. > > > > host TZ doesn’t matter, it’s comparing setting in oVirt VM dialog with what > > the guest agent sees inside the VM > > > >> Any ideas? > > > > Most often it’s obsolete/old/outdated guest tools > or missing > > > > Thanks, > > michal > > > >> > >> This is Ovirt 4.0.1 > >> > >> Regards, > >> > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] time zone
Team, My vms are coming up with an exclamation mark saying that the guest time zone differs from the configuration. My linux vms are not doing this. Only my windows vm. On windows I have it set for CST just like the configuration. The hosts are on CST as well. Any ideas? This is Ovirt 4.0.1 Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] management interface
Edy, Just wanted to report back that I made all changes and all worked as expected. I took your advice and left the ovritmgmt interface alone and didn't tag it. All I did was move it to another interface and re-ip it. The interface was tagged at the chassis. Thanks again. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Aug 5, 2016, at 12:50 PM, Edward Haas wrote: > > > On Thu, Aug 4, 2016 at 11:50 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> Edward, >> >> I am sorry that the diagram was not clear enough. >> >> There is two bonds (4 phisical nic's, each pair is LACP). One for >> mgmt traffic only and one to carry untag and tag traffic. >> But I do understand your point. >> I will try to separate this and have everything on its own >> access port. >> >> To move my current ovirtmgmt interface to a new one all I have to do >> is create one and assign it and remove the old one correct? >> Thanks again! > > Separating the management to its own bond and everything else to a > second bond sounds reasonable. > So in this case, it will be less risky to just leave the ovirtmgmt as > is and move the other networks to the other bond. > If the current ovirtmgmt is on a non-vlan network, just set the switch > that connects to this bond slaves as access ports of vlan 35. > It is preferable not to play too much with the management network, as > you may loose the host (although VDSM has a safety > process in place that will revert the change in case Engine-Host > connectivity is lost). > If you prefer to move ovirtmgmt, make sure you perform the network > detach and attach steps (including any VLAN changes) > in one transaction (change what you need and then do an apply for > everything). > Thanks, > Edy. > >> >> >> >> Regards, >> >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Thu, Aug 4, 2016, at 02:07 AM, Edward Haas wrote: >>> Hi Fernando, >>> From what I could understand, you would like to have 3 networks, all >>> on the same bond: >>> (I do not understand from the diagram that you have two bonds, you >>> mentioned only bond0) >>> - ovirtmgmt - vlan35@bond0 >>> - dmz vm network - vlan42@bond0 >>> - default vm network - untag@bond0 >>> >>> Based on the tag, traffic that enters bond0 will be forwarded to the >>> relevant network. >>> Any traffic that enters bond0 and is either untag or has a tag that >>> does not correspond to the defined vlans, >>> will be forwarded to the non-vlan network (default vm in this case). >>> Note that when packets pass a vlan interface, they are stripped of >>> their tag. >>> >>> I personally consider a mix of tag and untag on the same iface/port >>> as bad practice, but there may be reasons to >>> choose it. If you can, try having all networks with vlans, and set >>> the switch ports correctly to reflect that. >>> Any other device on the network, like the router, can be connected >>> to the switch to an access port (say of vlan 100), >>> so traffic there is untag, and when traffic goes to the ovirt host, >>> it will go tagged 100. >>> Thanks, >>> Edy. >>> >>> On Tue, Aug 2, 2016 at 9:22 PM, Fernando Fuentes >>> <ffuen...@darktcp.net> wrote: >>>> __ >>>> I answer my own question. >>>> "I think" lol >>>> >>>> I am going to create a new ovirtmgmt logical network with a vlan >>>> tag and than move my hosts in to it for management. This interface >>>> is not part of the vm network. >>>> >>>> The rest of the logical networks with vlans will be tagged and part >>>> of the vm network. >>>> I think that logic is right. >>>> Thoughts? >>>> >>>> >>>> Regards, >>>> >>>> >>>> -- >>>> Fernando Fuentes >>>> ffuen...@txweather.org >>>> http://www.txweather.org >>>> >>>> >>>> >>>> >>>> On Sun, Jul 31, 2016, at 11:43 PM, Fernando Fuentes wrote: >>>>> Right now as we stand boht ovirt management and LAN data crosses >>>>> the same interface. >>>>> I have two bonds. I want to move ovirt management to its own bond >>>>> and tag it with vlan id 35. >>>>> >>>>> Than I wan to m
Re: [ovirt-users] management interface
Edward, I am sorry that the diagram was not clear enough. There is two bonds (4 phisical nic's, each pair is LACP). One for mgmt traffic only and one to carry untag and tag traffic. But I do understand your point. I will try to separate this and have everything on its own access port. To move my current ovirtmgmt interface to a new one all I have to do is create one and assign it and remove the old one correct? Thanks again! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Aug 4, 2016, at 02:07 AM, Edward Haas wrote: > Hi Fernando, > From what I could understand, you would like to have 3 networks, all > on the same bond: > (I do not understand from the diagram that you have two bonds, you > mentioned only bond0) > - ovirtmgmt - vlan35@bond0 > - dmz vm network - vlan42@bond0 > - default vm network - untag@bond0 > > Based on the tag, traffic that enters bond0 will be forwarded to the > relevant network. > Any traffic that enters bond0 and is either untag or has a tag that > does not correspond to the defined vlans, > will be forwarded to the non-vlan network (default vm in this case). > Note that when packets pass a vlan interface, they are stripped of > their tag. > > I personally consider a mix of tag and untag on the same iface/port as > bad practice, but there may be reasons to > choose it. If you can, try having all networks with vlans, and set the > switch ports correctly to reflect that. > Any other device on the network, like the router, can be connected to > the switch to an access port (say of vlan 100), > so traffic there is untag, and when traffic goes to the ovirt host, it > will go tagged 100. > Thanks, > Edy. > > On Tue, Aug 2, 2016 at 9:22 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> I answer my own question. >> "I think" lol >> >> I am going to create a new ovirtmgmt logical network with a vlan tag >> and than move my hosts in to it for management. This interface is not >> part of the vm network. >> >> The rest of the logical networks with vlans will be tagged and part >> of the vm network. >> I think that logic is right. >> Thoughts? >> >> >> Regards, >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Sun, Jul 31, 2016, at 11:43 PM, Fernando Fuentes wrote: >>> Right now as we stand boht ovirt management and LAN data crosses the >>> same interface. >>> I have two bonds. I want to move ovirt management to its own bond >>> and tag it with vlan id 35. >>> >>> Than I wan to move my LAN which has no tag and my dmz that does have >>> a tag in to my secondary bond. >>> >>> The switch is all configured what I am not sure is when making the >>> logical network do I make the LAN a "VM Network"? >>> And the same question for my dmz tagged vlan... >>> >>> I attached a small diagram that explains what I am trying to >>> accomplish... I hope :D >>> >>> >>> Thanks for the help. >>> >>> Regards, >>> >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Sun, Jul 31, 2016, at 12:50 PM, Edward Haas wrote: >>>> >>>> >>>> On Sun, Jul 31, 2016 at 7:19 PM, Fernando Fuentes >>>> <ffuen...@darktcp.net> wrote: >>>>> Team, >>>>> >>>>> Is it possible to move the ovirt management interface to a >>>>> separate vlan >>>>> and keep it from been on the same interface as my LAN? >>>> >>>> Networks, including the management one, can be assign as non-vlan >>>> or as vlan on >>>> different nics/bonds. >>>> If you want to assign two or more networks on the same nic/bond, >>>> only one can remain >>>> non-vlan, the rest must be set with a vlan. >>>> Vlan networks require that traffic entering the nic/bond is tagged, >>>> therefore, the switch port >>>> that the nic is connected to must be set as a trunk. >>>> If you have a specific setup in mind, please draw a network diagram >>>> for us. >>>> >>>>> >>>>> IE: assign a tag to ovirtmanagement and keep another interface as >>>>> untag >>>>> for my LAN to use with the VM's >>>>> >>>>> Thoughts ideas? >>>>> >>>>> TIA! >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>>>> ___ >>>>> Users mailing list Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> Email had 1 attachment: >>> * vlans.png 353k (image/png) >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] management interface
I answer my own question. "I think" lol I am going to create a new ovirtmgmt logical network with a vlan tag and than move my hosts in to it for management. This interface is not part of the vm network. The rest of the logical networks with vlans will be tagged and part of the vm network. I think that logic is right. Thoughts? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Jul 31, 2016, at 11:43 PM, Fernando Fuentes wrote: > Right now as we stand boht ovirt management and LAN data crosses the > same interface. > I have two bonds. I want to move ovirt management to its own bond and > tag it with vlan id 35. > > Than I wan to move my LAN which has no tag and my dmz that does have a > tag in to my secondary bond. > > The switch is all configured what I am not sure is when making the > logical network do I make the LAN a "VM Network"? > And the same question for my dmz tagged vlan... > > I attached a small diagram that explains what I am trying to > accomplish... I hope :D > > > Thanks for the help. > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Sun, Jul 31, 2016, at 12:50 PM, Edward Haas wrote: >> >> >> On Sun, Jul 31, 2016 at 7:19 PM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote: >>> Team, >>> >>> Is it possible to move the ovirt management interface to a >>> separate vlan >>> and keep it from been on the same interface as my LAN? >> >> Networks, including the management one, can be assign as non-vlan or >> as vlan on >> different nics/bonds. >> If you want to assign two or more networks on the same nic/bond, only >> one can remain >> non-vlan, the rest must be set with a vlan. >> Vlan networks require that traffic entering the nic/bond is tagged, >> therefore, the switch port >> that the nic is connected to must be set as a trunk. >> If you have a specific setup in mind, please draw a network diagram >> for us. >> >>> >>> IE: assign a tag to ovirtmanagement and keep another interface >>> as untag >>> for my LAN to use with the VM's >>> >>> Thoughts ideas? >>> >>> TIA! >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>> ___ >>> Users mailing list Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > Email had 1 attachment: > * vlans.png 353k (image/png) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, I found something very interesting. When exporting the same vms and templates and than importing them to a new cluster running ovirt 4.0 that has iSCSI mounts ONLY, they import and run just fine. I notice that the disk imported as Blank templates and they do not seem to have any dependency to the templates. Is this normal behavior? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Jul 28, 2016, at 09:01 AM, Fernando Fuentes wrote: > Nir, > > I been busy and have not been able to replicate your request. > > I will as soon as I get a chance I will. > > Thanks again for the help. > > Regards, > > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Tue, Jul 19, 2016, at 08:54 AM, Fernando Fuentes wrote: > > Nir, > > > > Thanks for all the help! > > I am on it and will reply with the requested info asap. > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Tue, Jul 19, 2016, at 07:16 AM, Nir Soffer wrote: > > > On Mon, Jul 18, 2016 at 11:16 PM, Fernando Fuentes <ffuen...