[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
You can't add the new volume as it contains the same data (UUID) as the old one , thus you need to detach the old one before adding the new one - of course this means downtime for all VMs on that storage. As you see , downgrading is more simpler. For me v6.5 was working, while anything above (6.6+) was causing complete lockdown. Also v7.0 was working, but it's supported in oVirt 4.4. Best Regards, Strahil Nikolov На 22 юни 2020 г. 7:21:15 GMT+03:00, C Williams написа: >Another question > >What version could I downgrade to safely ? I am at 6.9 . > >Thank You For Your Help !! > >On Sun, Jun 21, 2020 at 11:38 PM Strahil Nikolov > >wrote: > >> You are definitely reading it wrong. >> 1. I didn't create a new storage domain ontop this new volume. >> 2. I used cli >> >> Something like this (in your case it should be 'replica 3'): >> gluster volume create newvol replica 3 arbiter 1 >ovirt1:/new/brick/path >> ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path >> gluster volume start newvol >> >> #Detach oldvol from ovirt >> >> mount -t glusterfs ovirt1:/oldvol /mnt/oldvol >> mount -t glusterfs ovirt1:/newvol /mnt/newvol >> cp -a /mnt/oldvol/* /mnt/newvol >> >> #Add only newvol as a storage domain in oVirt >> #Import VMs >> >> I still think that you should downgrade your gluster packages!!! >> >> Best Regards, >> Strahil Nikolov >> >> На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams > >> написа: >> >Strahil, >> > >> >It sounds like you used a "System Managed Volume" for the new >storage >> >domain,is that correct? >> > >> >Thank You For Your Help ! >> > >> >On Sun, Jun 21, 2020 at 5:40 PM C Williams >> >wrote: >> > >> >> Strahil, >> >> >> >> So you made another oVirt Storage Domain -- then copied the data >with >> >cp >> >> -a from the failed volume to the new volume. >> >> >> >> At the root of the volume there will be the old domain folder id >ex >> >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d >> >> in my case. Did that cause issues with making the new domain >since >> >it is >> >> the same folder id as the old one ? >> >> >> >> Thank You For Your Help ! >> >> >> >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov >> > >> >> wrote: >> >> >> >>> In my situation I had only the ovirt nodes. >> >>> >> >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams >> > >> >>> написа: >> >>> >Strahil, >> >>> > >> >>> >So should I make the target volume on 3 bricks which do not have >> >ovirt >> >>> >-- >> >>> >just gluster ? In other words (3) Centos 7 hosts ? >> >>> > >> >>> >Thank You For Your Help ! >> >>> > >> >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov >> > >> >>> >wrote: >> >>> > >> >>> >> I created a fresh volume (which is not an ovirt sgorage >> >domain), >> >>> >set >> >>> >> the original storage domain in maintenance and detached >it. >> >>> >> Then I 'cp -a ' the data from the old to the new volume. >Next, >> >I >> >>> >just >> >>> >> added the new storage domain (the old one was a kind >of a >> >>> >> 'backup') - pointing to the new volume name. >> >>> >> >> >>> >> If you observe issues , I would recommend you to >downgrade >> >>> >> gluster packages one node at a time . Then you might be >able >> >to >> >>> >> restore your oVirt operations. >> >>> >> >> >>> >> Best Regards, >> >>> >> Strahil Nikolov >> >>> >> >> >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams >> >>> > >> >>> >> написа: >> >>> >> >Strahil, >> >>> >> > >> >>> >> >Thanks for the follow up ! >> >>> >> > >> >>> >> >How did you copy the data to another volume ? >> >>> >> > >> >>> >> >I have set up another storage domain GLCLNEW1 with a new >volume >> >>> >imgnew1 >> >>> >> >. >> >>> >> >How would you copy all of the data from the problematic >domain >> >GLCL3 >> >>> >> >with >> >>> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve >all >> >the >> >>> >VMs, >> >>> >> >VM >> >>> >> >disks, settings, etc. ? >> >>> >> > >> >>> >> >Remember all of the regular ovirt disk copy, disk move, VM >> >export >> >>> >> >tools >> >>> >> >are failing and my VMs and disks are trapped on domain GLCL3 >and >> >>> >volume >> >>> >> >images3 right now. >> >>> >> > >> >>> >> >Please let me know >> >>> >> > >> >>> >> >Thank