Re: [Users] oVirt 3.2 and Solaris 10 guests
On Wed, Feb 27, 2013 at 11:16:53AM +, YamakasY wrote:
> Hi All,
>
> I have this same issue on Pfsense (FreeBSD) and even a fresh Ubuntu
> installation.
>
> I have installed Ubuntu to see if it was really an issue with the nics or the
> routing on Pfsense. On 3.1 this was working, I'm sure.
>
> I have one Ubuntu box running as VM that is connected to the management
> network and I can access it. When I attach my new installed VM to it, it
> cannot ping anything in that network, strange.
>
> I also have seen that when I attach two network e1000 cards to my Pfsense box
> that only one is up. Th Realtek ones are both up. With the e1000 I can only
> ping the gateway from the PFsense install and nothing more.
>
> What is going on here ? I'm already busy with this a long time and cannot fix
> it.
>
> I hope someone can help me out here.
Have you tried my wild guess of forcing acpiEnable=False?
>
> Cheers,
>
> Matt
>
> On 24 Feb 2013 22:21:20, Dan Kenigsberg wrote:
> > On Sun, Feb 24, 2013 at 07:18:46PM +0100, René Koch wrote:
> > > Thanks a lot for your feedback.
> > >
> > > I'll try to play around with qemu options next week and try to find out
> > > which setting causes this issue.
> > > What's the best way for changing this options - using hook scripts I
> > > guess...
>
> > I'm told that unsetting this option is not possible in Engine. So yeah,
> > you are left with either hook script or a temporary hack of
> >
> > diff --git a/vdsm/clientIF.py b/vdsm/clientIF.py
> > index 38aa0d7..b489e0e 100644
> > --- a/vdsm/clientIF.py
> > +++ b/vdsm/clientIF.py
> > @@ -341,6 +341,7 @@ class clientIF:
> > return res['status']['code']
> >
> > def createVm(self, vmParams):
> > +vmParams['acpiEnable'] = False
> > self.vmContainerLock.acquire()
> > self.log.info("vmContainerLock acquired by vm %s",
> >vmParams['vmId'])
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
Hi All,
I have this same issue on Pfsense (FreeBSD) and even a fresh Ubuntu
installation.
I have installed Ubuntu to see if it was really an issue with the nics or the
routing on Pfsense. On 3.1 this was working, I'm sure.
I have one Ubuntu box running as VM that is connected to the management network
and I can access it. When I attach my new installed VM to it, it cannot ping
anything in that network, strange.
I also have seen that when I attach two network e1000 cards to my Pfsense box
that only one is up. Th Realtek ones are both up. With the e1000 I can only
ping the gateway from the PFsense install and nothing more.
What is going on here ? I'm already busy with this a long time and cannot fix
it.
I hope someone can help me out here.
Cheers,
Matt
On 24 Feb 2013 22:21:20, Dan Kenigsberg wrote:
> On Sun, Feb 24, 2013 at 07:18:46PM +0100, René Koch wrote:
> > Thanks a lot for your feedback.
> >
> > I'll try to play around with qemu options next week and try to find out
> > which setting causes this issue.
> > What's the best way for changing this options - using hook scripts I
> > guess...
> I'm told that unsetting this option is not possible in Engine. So yeah,
> you are left with either hook script or a temporary hack of
>
> diff --git a/vdsm/clientIF.py b/vdsm/clientIF.py
> index 38aa0d7..b489e0e 100644
> --- a/vdsm/clientIF.py
> +++ b/vdsm/clientIF.py
> @@ -341,6 +341,7 @@ class clientIF:
> return res['status']['code']
>
> def createVm(self, vmParams):
> +vmParams['acpiEnable'] = False
> self.vmContainerLock.acquire()
> self.log.info("vmContainerLock acquired by vm %s",
>vmParams['vmId'])
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
On Sun, Feb 24, 2013 at 07:18:46PM +0100, René Koch wrote:
> Thanks a lot for your feedback.
>
> I'll try to play around with qemu options next week and try to find out which
> setting causes this issue.
> What's the best way for changing this options - using hook scripts I guess...
