On Tue, Jan 29, 2019 at 5:01 PM Brian Wilson wrote:
> This seems to work however still trying to solve the issue of if we dont
> give access to networks at a higher level (Cluster or DC) then it must be
> given at the Network level for every network that we would like them to
> have access to.
On Wed, Dec 12, 2018 at 5:27 PM Brian Wilson wrote:
> Is there a way to prevent Roles Assigned to Groups on Objects to only
> apply to where it is set?
>
>
> Basically looking for a way to do what we had done in VMWare which
> involved using the do not propagate permission setting.
>
>
> be able
Hi,
The Katello 3.x api is not backward compatible with Katello 2.1 api,
therefore it will not be supported until ovirt-engine-3.6.8.
Patches to support it were merged today [1].
Supporting Katello 3.0 was merged to the ovirt-engine master version last
week and it should be available in the night
Hi Jose,
The correct way to do it is by:
1. Putting all hosts in maintenance mode
2. Changing the cluster cpu type to the desired one
3. Install the new host
4. Activate the hosts
5. Re-run the vms
On Fri, Feb 5, 2016 at 2:24 PM, wrote:
> Hi,
> I'm trying to add a new old host (Intel(R) Xeon
Hi Will,
The engine relies on the status reported by VDSM for the management network
'ovirtmgmt' and for its underlying nics/vlans.
In order to see the configuration of 'ovirtmgmt' network please paste the
output of the following command to be executed on the host:
vdsClient -s 0 getVdsCaps
In a
The 'Network Provider' left tab should appear also on "Install Host" dialog.
So if you move the host to 'Maintenance' mode and click on the "Install"
button, the dialog
should have the 'Network Provider' left tab.
On Sat, Aug 15, 2015 at 7:46 PM, Alan Murrell wrote:
> On 15/08/2015 8:45 AM, Carl
- Original Message -
> From: "Nathanaël Blanchet"
> To: masa...@redhat.com
> Cc: users@ovirt.org
> Sent: Wednesday, June 3, 2015 9:38:57 AM
> Subject: Katello integration
>
> Hello i read your wiki page about katello but i can't see thé projection as a
> target on the Google sheet
> htt
- Original Message -
> From: "Jorick Astrego"
> To: users@ovirt.org
> Sent: Wednesday, April 29, 2015 6:32:29 PM
> Subject: [ovirt-users] removing neutron networks
>
> Hi,
>
> After my update to 3.5.2 final, I started messing about with the Neutron
> integration again.
>
> I created a
- Original Message -
> From: "Vered Volansky"
> To: "Punit Dambiwal"
> Cc: users@ovirt.org
> Sent: Monday, March 2, 2015 7:20:08 AM
> Subject: Re: [ovirt-users] VM failed to start | Bad volume specification
>
>
>
> - Original Message -
> > From: "Punit Dambiwal"
> > To: "Ver
- Original Message -
> From: "Massimo Mad"
> To: users@ovirt.org
> Sent: Wednesday, February 25, 2015 11:14:28 AM
> Subject: [ovirt-users] oVirt Manager problem
>
> Hi,
> Here is the result of the command actually tables " audit_log " are very
> large .
> What can I do to prevent the fi
- Original Message -
> From: "Lior Vernia"
> To: "Martin Mucha"
> Cc: de...@ovirt.org, Users@ovirt.org, "Moti Asayag" ,
> "Juan Antonio Hernandez Fernandez"
>
> Sent: Monday, February 2, 2015 3:19:13 PM
> Subject: Re
- Original Message -
> From: "Arman Khalatyan"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Tuesday, December 30, 2014 2:21:26 PM
> Subject: Re: [ovirt-users] Unable to reinstall hosts after network removal.
>
> Ok I found the conflict
- Original Message -
> From: "Arman Khalatyan"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Monday, December 29, 2014 3:59:46 PM
> Subject: Re: [ovirt-users] Unable to reinstall hosts after network removal.
>
> My setup has 3 networ
- Original Message -
> From: "Arman Khalatyan"
> To: "users"
> Sent: Wednesday, December 24, 2014 1:22:43 PM
> Subject: [ovirt-users] Unable to reinstall hosts after network removal.
