----- Original Message ----- > From: "Federico Sayd" <[email protected]> > To: [email protected] > Sent: Wednesday, January 22, 2014 2:22:01 AM > Subject: [Users] Centos 6.5 and bonding: "A slave interface is not properly > configured" > > Hello: > > I am having problems with bonding > > I have installed Centos 6.5 in order to use it as host. I configured eth0 > with the vlan of the management network (Vlan 70). Then I registered the > host to the engine (3.3.2-1-el6) and the engine installed oVirt in the host > without problem. Ovirtmgmt was created automatically and bridged with > eth0.70. > > Now I need to bond a second network interface (eth1) with eth0. But when I > try to bond the nics, I get the next error: >
Could you describe how you've created the bond ? via webadmin setup networks dialog or via api ? > "A slave interface is not properly configured. Please verify slaves do not > contain any of the following properties: network name, boot protocol, IP > address, netmask, gateway or vlan-ID notation (as part of interface's name > or explicitly)" > > I delete any unnecessary parameters from ifcfg-eth0 and ifcfg-eth1. > > This is my network config: > > ifcfg-eth0: > DEVICE=eth0 > TYPE=Ethernet > ONBOOT=yes > > ifcfg-eth1: > DEVIC E=eth1 > TYPE=Ethernet > ONBOOT=yes > > ifcfg-eth0.70: > # Generated by VDSM version 4.13.2-1.el6 > DEVICE=eth0.70 > ONBOOT=yes > VLAN=yes > BRIDGE=ovirtmgmt > NM_CONTROLLED=no > STP=no > > ifcfg-ovirtmgmt: > # Generated by VDSM version 4.13.2-1.el6 > DEVICE=ovirtmgmt > ONBOOT=yes > TYPE=Bridge > DELAY=0 > IPADDR=192.168.1.101 > NETMASK=255.255.255.0 > BOOTPROTO=none > DEFROUTE=yes > NM_CONTROLLED=no > STP=no > > No others ifcfg-* files. > > I don't see the parameters that oVirt doesn't like. Any clue, workaround, bug > report....? > > Thanks! > > Federico > > PD: Sorry for my basic english > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