@darktcp.net> > > > wrote: > > > > Ops... forgot the link: > > > > > > > > http://pastebin.com/LereJgyw > > > > > > > > The requested infor is in the pastebin. > > > > > > So the issue is clear now, the template on NFS is using raw format, and > > > on block > > > stoage, qcow format: > > > > > > NFS: > > > > > > root@zeta ~]# cat > > > /rhev/data-center/mnt/172.30.10.5\:_opt_libvirtd_images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f- > > > ... > > > FORMAT=RAW > > > ... > > > > > > [root@alpha ~]# qemu-img info > > > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > > > image: > > > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > > > ... > > > file format: raw > > > ... > > > > > > iSCSI: > > > > > > [root@zeta ~]# qemu-img info > > > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > > > image: > > > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > > > ... > > > file format: qcow2 > > > ... > > > > > > [root@zeta ~]# dd > > > if=/dev/0ef17024-0eae-4590-8eea-6ec8494fe223/metadata bs=512 skip=4 > > > count=1 iflag=direct > > > ... > > > FORMAT=COW > > > ... > > > > > > This format conversion is expected, as we don't support raw/sparse on > > > block storage. > > > > > > It looks like the vm is started with the template disk as "raw" > > > format, which is expected > > > to fail when the format is actually "qcow2". The guest will see the > > > qcow headers instead > > > of the actual data. > > > > > > The next step to debug this is: > > > > > > 1. Copy a disk using this template to the block storage domain > > > 2. Create a new vm using this disk > > > 3. Start the vm > > > > > > Does it start? if not, attach engine and vdsm logs from this timefame. > > > > > > If this works, you can try: > > > > > > 1. Move vm disk from NFS to block storage > > > 2. Start the vm > > > > > > Again, it it does not work, add engine and vdsm logs. > > > > > > Nir > > > > > > > > > > > Regards, > > > > > > > > > > > > -- > > > > Fernando Fuentes > > > > ffuen...@txweather.org > > > > http://www.txweather.org > > > > > > > > > > > > > > > > On Mon, Jul 18, 2016, at 03:16 PM, Fernando Fuentes wrote: > > > > > > > > Nir, > > > > > > > > After some playing around with pvscan I was able to get all of the need > > > > it > > > > information. > > > > > > > > Please see: > > > > > > > > > > > > -- > > > > Fernando Fuentes > > > > ffuen...@txweather.org > > > > http://www.txweather.org > > &g
[ovirt-users] management interface
Team, Is it possible to move the ovirt management interface to a separate vlan and keep it from been on the same interface as my LAN? IE: assign a tag to ovirtmanagement and keep another interface as untag for my LAN to use with the VM's Thoughts ideas? TIA! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] reports
Fred, Thanks for your reply! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Jul 31, 2016, at 10:14 AM, Fred Rolland wrote: > oVirt 4.0 does not include Reports: > > http://lists.ovirt.org/pipermail/users/2016-June/040549.html > > On Sun, Jul 31, 2016 at 6:07 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> Team, >> >> Ovirt 4.0 has no reports capabilities? >> I dont see the reports modules available for install. >> >> Regards, >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >> ___ >> Users mailing list Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] reports
Team, Ovirt 4.0 has no reports capabilities? I dont see the reports modules available for install. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, I been busy and have not been able to replicate your request. I will as soon as I get a chance I will. Thanks again for the help. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Tue, Jul 19, 2016, at 08:54 AM, Fernando Fuentes wrote: > Nir, > > Thanks for all the help! > I am on it and will reply with the requested info asap. > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Tue, Jul 19, 2016, at 07:16 AM, Nir Soffer wrote: > > On Mon, Jul 18, 2016 at 11:16 PM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > > > Ops... forgot the link: > > > > > > http://pastebin.com/LereJgyw > > > > > > The requested infor is in the pastebin. > > > > So the issue is clear now, the template on NFS is using raw format, and > > on block > > stoage, qcow format: > > > > NFS: > > > > root@zeta ~]# cat > > /rhev/data-center/mnt/172.30.10.5\:_opt_libvirtd_images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f- > > ... > > FORMAT=RAW > > ... > > > > [root@alpha ~]# qemu-img info > > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > > image: > > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > > ... > > file format: raw > > ... > > > > iSCSI: > > > > [root@zeta ~]# qemu-img info > > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > > image: > > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > > ... > > file format: qcow2 > > ... > > > > [root@zeta ~]# dd > > if=/dev/0ef17024-0eae-4590-8eea-6ec8494fe223/metadata bs=512 skip=4 > > count=1 iflag=direct > > ... > > FORMAT=COW > > ... > > > > This format conversion is expected, as we don't support raw/sparse on > > block storage. > > > > It looks like the vm is started with the template disk as "raw" > > format, which is expected > > to fail when the format is actually "qcow2". The guest will see the > > qcow headers instead > > of the actual data. > > > > The next step to debug this is: > > > > 1. Copy a disk using this template to the block storage domain > > 2. Create a new vm using this disk > > 3. Start the vm > > > > Does it start? if not, attach engine and vdsm logs from this timefame. > > > > If this works, you can try: > > > > 1. Move vm disk from NFS to block storage > > 2. Start the vm > > > > Again, it it does not work, add engine and vdsm logs. > > > > Nir > > > > > > > > Regards, > > > > > > > > > -- > > > Fernando Fuentes > > > ffuen...@txweather.org > > > http://www.txweather.org > > > > > > > > > > > > On Mon, Jul 18, 2016, at 03:16 PM, Fernando Fuentes wrote: > > > > > > Nir, > > > > > > After some playing around with pvscan I was able to get all of the need it > > > information. > > > > > > Please see: > > > > > > > > > -- > > > Fernando Fuentes > > > ffuen...@txweather.org > > > http://www.txweather.org > > > > > > > > > > > > On Mon, Jul 18, 2016, at 02:30 PM, Nir Soffer wrote: > > > > > > On Mon, Jul 18, 2016 at 6:48 PM, Fernando Fuentes <ffuen...@darktcp.net> > > > wrote: > > >> Nir, > > >> > > >> As requested: > > >> > > >> [root@gamma ~]# lsblk > > >> NAME MAJ:MIN RM > > >> SIZE RO TYPE MOUNTPOINT > > >> sda 8:00 > > >> 557G 0 disk > > >> ├─sda1 8:10 > > >> 500M 0 part /boot > > >> └─sda2 8:20 > > >> 556.5G 0 part > > >> ├─vg_gamma-lv_root (dm-0) 253:00 > > >> 50G 0 lvm / > > >> ├─vg_gamma-lv_swap (dm-1) 253:10 > > >>
Re: [ovirt-users] one export domain two DC
Fred, It actually worked with no issues. Thanks for the help! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jul 27, 2016, at 06:36 AM, Fred Rolland wrote: > Hi, > Did you perform an "Import Domain" on the second setup ? It > should work. > Thanks, > Fred > > On Mon, Jul 25, 2016 at 11:21 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> __ >> It did not work for me. >> When I put the export on maintenance mode/detach it than try to add >> to my second dc I get: >> >> Error while executing action New NFS Storage Domain: Error in >> creating a Storage Domain. The selected storage path is not empty >> (probably contains another Storage Domain). Either remove the >> existing Storage Domain from this path, or change the Storage path). >> >> I am not sure if I explain my self right... >> I have two clusters and two different ovirt DC. each ovirt manager >> is installed on a different host... One host has oVirt 3.6 and the >> other host has ovirt 4.0 >> >> I want to export my vms on my ovirt 3.6 and move those vm's to my >> ovirt 4.0. >> >> What are my options? >> >> >> Regards, >> >> >> -- >> Fernando Fuentes >> ffuen...@txweather.org >> http://www.txweather.org >> >> >> >> >> On Fri, Jul 22, 2016, at 09:10 AM, Fernando Fuentes wrote: >>> To All, >>> >>> Thank you for the help! >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes >>> ffuen...@txweather.org >>> http://www.txweather.org >>> >>> >>> >>> On Fri, Jul 22, 2016, at 07:12 AM, Yaniv Kaul wrote: >>>> >>>> >>>> On Wed, Jul 20, 2016 at 2:04 PM, Fernando Fuentes >>>> <ffuen...@darktcp.net> wrote: >>>>> Is it possible to export all of my vms on my oVirt 3.5 Domain and >>>>> than >>>>> attach my export domain on my oVirt 4.0 DC and import the vm's? >>>> >>>> Yes, you can do this + just import a storage domain (see [1] for >>>> details - since 3.5) >>>> Y. >>>> >>>> [1] >>>> http://www.ovirt.org/develop/release-management/features/storage/importstoragedomain/ >>>> >>>>> >>>>> Regards, >>>>> >>>>> -- >>>>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>>>> ___ >>>>> Users mailing list Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> _ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how to enable spice on ovirt 4.0
Michael, Thanks! I saw an email chain not too long ago with the exact question I had so I was able to get it going. Thanks again. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jul 25, 2016, at 03:51 PM, Michal Skrivanek wrote: > > > > On 25 Jul 2016, at 22:07, Sandro Bonazzola > <sbona...@redhat.com> wrote: >> >> Il 21/Lug/2016 05:38, "Fernando Fuentes" <ffuen...@darktcp.net> ha >> scritto: >> > >> > Any body? :) >> > >> Michal? Francesco? >> >> >> > -- >> > Fernando Fuentes >> > ffuen...@txweather.org >> > http://www.txweather.org >> > >> > On Wed, Jul 20, 2016, at 12:36 PM, Fernando Fuentes wrote: >> > > Team, >> > > >> > > How can I enable spice-xpi to be supported again on oVirt 4.0? > > It's deprecated in 4.0 and will go away completely in 4.1 > See more details in > https://bugzilla.redhat.com/show_bug.cgi?id=1316560 > > Thanks, > michal >> > > >> > > Regards, >> > > >> > > -- >> > > Fernando Fuentes >> > > ffuen...@txweather.org >> > > http://www.txweather.org >> > > ___ >> > > Users mailing list >> > > Users@ovirt.org >> > > http://lists.ovirt.org/mailman/listinfo/users >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] one export domain two DC
It did not work for me. When I put the export on maintenance mode/detach it than try to add to my second dc I get: Error while executing action New NFS Storage Domain: Error in creating a Storage Domain. The selected storage path is not empty (probably contains another Storage Domain). Either remove the existing Storage Domain from this path, or change the Storage path). I am not sure if I explain my self right... I have two clusters and two different ovirt DC. each ovirt manager is installed on a different host... One host has oVirt 3.6 and the other host has ovirt 4.0 I want to export my vms on my ovirt 3.6 and move those vm's to my ovirt 4.0. What are my options? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 22, 2016, at 09:10 AM, Fernando Fuentes wrote: > To All, > > Thank you for the help! > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Fri, Jul 22, 2016, at 07:12 AM, Yaniv Kaul wrote: >> >> >> On Wed, Jul 20, 2016 at 2:04 PM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote: >>> Is it possible to export all of my vms on my oVirt 3.5 Domain >>> and than >>> attach my export domain on my oVirt 4.0 DC and import the vm's? >> >> Yes, you can do this + just import a storage domain (see [1] for >> details - since 3.5) >> Y. >> >> [1] >> http://www.ovirt.org/develop/release-management/features/storage/importstoragedomain/ >> >>> >>> Regards, >>> >>> -- >>> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >>> ___ >>> Users mailing list Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] one export domain two DC
To All, Thank you for the help! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 22, 2016, at 07:12 AM, Yaniv Kaul wrote: > > > On Wed, Jul 20, 2016 at 2:04 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> Is it possible to export all of my vms on my oVirt 3.5 Domain >> and than >> attach my export domain on my oVirt 4.0 DC and import the vm's? > > Yes, you can do this + just import a storage domain (see [1] for > details - since 3.5) > Y. > > [1] > http://www.ovirt.org/develop/release-management/features/storage/importstoragedomain/ > >> >> Regards, >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >> ___ >> Users mailing list Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] one export domain two DC
