[ovirt-users] Re: VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
HI All:
Even I managed to change the VIrtIO to VirtIO-SCSI in FreeBSD I still
got the error occasionally below
Aug 7 15:52:32 MX1 kernel: vtscsi0: bus reset disabled
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 a7 62 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 a4 a2 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 a3 22 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 a2 62 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 9e 22 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
.
.
.
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): WRITE(10). CDB: 2a 00
02 80 9e 22 00 00 40 00
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): CAM status: Command timeout
Aug 7 15:52:32 MX1 kernel: (da0:vtscsi0:0:0:0): Retrying command
another bad thing is the "VMs intermittently go into not responding" bug
is come back *Bug 1449967*
<https://bugzilla.redhat.com/show_bug.cgi?id=1449967>, It is mostly
occuring in the midnight daily cronjob time 03:XX
BR,
Paul.LKW
Karli Sjöberg 於 5/8/2018 19:59 寫道:
On Aug 5, 2018 13:57, "Paul.LKW" wrote:
HI K.
Not yet but will report this later time tonight, I am trying to
see does it possible to change the FreeBSD VM's harddisk to
VirtIO-SCSI to make the VMs work first.
Sounds good! Good luck with it!
/K
Karli Sjöberg 於 5/8/2018 19:53 寫道:
On Aug 5, 2018 13:52, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
Hi Karli:
It is FreeBSD 10.4 in production and Testing for 11.1 also
have such issue.
Thanks!
Have you reported this issue, either to FreeBSD's bugzilla or
oVirt's, or both?
/K
Karli Sjöberg 於 5/8/2018 19:50 寫道:
On Aug 5, 2018 13:48, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
HI Karli:
It is oVirt-4.2.5.2-1.el7
Yeah, I know that, but what version of _FreeBSD_ are
you using? :)
/K
Karli Sjöberg 於 5/8/2018 19:03 寫道:
On Aug 5, 2018 12:39, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
Dear All:
I just upgraded my oVIrt-4.2.4 to 4.2.5
and nightmare begin, FreeBSD VMs
hangs once the VM's VirtIO harddisk is
some loading (eg. extracting a
big tar ball, portsnap extract, etc.), I
tried to create a VMs using
back the IDE do not has any problem but
got slow IO performance once
using VirtIO it will hang as it like.
I also tried to create another VMs with
VirtIO-SCSI it seems the hang
problem no occur but I got the oVirt-Host
loading over 40 when VM
harddisk have some little job, so
conclusion is if you guys will using
FreeBSD as guest please do not upgrade at
the moment.
In fact I feel every time the new version
always have problem and
causing user to nightmare.
BR,
Paul.LKW
___
Users mailing list -- users@ovirt.org
<mailto:users@ovirt.org>
To unsubscribe send an email to
users-le...@ovirt.org
<mailto:users-le...@ovirt.org>
Privacy Statement:
https:
[ovirt-users] Re: VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
HI K.
Not yet but will report this later time tonight, I am trying to see does
it possible to change the FreeBSD VM's harddisk to VirtIO-SCSI to make
the VMs work first.
Karli Sjöberg 於 5/8/2018 19:53 寫道:
On Aug 5, 2018 13:52, "Paul.LKW" wrote:
Hi Karli:
It is FreeBSD 10.4 in production and Testing for 11.1 also have
such issue.
Thanks!
Have you reported this issue, either to FreeBSD's bugzilla or oVirt's,
or both?
/K
Karli Sjöberg 於 5/8/2018 19:50 寫道:
On Aug 5, 2018 13:48, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
HI Karli:
It is oVirt-4.2.5.2-1.el7
Yeah, I know that, but what version of _FreeBSD_ are you using? :)
/K
Karli Sjöberg 於 5/8/2018 19:03 寫道:
On Aug 5, 2018 12:39, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
Dear All:
I just upgraded my oVIrt-4.2.4 to 4.2.5 and
nightmare begin, FreeBSD VMs
hangs once the VM's VirtIO harddisk is some
loading (eg. extracting a
big tar ball, portsnap extract, etc.), I tried to
create a VMs using
back the IDE do not has any problem but got slow
IO performance once
using VirtIO it will hang as it like.
I also tried to create another VMs with
VirtIO-SCSI it seems the hang
problem no occur but I got the oVirt-Host loading
over 40 when VM
harddisk have some little job, so conclusion is if
you guys will using
FreeBSD as guest please do not upgrade at the moment.
In fact I feel every time the new version always
have problem and
causing user to nightmare.