I'm told that unsetting this option is not possible in Engine. So yeah,
you are left with either hook script or a temporary hack of
diff --git a/vdsm/clientIF.py b/vdsm/clientIF.py
index 38aa0d7..b489e0e 100644
--- a/vdsm/clientIF.py
+++ b/vdsm/clientIF.py
@@ -341,6 +341,7 @@ class clientIF:
return res['status']['code']
def createVm(self, vmParams):
+vmParams['acpiEnable'] = False
self.vmContainerLock.acquire()
self.log.info("vmContainerLock acquired by vm %s",
vmParams['vmId'])
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
Thanks a lot for your feedback. I'll try to play around with qemu options next week and try to find out which setting causes this issue. What's the best way for changing this options - using hook scripts I guess... Regards, René -Original message- > From:Dan Kenigsberg > Sent: Wednesday 20th February 2013 11:52 > To: René Koch > Cc: Jean-Francois Saucier ; ovirt-users > Subject: Re: [Users] oVirt 3.2 and Solaris 10 guests > > On Thu, Feb 14, 2013 at 05:25:47PM +0100, René Koch (ovido) wrote: > > > > On Thu, 2013-02-14 at 11:22 -0500, Jean-Francois Saucier wrote: > > > On Thu, Feb 14, 2013 at 11:21 AM, Jiri Belka > > > wrote: > > > On Thu, 14 Feb 2013 10:49:13 -0500 > > > Jean-Francois Saucier wrote: > > > > > > > > oVirt 3.2: > > > > > -netdev tap,fd=25,id=hostnet0 -device > > > > > > > > > > > > > > > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 > > > > > > ^^^ - realtek, really? Try e1000 which is usually much > > > more reliable or virtio iface. I personally always had > > > terrible > > > experience with emulated rtl8139 by qemu-kvm, e1000 was OK. > > > > > > For me, it's the same if I choose the e1000 (which I choose the first > > > time and then try the rtl8139). > > > > > Same for me - e1000 aren't working with oVirt 3.2 and Solaris 10, too. > > I've heard rumours that it might be related to the fact that oVirt > starts VMs with ACPI enabled by default (there's a way in Engine to turn > this off). > > If this is not the case, please do a more extensive bisection of the > qemu command line. You have one "bad" cmdline; start trimming it until > it becomes "good". > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
On Thu, Feb 14, 2013 at 05:25:47PM +0100, René Koch (ovido) wrote: > > On Thu, 2013-02-14 at 11:22 -0500, Jean-Francois Saucier wrote: > > On Thu, Feb 14, 2013 at 11:21 AM, Jiri Belka > > wrote: > > On Thu, 14 Feb 2013 10:49:13 -0500 > > Jean-Francois Saucier wrote: > > > > > > oVirt 3.2: > > > > -netdev tap,fd=25,id=hostnet0 -device > > > > > > > > > > > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 > > > > ^^^ - realtek, really? Try e1000 which is usually much > > more reliable or virtio iface. I personally always had > > terrible > > experience with emulated rtl8139 by qemu-kvm, e1000 was OK. > > > > For me, it's the same if I choose the e1000 (which I choose the first > > time and then try the rtl8139). > > > Same for me - e1000 aren't working with oVirt 3.2 and Solaris 10, too. I've heard rumours that it might be related to the fact that oVirt starts VMs with ACPI enabled by default (there's a way in Engine to turn this off). If this is not the case, please do a more extensive bisection of the qemu command line. You have one "bad" cmdline; start trimming it until it becomes "good". ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
On Thu, 2013-02-14 at 11:22 -0500, Jean-Francois Saucier wrote: > On Thu, Feb 14, 2013 at 11:21 AM, Jiri Belka > wrote: > On Thu, 14 Feb 2013 10:49:13 -0500 > Jean-Francois Saucier wrote: > > > > oVirt 3.2: > > > -netdev tap,fd=25,id=hostnet0 -device > > > > > > > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 > > ^^^ - realtek, really? Try e1000 which is usually much > more reliable or virtio iface. I personally always had > terrible > experience with emulated rtl8139 by qemu-kvm, e1000 was OK. > > For me, it's the same if I choose the e1000 (which I choose the first > time and then try the rtl8139). > Same for me - e1000 aren't working with oVirt 3.2 and Solaris 10, too. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
On Thu, Feb 14, 2013 at 11:21 AM, Jiri Belka wrote: > On Thu, 14 Feb 2013 10:49:13 -0500 > Jean-Francois Saucier wrote: > > > > oVirt 3.2: > > > -netdev tap,fd=25,id=hostnet0 -device > > > > > > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 > ^^^ - realtek, really? Try e1000 which is usually much > more reliable or virtio iface. I personally always had terrible > experience with emulated rtl8139 by qemu-kvm, e1000 was OK. > For me, it's the same if I choose the e1000 (which I choose the first time and then try the rtl8139). -- Jean-Francois Saucier (djf_jeff) GPG key : 0xA9E6E953 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