>
> Hello,
> I have a little trouble with ovirt 3.5 on CentOS6.6:
> I was removing all networks from al
)
> Authentication error: Unable to respond to any of these challenges:
> {keystone=Www-Authenticate: Keystone uri="http://10.1.2.3:35357"}
>
>
>
>
>
> From: Andrew Brimer
> Sent: Monday, December 15, 2014 3:02 PM
> To: Moti Asayag (masa...@redhat.com)
> Cc: users@ovi
- Original Message -
> From: "Andrew Brimer"
> To: masa...@redhat.com
> Cc: users@ovirt.org
> Sent: Monday, December 15, 2014 10:02:27 PM
> Subject: oVirt Neutron integration question
>
> Hi Moti,
>
>
>
> I am progressing from the Neutron appliance to Neutron on bare metal and
> hav
- Original Message -
> From: "Juan Hernández"
> To: "Moti Asayag" , "Andrew Brimer"
> Cc: users@ovirt.org
> Sent: Thursday, December 11, 2014 11:23:37 AM
> Subject: Re: [ovirt-users] Questions regarding neutron implementation for
> oV
- Original Message -
> From: "Andrew Brimer"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Thursday, December 11, 2014 1:04:46 AM
> Subject: RE: Questions regarding neutron implementation for oVirt 3.5
>
> Hi Modi,
>
> In the di
- Original Message -
> From: "Andrew Brimer"
> To: "Moti Asayag"
> Sent: Wednesday, December 10, 2014 5:55:31 PM
> Subject: RE: Questions regarding neutron implementation for oVirt 3.5
>
> Hi Moti,
>
> Yes. I did not consider sending thi
- Original Message -
> From: "Jürgen Brandl"
> To: users@ovirt.org
> Sent: Saturday, November 15, 2014 2:10:20 AM
> Subject: [ovirt-users] Network rules
>
> Hello,
>
> I'm new, so forgive me if this is stupid or in the wrong place.
>
> Because of security reasons, I want a network, wh
- Original Message -
> From: "Ludek Finstrle"
> To: users@ovirt.org
> Sent: Wednesday, October 29, 2014 4:11:36 PM
> Subject: [ovirt-users] Change default gateway
>
>
> Hi,
>
> I have ovirt 3.5 with hosted engine.
> I'm running it on 2 physical hosts (for management + storage) directl
- Original Message -
> From: "Xavier Naveira"
> To: users@ovirt.org
> Sent: Monday, October 27, 2014 10:42:47 AM
> Subject: [ovirt-users] MacPoolRanges not working as expected
>
> Hi everyone,
>
> First of all I'd like to say that we have been using oVirt successfully
> for more than a
Hi Phil,
See answers/questions inline.
- Original Message -
> From: "Phil Daws"
> To: "users"
> Sent: Tuesday, October 21, 2014 6:05:55 PM
> Subject: Re: [ovirt-users] oVirt 3.5 & Neutron (Will this work?)
>
> Hmmm, this is interesting as it would appear you can only use the Neutron
>
- Original Message -
> From: "黄川"
> To: users@ovirt.org
> Sent: Saturday, October 11, 2014 10:09:01 AM
> Subject: [ovirt-users] OSD integration problem
>
> Hi,all
> I use oVirt 3.4.4 . I want integrate the OSN int oVirt.I had some problems.
> For example, I imported a network named 'pri
- Original Message -
> From: "Vladimir Pakhomov"
> To: users@ovirt.org
> Sent: Sunday, October 5, 2014 1:26:12 PM
> Subject: [ovirt-users] using ovirt-shell to attach defind network to hosts
>
> Hi,
>
> I would like to implement a script that would attach a newly created network
> to all
- Original Message -
> From: "Robert Story"
> To: "users"
> Sent: Thursday, September 18, 2014 6:26:20 PM
> Subject: [ovirt-users] NeutronVirtualAppliance and 3.4?
>
> Can the Neutron appliance for 3.5 be used with 3.4? Or does it depend on
> features only in 3.5?