BR,
Paul.LKW
___
Users mailing list -- users@ovirt.org
<mailto:users@ovirt.org>
To unsubscribe send an email to
users-le...@ovirt.org <mailto:users-le...@ovirt.org>
Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OL6XB5PLCWRXLT4H7X42KZJOMNVTMUBN/
Daem, thanks for the heads up! I was thinking about
updating but now I'll hold that off for sure!
What version FreeBSD are you using?
Is this issue reported?
/K
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DME6CA5WK3HHOW6EQMDI6OETQUC5BZMD/
[ovirt-users] Re: VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
Hi Karli:
It is FreeBSD 10.4 in production and Testing for 11.1 also have such issue.
Karli Sjöberg 於 5/8/2018 19:50 寫道:
On Aug 5, 2018 13:48, "Paul.LKW" wrote:
HI Karli:
It is oVirt-4.2.5.2-1.el7
Yeah, I know that, but what version of _FreeBSD_ are you using? :)
/K
Karli Sjöberg 於 5/8/2018 19:03 寫道:
On Aug 5, 2018 12:39, "Paul.LKW"
<mailto:paul@gmail.com> wrote:
Dear All:
I just upgraded my oVIrt-4.2.4 to 4.2.5 and nightmare
begin, FreeBSD VMs
hangs once the VM's VirtIO harddisk is some loading (eg.
extracting a
big tar ball, portsnap extract, etc.), I tried to create a
VMs using
back the IDE do not has any problem but got slow IO
performance once
using VirtIO it will hang as it like.
I also tried to create another VMs with VirtIO-SCSI it
seems the hang
problem no occur but I got the oVirt-Host loading over 40
when VM
harddisk have some little job, so conclusion is if you
guys will using
FreeBSD as guest please do not upgrade at the moment.
In fact I feel every time the new version always have
problem and
causing user to nightmare.
BR,
Paul.LKW
___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org
<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OL6XB5PLCWRXLT4H7X42KZJOMNVTMUBN/
Daem, thanks for the heads up! I was thinking about updating
but now I'll hold that off for sure!
What version FreeBSD are you using?
Is this issue reported?
/K
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3ASV6WEA7RZQSSSMB3VOQIX7QGCHGVCU/
[ovirt-users] Re: VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
HI Karli:
It is oVirt-4.2.5.2-1.el7
Karli Sjöberg 於 5/8/2018 19:03 寫道:
On Aug 5, 2018 12:39, "Paul.LKW" wrote:
Dear All:
I just upgraded my oVIrt-4.2.4 to 4.2.5 and nightmare begin,
FreeBSD VMs
hangs once the VM's VirtIO harddisk is some loading (eg. extracting a
big tar ball, portsnap extract, etc.), I tried to create a VMs using
back the IDE do not has any problem but got slow IO performance once
using VirtIO it will hang as it like.
I also tried to create another VMs with VirtIO-SCSI it seems the hang
problem no occur but I got the oVirt-Host loading over 40 when VM
harddisk have some little job, so conclusion is if you guys will
using
FreeBSD as guest please do not upgrade at the moment.
In fact I feel every time the new version always have problem and
causing user to nightmare.
BR,
Paul.LKW
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OL6XB5PLCWRXLT4H7X42KZJOMNVTMUBN/
Daem, thanks for the heads up! I was thinking about updating but now
I'll hold that off for sure!
What version FreeBSD are you using?
Is this issue reported?
/K
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/STLBW4UY6UFLMGZSMFUKGMMEQ4EPRHTD/
[ovirt-users] VirtIO in new upgraded 4.2.5 for FreeBSD is very poor (could not use)
Dear All: I just upgraded my oVIrt-4.2.4 to 4.2.5 and nightmare begin, FreeBSD VMs hangs once the VM's VirtIO harddisk is some loading (eg. extracting a big tar ball, portsnap extract, etc.), I tried to create a VMs using back the IDE do not has any problem but got slow IO performance once using VirtIO it will hang as it like. I also tried to create another VMs with VirtIO-SCSI it seems the hang problem no occur but I got the oVirt-Host loading over 40 when VM harddisk have some little job, so conclusion is if you guys will using FreeBSD as guest please do not upgrade at the moment. In fact I feel every time the new version always have problem and causing user to nightmare. BR, Paul.LKW ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OL6XB5PLCWRXLT4H7X42KZJOMNVTMUBN/
[ovirt-users] Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
Hi Karli / All:
I just have time to reinstall my testing box with CentOS-7 (7.5) and
installed oVIrt-4.2.3 on that host find all FreeBSD version worked fine
no matter it is Intel or AMD host.