Colin, Thanks for your reply. Can you give me some details on how you did it? You just put it on maintenance mode and detach it and the add it to the other domain? It wont complain about been part of another domain? Regards, On Wed, Jul 20, 2016 at 10:54 PM, Colin Coe <colin@gmail.com> wrote: > Not sure about 4.0, but We have RHEV 3.5 and RHEV 3.6 sharing the same > export domain. Caveat is it can only be attached to one DC at a time. > > CC > > On Thu, Jul 21, 2016 at 11:38 AM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: >> How about this one? :) >> >> -- >> Fernando Fuentes ffuen...@txweather.org http://www.txweather.org >> >> On Wed, Jul 20, 2016, at 06:04 AM, Fernando Fuentes wrote: >> > Is it possible to export all of my vms on my oVirt 3.5 Domain and >> > than >> > attach my export domain on my oVirt 4.0 DC and import the vm's? >> > >> > Regards, >> > >> > -- >> > Fernando Fuentes >> > ffuen...@txweather.org >> > http://www.txweather.org >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] one export domain two DC
How about this one? :) -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jul 20, 2016, at 06:04 AM, Fernando Fuentes wrote: > Is it possible to export all of my vms on my oVirt 3.5 Domain and than > attach my export domain on my oVirt 4.0 DC and import the vm's? > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how to enable
Any body? :) -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jul 20, 2016, at 12:36 PM, Fernando Fuentes wrote: > Team, > > How can I enable spice-xpi to be supported again on oVirt 4.0? > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] how to enable
Team, How can I enable spice-xpi to be supported again on oVirt 4.0? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] one export domain two DC
Is it possible to export all of my vms on my oVirt 3.5 Domain and than attach my export domain on my oVirt 4.0 DC and import the vm's? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, Thanks for all the help! I am on it and will reply with the requested info asap. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Tue, Jul 19, 2016, at 07:16 AM, Nir Soffer wrote: > On Mon, Jul 18, 2016 at 11:16 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Ops... forgot the link: > > > > http://pastebin.com/LereJgyw > > > > The requested infor is in the pastebin. > > So the issue is clear now, the template on NFS is using raw format, and > on block > stoage, qcow format: > > NFS: > > root@zeta ~]# cat > /rhev/data-center/mnt/172.30.10.5\:_opt_libvirtd_images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f- > ... > FORMAT=RAW > ... > > [root@alpha ~]# qemu-img info > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > image: > /opt/libvirtd/images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/3b7d9349-9eb1-42f8-9e04-7bbb97c02b98/25b6b0fe-d416-458f-b89f-363338ee0c0e > ... > file format: raw > ... > > iSCSI: > > [root@zeta ~]# qemu-img info > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > image: > /dev/0ef17024-0eae-4590-8eea-6ec8494fe223/25b6b0fe-d416-458f-b89f-363338ee0c0e > ... > file format: qcow2 > ... > > [root@zeta ~]# dd > if=/dev/0ef17024-0eae-4590-8eea-6ec8494fe223/metadata bs=512 skip=4 > count=1 iflag=direct > ... > FORMAT=COW > ... > > This format conversion is expected, as we don't support raw/sparse on > block storage. > > It looks like the vm is started with the template disk as "raw" > format, which is expected > to fail when the format is actually "qcow2". The guest will see the > qcow headers instead > of the actual data. > > The next step to debug this is: > > 1. Copy a disk using this template to the block storage domain > 2. Create a new vm using this disk > 3. Start the vm > > Does it start? if not, attach engine and vdsm logs from this timefame. > > If this works, you can try: > > 1. Move vm disk from NFS to block storage > 2. Start the vm > > Again, it it does not work, add engine and vdsm logs. > > Nir > > > > > Regards, > > > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > > > > > On Mon, Jul 18, 2016, at 03:16 PM, Fernando Fuentes wrote: > > > > Nir, > > > > After some playing around with pvscan I was able to get all of the need it > > information. > > > > Please see: > > > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > > > > > On Mon, Jul 18, 2016, at 02:30 PM, Nir Soffer wrote: > > > > On Mon, Jul 18, 2016 at 6:48 PM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > >> Nir, > >> > >> As requested: > >> > >> [root@gamma ~]# lsblk > >> NAME MAJ:MIN RM > >> SIZE RO TYPE MOUNTPOINT > >> sda 8:00 > >> 557G 0 disk > >> ├─sda1 8:10 > >> 500M 0 part /boot > >> └─sda2 8:20 > >> 556.5G 0 part > >> ├─vg_gamma-lv_root (dm-0) 253:00 > >> 50G 0 lvm / > >> ├─vg_gamma-lv_swap (dm-1) 253:10 > >> 4G 0 lvm [SWAP] > >> └─vg_gamma-lv_home (dm-2) 253:20 > >> 502.4G 0 lvm /home > >> sr011:01 > >> 1024M 0 rom > >> sdb 8:16 0 > >> 2T 0 disk > >> └─36589cfc00881b9b93c2623780840 (dm-4)253:40 > >> 2T 0 mpath > >> sdc 8:32 0 > >> 2T 0 disk > >> └─36589cfc0050564002c7e51978316 (dm-3)253:30 > >> 2T 0 mpath > >> ├─3ccb7b67--8067--4315--9656--d68ba10975ba-metadata (dm-5) 253:50 > >> 512M 0 lvm > >> ├─3ccb7b67--8067--4315--9656--d68ba10975ba-outbox (dm-6)253:60 > >
Re: [ovirt-users] disk not bootable
Ops... forgot the link: http://pastebin.com/LereJgyw The requested infor is in the pastebin. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jul 18, 2016, at 03:16 PM, Fernando Fuentes wrote: > Nir, > > After some playing around with pvscan I was able to get all of the > need it information. > > Please see: > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Mon, Jul 18, 2016, at 02:30 PM, Nir Soffer wrote: >> On Mon, Jul 18, 2016 at 6:48 PM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote: >> > Nir, >> > >> > As requested: >> > >> > [root@gamma ~]# lsblk >> > NAME >> > MAJ:MIN RM >> > SIZE RO TYPE MOUNTPOINT >> > sda >> > 8:00 >> > 557G 0 disk >> > ├─sda1 >> > 8:10 >> > 500M 0 part /boot >> > └─sda2 >> > 8:20 >> > 556.5G 0 part >> > ├─vg_gamma-lv_root (dm-0) >> > 253:00 >> > 50G 0 lvm / >> > ├─vg_gamma-lv_swap (dm-1) >> > 253:10 >> > 4G 0 lvm [SWAP] >> > └─vg_gamma-lv_home (dm-2) >> > 253:20 >> > 502.4G 0 lvm /home >> > sr0 >> > 11:01 >> > 1024M 0 rom >> > sdb >> > 8:16 0 >> > 2T 0 disk >> > └─36589cfc00881b9b93c2623780840 (dm-4) >> > 253:40 >> > 2T 0 mpath >> > sdc >> > 8:32 0 >> > 2T 0 disk >> > └─36589cfc0050564002c7e51978316 (dm-3) >> > 253:30 >> > 2T 0 mpath >> > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-metadata (dm-5) >> > 253:50 >> > 512M 0 lvm >> > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-outbox (dm-6) >> > 253:60 >> > 128M 0 lvm >> > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-leases (dm-7) >> > 253:70 >> > 2G 0 lvm >> > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-ids (dm-8) >> > 253:80 >> > 128M 0 lvm >> > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-inbox (dm-9) >> > 253:90 >> > 128M 0 lvm >> > └─3ccb7b67--8067--4315--9656--d68ba10975ba-master (dm-10) >> > 253:10 0 >> > 1G 0 lvm >> > sdd >> > 8:48 0 >> > 4T 0 disk >> > └─36589cfc0059ccab70662b71c47ef (dm-11) >> > 253:11 0 >> > 4T 0 mpath >> > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-metadata (dm-12) >> > 253:12 0 >> > 512M 0 lvm >> > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-ids (dm-13) >> > 253:13 0 >> > 128M 0 lvm >> > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-leases (dm-14) >> > 253:14 0 >> > 2G 0 lvm >> > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-outbox (dm-15) >> > 253:15 0 >> > 128M 0 lvm >> > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-inbox (dm-16) >> > 253:16 0 >> > 128M 0 lvm >> > └─4861322b--352f--41c6--890a--5cbf1c2c1f01-master (dm-17) >> > 253:17 0 >> > 1G 0 lvm >> >> So you have 2 storage domains: >> >> - 3ccb7b67-8067-4315-9656-d68ba10975ba >> - 4861322b-352f-41c6-890a-5cbf1c2c1f01 >> >> But most likely both of them are not active now. >> >> Can you share the output of: >> >> iscsiadm -m session >> >> On a system connected to iscsi storage you will see something like: >> >> # iscsiadm -m session >> tcp: [5] 10.35.0.99:3260,1 iqn.2003-01.org.dumbo.target1 (non-flash) >> >> The special lvs (ids, leases, ...) should be active, and you should >> see also >> regular disks lvs (used for snapshot for vm disks). >> >> Here is an example from machine connected to active iscsi domain: >> >> # lvs >> LV VG >> Attr LSize >> 27c4c795-bca4-4d7b-9b40-cda9098790f5 5f35b5c0-17d7-4475-9125- >> e97f1cdb06f9 -wi--- 1.00g >> 35be1f52-5b28-4c90-957a-710dbbb8f13f 5f35b5c0-17d7-4475-9125- >> e97f1cdb06f9 -wi--- 8.00g >> 36d9b41b-4b01-4fc2-8e93-ccf79af0f766 5f35b5c0-17d7-4475-9125- >> e97f1cdb06f9 -wi--- 128.00m >> 4fda3b44-27a5-4ce4-b8c3-66744aa9937b 5f35b5c0-17d7-4475-9125- >> e97f1cdb06f9 -wi--- 2.12g >> c2e78f72-d499-44f0-91f5-9930a599dc87 5f35b5c0-17d7-4475-912
Re: [ovirt-users] disk not bootable
Nir, After some playing around with pvscan I was able to get all of the need it information. Please see: -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jul 18, 2016, at 02:30 PM, Nir Soffer wrote: > On Mon, Jul 18, 2016 at 6:48 PM, Fernando Fuentes > <ffuen...@darktcp.net> wrote: > > Nir, > > > > As requested: > > > > [root@gamma ~]# lsblk > > NAME > > MAJ:MIN RM > > SIZE RO TYPE MOUNTPOINT > > sda > > 8:00 > > 557G 0 disk > > ├─sda1 > > 8:10 > > 500M 0 part /boot > > └─sda2 > > 8:20 > > 556.5G 0 part > > ├─vg_gamma-lv_root (dm-0) > > 253:00 > > 50G 0 lvm / > > ├─vg_gamma-lv_swap (dm-1) > > 253:10 > > 4G 0 lvm [SWAP] > > └─vg_gamma-lv_home (dm-2) > > 253:20 > > 502.4G 0 lvm /home > > sr0 > > 11:01 > > 1024M 0 rom > > sdb > > 8:16 0 > > 2T 0 disk > > └─36589cfc00881b9b93c2623780840 (dm-4) > > 253:40 > > 2T 0 mpath > > sdc > > 8:32 0 > > 2T 0 disk > > └─36589cfc0050564002c7e51978316 (dm-3) > > 253:30 > > 2T 0 mpath > > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-metadata (dm-5) > > 253:50 > > 512M 0 lvm > > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-outbox (dm-6) > > 253:60 > > 128M 0 lvm > > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-leases (dm-7) > > 253:70 > > 2G 0 lvm > > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-ids (dm-8) > > 253:80 > > 128M 0 lvm > > ├─3ccb7b67--8067--4315--9656--d68ba10975ba-inbox (dm-9) > > 253:90 > > 128M 0 lvm > > └─3ccb7b67--8067--4315--9656--d68ba10975ba-master (dm-10) > > 253:10 0 > > 1G 0 lvm > > sdd > > 8:48 0 > > 4T 0 disk > > └─36589cfc0059ccab70662b71c47ef (dm-11) > > 253:11 0 > > 4T 0 mpath > > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-metadata (dm-12) > > 253:12 0 > > 512M 0 lvm > > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-ids (dm-13) > > 253:13 0 > > 128M 0 lvm > > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-leases (dm-14) > > 253:14 0 > > 2G 0 lvm > > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-outbox (dm-15) > > 253:15 0 > > 128M 0 lvm > > ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-inbox (dm-16) > > 253:16 0 > > 128M 0 lvm > > └─4861322b--352f--41c6--890a--5cbf1c2c1f01-master (dm-17) > > 253:17 0 > > 1G 0 lvm > > So you have 2 storage domains: > > - 3ccb7b67-8067-4315-9656-d68ba10975ba > - 4861322b-352f-41c6-890a-5cbf1c2c1f01 > > But most likely both of them are not active now. > > Can you share the output of: > > iscsiadm -m session > > On a system connected to iscsi storage you will see something like: > > # iscsiadm -m session > tcp: [5] 10.35.0.99:3260,1 iqn.2003-01.org.dumbo.target1 (non-flash) > > The special lvs (ids, leases, ...) should be active, and you should > see also > regular disks lvs (used for snapshot for vm disks). > > Here is an example from machine connected to active iscsi domain: > > # lvs > LV VG > Attr LSize > 27c4c795-bca4-4d7b-9b40-cda9098790f5 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 1.00g > 35be1f52-5b28-4c90-957a-710dbbb8f13f 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 8.00g > 36d9b41b-4b01-4fc2-8e93-ccf79af0f766 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 128.00m > 4fda3b44-27a5-4ce4-b8c3-66744aa9937b 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 2.12g > c2e78f72-d499-44f0-91f5-9930a599dc87 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 128.00m > d49919b4-30fc-440f-9b21-3367ddfdf396 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 4.00g > f3b10280-43ed-4772-b122-18c92e098171 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 1.00g > f409cc48-8248-4239-a4ea-66b0b1084416 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi--- 1.00g > ids 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi-ao 128.00m > inbox5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi-a- 128.00m > leases 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi-a- 2.00g > master 5f35b5c0-17d7-4475-9125- > e97f1cdb06f9 -wi-a- 1.00g > metadata