You For Your Help ! >> >>> >> > >> >>> >> > >> >>> >> > >> >>> >> > >> >>> >> > >> >>> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov >> >>> > >> >>> >> >wrote: >> >>> >> > >> >>> >> >> Sorry to hear that. >> >>> >> >> I can say that for me 6.5 was working, while 6.6 didn't >> >and I >> >>> >> >upgraded >> >>> >> >> to 7.0 . >> >>> >> >> In the ended , I have ended with creating a new fresh >> >volume >> >>> >and >> >>> >> >> physically copying the data there, then I detached the >> >storage >> >>> >> >domains and >> >>> >> >> attached to the new ones (which holded the old data), >but >> >I >> >>> >> >could >> >>> >> >> afford the downtime. >> >>> >> >> Also, I can say that v7.0 ( but not 7.1 or anything >later) >> >>> >also >> >>> >> >> worked without the A
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Another question What version could I downgrade to safely ? I am at 6.9 . Thank You For Your Help !! On Sun, Jun 21, 2020 at 11:38 PM Strahil Nikolov wrote: > You are definitely reading it wrong. > 1. I didn't create a new storage domain ontop this new volume. > 2. I used cli > > Something like this (in your case it should be 'replica 3'): > gluster volume create newvol replica 3 arbiter 1 ovirt1:/new/brick/path > ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path > gluster volume start newvol > > #Detach oldvol from ovirt > > mount -t glusterfs ovirt1:/oldvol /mnt/oldvol > mount -t glusterfs ovirt1:/newvol /mnt/newvol > cp -a /mnt/oldvol/* /mnt/newvol > > #Add only newvol as a storage domain in oVirt > #Import VMs > > I still think that you should downgrade your gluster packages!!! > > Best Regards, > Strahil Nikolov > > На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams > написа: > >Strahil, > > > >It sounds like you used a "System Managed Volume" for the new storage > >domain,is that correct? > > > >Thank You For Your Help ! > > > >On Sun, Jun 21, 2020 at 5:40 PM C Williams > >wrote: > > > >> Strahil, > >> > >> So you made another oVirt Storage Domain -- then copied the data with > >cp > >> -a from the failed volume to the new volume. > >> > >> At the root of the volume there will be the old domain folder id ex > >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d > >> in my case. Did that cause issues with making the new domain since > >it is > >> the same folder id as the old one ? > >> > >> Thank You For Your Help ! > >> > >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov > > > >> wrote: > >> > >>> In my situation I had only the ovirt nodes. > >>> > >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams > > > >>> написа: > >>> >Strahil, > >>> > > >>> >So should I make the target volume on 3 bricks which do not have > >ovirt > >>> >-- > >>> >just gluster ? In other words (3) Centos 7 hosts ? > >>> > > >>> >Thank You For Your Help ! > >>> > > >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov > > > >>> >wrote: > >>> > > >>> >> I created a fresh volume (which is not an ovirt sgorage > >domain), > >>> >set > >>> >> the original storage domain in maintenance and detached it. > >>> >> Then I 'cp -a ' the data from the old to the new volume. Next, > >I > >>> >just > >>> >> added the new storage domain (the old one was a kind of a > >>> >> 'backup') - pointing to the new volume name. > >>> >> > >>> >> If you observe issues , I would recommend you to downgrade > >>> >> gluster packages one node at a time . Then you might be able > >to > >>> >> restore your oVirt operations. > >>> >> > >>> >> Best Regards, > >>> >> Strahil Nikolov > >>> >> > >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > >>> > > >>> >> написа: > >>> >> >Strahil, > >>> >> > > >>> >> >Thanks for the follow up ! > >>> >> > > >>> >> >How did you copy the data to another volume ? > >>> >> > > >>> >> >I have set up another storage domain GLCLNEW1 with a new volume > >>> >imgnew1 > >>> >> >. > >>> >> >How would you copy all of the data from the problematic domain > >GLCL3 > >>> >> >with > >>> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all > >the > >>> >VMs, > >>> >> >VM > >>> >> >disks, settings, etc. ? > >>> >> > > >>> >> >Remember all of the regular ovirt disk copy, disk move, VM > >export > >>> >> >tools > >>> >> >are failing and my