SO I will upgrade my production host to 4.2.3 and hope all work fine.
BR,
Paul.LKW
Karli Sjöberg 於 31/5/2018 2:33 寫道:
Den 30 maj 2018 19:08 skrev "Paul.LKW" :
Hi Karli Sjöberg:
May be you still using oVirt-4.1 so no problem but I am sorry
could not agreed with "nothing wrong with oVirt", if nothing is
wrong why I use FreeBSD 10.3 installation CD could boot and even
finished the installation but not for FreeBSD 10.4 and 11.
Yeah, no, I worded that wrong, of course it is a regression. What I
meant was that something most likely has changed in how oVirt is
starting the VMs that is causing this. A good start would be for you
to compare the VM XML from 3.6 to what you have now, 4.2 was it? So
you can file a bug report to give the devs something to look at.
My hunch is that unfortunately not at alot of people run AMD clusters
which then don't get as much "love" as the other. Hopefully this'll
change to at least a 50/50 attention as AMD takes more shares of the
market, but it won't do any good for your old Gen 3 Opterons, so don't
hold your breath hoping for it to just fix itself, you'll have to
really push the devs to do something about it!
Good luck with it!
/K
As all my Host is AMD based, so no idea how to test further, May
be I will try to reinstall oVirt again to see does it work and
report again.
Remark: I could even migrate FreeBSD 10.2 and 10.3 to this
oVirt-4.2 but surely could not install new or migrate 10.4 or 11
Karli Sjöberg 於 30/5/2018 17:31 寫道:
Den 30 maj 2018 10:26 skrev "Paul.LKW"
<mailto:paul@gmail.com>:
Hi Karli Sjöberg
It is very upset as I am using even more older version 3.6
also could run higher version of FreeBSD, yesterday I just
tried install FreeBSD 11 in oVirt 3.6 is no problem but
newer version of oVirt not work !!!
Well, I am running 4.1 and can run both 10.4 and 11, so
there's nothing wrong with oVirt itself. Do you have an Intel
cluster you can test with?
/K
2018-05-30 12:16 GMT+08:00 Karli Sjöberg
mailto:ka...@inparadise.se>>:
Paul, "reply all" next time
Den 30 maj 2018 05:32 skrev "Paul.LKW"
mailto:paul@gmail.com>>:
Hi Karli Sjöberg/ Alexandr Krivulya
So the image says the virtual hardware is about the
same, except for Cluster type. I've had issues before
getting FreeBSD running in oVirt with Opteron. Since i
then had two clusters: one AMD and one Intel, I worked
around it by only using the Intel cluster for FreeBSD
guests.
I also tested booting FreeBSD ISO on the host metal
(old Sun Fire, maybe X4440, something like that), so
it should just be a oVirt/QEMU thing, but I never
tried fixing it.
/K
2018-05-30 2:06 GMT+08:00 Karli Sjöberg
mailto:ka...@inparadise.se>>:
On Wed, 2018-05-30 at 01:09 +0800, Paul.LKW wrote:
> Hi Alexandr Krivulya:
> Tried all configuration combination also
could not boot still hang on
> the screen captured !
I just tried it as well, works fine, no
problemo. My VM has:
1 vCPU
1GB vRAM
8GB vHDD
In a Nehalem cluster.
Alex, Paul, what´s yours?
/K
>
> Alexandr Krivulya 於 29/5/2018 22:57 寫道:
> > Hi!
> > I procced with default instalation of
10.4-amd64 from ISO and it
> > boots just fine. Can you provide some more
info about VM
> > configuration?
> >
> > 26.05.2018 20:59, Paul.LKW пишет:
> > > HI All:
> > > Any one have tried to boot up FreeBSD
10.4 successful? I tried
> > > 10.3 is all working fine but no lucky in
10.4 at all even boot
> > > from DVD !!!
[ovirt-users] Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
Hi Karli Sjöberg:
May be you still using oVirt-4.1 so no problem but I am sorry could not
agreed with "nothing wrong with oVirt", if nothing is wrong why I use
FreeBSD 10.3 installation CD could boot and even finished the
installation but not for FreeBSD 10.4 and 11.
As all my Host is AMD based, so no idea how to test further, May be I
will try to reinstall oVirt again to see does it work and report again.
