Re: [ovirt-users] Hosted-engine without mac-spoofing

[Matteo Capuano]

On Mon, Jan 22, 2018 at 10:31 AM, Dan Kenigsberg <dan...@redhat.com> wrote:

> On Mon, Jan 22, 2018 at 12:01 AM, Matteo Capuano <kapu@gmail.com>
> wrote:
> > Hi folks,
> >
> > i'm trying to install oVirt hyperconverged on Google Cloud Engine (GCE)
> to
> > create a lab environment.
> > Nested virtualization on GCE is in public beta, it seems to work fine but
> > there's a catch: i cannot enable mac-spoofing on the GCE instances' nics.
> > So here's my question: is there a way to install hosted-engine on a
> network
> > there you can't enabling mac-spoofing?
>
> I don't quite understand. Can you start multiple nested VM in a single
> GCE node, each communicating with its own mac? I believe that you'd
> need mac-spoofing for that simple task, too.
>

I can start three nested VMs in a single GCE instance and have them
communicating with each others but this is going to add another
virtualization level on my lab.

What I'm trying to do is to launch three different GCE instances with
Centos 7.4 and install on each of them the hyperconverged nodes. GCE
doesn't allow to enable mac-spoofing on instance's nics so I'm unable to
communicate with the engine from outside the host where it's installed.
To make a nested VMs to be accessible from outside the host, GCE suggest to
use a bridge network with iptables forwarding rules (
https://cloud.google.com/compute/docs/instances/enable-nested-virtualization-vm-instances#configuring_a_nested_vm_to_be_accessible_from_outside_the_host_vm
) but this is not going to work with high-availability.



>
> Self-hosted engine has to be highly-available. It has to run equally
> well on all hosted-engine hosts, thus I believe it needs all hosts to
> allow mac-spoofing.
>

So I'm trying to do something impossible.



@Sandro : this is a test environment. I'm learning to use oVirt in my
off-work time so I'm trying to see if I can move my learning platform from
a dedicated server to a cloud service.



Thank you both

Matteo
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Hosted-engine without mac-spoofing

[Matteo Capuano]

Hi folks,

i'm trying to install oVirt hyperconverged on Google Cloud Engine (GCE) to
create a lab environment.
Nested virtualization on GCE is in public beta, it seems to work fine but
there's a catch: i cannot enable mac-spoofing on the GCE instances' nics.
So here's my question: is there a way to install hosted-engine on a network
there you can't enabling mac-spoofing?

Thank you

Cheers

Matteo
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Regarding Ovirt Installation

[Matteo Capuano]

Da: Simone Tiraboschi
Inviato: giovedì 21 dicembre 21:24
Oggetto: Re: [ovirt-users] Regarding Ovirt Installation
A: Matteo Capuano
Cc: Martin Sivak, ruth john, users




On Thu, Dec 21, 2017 at 8:19 PM, Matteo Capuano 
<kapu@gmail.com<mailto:kapu@gmail.com>> wrote:
@Ruth John:

- if not can anyone please help me to install atleast on one to make me 
understand where am i doing the mistake.

I'm using oVirt on a OVH's dedicated server. The bare metal works as host and 
the engine is installed on a OVH's public cloud VM. I've also nested three 
other oVirts inside the host.
Maybe i could help you , what's your issue? I'd put my money on OVH network 
configuration :)

In 4.2 we have a better OVN support which should definitively help there.
Why not write and share a small blog post with your oVirt on OVH hints?

I'd be glad to do it!
Maybe i'll be able to use some spare time during the holydays.



@Martin Sivak

- one of the new features of oVirt 4.2 is support for Replica 1 all in one 
setup using hosted engine and gluster in hyper-converged mode.

Interesting. Maybe I don't understand it because I'm a newbie but...what's the 
meaning of a replica 1 solution? I mean, if i have only one host where's the 
replica?