Re: [ovirt-users] disk not bootable
Nir, As requested: [root@gamma ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:00 557G 0 disk ├─sda1 8:10 500M 0 part /boot └─sda2 8:20 556.5G 0 part ├─vg_gamma-lv_root (dm-0) 253:00 50G 0 lvm / ├─vg_gamma-lv_swap (dm-1) 253:10 4G 0 lvm [SWAP] └─vg_gamma-lv_home (dm-2) 253:20 502.4G 0 lvm /home sr011:01 1024M 0 rom sdb 8:16 0 2T 0 disk └─36589cfc00881b9b93c2623780840 (dm-4)253:40 2T 0 mpath sdc 8:32 0 2T 0 disk └─36589cfc0050564002c7e51978316 (dm-3)253:30 2T 0 mpath ├─3ccb7b67--8067--4315--9656--d68ba10975ba-metadata (dm-5) 253:50 512M 0 lvm ├─3ccb7b67--8067--4315--9656--d68ba10975ba-outbox (dm-6)253:60 128M 0 lvm ├─3ccb7b67--8067--4315--9656--d68ba10975ba-leases (dm-7)253:70 2G 0 lvm ├─3ccb7b67--8067--4315--9656--d68ba10975ba-ids (dm-8) 253:80 128M 0 lvm ├─3ccb7b67--8067--4315--9656--d68ba10975ba-inbox (dm-9) 253:90 128M 0 lvm └─3ccb7b67--8067--4315--9656--d68ba10975ba-master (dm-10) 253:10 0 1G 0 lvm sdd 8:48 0 4T 0 disk └─36589cfc0059ccab70662b71c47ef (dm-11) 253:11 0 4T 0 mpath ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-metadata (dm-12) 253:12 0 512M 0 lvm ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-ids (dm-13) 253:13 0 128M 0 lvm ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-leases (dm-14) 253:14 0 2G 0 lvm ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-outbox (dm-15) 253:15 0 128M 0 lvm ├─4861322b--352f--41c6--890a--5cbf1c2c1f01-inbox (dm-16)253:16 0 128M 0 lvm └─4861322b--352f--41c6--890a--5cbf1c2c1f01-master (dm-17) 253:17 0 1G 0 lvm [root@gamma ~]# Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jul 18, 2016, at 07:43 AM, Nir Soffer wrote: > Can you share output of lsblk on this host? > > On Mon, Jul 18, 2016 at 3:52 AM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Nir, > > > > That's odd. gamma is my iscsi host, its in up state and it has active > > VM's. > > What am I missing? > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Sun, Jul 17, 2016, at 07:24 PM, Nir Soffer wrote: > >> On Sun, Jul 17, 2016 at 1:24 AM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Nir, > >> > > >> > Ok I got the uuid but I am getting the same results as before. > >> > Nothing comes up. > >> > > >> > [root@gamma ~]# pvscan --cache > >> > [root@gamma ~]# lvs -o vg_name,lv_name,tags | grep > >> > 3b7d9349-9eb1-42f8-9e04-7bbb97c02b98 > >> > [root@gamma ~]# > >> > > >> > without the grep all I get is: > >> > > >> > [root@gamma ~]# lvs -o vg_name,lv_name,tags > >> > VG LV LV Tags > >> > vg_gamma lv_home > >> > vg_gamma lv_root > >> > vg_gamma lv_swap > >> > >> You are not connected to the iscsi storage domain. > >> > >> Please try this from a host in up state in engine. > >> > >> Nir > >> > >> > > >> > On the other hand an fdisk shows a bunch of disks and here is one > >> > example: > >> > > >> > Disk /dev/mapper/36589cfc0050564002c7e51978316: 2199.0 GB, > >> > 219902322 bytes > >> > 255 heads, 63 sectors/track, 267349 cylinders > >> > Units = cylinders of 16065 * 512 = 8225280 bytes > >> > Sector size (logical/physical): 512 bytes / 32768 bytes > >> > I/O size (minimum/optimal): 32768 bytes / 1048576 bytes > >> > Disk identifier: 0x > >> > > >> > > >> > Disk /dev/mapper/36589cfc00881b9b93c2623780840: 2199.0 GB, > >> > 219902322 bytes > >> > 255 heads, 63 sectors/track, 267349 cylinders > >> > Units = cylinders
Re: [ovirt-users] disk not bootable
Nir, That's odd. gamma is my iscsi host, its in up state and it has active VM's. What am I missing? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Jul 17, 2016, at 07:24 PM, Nir Soffer wrote: > On Sun, Jul 17, 2016 at 1:24 AM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Nir, > > > > Ok I got the uuid but I am getting the same results as before. > > Nothing comes up. > > > > [root@gamma ~]# pvscan --cache > > [root@gamma ~]# lvs -o vg_name,lv_name,tags | grep > > 3b7d9349-9eb1-42f8-9e04-7bbb97c02b98 > > [root@gamma ~]# > > > > without the grep all I get is: > > > > [root@gamma ~]# lvs -o vg_name,lv_name,tags > > VG LV LV Tags > > vg_gamma lv_home > > vg_gamma lv_root > > vg_gamma lv_swap > > You are not connected to the iscsi storage domain. > > Please try this from a host in up state in engine. > > Nir > > > > > On the other hand an fdisk shows a bunch of disks and here is one > > example: > > > > Disk /dev/mapper/36589cfc0050564002c7e51978316: 2199.0 GB, > > 219902322 bytes > > 255 heads, 63 sectors/track, 267349 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > Sector size (logical/physical): 512 bytes / 32768 bytes > > I/O size (minimum/optimal): 32768 bytes / 1048576 bytes > > Disk identifier: 0x > > > > > > Disk /dev/mapper/36589cfc00881b9b93c2623780840: 2199.0 GB, > > 219902322 bytes > > 255 heads, 63 sectors/track, 267349 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > Sector size (logical/physical): 512 bytes / 32768 bytes > > I/O size (minimum/optimal): 32768 bytes / 1048576 bytes > > Disk identifier: 0x > > > > > > Disk /dev/mapper/3ccb7b67--8067--4315--9656--d68ba10975ba-metadata: 536 > > MB, 536870912 bytes > > 255 heads, 63 sectors/track, 65 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > Sector size (logical/physical): 512 bytes / 32768 bytes > > I/O size (minimum/optimal): 32768 bytes / 1048576 bytes > > Disk identifier: 0x > > > > Disk /dev/mapper/4861322b--352f--41c6--890a--5cbf1c2c1f01-master: 1073 > > MB, 1073741824 bytes > > 255 heads, 63 sectors/track, 130 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > Sector size (logical/physical): 512 bytes / 32768 bytes > > I/O size (minimum/optimal): 32768 bytes / 1048576 bytes > > Disk identifier: 0x > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Sat, Jul 16, 2016, at 04:25 PM, Fernando Fuentes wrote: > >> Nir, > >> > >> Ok ill look for it here in a few. > >> Thanks for your reply and help! > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> > >> On Sat, Jul 16, 2016, at 04:16 PM, Nir Soffer wrote: > >> > On Fri, Jul 15, 2016 at 3:50 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> > wrote: > >> > > Nir, > >> > > > >> > > I try to follow your steps but I cant seem to find the ID of the > >> > > template. > >> > > >> > The image-uuid of the template is displayed in the Disks tab in engine. > >> > > >> > To find the volume-uuid on block storage, you can do: > >> > > >> > pvscan --cache > >> > lvs -o vg_name,lv_name,tags | grep image-uuid > >> > > >> > > > >> > > Regards, > >> > > > >> > > -- > >> > > Fernando Fuentes > >> > > ffuen...@txweather.org > >> > > http://www.txweather.org > >> > > > >> > > On Sun, Jul 10, 2016, at 02:15 PM, Nir Soffer wrote: > >> > >> On Thu, Jul 7, 2016 at 7:46 PM, Melissa Mesler <meli...@justmelly.com> > >> > >> wrote: > >> > >> > All, I did a test for Fernando in our ovirt environment. I created > >> > >> > a vm > >> > >> > called win7melly in the nfs domain. I then migrated it to the iscsi > >> > >> > domain. It booted without any issue. So it has to be something with > >> > >> > the > >> > >> > templates. I have attached the vdsm log for the host the vm resides > >> > >> > on. > >> > >&
Re: [ovirt-users] disk not bootable
Nir, Ok I got the uuid but I am getting the same results as before. Nothing comes up. [root@gamma ~]# pvscan --cache [root@gamma ~]# lvs -o vg_name,lv_name,tags | grep 3b7d9349-9eb1-42f8-9e04-7bbb97c02b98 [root@gamma ~]# without the grep all I get is: [root@gamma ~]# lvs -o vg_name,lv_name,tags VG LV LV Tags vg_gamma lv_home vg_gamma lv_root vg_gamma lv_swap On the other hand an fdisk shows a bunch of disks and here is one example: Disk /dev/mapper/36589cfc0050564002c7e51978316: 2199.0 GB, 219902322 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 32768 bytes I/O size (minimum/optimal): 32768 bytes / 1048576 bytes Disk identifier: 0x Disk /dev/mapper/36589cfc00881b9b93c2623780840: 2199.0 GB, 219902322 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 32768 bytes I/O size (minimum/optimal): 32768 bytes / 1048576 bytes Disk identifier: 0x Disk /dev/mapper/3ccb7b67--8067--4315--9656--d68ba10975ba-metadata: 536 MB, 536870912 bytes 255 heads, 63 sectors/track, 65 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 32768 bytes I/O size (minimum/optimal): 32768 bytes / 1048576 bytes Disk identifier: 0x Disk /dev/mapper/4861322b--352f--41c6--890a--5cbf1c2c1f01-master: 1073 MB, 1073741824 bytes 255 heads, 63 sectors/track, 130 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 32768 bytes I/O size (minimum/optimal): 32768 bytes / 1048576 bytes Disk identifier: 0x Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sat, Jul 16, 2016, at 04:25 PM, Fernando Fuentes wrote: > Nir, > > Ok ill look for it here in a few. > Thanks for your reply and help! > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > On Sat, Jul 16, 2016, at 04:16 PM, Nir Soffer wrote: > > On Fri, Jul 15, 2016 at 3:50 PM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > > > Nir, > > > > > > I try to follow your steps but I cant seem to find the ID of the > > > template. > > > > The image-uuid of the template is displayed in the Disks tab in engine. > > > > To find the volume-uuid on block storage, you can do: > > > > pvscan --cache > > lvs -o vg_name,lv_name,tags | grep image-uuid > > > > > > > > Regards, > > > > > > -- > > > Fernando Fuentes > > > ffuen...@txweather.org > > > http://www.txweather.org > > > > > > On Sun, Jul 10, 2016, at 02:15 PM, Nir Soffer wrote: > > >> On Thu, Jul 7, 2016 at 7:46 PM, Melissa Mesler <meli...@justmelly.com> > > >> wrote: > > >> > All, I did a test for Fernando in our ovirt environment. I created a vm > > >> > called win7melly in the nfs domain. I then migrated it to the iscsi > > >> > domain. It booted without any issue. So it has to be something with the > > >> > templates. I have attached the vdsm log for the host the vm resides on. > > >> > > >> The log show a working vm, so it does not help much. > > >> > > >> I think that the template you copied from the nfs domain to the block > > >> domain is > > >> corrupted, or the volume metadata are incorrect. > > >> > > >> If I understand this correctly, this started when Fernando could not copy > > >> the vm > > >> disk to the block storage, and I guess the issue was that the template > > >> was missing > > >> on that storage domain. I assume that he copied the template to the > > >> block storage > > >> domain by opening the templates tab, selecting the template, and choosing > > >> copy > > >> from the menu. > > >> > > >> Lets compare the template on both nfs and block storage domain. > > >> > > >> 1. Find the template on the nfs storage domain, using the image uuid in > > >> engine. > > >> > > >> It should be at > > >> > > >> > > >> /rhev/data-center/mnt/server:_path/domain-uuid/images/image-uuid/volume-uuid > > >> > > >> 2. Please share the output of: > > >> > > >> cat /path/to/volume.meta > > >> qemu-img info /path/to/volume > > >> qemu-img check /path/to/volume > > >> > > >> 4. Find the templ
Re: [ovirt-users] disk not bootable