Remark: I could even migrate FreeBSD 10.2 and 10.3 to this oVirt-4.2 but
surely could not install new or migrate 10.4 or 11
Karli Sjöberg 於 30/5/2018 17:31 寫道:
Den 30 maj 2018 10:26 skrev "Paul.LKW" :
Hi Karli Sjöberg
It is very upset as I am using even more older version 3.6 also
could run higher version of FreeBSD, yesterday I just tried
install FreeBSD 11 in oVirt 3.6 is no problem but newer version of
oVirt not work !!!
Well, I am running 4.1 and can run both 10.4 and 11, so there's
nothing wrong with oVirt itself. Do you have an Intel cluster you can
test with?
/K
2018-05-30 12:16 GMT+08:00 Karli Sjöberg mailto:ka...@inparadise.se>>:
Paul, "reply all" next time
Den 30 maj 2018 05:32 skrev "Paul.LKW" mailto:paul@gmail.com>>:
Hi Karli Sjöberg/ Alexandr Krivulya
So the image says the virtual hardware is about the same,
except for Cluster type. I've had issues before getting
FreeBSD running in oVirt with Opteron. Since i then had two
clusters: one AMD and one Intel, I worked around it by only
using the Intel cluster for FreeBSD guests.
I also tested booting FreeBSD ISO on the host metal (old Sun
Fire, maybe X4440, something like that), so it should just be
a oVirt/QEMU thing, but I never tried fixing it.
/K
2018-05-30 2:06 GMT+08:00 Karli Sjöberg
mailto:ka...@inparadise.se>>:
On Wed, 2018-05-30 at 01:09 +0800, Paul.LKW wrote:
> Hi Alexandr Krivulya:
> Tried all configuration combination also could not
boot still hang on
> the screen captured !
I just tried it as well, works fine, no problemo. My
VM has:
1 vCPU
1GB vRAM
8GB vHDD
In a Nehalem cluster.
Alex, Paul, what´s yours?
/K
>
> Alexandr Krivulya 於 29/5/2018 22:57 寫道:
> > Hi!
> > I procced with default instalation of 10.4-amd64
from ISO and it
> > boots just fine. Can you provide some more info
about VM
> > configuration?
> >
> > 26.05.2018 20:59, Paul.LKW пишет:
> > > HI All:
> > > Any one have tried to boot up FreeBSD 10.4
successful? I tried
> > > 10.3 is all working fine but no lucky in 10.4 at
all even boot
> > > from DVD !!!
> > > Attached is the freezes point.
> > >
> > >
> > >
> > > BR,
> > > Paul.LKW
> > >
> > >
> > > ___
> > > Users mailing list -- users@ovirt.org
<mailto:users@ovirt.org>
> > > To unsubscribe send an email to
users-le...@ovirt.org <mailto:users-le...@ovirt.org>
> >
> >
> > ___
> > Users mailing list -- users@ovirt.org
<mailto:users@ovirt.org>
> > To unsubscribe send an email to
users-le...@ovirt.org <mailto:users-le...@ovirt.org>
> > Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
> > oVirt Code of Conduct:
https://www.ovirt.org/community/about/commun
> > ity-guidelines/
> > List Archives:
https://lists.ovirt.org/archives/list/us...@ovirt.or
> > g/message/BCXCX5QMXL7SQUVBJMN3HFSQSS56VPJF/
>
> ___
> Users mailing list -- users@ovirt.org
<mailto:users@ovirt.org>
> To unsubscribe send an email to
users-le...@ovirt.org <mailto:users-le
[ovirt-users] Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
Hi Karli Sjöberg It is very upset as I am using even more older version 3.6 also could run higher version of FreeBSD, yesterday I just tried install FreeBSD 11 in oVirt 3.6 is no problem but newer version of oVirt not work !!! 2018-05-30 12:16 GMT+08:00 Karli Sjöberg : > Paul, "reply all" next time > > Den 30 maj 2018 05:32 skrev "Paul.LKW" : > > Hi Karli Sjöberg/ Alexandr Krivulya > > > So the image says the virtual hardware is about the same, except for > Cluster type. I've had issues before getting FreeBSD running in oVirt with > Opteron. Since i then had two clusters: one AMD and one Intel, I worked > around it by only using the Intel cluster for FreeBSD guests. > > I also tested booting FreeBSD ISO on the host metal (old Sun Fire, maybe > X4440, something like that), so it should just be a oVirt/QEMU thing, but I > never tried fixing it. > > /K > > > > 2018-05-30 2:06 GMT+08:00 Karli Sjöberg : > > On Wed, 2018-05-30 at 01:09 +0800, Paul.LKW wrote: > > Hi Alexandr