On Thu, 14 Feb 2013 10:49:13 -0500 Jean-Francois Saucier wrote: > > oVirt 3.2: > > -netdev tap,fd=25,id=hostnet0 -device > > > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 ^^^ - realtek, really? Try e1000 which is usually much more reliable or virtio iface. I personally always had terrible experience with emulated rtl8139 by qemu-kvm, e1000 was OK. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 and Solaris 10 guests
I can confirm the same issue with Solaris 11 and oVirt 3.1. Everything seems OK, my network card is configured correctly (static IP) but cannot communicate with anyone. On Thu, Feb 14, 2013 at 10:46 AM, René Koch (ovido) wrote: > Hi, > > I've a strange network issue with Solaris 10 x86 guests on oVirt 3.2 > (beta) with an CentOS 6.3 hypervisor (using dreyou's repository for VDSM > packages). > > My host configuration is the following: > Operating system: Other > Network interface type: rtl8139 > Network Name: ovirtmgmt > Disk interface: IDE > > Disk is working fine and the network interface is detected by Solaris 10 > guest, as I can see a rtls0 interface with "ifconfig -a" and Solaris > installer also detects this interface. > > But when I try to send packages over this interface they never reach a > target - e.g. ping the gateway and "arp -an" doesn't show it's MAC > address. On the hypervisor I can see vnet(x) interface is on ovirtmgmt > bridge. Network traffic is working fine for all other VMs (RHEL 6 and > Fedora 18) on ovirtmgmt bridge. > > Btw, when creating a Solaris 10 guest on RHEV 3.1 with RHEL 6.3 > hypervisor the exactly same issue occurs - network interface is detected > but no traffic passes this interface. > > On a plain KVM-Host (RHEL 6.3) I can create a Solaris 10 host with > virt-manager using rtl8139 Virtual Network Interface Device model on a > bridge (network setup is nearly the same as for oVirt and RHEV). On this > RHEL 6.3 KVM-host network is working fine for Solaris guests. > > In the process list (ps -ef) the settings for oVirt and RHEL-KVM seem > the be nearly the same (different fd's and option bootindex=3 is missing > on KVM): > > oVirt 3.2: > -netdev tap,fd=25,id=hostnet0 -device > > rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 > > RHEL 6.3 KVM: > -netdev tap,fd=36,id=hostnet0 -device > rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:8e:3a:57,bus=pci.0,addr=0x3 > > KVM-Version is exactly the same on CentOS-oVirt-Hypervisor as on RHEL > KVM-host: > # rpm -qa | grep kvm > qemu-kvm-rhev-tools-0.12.1.2-2.295.el6.10.x86_64 > qemu-kvm-rhev-0.12.1.2-2.295.el6.10.x86_64 > > Do you have any clue why Solaris networking isn't working on oVirt but > on RHEL-KVM it is? > > I didn't try Fedora 18 or oVirt Node as a hypervisor yet - don't think > that there will be a difference. > > Thanks a lot for your feedback. > > > -- > Best Regards, > René Koch > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Jean-Francois Saucier (djf_jeff) GPG key : 0xA9E6E953 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt 3.2 and Solaris 10 guests
Hi, I've a strange network issue with Solaris 10 x86 guests on oVirt 3.2 (beta) with an CentOS 6.3 hypervisor (using dreyou's repository for VDSM packages). My host configuration is the following: Operating system: Other Network interface type: rtl8139 Network Name: ovirtmgmt Disk interface: IDE Disk is working fine and the network interface is detected by Solaris 10 guest, as I can see a rtls0 interface with "ifconfig -a" and Solaris installer also detects this interface. But when I try to send packages over this interface they never reach a target - e.g. ping the gateway and "arp -an" doesn't show it's MAC address. On the hypervisor I can see vnet(x) interface is on ovirtmgmt bridge. Network traffic is working fine for all other VMs (RHEL 6 and Fedora 18) on ovirtmgmt bridge. Btw, when creating a Solaris 10 guest on RHEV 3.1 with RHEL 6.3 hypervisor the exactly same issue occurs - network interface is detected but no traffic passes this interface. On a plain KVM-Host (RHEL 6.3) I can create a Solaris 10 host with virt-manager using rtl8139 Virtual Network Interface Device model on a bridge (network setup is nearly the same as for oVirt and RHEV). On this RHEL 6.3 KVM-host network is working fine for Solaris guests. In the process list (ps -ef) the settings for oVirt and RHEL-KVM seem the be nearly the same (different fd's and option bootindex=3 is missing on KVM): oVirt 3.2: -netdev tap,fd=25,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=00:1a:4a:00:64:9e,bus=pci.0,addr=0x3,bootindex=3 RHEL 6.3 KVM: -netdev tap,fd=36,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:8e:3a:57,bus=pci.0,addr=0x3 KVM-Version is exactly the same on CentOS-oVirt-Hypervisor as on RHEL KVM-host: # rpm -qa | grep kvm qemu-kvm-rhev-tools-0.12.1.2-2.295.el6.10.x86_64 qemu-kvm-rhev-0.12.1.2-2.295.el6.10.x86_64 Do you have any clue why Solaris networking isn't working on oVirt but on RHEL-KVM it is? I didn't try Fedora 18 or oVirt Node as a hypervisor yet - don't think that there will be a difference. Thanks a lot for your feedback. -- Best Regards, René Koch ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