Nir, I try to follow your steps but I cant seem to find the ID of the template. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Jul 10, 2016, at 02:15 PM, Nir Soffer wrote: > On Thu, Jul 7, 2016 at 7:46 PM, Melissa Mesler <meli...@justmelly.com> > wrote: > > All, I did a test for Fernando in our ovirt environment. I created a vm > > called win7melly in the nfs domain. I then migrated it to the iscsi > > domain. It booted without any issue. So it has to be something with the > > templates. I have attached the vdsm log for the host the vm resides on. > > The log show a working vm, so it does not help much. > > I think that the template you copied from the nfs domain to the block > domain is > corrupted, or the volume metadata are incorrect. > > If I understand this correctly, this started when Fernando could not copy > the vm > disk to the block storage, and I guess the issue was that the template > was missing > on that storage domain. I assume that he copied the template to the > block storage > domain by opening the templates tab, selecting the template, and choosing > copy > from the menu. > > Lets compare the template on both nfs and block storage domain. > > 1. Find the template on the nfs storage domain, using the image uuid in > engine. > > It should be at > > > /rhev/data-center/mnt/server:_path/domain-uuid/images/image-uuid/volume-uuid > > 2. Please share the output of: > > cat /path/to/volume.meta > qemu-img info /path/to/volume > qemu-img check /path/to/volume > > 4. Find the template on the block storage domain > > You should have an lv using the same volume uuid and the image-uuid > should be in the lv tag. > > Find it using: > > lvs -o vg_name,lv_name,tags | grep volume-uuid > > 5. Activate the lv > > lvchange -ay vg_name/lv_name > > 6. Share the output of > > qemu-img info /dev/vg_name/lv_name > qemu-img check /dev/vg_name/lv_name > > 7. Deactivate the lv > > lvchange -an vg_name/lv_name > > 8. Find the lv metadata > > The metadata is stored in /dev/vg_name/metadata. To find the correct > block, > find the tag named MD_N in the lv tags you found in step 4 > > The block we need is located at offset N from start of volume. > > 9. Share the output of: > > dd if=/dev/vg_name/metadata bs=512 skip=N count=1 iflag=direct > > The output of this command should show the image-uuid. > > Nir > > > > > - MeLLy > > > > On Mon, Jul 4, 2016, at 11:52 PM, Fernando Fuentes wrote: > >> Nir, > >> > >> That's exactly how I did it Nir. > >> I will test tomorrow with a new Windows VM and report back. > >> > >> Regards, > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> > >> On Mon, Jul 4, 2016, at 10:48 AM, Nir Soffer wrote: > >> > On Mon, Jul 4, 2016 at 6:43 PM, Francesco Romani <from...@redhat.com> > >> > wrote: > >> > > - Original Message - > >> > >> From: "Nir Soffer" <nsof...@redhat.com> > >> > >> To: "Fernando Fuentes" <ffuen...@darktcp.net> > >> > >> Cc: "Francesco Romani" <from...@redhat.com>, "users" <users@ovirt.org> > >> > >> Sent: Saturday, July 2, 2016 11:18:01 AM > >> > >> Subject: Re: [ovirt-users] disk not bootable > >> > >> > >> > >> On Sat, Jul 2, 2016 at 1:33 AM, Fernando Fuentes > >> > >> <ffuen...@darktcp.net> > >> > >> wrote: > >> > >> > Nir, > >> > >> > > >> > >> > Ok I ran another test and this one I moved from NFS domain to iSCSI > >> > >> > and > >> > >> > stop working than I moved it back and still unable to run... > >> > >> > Windows VM > >> > >> > is saying "no available boot disk" > >> > >> > VM: Win7-Test > >> > >> > Host: Zeta > >> > >> > Info as requested: http://pastebin.com/1fSi3auz > >> > >> > >> > >> We need a working xml to compare to. > >> > > > >> > > [snip expected changes] > >> > > > >> > > > >> > >> oVirt > >> > >> oVirt Node > >> > >> 6-5.el6.centos.11.2 > >> > >
Re: [ovirt-users] disk not bootable
Nir, I am on it and will reply with the requested info asap. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sun, Jul 10, 2016, at 02:15 PM, Nir Soffer wrote: > On Thu, Jul 7, 2016 at 7:46 PM, Melissa Mesler <meli...@justmelly.com> > wrote: > > All, I did a test for Fernando in our ovirt environment. I created a vm > > called win7melly in the nfs domain. I then migrated it to the iscsi > > domain. It booted without any issue. So it has to be something with the > > templates. I have attached the vdsm log for the host the vm resides on. > > The log show a working vm, so it does not help much. > > I think that the template you copied from the nfs domain to the block > domain is > corrupted, or the volume metadata are incorrect. > > If I understand this correctly, this started when Fernando could not copy > the vm > disk to the block storage, and I guess the issue was that the template > was missing > on that storage domain. I assume that he copied the template to the > block storage > domain by opening the templates tab, selecting the template, and choosing > copy > from the menu. > > Lets compare the template on both nfs and block storage domain. > > 1. Find the template on the nfs storage domain, using the image uuid in > engine. > > It should be at > > > /rhev/data-center/mnt/server:_path/domain-uuid/images/image-uuid/volume-uuid > > 2. Please share the output of: > > cat /path/to/volume.meta > qemu-img info /path/to/volume > qemu-img check /path/to/volume > > 4. Find the template on the block storage domain > > You should have an lv using the same volume uuid and the image-uuid > should be in the lv tag. > > Find it using: > > lvs -o vg_name,lv_name,tags | grep volume-uuid > > 5. Activate the lv > > lvchange -ay vg_name/lv_name > > 6. Share the output of > > qemu-img info /dev/vg_name/lv_name > qemu-img check /dev/vg_name/lv_name > > 7. Deactivate the lv > > lvchange -an vg_name/lv_name > > 8. Find the lv metadata > > The metadata is stored in /dev/vg_name/metadata. To find the correct > block, > find the tag named MD_N in the lv tags you found in step 4 > > The block we need is located at offset N from start of volume. > > 9. Share the output of: > > dd if=/dev/vg_name/metadata bs=512 skip=N count=1 iflag=direct > > The output of this command should show the image-uuid. > > Nir > > > > > - MeLLy > > > > On Mon, Jul 4, 2016, at 11:52 PM, Fernando Fuentes wrote: > >> Nir, > >> > >> That's exactly how I did it Nir. > >> I will test tomorrow with a new Windows VM and report back. > >> > >> Regards, > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> > >> On Mon, Jul 4, 2016, at 10:48 AM, Nir Soffer wrote: > >> > On Mon, Jul 4, 2016 at 6:43 PM, Francesco Romani <from...@redhat.com> > >> > wrote: > >> > > - Original Message - > >> > >> From: "Nir Soffer" <nsof...@redhat.com> > >> > >> To: "Fernando Fuentes" <ffuen...@darktcp.net> > >> > >> Cc: "Francesco Romani" <from...@redhat.com>, "users" <users@ovirt.org> > >> > >> Sent: Saturday, July 2, 2016 11:18:01 AM > >> > >> Subject: Re: [ovirt-users] disk not bootable > >> > >> > >> > >> On Sat, Jul 2, 2016 at 1:33 AM, Fernando Fuentes > >> > >> <ffuen...@darktcp.net> > >> > >> wrote: > >> > >> > Nir, > >> > >> > > >> > >> > Ok I ran another test and this one I moved from NFS domain to iSCSI > >> > >> > and > >> > >> > stop working than I moved it back and still unable to run... > >> > >> > Windows VM > >> > >> > is saying "no available boot disk" > >> > >> > VM: Win7-Test > >> > >> > Host: Zeta > >> > >> > Info as requested: http://pastebin.com/1fSi3auz > >> > >> > >> > >> We need a working xml to compare to. > >> > > > >> > > [snip expected changes] > >> > > > >> > > > >> > >> oVirt > >> > >> oVirt Node > >> > >> 6-5.el6.centos.11.2 > >> > >> - C938F077-55E
Re: [ovirt-users] disk not bootable
Team, Any more ideas? :( -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 8, 2016, at 09:36 AM, Melissa Mesler wrote: > Michal, given what you said, then it has to be template related. We were > able to create a new vm from scratch and move from the nfs domain to the > iscsi domain. So where do we go from here? > > On Fri, Jul 8, 2016, at 04:24 AM, Michal Skrivanek wrote: > > > > > On 04 Jul 2016, at 17:43, Francesco Romani <from...@redhat.com> wrote: > > > > > > - Original Message - > > >> From: "Nir Soffer" <nsof...@redhat.com> > > >> To: "Fernando Fuentes" <ffuen...@darktcp.net> > > >> Cc: "Francesco Romani" <from...@redhat.com>, "users" <users@ovirt.org> > > >> Sent: Saturday, July 2, 2016 11:18:01 AM > > >> Subject: Re: [ovirt-users] disk not bootable > > >> > > >> On Sat, Jul 2, 2016 at 1:33 AM, Fernando Fuentes <ffuen...@darktcp.net> > > >> wrote: > > >>> Nir, > > >>> > > >>> Ok I ran another test and this one I moved from NFS domain to iSCSI and > > >>> stop working than I moved it back and still unable to run... Windows VM > > >>> is saying "no available boot disk" > > >>> VM: Win7-Test > > >>> Host: Zeta > > >>> Info as requested: http://pastebin.com/1fSi3auz > > >> > > >> We need a working xml to compare to. > > > > > > [snip expected changes] > > > > > > > > >> oVirt > > >> oVirt Node > > >> 6-5.el6.centos.11.2 > > >> - C938F077-55E2-3E50-A694-9FCB7661FD89 > > >> + 735C7A01-1F16-3CF0-AF8C-A99823E95AC0 > > >> > > >> Not expected - maybe this is confusing windows? > > > > Nope, only specific licensing software seem to be checking this > > > > >> > > >> Francesco, why vm serial has changed after moving disks from one storage > > >> domain > > >> to another? > > > > > > We put in serial either > > > 1. the UUID Engine send to us > > > 2. the host UUID as returned by our getHostUUID utility function > > > > > > the latter is unlikely to change, even after this disk move. > > > > depends on which host the VM is started. It’s the host-derived ID so it’s > > often different every time you run a VM. > > So I suppose here it just means the VM was launched on a different host. > > It shouldn’t be significant to the boot issue. > > > > > > > > So the first suspect in line is Engine > > > > > > Arik, do you know if Engine is indeed supposed to change the UUID in this > > > flow? > > > That seems very surprising. > > > > > > Thanks and bests, > > > > > > -- > > > Francesco Romani > > > RedHat Engineering Virtualization R & D > > > Phone: 8261328 > > > IRC: fromani > > > ___ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, That's exactly how I did it Nir. I will test tomorrow with a new Windows VM and report back. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jul 4, 2016, at 10:48 AM, Nir Soffer wrote: > On Mon, Jul 4, 2016 at 6:43 PM, Francesco Romani <from...@redhat.com> > wrote: > > - Original Message - > >> From: "Nir Soffer" <nsof...@redhat.com> > >> To: "Fernando Fuentes" <ffuen...@darktcp.net> > >> Cc: "Francesco Romani" <from...@redhat.com>, "users" <users@ovirt.org> > >> Sent: Saturday, July 2, 2016 11:18:01 AM > >> Subject: Re: [ovirt-users] disk not bootable > >> > >> On Sat, Jul 2, 2016 at 1:33 AM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Nir, > >> > > >> > Ok I ran another test and this one I moved from NFS domain to iSCSI and > >> > stop working than I moved it back and still unable to run... Windows VM > >> > is saying "no available boot disk" > >> > VM: Win7-Test > >> > Host: Zeta > >> > Info as requested: http://pastebin.com/1fSi3auz > >> > >> We need a working xml to compare to. > > > > [snip expected changes] > > > > > >> oVirt > >> oVirt Node > >> 6-5.el6.centos.11.2 > >> - C938F077-55E2-3E50-A694-9FCB7661FD89 > >> + 735C7A01-1F16-3CF0-AF8C-A99823E95AC0 > >> > >> Not expected - maybe this is confusing windows? > >> > >> Francesco, why vm serial has changed after moving disks from one storage > >> domain > >> to another? > > > > We put in serial either > > 1. the UUID Engine send to us > > 2. the host UUID as returned by our getHostUUID utility function > > > > the latter is unlikely to change, even after this disk move. > > Fernando, can you describe exactly how you moved the disk? > > I assume that you selected the vm in the virtual machines tab, then > selected > disks from the sub tab, then selected move, and selected the target > storage domain. > > Also, can you reproduce this with a new vm? (create vm with disk nfs, > stop vm, > move disk to iscsi, start vm). > > > So the first suspect in line is Engine > > > > Arik, do you know if Engine is indeed supposed to change the UUID in this > > flow? > > That seems very surprising. > > > > Thanks and bests, > > > > -- > > Francesco Romani > > RedHat Engineering Virtualization R & D > > Phone: 8261328 > > IRC: fromani ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, I will try and get you a working xml. Any updates on your question from the team? TIA! -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Sat, Jul 2, 2016, at 04:18 AM, Nir Soffer wrote: > On Sat, Jul 2, 2016 at 1:33 AM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Nir, > > > > Ok I ran another test and this one I moved from NFS domain to iSCSI and > > stop working than I moved it back and still unable to run... Windows VM > > is saying "no available boot disk" > > VM: Win7-Test > > Host: Zeta > > Info as requested: http://pastebin.com/1fSi3auz > > We need a working xml to compare to. > > > > > Now here is an example of one that I migrated from the NFS domain to