Of course no replica with replica 1, but you could start like that then add 
other 2 hosts in the future and gain replica 3 just with a little 
reconfiguration and probably also without any downtime.



Cheer

Matteo

On Thu, Dec 21, 2017 at 2:21 PM, Martin Sivak 
<msi...@redhat.com<mailto:msi...@redhat.com>> wrote:
Hi,

one of the new features of oVirt 4.2 is support for Replica 1 all in
one setup using hosted engine and gluster in hyper-converged mode.

So it should be again possible to use just a single host for
everything, I am not sure we have a documentation ready for that
though.

Best regards

Martin Sivak

On Thu, Dec 21, 2017 at 2:15 PM, Simone Tiraboschi 
<stira...@redhat.com<mailto:stira...@redhat.com>> wrote:
>
>
> On Thu, Dec 21, 2017 at 1:59 PM, ruth john 
> <gamerangerserve...@gmail.com<mailto:gamerangerserve...@gmail.com>>
> wrote:
>>
>> Sir, buying nfs storage would cost me a lot. Can't I use it directly on
>> the provided storage?
>
>
> We don't have anymore an all-in-one installation where the engine and vdsm
> runs altogether in the same machine; the proposed replacement is
> hosted-engine which doesn't work with local storage since it's supposed to
> be able to restart the engine VM somewhere else for HA reasons and the local
> storage is against that by definition.
> If you have three machines I'd suggest an hyperconverged gluster deployment
> with replica 3.
>
> If you want to try it on a single machine keep present that NFS in loop-back
> is discouraged so maybe you could try iSCSI or, maybe with a small hack,
> gluster in replica 1 in loopback
>
>
>>
>>
>>
>> On Dec 21, 2017 1:25 PM, "Simone Tiraboschi" 
>> <stira...@redhat.com<mailto:stira...@redhat.com>> wrote:
>>
>>
>>
>> On Wed, Dec 20, 2017 at 10:45 PM, ruth john 
>> <gamerangerserve...@gmail.com<mailto:gamerangerserve...@gmail.com>>
>> wrote:
>>>
>>> I am delighted with the interface and other features of the Ovirt but was
>>> never able to install it properly, is that true OVirt doesn't support
>>> Hetzner Dedicated and OVH dedicated?
>>
>>
>> I personally know about a friend who is running it on an a couple of
>> dedicated OVH machines with NFS storage provided by OVH.
>> No idea about Hetzner.
>>
>>
>>>
>>> if not can anyone please help me to install atleast on one to make me
>>> understand where am i doing the mistake.
>>>
>>> ___
>>> Users mailing list
>>> Users@ovirt.org<mailto:Users@ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>>
>
>
> ___
> Users mailing list
> Users@ovirt.org<mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Regarding Ovirt Installation

[Matteo Capuano]

@Ruth John:



*- if not can anyone please help me to install atleast on one to make me
understand where am i doing the mistake.*
I'm using oVirt on a OVH's dedicated server. The bare metal works as host
and the engine is installed on a OVH's public cloud VM. I've also nested
three other oVirts inside the host.
Maybe i could help you , what's your issue? I'd put my money on OVH network
configuration :)


@Martin Sivak



*- one of the new features of oVirt 4.2 is support for Replica 1 all in one
setup using hosted engine and gluster in hyper-converged mode.*
Interesting. Maybe I don't understand it because I'm a newbie but...what's
the meaning of a replica 1 solution? I mean, if i have only one host
where's the replica?