Krivulya: > > Tried all configuration combination also could not boot still hang on > > the screen captured ! > > I just tried it as well, works fine, no problemo. My VM has: > 1 vCPU > 1GB vRAM > 8GB vHDD > > In a Nehalem cluster. > > Alex, Paul, what´s yours? > > /K > > > > > Alexandr Krivulya 於 29/5/2018 22:57 寫道: > > > Hi! > > > I procced with default instalation of 10.4-amd64 from ISO and it > > > boots just fine. Can you provide some more info about VM > > > configuration? > > > > > > 26.05.2018 20:59, Paul.LKW пишет: > > > > HI All: > > > > Any one have tried to boot up FreeBSD 10.4 successful? I tried > > > > 10.3 is all working fine but no lucky in 10.4 at all even boot > > > > from DVD !!! > > > > Attached is the freezes point. > > > > > > > > > > > > > > > > BR, > > > > Paul.LKW > > > > > > > > > > > > ___ > > > > Users mailing list -- users@ovirt.org > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > > > > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > > oVirt Code of Conduct: https://www.ovirt.org/community/about/commun > > > ity-guidelines/ > > > List Archives: https://lists.ovirt.org/archives/list/us...@ovirt.or > > > g/message/BCXCX5QMXL7SQUVBJMN3HFSQSS56VPJF/ > > > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: https://www.ovirt.org/community/about/communit > > y-guidelines/ > > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/ > > message/6ZPGH2ZJ7LL65GV2ATVPRV4FX6SBHM7Z/ > > > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community- > guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/ > message/NPIFXQ2XO36A5CJ2PLBJ6AWA7Y6PUB5X/ > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/52WH6U7QW4RREJYUYUD4277IQDWOTQUH/
[ovirt-users] Re: Fwd: FreeBSD after 10.3 could not boot (Freeze)
Hi Alexandr Krivulya: Tried all configuration combination also could not boot still hang on the screen captured ! Alexandr Krivulya 於 29/5/2018 22:57 寫道: Hi! I procced with default instalation of 10.4-amd64 from ISO and it boots just fine. Can you provide some more info about VM configuration? 26.05.2018 20:59, Paul.LKW пишет: HI All: Any one have tried to boot up FreeBSD 10.4 successful? I tried 10.3 is all working fine but no lucky in 10.4 at all even boot from DVD !!! Attached is the freezes point. BR, Paul.LKW ___ Users mailing list --users@ovirt.org To unsubscribe send an email tousers-le...@ovirt.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BCXCX5QMXL7SQUVBJMN3HFSQSS56VPJF/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6ZPGH2ZJ7LL65GV2ATVPRV4FX6SBHM7Z/
[ovirt-users] Fwd: FreeBSD after 10.3 could not boot (Freeze)
HI All: Any one have tried to boot up FreeBSD 10.4 successful? I tried 10.3 is all working fine but no lucky in 10.4 at all even boot from DVD !!! Attached is the freezes point. BR, Paul.LKW ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] FreeBSD after 10.3 could not boot (Freeze)
HI All: Any one have tried to boot up FreeBSD 10.4, I tried 10.3 is all working fine but no lucky in 10.4 at all even boot from DVD !!! Attached is the point freezes. BR, Paul.LKW ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
Re: [ovirt-users] hosted-engine --deploy Failed
Dear Y:
Yes you are right I could see there is a VM up process from "top" list
11273 qemu 20 0 4896964 3.066g 13456 S 5.0 9.8 25:36.69
/usr/libexec/qemu-kvm -name guest=HostedEngineLocal,debug-threads=on -S
-object
secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-3-HostedEngineLocal/m+...
but however vdsm.log is zero length.
Best Regards,
Paul.LKW
Yaniv Kaul 於 1/5/2018 22:18 寫道:
Can you provide other logs, vdsm log, for example?
The installation of the Engine seem to have succeeded, then it tried
to add the host. It was waiting for quite some time to get the host
into 'Up' state.
If, for example, it was installing packages, and the yum repo was very
slow, that may be a reason.
But there may be many other reasons as well.
Y.