the > > iscsi domain and stop working: > > VM: Win7-QA5 > > Host: Alpha > > Info as requested: http://pastebin.com/BXqLFqZt > > > > The same VM I moved it back to the NFS domain and boot it just fine: > > VM: Win7-QA5 > > Host: Zeta > > Info as requested: http://pastebin.com/7BA97CsC > > Diffing both xmls show: > > $ diff -u win-qa5-iscsi.txt win-qa5-nfs.txt > --- win-qa5-iscsi.txt 2016-07-02 12:10:17.094202558 +0300 > +++ win-qa5-nfs.txt 2016-07-02 12:11:06.729375231 +0300 > @@ -60,13 +60,13 @@ > > > > - > + > > Expected, one vm is using block based disk and the other file based disk > > type="pci"/> > - dev="/rhev/data-center/mnt/blockSD/4861322b-352f-41c6-890a-5cbf1c2c1f01/images/25ebd3ac-fe5a-4cbb-9f71-c6b4325231d8/763a9a47-6b29-420a-83c9-c8a887bd15df"/> > + file="/rhev/data-center/mnt/172.30.10.5:_opt_libvirtd_images/ecfaf7ac-5459-4c83-bd97-2bb448e38526/images/25ebd3ac-fe5a-4cbb-9f71-c6b4325231d8/763a9a47-6b29-420a-83c9-c8a887bd15df"/> > > Expected, file and block disks are mounted on different paths > > > 25ebd3ac-fe5a-4cbb-9f71-c6b4325231d8 > > - type="qcow2"/> > + type="qcow2"/> > > Expected, we use different io for file and block > > > > > @@ -78,7 +78,7 @@ > oVirt > oVirt Node > 6-5.el6.centos.11.2 > - C938F077-55E2-3E50-A694-9FCB7661FD89 > + 735C7A01-1F16-3CF0-AF8C-A99823E95AC0 > > Not expected - maybe this is confusing windows? > > Francesco, why vm serial has changed after moving disks from one storage > domain > to another? > > 46e6d52c-2567-4f23-9a07-66f64990663a > > > > > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Fri, Jul 1, 2016, at 03:22 PM, Nir Soffer wrote: > >> Fernando, > >> > >> These logs do not contain the libvirt xml. > >> > >> I want to see the part that start like this: > >> > >> Thread-17656::INFO::2016-07-01 23:17:33,845::vm::2032::virt.vm::(_run) > >> vmId=`f66da2b0-0f71-490b-a57e-eceb9be9cade`:: >> encoding="utf-8"?> > >> http://ovirt.org/vm/tune/1.0;> > >> test-iscsi > >> f66da2b0-0f71-490b-a57e-eceb9be9cade > >> ... > >> > >> The most important part is the devices sections showing the disks: > >> > >> > >> >> type="drive" unit="0"/> > >> >> dev="/rhev/data-center/f9374c0e-ae24-4bc1-a596-f61d5f05bc5f/5f35b5c0-17d7-4475-9125-e97f1cdb06f9/images/8f61b697-b3e4-4f63-8951-bdf9b6b39192/f409cc48-8248-4239-a4ea-66b0b1084416"/> > >> > >> > >> 8f61b697-b3e4-4f63-8951-bdf9b6b39192 > >> > >> >> io="native" name="qemu" type="qcow2"/> > >> > >> > >> Please try to find the logs (probably already rotated to vdsm.log.N.xz) > >> containing the xml for this vm when running on nfs and iscsi. > >> > >> Nir > >> > >> On Fri, Jul 1, 2016 at 10:31 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Nir. > >> > > >> > Thank you for your reply. > >> > > >> > Attached is the vdsm log of the hosts that power on the vm in this > >> > example. > >> > > >> > VM name is Win7-QA5 > >> > vdsm_alpha.log was the host that started the VM when it got transfer to > >> > the iscsi domain. > >> > vdsm_zeta.log was the host that started the VM when it got transfer ba
Re: [ovirt-users] moving disk from nfs to iscsi
My issue was that my template was not in the destination data Domain. But I now have bigger issues. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 1, 2016, at 03:29 AM, Christophe TREFOIS wrote: > Cn you share the solution? > > Thanks, > > > > > On 30 Jun 2016, at 23:20, Fernando Fuentes <ffuen...@darktcp.net> wrote: > > > > Solved my own issue. :) > > > > Thanks guys! > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Thu, Jun 30, 2016, at 02:40 PM, Fernando Fuentes wrote: > >> Team, I am trying to move my vms from one storage domain (NFS Shared) to > >> another (iSCSI Shared)... > >> > >> Same DC. Two clusters. NFS is on cluser a and iscsi iss on cluster b. > >> > >> When I try to move the disk in "cluster a" I am not getting the option > >> to move it the iscsi data domain on cluster b. > >> > >> Ovirt 3.6.6 all centos 6.6 x86_64 hosts > >> > >> Any ideas why? > >> > >> Regards, > >> > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, Ok I ran another test and this one I moved from NFS domain to iSCSI and stop working than I moved it back and still unable to run... Windows VM is saying "no available boot disk" VM: Win7-Test Host: Zeta Info as requested: http://pastebin.com/1fSi3auz Now here is an example of one that I migrated from the NFS domain to the iscsi domain and stop working: VM: Win7-QA5 Host: Alpha Info as requested: http://pastebin.com/BXqLFqZt The same VM I moved it back to the NFS domain and boot it just fine: VM: Win7-QA5 Host: Zeta Info as requested: http://pastebin.com/7BA97CsC -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 1, 2016, at 03:22 PM, Nir Soffer wrote: > Fernando, > > These logs do not contain the libvirt xml. > > I want to see the part that start like this: > > Thread-17656::INFO::2016-07-01 23:17:33,845::vm::2032::virt.vm::(_run) > vmId=`f66da2b0-0f71-490b-a57e-eceb9be9cade`:: encoding="utf-8"?> > http://ovirt.org/vm/tune/1.0;> > test-iscsi > f66da2b0-0f71-490b-a57e-eceb9be9cade > ... > > The most important part is the devices sections showing the disks: > > > type="drive" unit="0"/> > dev="/rhev/data-center/f9374c0e-ae24-4bc1-a596-f61d5f05bc5f/5f35b5c0-17d7-4475-9125-e97f1cdb06f9/images/8f61b697-b3e4-4f63-8951-bdf9b6b39192/f409cc48-8248-4239-a4ea-66b0b1084416"/> > > 8f61b697-b3e4-4f63-8951-bdf9b6b39192 > > io="native" name="qemu" type="qcow2"/> > > > Please try to find the logs (probably already rotated to vdsm.log.N.xz) > containing the xml for this vm when running on nfs and iscsi. > > Nir > > On Fri, Jul 1, 2016 at 10:31 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Nir. > > > > Thank you for your reply. > > > > Attached is the vdsm log of the hosts that power on the vm in this > > example. > > > > VM name is Win7-QA5 > > vdsm_alpha.log was the host that started the VM when it got transfer to > > the iscsi domain. > > vdsm_zeta.log was the host that started the VM when it got transfer back > > to the nfs domain. > > > > I included everything for trouble shooting purposes. > > > > Also here is the engine log that talks about it as well: > > http://pastebin.com/3cHBNMcg > > > > Hope this helps. > > > > Regards, > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Fri, Jul 1, 2016, at 01:58 PM, Nir Soffer wrote: > >> On Fri, Jul 1, 2016 at 7:58 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Pavel, > >> > > >> > Thanks for your reply, But thats not the problem > >> > The disk is active and is set with to bootable. The problem presents it > >> > self only if I move Windows VM DIsks. > >> > All my Linux VM Disk's move across storage domains just fine. > >> > > >> > As a matter of fact I moved the disk back to the original nfs domain and > >> > it started working. > >> > Could this be a bug? > >> > >> Can you share the vdsm log showing startup of the vm when the disk is on > >> on nfs storage domain (vm starts) and iscsi storage domain (vm fail)? > >> > >> The most interesting part in the logs is the libvirt xml describing the > >> vm. > >> > >> Nir > >> > >> > Regards, > >> > > >> > -- > >> > Fernando Fuentes > >> > ffuen...@txweather.org > >> > http://www.txweather.org > >> > > >> > On Fri, Jul 1, 2016, at 11:33 AM, Pavel Gashev wrote: > >> >> Fernando, > >> >> > >> >> One from VM disks have to have bootable flag. > >> >> See http://www.ovirt.org/images/wiki/Add_Virtual_Disk.png?1454370862 > >> >> > >> >> > >> >> On 01/07/16 19:09, "users-boun...@ovirt.org on behalf of Fernando > >> >> Fuentes" <users-boun...@ovirt.org on behalf of ffuen...@darktcp.net> > >> >> wrote: > >> >> > >> >> Team, > >> >> > >> >> After I successfully copy my template from one storage to another I was > >> >> able to move my VM disks from my nfs domain to my iscsi domain. > >> >> My linux vms which are basic template (No template) moved just fine and > >> >> boot just fine. > >> >> On the other hand my windows vms (Template) once moved they cant boot. > >> >> Complaining that there is no bootable disk available. > >> >> What is going on? > >> >> > >> >> oVirt 3.6.6 > >> >> Hosts Centos 6.6 x86_64 > >> >> iSCSI Domain on TrueNAS Attached via ovirt. > >> >> > >> >> > >> >> -- > >> >> Fernando Fuentes > >> >> ffuen...@txweather.org > >> >> http://www.txweather.org > >> >> ___ > >> >> Users mailing list > >> >> Users@ovirt.org > >> >> http://lists.ovirt.org/mailman/listinfo/users > >> >> > >> >> > >> > ___ > >> > Users mailing list > >> > Users@ovirt.org > >> > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Nir, I apologize I'll look for it ASAP. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 1, 2016, at 03:22 PM, Nir Soffer wrote: > Fernando, > > These logs do not contain the libvirt xml. > > I want to see the part that start like this: > > Thread-17656::INFO::2016-07-01 23:17:33,845::vm::2032::virt.vm::(_run) > vmId=`f66da2b0-0f71-490b-a57e-eceb9be9cade`:: encoding="utf-8"?> > http://ovirt.org/vm/tune/1.0;> > test-iscsi > f66da2b0-0f71-490b-a57e-eceb9be9cade > ... > > The most important part is the devices sections showing the disks: > > > type="drive" unit="0"/> > dev="/rhev/data-center/f9374c0e-ae24-4bc1-a596-f61d5f05bc5f/5f35b5c0-17d7-4475-9125-e97f1cdb06f9/images/8f61b697-b3e4-4f63-8951-bdf9b6b39192/f409cc48-8248-4239-a4ea-66b0b1084416"/> > > 8f61b697-b3e4-4f63-8951-bdf9b6b39192 > > io="native" name="qemu" type="qcow2"/> > > > Please try to find the logs (probably already rotated to vdsm.log.N.xz) > containing the xml for this vm when running on nfs and iscsi. > > Nir > > On Fri, Jul 1, 2016 at 10:31 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Nir. > > > > Thank you for your reply. > > > > Attached is the vdsm log of the hosts that power on the vm in this > > example. > > > > VM name is Win7-QA5 > > vdsm_alpha.log was the host that started the VM when it got transfer to > > the iscsi domain. > > vdsm_zeta.log was the host that started the VM when it got transfer back > > to the nfs domain. > > > > I included everything for trouble shooting purposes. > > > > Also here is the engine log that talks about it as well: > > http://pastebin.com/3cHBNMcg > > > > Hope this helps. > > > > Regards, > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > > > On Fri, Jul 1, 2016, at 01:58 PM, Nir Soffer wrote: > >> On Fri, Jul 1, 2016 at 7:58 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Pavel, > >> > > >> > Thanks for your reply, But thats not the problem > >> > The disk is active and is set with to bootable. The problem presents it > >> > self only if I move Windows VM DIsks. > >> > All my Linux VM Disk's move across storage domains just fine. > >> > > >> > As a matter of fact I moved the disk back to the original nfs domain and > >> > it started working. > >> > Could this be a bug? > >> > >> Can you share the vdsm log showing startup of the vm when the disk is on > >> on nfs storage domain (vm starts) and iscsi storage domain (vm fail)? > >> > >> The most interesting part in the logs is the libvirt xml describing the > >> vm. > >> > >> Nir > >> > >> > Regards, > >> > > >> > -- > >> > Fernando Fuentes > >> > ffuen...@txweather.org > >> > http://www.txweather.org > >> > > >> > On Fri, Jul 1, 2016, at 11:33 AM, Pavel Gashev wrote: > >> >> Fernando, > >> >> > >> >> One from VM disks have to have bootable flag. > >> >> See http://www.ovirt.org/images/wiki/Add_Virtual_Disk.png?1454370862 > >> >> > >> >> > >> >> On 01/07/16 19:09, "users-boun...@ovirt.org on behalf of Fernando > >> >> Fuentes" <users-boun...@ovirt.org on behalf of ffuen...@darktcp.net> > >> >> wrote: > >> >> > >> >> Team, > >> >> > >> >> After I successfully copy my template from one storage to another I was > >> >> able to move my VM disks from my nfs domain to my iscsi domain. > >> >> My linux vms which are basic template (No template) moved just fine and > >> >> boot just fine. > >> >> On the other hand my windows vms (Template) once moved they cant boot. > >> >> Complaining that there is no bootable disk available. > >> >> What is going on? > >> >> > >> >> oVirt 3.6.6 > >> >> Hosts Centos 6.6 x86_64 > >> >> iSCSI Domain on TrueNAS Attached via ovirt. > >> >> > >> >> > >> >> -- > >> >> Fernando Fuentes > >> >> ffuen...@txweather.org > >> >> http://www.txweather.org > >> >> ___ > >> >> Users mailing list > >> >> Users@ovirt.org > >> >> http://lists.ovirt.org/mailman/listinfo/users > >> >> > >> >> > >> > ___ > >> > Users mailing list > >> > Users@ovirt.org > >> > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk not bootable