>
I haven't tested
- Original Message -
> From: "Antoni Segura Puimedon"
> To: "Shanil S"
> Cc: users@ovirt.org
> Sent: Tuesday, September 16, 2014 1:28:51 PM
> Subject: Re: [ovirt-users] Multiple ips to a single nic
>
>
>
> - Original Message -
> > From: "Shanil S"
> > To: users@ovirt.org, "J
- Original Message -
> From: "Moti Asayag"
> To: "Nicolas Ecarnot"
> Cc: "Martin Mucha" , users@ovirt.org
> Sent: Thursday, September 11, 2014 9:18:03 AM
> Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs?
>
>
&
- Original Message -
> From: "Nicolas Ecarnot"
> To: "Martin Mucha"
> Cc: users@ovirt.org
> Sent: Wednesday, September 10, 2014 3:44:33 PM
> Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs?
>
> Le 10/09/2014 13:36, Martin Mucha a écrit :
> > just to add one more commen
- Original Message -
> From: "Yuriy Demchenko"
> To: users@ovirt.org
> Sent: Friday, September 5, 2014 11:25:17 AM
> Subject: [ovirt-users] [hosted-engine] cluster network setup deadlock
>
> Hi,
>
> i'm testing hosted-engine in my lab and have some issues doing network
> configuration
- Original Message -
> From: "Shanil S"
> To: users@ovirt.org
> Sent: Thursday, August 28, 2014 11:31:30 AM
> Subject: [ovirt-users] Unable to assign profile to the nic
>
> Hi All,
>
> I am unable to assign the profile using the ovirt api code, the following xml
> code is used for crea
- Original Message -
> From: "Jan Kappert"
> To: users@ovirt.org
> Sent: Thursday, August 21, 2014 9:40:37 PM
> Subject: Re: [ovirt-users] Neutron Virtual Appliance in oVirt-engine feature
>
> Hello,
>
> I have try'd today multiple installations in my test env. Ovirt 3.5.0
> i have one
Hi All,
I'd like to introduce the Neutron virtual appliance feature [1] in ovirt-engine
3.5.
The appliance is provided by the oVirt-image-repository which is configured by
default
in ovirt-engine installation.
By using the appliance, the admin can skip the pain in installing and
configuring Op
- Original Message -
> From: "Chandrahasa S"
> To: users@ovirt.org
> Sent: Wednesday, August 6, 2014 12:14:16 PM
> Subject: [ovirt-users] Not able to set Hostname for guest OS from cloud init
> using API
>
> Dear All,
>
> We are not able Set Hostname to guest OS through API using clo
alidated
Bug 1124887 - [RFE][oVirt][Foreman] Improve error messages when action fails on
foreman server
In addition I've updated the feature page which missed a required package to be
installed
on the foreman server.
Regards,
Moti
- Forwarded Message -
From: "Moti Asayag"
- Original Message -
> From: "Dan Kenigsberg"
> To: "Maurice James" , from...@redhat.com
> Cc: "Moti Asayag" , "users" , "Antoni
> Segura Puimedon"
> Sent: Monday, July 21, 2014 6:49:56 PM
> Subject: Re: [ovirt-users]
- Original Message -
> From: "Maurice James"
> To: "users"
> Sent: Wednesday, July 16, 2014 5:06:23 PM
> Subject: [ovirt-users] Logical network error
>
> While attempting to remove a logical network from one of my hosts, Im getting
> the following error.