On Tue, May 1, 2018 at 2:43 PM, Paul.LKW <paul@gmail.com
<mailto:paul@gmail.com>> wrote:
Dear All:
Recently I just make a try to create a Self-Hosted Engine oVirt
but unfortunately both two of my box also failed with bad
deployment experience, first of all the online documentation is
wrong under "oVirt Self-Hosted Engine Guide" section, it says the
deployment script "hosted-engine --deploy" will asking for Storage
configuration immediately but it is not true any more, also on
both of my 2 box one is configured with bond interface and one not
but also failed, in order to separate the issue I think better I
post the bonded interface one log for all your to Ref. first, the
script runs at "TASK [Wait for the host to be up]" for long long
time then give me the Error
[ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts":
{"ovirt_hosts": []}, "attempts": 120, "changed": false}
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Notify the user about a failure]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"The system may not be provisioned according to the playbook
results: please check the logs for the issue, fix accordingly or
re-deploy from scratch.\n"}
[ ERROR ] [DEPRECATION WARNING]: Using tests as filters is
deprecated. Instead of using
[ ERROR ] `result|succeeded` instead use `result is succeeded`.
This feature will be
[ ERROR ] removed in version 2.9. Deprecation warnings can be
disabled by setting
[ ERROR ] deprecation_warnings=False in ansible.cfg.
[ ERROR ] [DEPRECATION WARNING]: Using tests as filters is
deprecated. Instead of using
[ ERROR ] `result|succeeded` instead use `result is succeeded`.
This feature will be
[ ERROR ] removed in version 2.9. Deprecation warnings can be
disabled by setting
[ ERROR ] deprecation_warnings=False in ansible.cfg.
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] ok: [localhost]
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20180501190540.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: please check the logs
for the issue, fix accordingly or re-deploy from scratch.
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180501184459-4v6ctw.log
Attached is the so long LOG.
___
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted-engine --deploy Failed
Dear Philip:
It is not failed at the same point and I am using the localhost NFS as
the Storage currently as for testing purpose.
For the bonding interface host it even not going till that point asking
to setup Storage but the other does reach that point but still failed at
some other point.
I will provide another LOG later till this one solved first as it will
confusing all other in the mailing list I think, ^_^
Best Regards,
Paul.LKW
Phillip Bailey 於 1/5/2018 21:59 寫道:
Hi Paul,
I'm sorry to hear that you're having trouble with the hosted engine
deployment process. I looked through the log, but wasn't able to find
anything to explain why setup failed to bring up the VM. To clarify,
did both of your deployment attempts fail at the same place in the
process with the same error message? Also, did you use the same
storage device for the storage domain in both attempts?
Our resident expert is out today, but should be back tomorrow. I've
copied him on this message, so he can follow up once he's back if no
one else has been able to help before then.
As far as the documentation goes, there have been major changes to the
deployment process over the last few months and unfortunately, the
documentation simply hasn't caught up and for that, I apologize. It
should be updated in the near future to reflect the changes that have
been made.
Best regards,
-Phillip Bailey
On Tue, May 1, 2018 at 7:43 AM, Paul.LKW <paul@gmail.com
<mailto:paul@gmail.com>> wrote:
Dear All:
Recently I just make a try to create a Self-Hosted Engine oVirt
but unfortunately both two of my box also failed with bad
deployment experience, first of all the online documentation is
wrong under "oVirt Self-Hosted Engine Guide" section, it says the
deployment script "hosted-engine --deploy" will asking for Storage
configuration immediately but it is not true any more, also on
both of my 2 box one is configured with bond interface and one not
but also failed, in order to separate the issue I think better I
post the bonded interface one log for all your to Ref. first, the
script runs at "TASK [Wait for the host to be up]" for long long
time then give me the Error
[ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts":
{"ovirt_hosts": []}, "attempts": 120, "changed": false}
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Notify the user about a failure]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"The system may not be provisioned according to the playbook
results: please check the logs for the issue, fix accordingly or
re-deploy from scratch.\n"}
[ ERROR ] [DEPRECATION WARNING]: Using tests as filters is
deprecated. Instead of using
[ ERROR ] `result|succeeded` instead use `result is succeeded`.
This feature will be
[ ERROR ] removed in version 2.9. Deprecation warnings can be
disabled by setting
[ ERROR ] deprecation_warnings=False in ansible.cfg.
[ ERROR ] [DEPRECATION WARNING]: Using tests as filters is
deprecated. Instead of using
[ ERROR ] `result|succeeded` instead use `result is succeeded`.
This feature will be
[ ERROR ] removed in version 2.9. Deprecation warnings can be
disabled by setting
[ ERROR ] deprecation_warnings=False in ansible.cfg.
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] ok: [localhost]
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20180501190540.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: please check the logs
for the issue, fix accordingly or re-deploy from scratch.
