Hi Daniel:
But poorly is I tried use IDE only and in such setting I even could not
see any hard drive and Windows always asking driver !!!
Disapointed for oVirt !!!
BR,
Paul.LKW
於 6/5/2014 14:36, Daniel Helgenberger 提到:
Hello Paul,
I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for
that matter).
I can only recommend to try the following procedure in dealing with
virtio-blk and virtio-scsi:
Install Windows on a IDE drive; add a second image virtio-scsi.
After the installation finishes install the driver for the unknown
controller you find in device management with 'update driver'
Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk
respectively and remove the second disk if you like.
Hope this helps,
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22 <tel:+49/30/2408781-22>
F: +49/30/2408781-10 <tel:+49/30/2408781-10>
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de <http://www.m-box.de/> www.monkeymen.tv
<http://www.monkeymen.tv/>
Am 05.05.2014 um 17:29 schrieb "Paul.LKW" <paul....@gmail.com
<mailto:paul....@gmail.com>>:
Hi All:
I just even tryied to use IDE only and the Windows 08 server R2 still
could not find any harddisk, what does this bug exists in version
3.4? does it suitable for production? which one should I report this
bug for ?
Paul.LKW
於 4/5/2014 21:17, Paul.LKW 提到:
Hi Jooppoor
It should be show me the harddisk drive after the driver installed
and then change back to the installation media disc, but the case is
it could not load the driver correctly I could not see the harddisk
drive so even I change back the media disc should be no meaning?
Paul.LKW
於 2014/5/4 下午8:48，"Joop" <jvdw...@xs4all.nl
<mailto:jvdw...@xs4all.nl>> 寫道：
Paul.LKW wrote:
Hi All:
I am new to oVirt and just installed oVirt for a try.
Any one could install Win Server 08 R2 with virtio or virtio
SCSI from oVirt 3.4?
I am already changed the driver during the installation with
virtio-win-0.1-74.iso, however I try what ever driver
directory for AMD64 it show the device but when I click to
select and then click OK, it always say "No new device could
be found. Make sure the driver files are correct and located
on the driver installation media".
Does any other see this issue, and know how to solve?
Many thanks
Did you change back to your W2K8 iso after loading the driver?
The installer displays a very misleading message if you don't
have your iso back in the cdrom after installing the drivers.
Joop
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