> Error while executing action
- Original Message -
> From: "Udaya Kiran P"
> To: "users"
> Sent: Tuesday, July 15, 2014 1:22:15 PM
> Subject: [ovirt-users] Neutron - oVirt Integration
>
> Hi All,
>
> I am working on the Nova - oVirt driver as mentioned in the blueprint -
> https://blueprints.launchpad.net/nova/+sp
- Original Message -
> From: "Daniel Helgenberger"
> To: users@ovirt.org
> Sent: Friday, July 11, 2014 1:20:14 PM
> Subject: [ovirt-users] Add OpenStack-Glance
>
> Hello,
>
> following Itamar Heim's idea to use Glance for moving around images in
> Ovirt, I went ahead setting up a VM wi
- Original Message -
> From: "Shahar Havivi"
> To: "Antoni Segura Puimedon"
> Cc: Users@ovirt.org
> Sent: Sunday, June 29, 2014 11:12:24 AM
> Subject: Re: [ovirt-users] name of virtual machine and hostname
>
> On 27.06.14 05:18, Antoni Segura Puimedon wrote:
> >
> >
> > - Origina
- Original Message -
> From: "Itamar Heim"
> To: "Moti Asayag"
> Cc: "Sandro Bonazzola" , "users" ,
> de...@ovirt.org
> Sent: Monday, June 23, 2014 3:24:06 PM
> Subject: Re: [ovirt-users] Host Installation fails - Package
&g
- Original Message -
> From: "Itamar Heim"
> To: "Moti Asayag" , "Sandro Bonazzola"
>
> Cc: "users" , de...@ovirt.org
> Sent: Monday, June 23, 2014 12:06:57 PM
> Subject: Re: [ovirt-users] Host Installation fails - Package
&g
- Original Message -
> From: "Sandro Bonazzola"
> To: "Moti Asayag"
> Cc: "users" , de...@ovirt.org
> Sent: Tuesday, June 17, 2014 10:25:16 AM
> Subject: Re: [ovirt-users] Host Installation fails - Package
> openstack-neutron cannot b
- Original Message -
> From: "Alon Bar-Lev"
> To: "Moti Asayag"
> Cc: "Jiří Sléžka" , users@ovirt.org
> Sent: Friday, June 20, 2014 1:19:25 AM
> Subject: Re: [ovirt-users] host upgrade from ovirt manager and custom
> iptables rules
- Original Message -
> From: "Jiří Sléžka"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Thursday, June 19, 2014 3:25:49 PM
> Subject: Re: [ovirt-users] host upgrade from ovirt manager and custom
> iptables rules
>
> > -
- Original Message -
> From: "Jiří Sléžka"
> To: users@ovirt.org
> Sent: Wednesday, June 18, 2014 8:12:09 PM
> Subject: [ovirt-users] host upgrade from ovirt manager and custom iptables
> rules
>
> Hello all,
>
> is there any way to make custom iptables rules persistent during host
- Original Message -
> From: "Udaya Kiran P"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Tuesday, June 17, 2014 2:51:26 PM
> Subject: Re: [ovirt-users] Nova- oVirt Driver : Adding NIC to VM
>
> Hi Moti,
>
> Few more thoughts.
- Original Message -
> From: "Udaya Kiran P"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Tuesday, June 17, 2014 12:37:23 PM
> Subject: Re: [ovirt-users] Nova- oVirt Driver : Adding NIC to VM
>
> Hi Moti,
>
> ThankYou for your
- Original Message -
> From: "Udaya Kiran P"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Tuesday, June 17, 2014 8:46:19 AM
> Subject: Re: [ovirt-users] Nova- oVirt Driver : Adding NIC to VM
>
> Hi Moti,
>
> Sorry for the del
- Original Message -
> From: "Udaya Kiran P"
> To: "users"
> Sent: Wednesday, June 11, 2014 10:25:37 AM
> Subject: [ovirt-users] Host Installation fails - Package openstack-neutron
> cannot be found
>
> Hi All,
>
> I am trying to add a new Host, with External Network Provider - Ne
- Original Message -
> From: "Gianluca Cecchi"
> To: "Livnat Peer"
> Cc: users@ovirt.org
> Sent: Thursday, June 5, 2014 11:34:11 AM
> Subject: Re: [ovirt-users] Firewall?
>
> On Thu, Jun 5, 2014 at 10:02 AM, Livnat Peer < lp...@redhat.com > wrote:
>
>
>
> [snip]
>
>
>
>
> The se
- Original Message -
> From: "Udaya Kiran P"
> To: "users"
> Sent: Wednesday, May 28, 2014 2:46:00 PM
> Subject: [ovirt-users] Nova- oVirt Driver : Adding NIC to VM
>
> Hi All,
>
> I am working on Nova - oVirt driver. I was able to test the VM life cycle
> successfully - spawn, suspen
- Original Message -
> From: "Martin Mucha"
> To: "Moti Asayag"
> Cc: "Yevgeny Zaspitsky" , users@ovirt.org,
> de...@ovirt.org
> Sent: Monday, April 28, 2014 9:38:11 AM
> Subject: Re: [ovirt-devel] Feature Page: Mac Pool per DC
>
- Original Message -
> From: "Martin Mucha"
> To: "Yevgeny Zaspitsky"
> Cc: users@ovirt.org, de...@ovirt.org
> Sent: Monday, April 28, 2014 9:14:38 AM
> Subject: Re: [ovirt-devel] Feature Page: Mac Pool per DC
>
> Hi,
> you're right, I do know about these problems. THIS IS DEFINITELY N
Regarding the UI mockup, I'd suggest having a checkbox next to the mac ranges,
when the data center has no range (meaning the global in use) the checkbox is
unchecked and the value of that text box will show the global ranges, disabled.