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180501184459-4v6ctw.log
Attached is the so long LOG.
___
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Network Address Change
Hi Fabian: Yes, it is my main concern will the Engine still recognise the node(s) as there is no mechanism to knowlege the Engine the change when I change the well known ifcfg-... files, and I think it will not detect the change automatically In my case it is just 30 more VMs and I could reinstall the host of course but when it is few hundure VMs there should ne great issue using oVIrt. However I have to try as just 3 days remaining for the data center decommission. BR, Paul.LKW 於 12/8/2014 16:04, Fabian Deutsch 提到: - Original Message - Hi All: To be honest I do not see any config file in the host node /etc/ovirt-node inside, so even I put in the global maintenance mode I still don't know how to change the host to the new IP address. Hey Paul, if you are using oVirt Node (btw what version are you using?), then there are a couple of files, there is /etc/default/ovirt and the well known ifcfg files: /etc/sysconfig/netwprk-scripts/ifcfg-* And some other paths which are handled by vdsm. And vdsm is actually managing the network configuration when a Node is registered, that means, it can be that any changes to the configuration files get overwritten by vdsm again. Maybe Toni can say something about this. And I am also not sure if Engine will still recognize a Node, when you change the IP of the Node, without letting the Engine know about that. Sandro, do you know how you can tell Engine that the IP of a Node changed? Greetings fabian BR, Paul.LKW 於 11/8/2014 20:56, Sandro Bonazzola 提到: Il 08/08/2014 19:07, Paul.LKW ha scritto: Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject=O=simple.com, CN=1.2.3.4 gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Well, I think you can move the hosts to global maintenance, shutdown the hosted engine vm, move the first host and the vm to the new network. After that you should be able to move the other hosts to the new network. When finished you can exit global maintenance. Never tested such scenario so if any other can provide more info and maybe create a wiki page it would be nice. Not sure about what happen with the certificates if they've been generated using ip address instead of FQDN, probably they won't be valid anymore after the network change. Best Regards, Paul.LKW ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Network Address Change
Hi All: To be honest I do not see any config file in the host node /etc/ovirt-node inside, so even I put in the global maintenance mode I still don't know how to change the host to the new IP address. BR, Paul.LKW 於 11/8/2014 20:56, Sandro Bonazzola 提到: Il 08/08/2014 19:07, Paul.LKW ha scritto: Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject=O=simple.com, CN=1.2.3.4 gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Well, I think you can move the hosts to global maintenance, shutdown the hosted engine vm, move the first host and the vm to the new network. After that you should be able to move the other hosts to the new network. When finished you can exit global maintenance. Never tested such scenario so if any other can provide more info and maybe create a wiki page it would be nice. Not sure about what happen with the certificates if they've been generated using ip address instead of FQDN, probably they won't be valid anymore after the network change. Best Regards, Paul.LKW ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Network Address Change
Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject=O=simple.com, CN=1.2.3.4 gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Thin Provision Not Work
Hi David: ls -ls is still seeing 30G in total of the image file. I am using NFS as the Storage, will it cause could not Thin Provision successfully ? 於 10/7/2014 14:13, Yedidyah Bar David 提到: - Original Message - From: Paul.LKW paul@gmail.com To: users@ovirt.org Users@ovirt.org Sent: Thursday, July 10, 2014 7:49:17 AM Subject: [ovirt-users] Thin Provision Not Work Hi All: I find an issue in Thin Provision with oVirt, when I create a virtual disk I click the option Thin Provision (assign disk space 30G and actually it use 1G only), so I should see in the storage this disk for nearly 1G image file too. However it shows 30G image file. Any hints could fix this for using Thin Provision? Please check the file size with 'ls -ls'. http://en.wikipedia.org/wiki/Sparse_file ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Server 2012 R2 no drive found