Pavel, Thanks for your reply, But thats not the problem The disk is active and is set with to bootable. The problem presents it self only if I move Windows VM DIsks. All my Linux VM Disk's move across storage domains just fine. As a matter of fact I moved the disk back to the original nfs domain and it started working. Could this be a bug? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Fri, Jul 1, 2016, at 11:33 AM, Pavel Gashev wrote: > Fernando, > > One from VM disks have to have bootable flag. > See http://www.ovirt.org/images/wiki/Add_Virtual_Disk.png?1454370862 > > > On 01/07/16 19:09, "users-boun...@ovirt.org on behalf of Fernando > Fuentes" <users-boun...@ovirt.org on behalf of ffuen...@darktcp.net> > wrote: > > Team, > > After I successfully copy my template from one storage to another I was > able to move my VM disks from my nfs domain to my iscsi domain. > My linux vms which are basic template (No template) moved just fine and > boot just fine. > On the other hand my windows vms (Template) once moved they cant boot. > Complaining that there is no bootable disk available. > What is going on? > > oVirt 3.6.6 > Hosts Centos 6.6 x86_64 > iSCSI Domain on TrueNAS Attached via ovirt. > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] disk not bootable
Team, After I successfully copy my template from one storage to another I was able to move my VM disks from my nfs domain to my iscsi domain. My linux vms which are basic template (No template) moved just fine and boot just fine. On the other hand my windows vms (Template) once moved they cant boot. Complaining that there is no bootable disk available. What is going on? oVirt 3.6.6 Hosts Centos 6.6 x86_64 iSCSI Domain on TrueNAS Attached via ovirt. -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] moving disk from nfs to iscsi
Solved my own issue. :) Thanks guys! -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Jun 30, 2016, at 02:40 PM, Fernando Fuentes wrote: > Team, I am trying to move my vms from one storage domain (NFS Shared) to > another (iSCSI Shared)... > > Same DC. Two clusters. NFS is on cluser a and iscsi iss on cluster b. > > When I try to move the disk in "cluster a" I am not getting the option > to move it the iscsi data domain on cluster b. > > Ovirt 3.6.6 all centos 6.6 x86_64 hosts > > Any ideas why? > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] moving disk from nfs to iscsi
Team, I am trying to move my vms from one storage domain (NFS Shared) to another (iSCSI Shared)... Same DC. Two clusters. NFS is on cluser a and iscsi iss on cluster b. When I try to move the disk in "cluster a" I am not getting the option to move it the iscsi data domain on cluster b. Ovirt 3.6.6 all centos 6.6 x86_64 hosts Any ideas why? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Change ip host
Nicola, I guess this all boils down on the type of storage domain you have setup... If its shared than your vms will be ok. If its Local than if something goes wrong with the hosts than you could be in lots of trouble. I went through something similar... I had to move DC (one host on the main DC) the hosts took a crap... I thought I lost everything but to my understanding the VM's are in my storage domain (iSCSI) as soon as I brought a new host online (same hostname) it all worked just fine. My procedure was as follow: Remove broken host from ovirt. Re-install host re add host to ovirt Things came back online on its own... WIN :) Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jun 29, 2016, at 09:24 AM, nicola.gentile.to wrote: > Hi, > I have installed ovirt 3.6 with 1 manager and 1 host > I need to change the ip, I decided to do the following: > > 1. put the host in maintenance mode > 2. remove the host > 3. update the information on the dns server with new ip > 4. reinstall the host with the correct ip > 5. add the host to the ovirt infrastructure > > questions: > > 1. is there the possibility of losing vm during this operation? > 2. is it necessary remove the host for the re-installation? > 3. is it necessary put the host in maintenance mode to remove it from > ovirt infrastructure? > > thanks a lot > > Nicola > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] restore of backup fail when Migrating to ovirt-engine 4.0
Just curious. Is the ovirt where the backup is coming from above version 3.6.6? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Jun 27, 2016, at 10:44 AM, Simone Tiraboschi wrote: > On Mon, Jun 27, 2016 at 5:05 PM, Ricky Schneberger <ri...@schneberger.se> > wrote: > > Hi, > > > > I ran my oVirt 3.6 on Centos6 and because of that I had to do a manual > > migration when trying to move to oVirt 4.0. > > > > http://www.ovirt.org/documentation/migration-engine-3.6-to-4.0/ > > > > Everything went OK until I did the restore, > > > > ## engine-backup --mode=restore --no-restore-permissions --provision-db > > --file=engine-backup.tar.gz --log=engine-backup-restore.log > > > > Preparing to restore: > > - Unpacking file 'engine-backup.tar.gz' > > FATAL: Backup was created by version '3.6' and can not be restored using > > the installed version 4.1 > > This looks pretty strange: it should be 4.0 and it should work. > > Can you please share the list of oVirt packages you installed on the > engine server? > Can you please share your oVirt repo details? > > > and then I got stucked. Is there something I need to do when I do the > > backup? > > > > My old oVirt-engine was version ovirt-engine-3.6.3.4-1.el6.noarch > > > > regards > > > > -- > > Ricky Schneberger > > > > > > > > Use PGP to protect your own privacy! > > > > Key fingerprint = 59E1 2B00 C28B 6E0D C8D1 D85B 39AA 7CD5 B88C 0B63 > > Key-ID: 0xB88C0B63 > > > > > > > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDI experience to share?
On that same note... I would love to deploy several Thin clients around my house using a single Centos Server for my kids to use. Is this still not possible? Do I still have to assign each of my kids a vm? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jun 15, 2016, at 12:20 PM, Gianluca Cecchi wrote: > > Il 15/Giu/2016 17:29, "Giorgio Bersano" <giorgio.bers...@gmail.com> ha > scritto: > > > > 2016-06-15 12:21 GMT+02:00 Donny Davis <do...@fortnebula.com>: > > > Do you have a requirement for 3d acceleration on the VDI guests? > > > > On the first deployment no, it is basically for frontend and > > backend > > office activity. > > But we would probably also asked to try it for multimedia > > activities > > like casual guests watching internet videos at the local public > > library. > > So two different kind of devices, I suppose. > > > > Anything to suggest? > > > > Thank you, > > Giorgio. > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > Why not a nuc, or similar device from other vendors that are emerging? > I don't know for the lan security part, but you can find a nuc5cpyh > with celeron or nuc5ppyh with pentium respectively at 140 and 170 > euros. Both have 6w tdp. > You have to add at least memory but with further 20 euros you > get 4gb. > Disk optional, you can use sdxc or boot from lan > Just a suggestion for further investigation. > I'm currently using a top line nuc6 as an hypervisor without any > problem with 3-4 vms, so I think a bottom line nuc can serve > optimally as a thin client without its costs. > Some of them have also Kensington anti theft that can be a good idea > due to their size. > Hih, > Gianluca > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] host usb
Giorgio, Thanks! The update to vdsm did the trick. Thanks again! Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Thu, Jun 16, 2016, at 09:21 AM, Giorgio Bersano wrote: > 2016-06-16 14:59 GMT+02:00 ffuentes <ffuen...@aasteel.com>: > > Giorgio, > > > > Thanks for your reply. > > > > Where can I get vdsm from 3.6.7* for my host? > > > > Thanks again! > > > > Regards, > > > > Fernando Fuentes > > > From the oVIrt site: "In order to install oVirt 3.6.7 Release > Candidate you've to enable oVirt 3.6 release candidate repository" so > you better use intructions in http://www.ovirt.org/release/3.6.7/ > > Obviously you have to put the host in mantenance before upgrading vdsm > but this is a normal operating procedure. > > Best Regards, > Giorgio. > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] host usb
I got the vm to start but the vm wont see the usb device. Any idaes? -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jun 15, 2016, at 09:21 PM, Fernando Fuentes wrote: > After upgrading my ovirt to 3.6 and configuring my host usb passthrough > again. My vm is unable to start with the following error message: > > VM methub is down with error. Exit message: Node device not found: no > node device with matching name 'usb' > > The host is running Centos 7 x86_64 > Any ideas? > > Regards, > > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] host usb
After upgrading my ovirt to 3.6 and configuring my host usb passthrough again. My vm is unable to start with the following error message: VM methub is down with error. Exit message: Node device not found: no node device with matching name 'usb' The host is running Centos 7 x86_64 Any ideas? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.5 to 3.6 upgrade
I think I fix my own issue. TIA! :D -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Jun 15, 2016, at 04:34 PM, Fernando Fuentes wrote: > Hello All! > > I am upgrading from 3.5 to 3.6 and I am running through some issues with > yum... > > I am running Centos 6.8 x86_64 > > Any ideas? > > Resolving Dependencies > --> Running transaction check > ---> Package ovirt-engine-setup.noarch 0:3.5.6.2-1.el6 will be updated > ---> Package ovirt-engine-setup.noarch 0:3.6.6.2-1.el6 will be an update > ---> Package ovirt-engine-setup-base.noarch 0:3.5.6.2-1.el6 will be > updated > ---> Package ovirt-engine-setup-base.noarch 0:3.6.6.2-1.el6 will be an > update > --> Processing Dependency: ovirt-engine-lib >= 3.6.6.2-1.el6 for > package: ovirt-engine-setup-base-3.6.6.2-1.el6.noarch > --> Processing Dependency: otopi >= 1.4.1 for package: > ovirt-engine-setup-base-3.6.6.2-1.el6.noarch > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.5.6.2-1.el6 will be updated > --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine = > 3.5.6.2-1.el6 for package: > ovirt-engine-setup-plugin-allinone-3.5.6.2-1.el6.noarch > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.6.6.2-1.el6 will be an update > --> Processing Dependency: > ovirt-engine-setup-plugin-vmconsole-proxy-helper = 3.6.6.2-1.el6 for > package: ovirt-engine-setup-plugin-ovirt-engine-3.6.6.2-1.el6.noarch > --> Processing Dependency: ovirt-engine-extension-aaa-jdbc for package: > ovirt-engine-setup-plugin-ovirt-engine-3.6.6.2-1.el6.noarch > ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch > 0:3.5.6.2-1.el6 will be updated > ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch > 0:3.6.6.2-1.el6 will be an update > --> Processing Dependency: ovirt-setup-lib for package: > ovirt-engine-setup-plugin-ovirt-engine-common-3.6.6.2-1.el6.noarch > ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch > 0:3.5.6.2-1.el6 will be updated > ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch > 0:3.6.6.2-1.el6 will be an update > --> Running transaction check > ---> Package otopi.noarch 0:1.3.2-1.el6 will be updated > --> Processing Dependency: otopi = 1.3.2-1.el6 for package: > otopi-java-1.3.2-1.el6.noarch > ---> Package otopi.noarch 0:1.4.1-1.el6 will be an update > ---> Package ovirt-engine-extension-aaa-jdbc.noarch 0:1.0.7-1.el6 will > be installed > ---> Package ovirt-engine-lib.noarch 0:3.5.6.2-1.el6 will be updated > ---> Package ovirt-engine-lib.noarch 0:3.6.6.2-1.el6 will be an update > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.5.6.2-1.el6 will be updated > --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine = > 3.5.6.2-1.el6 for package: > ovirt-engine-setup-plugin-allinone-3.5.6.2-1.el6.noarch > ---> Package ovirt-engine-setup-plugin-vmconsole-proxy-helper.noarch > 0:3.6.6.2-1.el6 will be installed > ---> Package ovirt-setup-lib.noarch 0:1.0.1-1.el6 will be installed > --> Running transaction check > ---> Package otopi-java.noarch 0:1.3.2-1.el6 will be updated > ---> Package otopi-java.noarch 0:1.4.1-1.el6 will be an update > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.5.6.2-1.el6 will be updated > --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine = > 3.5.6.2-1.el6 for package: > ovirt-engine-setup-plugin-allinone-3.5.6.2-1.el6.noarch > --> Processing Conflict: ovirt-engine-setup-base-3.6.6.2-1.el6.noarch > conflicts ovirt-engine-reports-setup < 3.6.0 > --> Restarting Dependency Resolution with new changes. > --> Running transaction check > ---> Package ovirt-engine-reports-setup.noarch 0:3.5.5-2.el6 will be > updated > ---> Package ovirt-engine-reports-setup.noarch 0:3.6.5.1-1.el6 will be > an update > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.5.6.2-1.el6 will be updated > --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine = > 3.5.6.2-1.el6 for package: > ovirt-engine-setup-plugin-allinone-3.5.6.2-1.el6.noarch > --> Processing Conflict: ovirt-engine-setup-base-3.6.6.2-1.el6.noarch > conflicts ovirt-engine-dwh-setup < 3.6.0 > --> Restarting Dependency Resolution with new changes. > --> Running transaction check > ---> Package ovirt-engine-dwh-setup.noarch 0:3.5.5-1.el6 will be updated > ---> Package ovirt-engine-dwh-setup.noarch 0:3.6.6-1.el6 will be an > update > ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch > 0:3.5.6.2-1.el6 will be updated > --> Processing Dependency: ovirt-engine-setup-plugin-ovirt-engine