In order to specify a specific range, the user will have to c
- Original Message -
> From: "Martin Mucha"
> To: "Itamar Heim"
> Cc: users@ovirt.org, de...@ovirt.org
> Sent: Thursday, April 24, 2014 12:58:37 PM
> Subject: Re: [ovirt-devel] [ovirt-users] Feature Page: Mac Pool per DC
>
> >no. you don't change mac addresses on the fly.
> ok, I was j
- Original Message -
> From: "squadra"
> To: users@ovirt.org
> Sent: Thursday, April 24, 2014 10:08:55 AM
> Subject: [ovirt-users] Network Security / Seperation
>
> Hi Folks,
>
> i am currently looking for a way to isolate each vms network traffic
> so none can sniff others network tra
- Original Message -
> From: "Tamer Lima"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Thursday, April 24, 2014 7:51:39 PM
> Subject: Re: [ovirt-users] does SPM can run over ovirt-engine host ?
>
> Hi,
> this is the piece of code of e
- Original Message -
> From: "Tamer Lima"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Thursday, April 24, 2014 8:04:51 PM
> Subject: Re: [ovirt-users] does SPM can run over ovirt-engine host ?
>
> I created link with an image showing net
- Original Message -
> From: "Tamer Lima"
> To: users@ovirt.org
> Sent: Monday, April 14, 2014 5:13:12 PM
> Subject: [ovirt-users] does SPM can run over ovirt-engine host ?
>
>
> Hello,
>
> When I create virtual machine from a template (centos6.5, 2 cores, 8GB mem,
> 500GB hd) this pr
x27;static' red button and fill the above ip address
details.
If connectivity restored and action succeeded, make sure to click on the 'save
network
configuration' to persist the network changes to the host.
- Original Message -
> From: "Jeremiah Jahn"
> To:
- Original Message -
> From: "Jeremiah Jahn"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Sunday, April 6, 2014 12:00:16 AM
> Subject: Re: [Users] how do you manually add ovirtmgmt network to a node/host
>
> Looks like the superlog show
- Original Message -
> From: "Jeremiah Jahn"
> To: users@ovirt.org
> Sent: Friday, April 4, 2014 4:03:07 PM
> Subject: [Users] how do you manually add ovirtmgmt network to a node/host
>
> Trying to install ovirt node on an already existing kvm host. Used
> the "New" wizard from the eng
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag" , "users@oVirt.org"
> Sent: Monday, March 17, 2014 1:05:21 PM
> Subject: Attach floppy as [sysprep] to VM - API
>
> Hi,
>
> I want to attach floppy as [sysprep] to window
- Original Message -
> From: "aditya mamidwar"
> To: users@ovirt.org, engine-de...@ovirt.org
> Sent: Friday, March 14, 2014 5:09:49 PM
> Subject: [Users] Source code unerstanding
>
>
> Hey,
>
> is there a simpler way to know which code is responsible for which module of
> the engine.
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Tuesday, March 11, 2014 8:53:15 AM
> Subject: Re: Delete & Detach Logical Network
>
> Managed to delete network which is attached to
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Tuesday, March 11, 2014 3:18:37 AM
> Subject: Re: Delete & Detach Logical Network
>
> I tried below code, but still it is no
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag" , "users@oVirt.org"
> Sent: Monday, March 10, 2014 1:22:08 PM
> Subject: Delete & Detach Logical Network
>
> Hi,
>
> I'm able to delete the logical network but t
- Original Message -
> From: "Sandro Bonazzola"
> To: "Moti Asayag" , "users@oVirt.org"
> Cc: "Doron Fediuck"
> Sent: Friday, March 7, 2014 9:15:50 AM
> Subject: Re: [ovirt test day 3] Documentation - man pages result
&
Hi,
In the third ovirt test day I reviewed the manuals of a various
ovirt tools and commands:
Here are my findings (haven't reported any bugs for them):
The engine-backup and engine-upgrade-check has no man pages,
however help is available by providing the --help argument:
No manual entry for e
- Original Message -
> From: "Tejesh M"
> To: "users@oVirt.org" , "Moti Asayag"
> Sent: Wednesday, March 5, 2014 1:01:18 PM
> Subject: Clone a Template using API
>
> Hi,
>
> While creating VM from Template via Web Admin portal, th
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Monday, March 3, 2014 4:36:32 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> Ok got it..