Hi guys: Please do not just say your one is working it is helpless in fact there already some guys reported issues in Win platform (including me) and there is no way to report that, do your think paid version in Redhat would be the same or the client will already fxxked. I noted this seems occured only in newly installed ovirt and old installation is fine. Paul.LKW 於 2014/5/23 下午11:02，Neil nwilson...@gmail.com 寫道： Hi guys, I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter what I do, it either doesn't find an IDE drive or a Virtio drive (when using the virtio ISO). ovirt-engine-lib-3.4.0-1.el6.noarch ovirt-engine-restapi-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch ovirt-engine-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch ovirt-host-deploy-java-1.2.0-1.el6.noarch ovirt-engine-cli-3.2.0.10-1.el6.noarch ovirt-engine-setup-3.4.0-1.el6.noarch ovirt-host-deploy-1.2.0-1.el6.noarch ovirt-engine-backend-3.4.0-1.el6.noarch ovirt-image-uploader-3.4.0-1.el6.noarch ovirt-engine-tools-3.4.0-1.el6.noarch ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch ovirt-engine-setup-base-3.4.0-1.el6.noarch ovirt-iso-uploader-3.4.0-1.el6.noarch ovirt-engine-userportal-3.4.0-1.el6.noarch ovirt-log-collector-3.4.1-1.el6.noarch ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch ovirt-engine-dbscripts-3.4.0-1.el6.noarch vdsm-4.14.6-0.el6.x86_64 vdsm-xmlrpc-4.14.6-0.el6.noarch vdsm-cli-4.14.6-0.el6.noarch vdsm-python-zombiereaper-4.14.6-0.el6.noarch vdsm-python-4.14.6-0.el6.x86_64 qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 gpxe-roms-qemu-0.9.7-6.9.el6.noarch Is there a special trick to get this working, or could something be wrong? When it comes to creating a guest I don't see a Server 2012 R2 64bit in the drop down list? Thanks. Regards. Neil Wilson. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.4 could not install Windows server 08 R2 with virtio / virtio SCSI
Hi Daniel: But poorly is I tried use IDE only and in such setting I even could not see any hard drive and Windows always asking driver !!! Disapointed for oVirt !!! BR, Paul.LKW 於 6/5/2014 14:36, Daniel Helgenberger 提到: Hello Paul, I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for that matter). I can only recommend to try the following procedure in dealing with virtio-blk and virtio-scsi: Install Windows on a IDE drive; add a second image virtio-scsi. After the installation finishes install the driver for the unknown controller you find in device management with 'update driver' Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk respectively and remove the second disk if you like. Hope this helps, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 tel:+49/30/2408781-22 F: +49/30/2408781-10 tel:+49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de http://www.m-box.de/ www.monkeymen.tv http://www.monkeymen.tv/ Am 05.05.2014 um 17:29 schrieb Paul.LKW paul@gmail.com mailto:paul@gmail.com: Hi All: I just even tryied to use IDE only and the Windows 08 server R2 still could not find any harddisk, what does this bug exists in version 3.4? does it suitable for production? which one should I report this bug for ? Paul.LKW 於 4/5/2014 21:17, Paul.LKW 提到: Hi Jooppoor It should be show me the harddisk drive after the driver installed and then change back to the installation media disc, but the case is it could not load the driver correctly I could not see the harddisk drive so even I change back the media disc should be no meaning? Paul.LKW 於 2014/5/4 下午8:48，Joop jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl 寫道： Paul.LKW wrote: Hi All: I am new to oVirt and just installed oVirt for a try. Any one could install Win Server 08 R2 with virtio or virtio SCSI from oVirt 3.4? I am already changed the driver during the installation with virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 it show the device but when I click to select and then click OK, it always say No new device could be found. Make sure the driver files are correct and located on the driver installation media. Does any other see this issue, and know how to solve? Many thanks Did you change back to your W2K8 iso after loading the driver? The installer displays a very misleading message if you don't have your iso back in the cdrom after installing the drivers. Joop ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.4 could not install Windows server 08 R2 with virtio / virtio SCSI
Hi All: I just even tryied to use IDE only and the Windows 08 server R2 still could not find any harddisk, what does this bug exists in version 3.4? does it suitable for production? which one should I report this bug for ? Paul.LKW 於 4/5/2014 21:17, Paul.LKW 提到: Hi Joop It should be show me the harddisk drive after the driver installed and then change back to the installation media disc, but the case is it could not load the driver correctly I could not see the harddisk drive so even I change back the media disc should be no meaning? Paul.LKW 於 2014/5/4 下午8:48，Joop jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl 寫道： Paul.LKW wrote: Hi All: I am new to oVirt and just installed oVirt for a try. Any one could install Win Server 08 R2 with virtio or virtio SCSI from oVirt 3.4? I am already changed the driver during the installation with virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 it show the device but when I click to select and then click OK, it always say No new device could be found. Make sure the driver files are correct and located on the driver installation media. Does any other see this issue, and know how to solve? Many thanks Did you change back to your W2K8 iso after loading the driver? The installer displays a very misleading message if you don't have your iso back in the cdrom after installing the drivers. Joop ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