[ovirt-users] 3.5 to 3.6 upgrade
setup-plugin-ovirt-engine = 3.6.6.2-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.0.3-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.0.3-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.1.3-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.1.3-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.2.6-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.2.6-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.3.4-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.3.4-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.4.1-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.4.1-1.el6 Available: ovirt-engine-setup-plugin-ovirt-engine-3.6.5.3-1.el6.noarch (ovirt-3.6) ovirt-engine-setup-plugin-ovirt-engine = 3.6.5.3-1.el6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest [root@ovirt-dev yum.repos.d]# Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt reports
Didi, Yes. I still get empty reports. :( -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Wed, Apr 6, 2016, at 02:08 AM, Yedidyah Bar David wrote: > On Wed, Apr 6, 2016 at 9:51 AM, Shirly Radco <sra...@redhat.com> wrote: > > Hi, > > > > No. You don't need to reinstall. > > > > There should be a cron job that restarts the dwh service after it is down > > for an hour. > > Didi, In what cases it will not start? > > The log, posted earlier in this thread, seems to show it's actually > running: > > > > > Best regards, > > Shirly > > > > Shirly Radco > > BI Software Engineer > > Red Hat Israel Ltd. > > 34 Jerusalem Road > > Building A, 4th floor > > Ra'anana, Israel 4350109 > > > > > > On Tue, Apr 5, 2016 at 6:49 PM, Fernando Fuentes <ffuen...@darktcp.net> > > wrote: > >> > >> Team, > >> > >> Digging deaper I found that I do have data and create reports up to Oct of > >> 2015 Somewhere in Nov 2015 it stop hence why I cant see recent data. > >> A good note to the list is that November is right around the month I did > >> the update to 3.5.4.2-1.el6 > >> Do I have to re-installovirt-engine-reports? > >> > >> Regards, > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> > >> > >> > >> On Tue, Apr 5, 2016, at 10:23 AM, Fernando Fuentes wrote: > >> > >> As requested all dumps and info are at: > >> > >> http://pastebin.com/RMSP8HFB > >> > >> All systems are running the guest agent. > >> > >> Regards, > >> > >> -- > >> Fernando Fuentes > >> ffuen...@txweather.org > >> http://www.txweather.org > >> > >> > >> > >> On Tue, Apr 5, 2016, at 03:38 AM, Shirly Radco wrote: > >> > >> Hi Fernando, > >> > >> Please check guest agent is running on all hosts. > >> Please also check if you see data from recent days in table > >> "host_hourly_history". > >> > >> Best regards, > >> Shirly Radco > >> > >> > >> > >> Shirly Radco > >> BI Software Engineer > >> Red Hat Israel Ltd. > >> 34 Jerusalem Road > >> Building A, 4th floor > >> Ra'anana, Israel 4350109 > >> > >> > >> On Tue, Apr 5, 2016 at 9:02 AM, Yedidyah Bar David <d...@redhat.com> > >> wrote: > >> > >> On Mon, Apr 4, 2016 at 8:53 PM, Fernando Fuentes <ffuen...@darktcp.net> > >> wrote: > >> > Didi, > >> > > >> > As requested. > >> > > >> > > >> > [root@ovirt-dev ~]# service ovirt-engine-dwhd status > >> > ovirt-engine-dwhd (pid 32410) is running... > >> > [root@ovirt-dev ~]# > >> > > >> > The log is over at pastebin to prevent a huge email/ > >> > > >> > http://pastebin.com/hPcYCKVE > >> > > >> > Hope that is ok. > >> > >> The log looks mostly ok to me. > > The end of it looked like this: > > 2015-11-01 > 02:00:29|YigZCz|UkJGNp|IMHBxO|OVIRT_ENGINE_DWH|SampleTimeKeepingJob|Default|5|tWarn|tWarn_1|Can > not sample data, oVirt Engine is not updating the statistics. Please > check your oVirt Engine status.|9704 > 2016-04-03 14:57:41|ETL Service Stopped > 2016-04-03 15:12:41|ETL Service Started > > From this, I understood that: > 1. Many months ago, either there was some problem (e.g. dwhd could not > connect to engine db, or not see updates there, or whatever) or simply > there was no new data (engine was down, or simply nothing changed (is > this possible?)). > 2. Then things became ok for several months (or at least, nothing > caused dwhd to say otherwise) > 3. Then dwhd was restarted, perhaps for an upgrade, and still no new > errors. > > Fernando: Do you still only get empty reports? > > >> > >> Was this a normal, default setup? > >> > >> Please post the output of: > >> > >> su - postgres -c 'psql -c \\l' > >> > >> su - postgres -c "psql -c 'SELECT pg_database.datname, > >> pg_size_pretty(pg_database_size(pg_database.datname)) FROM > >> pg_database'" > >> > >> su - postgres -c "psql ovirt_engine_reports -c 'select > >> connectionurl,username from jijdbcdatasource'" > >> > >> grep DATABASE /etc/ovirt-engine/engine.conf.d/* > >> /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/* > >> > >> grep dbName /var/lib/ovirt-engine-reports/build-conf/master.properties > >> > >> Adding Shirly. > >> -- > >> Didi > >> > >> > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > >> > >> > >> ___ > >> Users mailing list > >> Users@ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > > > > > > -- > Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt reports
Team, Digging deaper I found that I do have data and create reports up to Oct of 2015 Somewhere in Nov 2015 it stop hence why I cant see recent data. A good note to the list is that November is right around the month I did the update to 3.5.4.2-1.el6 Do I have to re-installovirt-engine-reports? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Tue, Apr 5, 2016, at 10:23 AM, Fernando Fuentes wrote: > As requested all dumps and info are at: > > http://pastebin.com/RMSP8HFB > > All systems are running the guest agent. > > Regards, > > -- > Fernando Fuentes > ffuen...@txweather.org > http://www.txweather.org > > > > On Tue, Apr 5, 2016, at 03:38 AM, Shirly Radco wrote: >> Hi Fernando, >> >> Please check guest agent is running on all hosts. >> Please also check if you see data from recent days in table >> "host_hourly_history". >> >> Best regards, >> Shirly Radco >> >> >> Shirly Radco BI Software Engineer Red Hat Israel Ltd. 34 Jerusalem >> Road Building A, 4th floor Ra'anana, Israel 4350109 >> >> On Tue, Apr 5, 2016 at 9:02 AM, Yedidyah Bar David >> <d...@redhat.com> wrote: >>> On Mon, Apr 4, 2016 at 8:53 PM, Fernando Fuentes >>> <ffuen...@darktcp.net> wrote: >>> > Didi, >>> > >>> > As requested. >>> > >>> > >>> > [root@ovirt-dev ~]# service ovirt-engine-dwhd status ovirt-engine- >>> > dwhd (pid 32410) is running... [root@ovirt-dev ~]# >>> > >>> > The log is over at pastebin to prevent a huge email/ >>> > >>> > http://pastebin.com/hPcYCKVE >>> > >>> > Hope that is ok. >>> >>> The log looks mostly ok to me. >>> >>> Was this a normal, default setup? >>> >>> Please post the output of: >>> >>> su - postgres -c 'psql -c \\l' >>> >>> su - postgres -c "psql -c 'SELECT pg_database.datname, >>> pg_size_pretty(pg_database_size(pg_database.datname)) FROM >>> pg_database'" >>> >>> su - postgres -c "psql ovirt_engine_reports -c 'select >>> connectionurl,username from jijdbcdatasource'" >>> >>> grep DATABASE /etc/ovirt-engine/engine.conf.d/* >>> /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/* >>> >>> grep dbName /var/lib/ovirt-engine-reports/build- >>> conf/master.properties >>> >>> Adding Shirly. >>> -- >>> Didi > > _ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt reports
As requested all dumps and info are at: http://pastebin.com/RMSP8HFB All systems are running the guest agent. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Tue, Apr 5, 2016, at 03:38 AM, Shirly Radco wrote: > Hi Fernando, > > Please check guest agent is running on all hosts. > Please also check if you see data from recent days in table > "host_hourly_history". > > Best regards, > Shirly Radco > > > Shirly Radco BI Software Engineer Red Hat Israel Ltd. 34 Jerusalem > Road Building A, 4th floor Ra'anana, Israel 4350109 > > On Tue, Apr 5, 2016 at 9:02 AM, Yedidyah Bar David > <d...@redhat.com> wrote: >> On Mon, Apr 4, 2016 at 8:53 PM, Fernando Fuentes >> <ffuen...@darktcp.net> wrote: >> > Didi, >> > >> > As requested. >> > >> > >> > [root@ovirt-dev ~]# service ovirt-engine-dwhd status ovirt-engine- >> > dwhd (pid 32410) is running... [root@ovirt-dev ~]# >> > >> > The log is over at pastebin to prevent a huge email/ >> > >> > http://pastebin.com/hPcYCKVE >> > >> > Hope that is ok. >> >> The log looks mostly ok to me. >> >> Was this a normal, default setup? >> >> Please post the output of: >> >> su - postgres -c 'psql -c \\l' >> >> su - postgres -c "psql -c 'SELECT pg_database.datname, >> pg_size_pretty(pg_database_size(pg_database.datname)) FROM >> pg_database'" >> >> su - postgres -c "psql ovirt_engine_reports -c 'select >> connectionurl,username from jijdbcdatasource'" >> >> grep DATABASE /etc/ovirt-engine/engine.conf.d/* >> /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/* >> >> grep dbName /var/lib/ovirt-engine-reports/build- >> conf/master.properties >> >> Adding Shirly. >> -- >> Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt reports
Didi, As requested. [root@ovirt-dev ~]# service ovirt-engine-dwhd status ovirt-engine-dwhd (pid 32410) is running... [root@ovirt-dev ~]# The log is over at pastebin to prevent a huge email/ http://pastebin.com/hPcYCKVE Hope that is ok. Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org On Mon, Apr 4, 2016, at 09:15 AM, Yedidyah Bar David wrote: > On Mon, Apr 4, 2016 at 4:54 PM, Fernando Fuentes <ffuen...@darktcp.net> > wrote: > > Team, > > > > I am trying to run an ovirt report (Summary of Host usage) and I get "No > > Data Available" > > The logs show no errors. > > > > I am running oVirt Engine Version: 3.5.4.2-1.el6 with Ovirt Reports. > > > > Any ideas? > > Is dwh running? Please check/post its logs. Thanks. > > > > > Regards, > > > > -- > > Fernando Fuentes > > ffuen...@txweather.org > > http://www.txweather.org > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > -- > Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt reports
Team, I am trying to run an ovirt report (Summary of Host usage) and I get "No Data Available" The logs show no errors. I am running oVirt Engine Version: 3.5.4.2-1.el6 with Ovirt Reports. Any ideas? Regards, -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] SPM
Team, I noticed that my SPM moved to another host which was odd because I have a set SPM. Somehow when that happen two of my hosts went down and all my vms when in pause state. The oddity behind all this is that my primary storage which has allways been my SPM was online without any issues.. What could of have cause that? and is there a way prevent from the SPM migrating unless there is an issue? -- Fernando Fuentes ffuen...@txweather.org http://www.txweather.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users