> I just observed that my se
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Monday, March 3, 2014 3:46:14 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> Thanks, I'm able to create logical
;e8:39:35:2b:3c:26', 'cfg': {}, 'ipv6addrs': ['fe80::ea39:35ff:fe2b:3c26/64'],
'speed': 5000, 'mtu': '1500'}
IIRC this issue is already reported and can be solved by creating the ifcfg-em1
on the host.
Toni, could you confirm ?
- Or
> - Original Message -
> > From: "Udaya Kiran P"
> > To: "users" , "Alon Bar-Lev"
> > Sent: Monday, March 3, 2014 8:55:23 AM
> > Subject: Adding FC19 Host to oVirt Engine 3.3.3-2.fc19 - Failed to
> > configure management network on the host
> >
> > Hi All,
> >
> > I am trying to add FC1
- Original Message -
> From: "Jonas Israelsson"
> To: users@ovirt.org
> Sent: Saturday, March 1, 2014 3:28:15 PM
> Subject: [Users] oVirt 3.4 - MTU Override not honoured by virtual NICs
>
> I have a SAN Network defined in oVirt where I have enabled Jumbo frames
> (by setting the MTU to
- Original Message -
> From: "Udaya Kiran P"
> To: "Moti Asayag" , "Alon Bar-Lev"
> Cc: "users"
> Sent: Wednesday, February 26, 2014 12:46:31 PM
> Subject: Re: [Users] Fedora 19 Host Installation Failed - VDSM version
- Original Message -
> From: "Alon Bar-Lev"
> To: "Udaya Kiran P" , "Moti Asayag"
> Cc: fabi...@redhat.com, "users"
> Sent: Wednesday, February 26, 2014 12:08:43 PM
> Subject: Re: Fedora 19 Host Installation Failed - VDSM
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Monday, February 24, 2014 1:18:53 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> The example updates the existing Netwo
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Monday, February 24, 2014 1:18:53 PM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> The example updates the existing Netwo
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Monday, February 24, 2014 11:59:42 AM
> Subject: Re: [Users] Creating Logical Network issue - API
>
> While setting Logical Network, it
h
- Original Message -
> From: "Tejesh M"
> To: "users@oVirt.org"
> Sent: Thursday, February 20, 2014 11:48:56 AM
> Subject: [Users] Creating Logical Network issue - API
>
> Hi ,
>
> I'm trying to create Logical Network and assign it to cluster & want to bond
> this to one of the Netwo
- Original Message -
> From: "Tejesh M"
> To: "users@oVirt.org"
> Sent: Thursday, February 20, 2014 11:48:56 AM
> Subject: [Users] Creating Logical Network issue - API
>
> Hi ,
>
> I'm trying to create Logical Network and assign it to cluster & want to bond
> this to one of the Networ
- Original Message -
> From: "Tejesh M"
> To: "Moti Asayag"
> Cc: "users@oVirt.org"
> Sent: Thursday, February 20, 2014 8:52:52 AM
> Subject: Re: [Users] Fwd: Sample code for setting NIC - CloudInit
>
> I'm not gettin
- Original Message -
> From: "Tejesh M"
> To: "users@oVirt.org"
> Sent: Wednesday, February 19, 2014 3:24:40 PM
> Subject: [Users] Fwd: Sample code for setting NIC - CloudInit
>
> Hi,
>
> Can someone share me sample java code for assigning IP address for VM on eth0
> through Java SDK
- Original Message -
> From: "Brian Proffitt"
> To: users@ovirt.org
> Cc: redhat-proj...@bitergia.com
> Sent: Wednesday, February 12, 2014 10:12:20 PM
> Subject: [Users] New oVirt Community Dashboard
>
> With much pleasure, I would like to introduce a new tool for the oVirt
> community:
Hi,
In the 3.4 ovirt-test-day-2 I've tested the all-in-one feature.