Cheer

Matteo

On Thu, Dec 21, 2017 at 2:21 PM, Martin Sivak  wrote:

> Hi,
>
> one of the new features of oVirt 4.2 is support for Replica 1 all in
> one setup using hosted engine and gluster in hyper-converged mode.
>
> So it should be again possible to use just a single host for
> everything, I am not sure we have a documentation ready for that
> though.
>
> Best regards
>
> Martin Sivak
>
> On Thu, Dec 21, 2017 at 2:15 PM, Simone Tiraboschi 
> wrote:
> >
> >
> > On Thu, Dec 21, 2017 at 1:59 PM, ruth john  >
> > wrote:
> >>
> >> Sir, buying nfs storage would cost me a lot. Can't I use it directly on
> >> the provided storage?
> >
> >
> > We don't have anymore an all-in-one installation where the engine and
> vdsm
> > runs altogether in the same machine; the proposed replacement is
> > hosted-engine which doesn't work with local storage since it's supposed
> to
> > be able to restart the engine VM somewhere else for HA reasons and the
> local
> > storage is against that by definition.
> > If you have three machines I'd suggest an hyperconverged gluster
> deployment
> > with replica 3.
> >
> > If you want to try it on a single machine keep present that NFS in
> loop-back
> > is discouraged so maybe you could try iSCSI or, maybe with a small hack,
> > gluster in replica 1 in loopback
> >
> >
> >>
> >>
> >>
> >> On Dec 21, 2017 1:25 PM, "Simone Tiraboschi" 
> wrote:
> >>
> >>
> >>
> >> On Wed, Dec 20, 2017 at 10:45 PM, ruth john <
> gamerangerserve...@gmail.com>
> >> wrote:
> >>>
> >>> I am delighted with the interface and other features of the Ovirt but
> was
> >>> never able to install it properly, is that true OVirt doesn't support
> >>> Hetzner Dedicated and OVH dedicated?
> >>
> >>
> >> I personally know about a friend who is running it on an a couple of
> >> dedicated OVH machines with NFS storage provided by OVH.
> >> No idea about Hetzner.
> >>
> >>
> >>>
> >>> if not can anyone please help me to install atleast on one to make me
> >>> understand where am i doing the mistake.
> >>>
> >>> ___
> >>> Users mailing list
> >>> Users@ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>
> >>
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Self-Hosted engine 4.1.7 unavailable from the outside of the host

[Matteo Capuano]

Now it works like a charm !!  Thanks again Simone.

On Mon, Dec 18, 2017 at 12:29 PM, Matteo Capuano <kapu@gmail.com> wrote:

>
>
> On Mon, Dec 18, 2017 at 11:19 AM, Simone Tiraboschi <stira...@redhat.com>
> wrote:
>
>>
>>
>> On Mon, Dec 18, 2017 at 11:09 AM, Matteo Capuano <kapu@gmail.com>
>> wrote:
>>
>>>
>>>
>>> On Mon, Dec 18, 2017 at 8:55 AM, Simone Tiraboschi <stira...@redhat.com>
>>> wrote:
>>>
>>>>
>>>>
>>>> On Sat, Dec 16, 2017 at 1:29 PM, Matteo Capuano <kapu@gmail.com>
>>>> wrote:
>>>>
>>>>> Hi everyone, my name’s Matteo and I’m a new oVirt user.
>>>>>
>>>>> I’m trying to install the gluster hyperconverged solution in a lab
>>>>> environment following the How-To wrote by Jason Brooks:
>>>>>
>>>>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1
>>>>> -and-gluster-storage/
>>>>>
>>>>> Sadly, I cannot understand how to configure the network on the
>>>>> self-hosted engine and I’m unable to make it available from outside the
>>>>> host.
>>>>>
>>>>> As written in the HowTo I created three hosts (ovirt-note 4.1.7) each
>>>>> one with two nics, one for gluster and one for management, the network is 
>>>>> a
>>>>> static LAN with FQDN resolvable (also reverse) by a local DNS. Here the
>>>>> details:
>>>>>
>>>>> Gateway: 172.16.1.1
>>>>>
>>>>> DNS: 172.16.1.12
>>>>>
>>>>> Host1: 172.16.1.210 (management) – 172.16.2.210 (gluster)
>>>>>
>>>>> Host2: 172.16.1.220 (management) – 172.16.2.220 (gluster)
>>>>>
>>>>> Host3: 172.16.1.230 (management) – 172.16.2.230 (gluster)
>>>>>
>>>>> Engine: 172.16.1.200
>>>>>
>>>>> When installing the engine I choose to brigde the management’s nic
>>>>> (172.16.1.210) of host1 but, once the installation is completed, I'm 
>>>>> unable
>>>>> to reach the engine from the LAN where the hosts are connected. The engine
>>>>> (172.16.1.200) can ping only host1 (172.16.1.210) and only host1 can ping
>>>>> the engine.
>>>>>
>>>>> As far as my network knowledge goes, to make the engine available from
>>>>> the outside of host1 I would need to use a third nic or to use some device
>>>>> to associate the ip and MAC address of the engine’s nic.
>>>>>
>>>> Ciao Matteo,
>>>> no, hosted-engine-setup should create a bridge for you.
>>>> No need to do custom configuration to expose your VMs.
>>>>
>>>> Are you trying on bare metal or on VMs with the engine VM as a nested
>>>> VM?
>>>>
>>>
>>> Ciao Simone,
>>>
>>> thank you for your answer.
>>>
>>> My lab is a nested environmet. I installed ovirt on bare metal with the
>>> engine on another machine. On this setup i have 6 VMs:
>>>
>>> - 172.16.1.1  pfSense as firewall/gateway
>>> - 172.16.1.10  a windows 2016 used as network guest
>>> - 172.16.1.12  a nethserver installation as DNS server ( also on
>>> 172.16.2.12 )
>>> - the three ovirt-nodes as i described on my e-mail
>>>
>>> All the machines are pingable, only the engine inside host 1 is
>>> unreachable and can ping only host1.
>>>
>>
>> OK, your issue is caused by vdsm-no-mac-spoofing filter on your L1 VMs.
>> Please create a custom vNic profile on your external oVirt engine setting
>> the "network filter" field to "no network filter".
>> Now you can edit your ovirt-node VMs setting the network profile of the
>> nics you are going to use for the management bridge to the profile with "no
>> network filter".
>> You have to shutdown and restart your ovirt-node VMs and then you could
>> retry the deployment.
>>
>
>
> Thank you for the explanation, I'm going to try it in the evening. I'll
> keep you posted.
>
> Cheers
>
>
>>
>>
>>
>>>
>>>
>>> Cheers
>>>
>>> Matteo
>>>
>>>
>>>>
>>>>> I’ve looked around over the internet for a solution but every how-to
>>>>> I’ve found follows the same steps of Jason’s.  I’ve also already
>>>>> asked for help to Jason.
>>>>>
>>>>> Anyone could help me to solve this issue?
>>>>>
>>>>>
>>>>>
>>>>> Thank you
>>>>>
>>>>>
>>>>>
>>>>> Matteo
>>>>>
>>>>> ___
>>>>> Users mailing list
>>>>> Users@ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Self-Hosted engine 4.1.7 unavailable from the outside of the host

[Matteo Capuano]

On Mon, Dec 18, 2017 at 11:19 AM, Simone Tiraboschi <stira...@redhat.com>
wrote:

>
>
> On Mon, Dec 18, 2017 at 11:09 AM, Matteo Capuano <kapu@gmail.com>
> wrote:
>
>>
>>
>> On Mon, Dec 18, 2017 at 8:55 AM, Simone Tiraboschi <stira...@redhat.com>
>> wrote:
>>
>>>
>>>
>>> On Sat, Dec 16, 2017 at 1:29 PM, Matteo Capuano <kapu@gmail.com>
>>> wrote:
>>>
>>>> Hi everyone, my name’s Matteo and I’m a new oVirt user.
>>>>
>>>> I’m trying to install the gluster hyperconverged solution in a lab
>>>> environment following the How-To wrote by Jason Brooks:
>>>>
>>>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1
>>>> -and-gluster-storage/
>>>>
>>>> Sadly, I cannot understand how to configure the network on the
>>>> self-hosted engine and I’m unable to make it available from outside the
>>>> host.
>>>>
>>>> As written in the HowTo I created three hosts (ovirt-note 4.1.7) each
>>>> one with two nics, one for gluster and one for management, the network is a
>>>> static LAN with FQDN resolvable (also reverse) by a local DNS. Here the
>>>> details:
>>>>
>>>> Gateway: 172.16.1.1
>>>>
>>>> DNS: 172.16.1.12
>>>>
>>>> Host1: 172.16.1.210 (management) – 172.16.2.210 (gluster)
>>>>
>>>> Host2: 172.16.1.220 (management) – 172.16.2.220 (gluster)
>>>>
>>>> Host3: 172.16.1.230 (management) – 172.16.2.230 (gluster)
>>>>
>>>> Engine: 172.16.1.200
>>>>
>>>> When installing the engine I choose to brigde the management’s nic
>>>> (172.16.1.210) of host1 but, once the installation is completed, I'm unable
>>>> to reach the engine from the LAN where the hosts are connected. The engine
>>>> (172.16.1.200) can ping only host1 (172.16.1.210) and only host1 can ping
>>>> the engine.
>>>>
>>>> As far as my network knowledge goes, to make the engine available from
>>>> the outside of host1 I would need to use a third nic or to use some device
>>>> to associate the ip and MAC address of the engine’s nic.
>>>>
>>> Ciao Matteo,
>>> no, hosted-engine-setup should create a bridge for you.
>>> No need to do custom configuration to expose your VMs.
>>>
>>> Are you trying on bare metal or on VMs with the engine VM as a nested VM?
>>>
>>
>> Ciao Simone,
>>
>> thank you for your answer.
>>
>> My lab is a nested environmet. I installed ovirt on bare metal with the
>> engine on another machine. On this setup i have 6 VMs:
>>
>> - 172.16.1.1  pfSense as firewall/gateway
>> - 172.16.1.10  a windows 2016 used as network guest
>> - 172.16.1.12  a nethserver installation as DNS server ( also on
>> 172.16.2.12 )
>> - the three ovirt-nodes as i described on my e-mail
>>
>> All the machines are pingable, only the engine inside host 1 is
>> unreachable and can ping only host1.
>>
>
> OK, your issue is caused by vdsm-no-mac-spoofing filter on your L1 VMs.
> Please create a custom vNic profile on your external oVirt engine setting
> the "network filter" field to "no network filter".
> Now you can edit your ovirt-node VMs setting the network profile of the
> nics you are going to use for the management bridge to the profile with "no
> network filter".
> You have to shutdown and restart your ovirt-node VMs and then you could
> retry the deployment.
>


Thank you for the explanation, I'm going to try it in the evening. I'll
keep you posted.

Cheers


>
>
>
>>
>>
>> Cheers
>>
>> Matteo
>>
>>
>>>
>>>> I’ve looked around over the internet for a solution but every how-to
>>>> I’ve found follows the same steps of Jason’s.  I’ve also already asked
>>>> for help to Jason.
>>>>
>>>> Anyone could help me to solve this issue?
>>>>
>>>>
>>>>
>>>> Thank you
>>>>
>>>>
>>>>
>>>> Matteo
>>>>
>>>> ___
>>>> Users mailing list
>>>> Users@ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Self-Hosted engine 4.1.7 unavailable from the outside of the host

[Matteo Capuano]

On Mon, Dec 18, 2017 at 8:55 AM, Simone Tiraboschi <stira...@redhat.com>
wrote:

>
>
> On Sat, Dec 16, 2017 at 1:29 PM, Matteo Capuano <kapu@gmail.com>
> wrote:
>
>> Hi everyone, my name’s Matteo and I’m a new oVirt user.
>>
>> I’m trying to install the gluster hyperconverged solution in a lab
>> environment following the How-To wrote by Jason Brooks:
>>
>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.
>> 1-and-gluster-storage/
>>
>> Sadly, I cannot understand how to configure the network on the
>> self-hosted engine and I’m unable to make it available from outside the
>> host.
>>
>> As written in the HowTo I created three hosts (ovirt-note 4.1.7) each one
>> with two nics, one for gluster and one for management, the network is a
>> static LAN with FQDN resolvable (also reverse) by a local DNS. Here the
>> details:
>>
>> Gateway: 172.16.1.1
>>
>> DNS: 172.16.1.12
>>
>> Host1: 172.16.1.210 (management) – 172.16.2.210 (gluster)
>>
>> Host2: 172.16.1.220 (management) – 172.16.2.220 (gluster)
>>
>> Host3: 172.16.1.230 (management) – 172.16.2.230 (gluster)
>>
>> Engine: 172.16.1.200
>>
>> When installing the engine I choose to brigde the management’s nic
>> (172.16.1.210) of host1 but, once the installation is completed, I'm unable
>> to reach the engine from the LAN where the hosts are connected. The engine
>> (172.16.1.200) can ping only host1 (172.16.1.210) and only host1 can ping
>> the engine.
>>
>> As far as my network knowledge goes, to make the engine available from
>> the outside of host1 I would need to use a third nic or to use some device
>> to associate the ip and MAC address of the engine’s nic.
>>
> Ciao Matteo,
> no, hosted-engine-setup should create a bridge for you.
> No need to do custom configuration to expose your VMs.
>
> Are you trying on bare metal or on VMs with the engine VM as a nested VM?
>

Ciao Simone,

thank you for your answer.

My lab is a nested environmet. I installed ovirt on bare metal with the
engine on another machine. On this setup i have 6 VMs:

- 172.16.1.1  pfSense as firewall/gateway
- 172.16.1.10  a windows 2016 used as network guest
- 172.16.1.12  a nethserver installation as DNS server ( also on
172.16.2.12 )
- the three ovirt-nodes as i described on my e-mail

All the machines are pingable, only the engine inside host 1 is unreachable
and can ping only host1.


Cheers

Matteo


>
>> I’ve looked around over the internet for a solution but every how-to I’ve
>> found follows the same steps of Jason’s.  I’ve also already asked for
>> help to Jason.
>>
>> Anyone could help me to solve this issue?
>>
>>
>>
>> Thank you
>>
>>
>>
>> Matteo
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Self-Hosted engine 4.1.7 unavailable from the outside of the host

[Matteo Capuano]

Hi everyone, my name’s Matteo and I’m a new oVirt user.

I’m trying to install the gluster hyperconverged solution in a lab
environment following the How-To wrote by Jason Brooks:

https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/

Sadly, I cannot understand how to configure the network on the self-hosted
engine and I’m unable to make it available from outside the host.

As written in the HowTo I created three hosts (ovirt-note 4.1.7) each one
with two nics, one for gluster and one for management, the network is a
static LAN with FQDN resolvable (also reverse) by a local DNS. Here the
details:

Gateway: 172.16.1.1

DNS: 172.16.1.12

Host1: 172.16.1.210 (management) – 172.16.2.210 (gluster)

Host2: 172.16.1.220 (management) – 172.16.2.220 (gluster)

Host3: 172.16.1.230 (management) – 172.16.2.230 (gluster)

Engine: 172.16.1.200

When installing the engine I choose to brigde the management’s nic
(172.16.1.210) of host1 but, once the installation is completed, I'm unable
to reach the engine from the LAN where the hosts are connected. The engine
(172.16.1.200) can ping only host1 (172.16.1.210) and only host1 can ping
the engine.

As far as my network knowledge goes, to make the engine available from the
outside of host1 I would need to use a third nic or to use some device to
associate the ip and MAC address of the engine’s nic.

I’ve looked around over the internet for a solution but every how-to I’ve
found follows the same steps of Jason’s.  I’ve also already asked for help
to Jason.

Anyone could help me to solve this issue?



Thank you



Matteo
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users