I installed the all-in-one setup on a vm.
The installation ended almost successfully, except of the vdsm service,
where the the host didn't become operational due to lack of support
in clusterLevel >= 3.4:
Feb 11 15:51:52 localh
- Original Message -
> From: "Satya Vempati"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Tuesday, February 11, 2014 12:45:36 AM
> Subject: Re: [Users] Adding a VMNIC via the REST api returns no error, but
> the NIC isn't added
>
&
- Original Message -
> From: "Itamar Heim"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Sunday, February 9, 2014 11:57:08 PM
> Subject: Re: [Users] Adding a VMNIC via the REST api returns no error, but
> the NIC isn't added
>
- Original Message -
> From: "Satya Vempati"
> To: "Moti Asayag"
> Cc: users@ovirt.org
> Sent: Sunday, February 9, 2014 7:42:07 PM
> Subject: Re: [Users] Adding a VMNIC via the REST api returns no error, but
> the NIC isn't added
>
> T
- Original Message -
> From: "Satya Vempati"
> To: users@ovirt.org
> Sent: Sunday, February 9, 2014 5:54:15 AM
> Subject: [Users] Adding a VMNIC via the REST api returns no error, but the
> NIC isn't added
>
> POST /api/vms/670fa876-a18d-436c-b999-1dc7cbbd5bcf/nics
>
>
> eth0
>
> rhev
- Original Message -
> From: "Doron Fediuck"
> To: "Moti Asayag"
> Cc: "users"
> Sent: Monday, February 3, 2014 1:07:37 PM
> Subject: Re: [Users] ovirt test day: HA VM Reservation feature test summary
>
>
>
> - Origi
- Original Message -
> From: "Frank Wall"
> To: users@ovirt.org
> Sent: Tuesday, January 28, 2014 1:31:41 AM
> Subject: [Users] Setup Networks: Unexpected exception
>
> Hi,
>
> still testing 3.4 and I'm unable to save a node's
> network configuration in webadmin:
>
> Error while execut
Hi Federico,
- Original Message -
> From: "Federico Alberto Sayd"
> To: users@ovirt.org
> Sent: Thursday, January 23, 2014 4:56:22 PM
> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not
> properly configured"
>
> On 22/01/14 21:31, Dan Kenigsberg wrote:
> > On Wed,
Hi All,
In the latest ovirt-test-day i've tested the HA VM resource reservation
feature [1] according to the basic scenarios as described on [2].
The new feature notifies the admin via an event log about his cluster
inability to preserve resources for HA VMs. I've reported 2 bugs based
on the beh
- Original Message -
> From: "Federico Alberto Sayd"
> To: users@ovirt.org
> Sent: Friday, January 24, 2014 4:06:11 PM
> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not
> properly configured"
>
> On 24/01/14 08:31,
- Original Message -
> From: "Federico Alberto Sayd"
> To: users@ovirt.org
> Sent: Thursday, January 23, 2014 3:57:53 PM
> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not
> properly configured"
>
> On 23/01/14 07:02,
- Original Message -
> From: "Itamar Heim"
> To: "Yedidyah Bar David" , "Joop"
> Cc: "users" , "Moti Asayag" , "Lior
> Vernia"
> Sent: Thursday, January 23, 2014 6:45:11 PM
> Subject: Re: [Users] [SOLVED] &
- Original Message -
> From: "Federico Sayd"
> To: users@ovirt.org
> Sent: Wednesday, January 22, 2014 2:22:01 AM
> Subject: [Users] Centos 6.5 and bonding: "A slave interface is not properly
> configured"
>
> Hello:
>
> I am having problems with bonding
>
> I have installed Centos
There is an open bug in regards to configuring the management
network on top of a vlan:
https://bugzilla.redhat.com/show_bug.cgi?id=906359
The system stability might get worse due to the new feature
"multi host network configuration" which applies logical network
changes to the entire DC's hosts.
1 - 100 of 145 matches
Mail list logo