VMs and disks are trapped on domain GLCL3 and > >>> >volume > >>> >> >images3 right now. > >>> >> > > >>> >> >Please let me know > >>> >> > > >>> >> >Thank You For Your Help ! > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > >>> > > >>> >> >wrote: > >>> >> > > >>> >> >> Sorry to hear that. > >>> >> >> I can say that for me 6.5 was working, while 6.6 didn't > >and I > >>> >> >upgraded > >>> >> >> to 7.0 . > >>> >> >> In the ended , I have ended with creating a new fresh > >volume > >>> >and > >>> >> >> physically copying the data there, then I detached the > >storage > >>> >> >domains and > >>> >> >> attached to the new ones (which holded the old data), but > >I > >>> >> >could > >>> >> >> afford the downtime. > >>> >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) > >>> >also > >>> >> >> worked without the ACL issue, but it causes some trouble > >in > >>> >oVirt > >>> >> >- so > >>> >> >> avoid that unless you have no other options. > >>> >> >> > >>> >> >> Best Regards, > >>> >> >> Strahil Nikolov > >>> >> >> > >>> >> >> > >>> >> >> > >>> >> >> > >>> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > >>> >> > > >>> >> >> написа: > >>> >> >> >Hello, > >>> >> >> > > >>> >> >> >Upgrading diidn't help > >>> >> >> > > >>> >> >> >Still acl errors trying to use a Virtual Disk from a VM > >>> >> >> > > >>> >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep > >acl > >>> >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >>> >> >> >[p
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Here is what I did to make my volume gluster volume create imgnew2a replica 3 transport tcp ov12.strg.srcle.com:/bricks/brick10/imgnew2a ov13.strg.srcle.com:/bricks/brick11/imgnew2a ov14.strg.srcle.com: /bricks/brick12/imgnew2a on a host with the old volume I did this mount -t glusterfs yy.yy.24.18:/images3/ /mnt/test/ -- Old defective volume 974 ls /mnt/test 975 mount 976 mkdir /mnt/test1trg 977 mount -t glusterfs yy.yy.24.24:/imgnew2a /mnt/test1trg New volume 978 mount 979 ls /mnt/test 980 cp -a /mnt/test/* /mnt/test1trg/ When I tried to add the storage domain -- I got the errors described previously about needing to clean out the old domain. Thank You For Your Help ! On Mon, Jun 22, 2020 at 12:01 AM C Williams wrote: > Thanks Strahil > > I made a new gluster volume using only gluster CLI. Mounted the old volume > and the new volume. Copied my data from the old volume to the new domain. > Set the volume options like the old domain via the CLI. Tried to make a new > storage domain using the paths to the new servers. However, oVirt > complained that there was already a domain there and that I needed to clean > it first. . > > What to do ? > > Thank You For Your Help ! > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KR4ARQ5IN6LEZ2HCAPBEH5G6GA3LPRJ2/
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Thanks Strahil I made a new gluster volume using only gluster CLI. Mounted the old volume and the new volume. Copied my data from the old volume to the new domain. Set the volume options like the old domain via the CLI. Tried to make a new storage domain using the paths to the new servers. However, oVirt complained that there was already a domain there and that I needed to clean it first. . What to do ? Thank You For Your Help ! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YQJYO6CK4WQHQLM2FJ435MXH3H2BI6JL/
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
You are definitely reading it wrong. 1. I didn't create a new storage domain ontop this new volume. 2. I used cli Something like this (in your case it should be 'replica 3'): gluster volume create newvol replica 3 arbiter 1 ovirt1:/new/brick/path ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path gluster volume start newvol #Detach oldvol from ovirt mount -t glusterfs ovirt1:/oldvol /mnt/oldvol mount -t glusterfs ovirt1:/newvol /mnt/newvol cp -a /mnt/oldvol/* /mnt/newvol #Add only newvol as a storage domain in oVirt #Import VMs I still think that you should downgrade your gluster packages!!! Best Regards, Strahil Nikolov На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams написа: >Strahil, > >It sounds like you used a "System Managed Volume" for the new storage >domain,is that correct? > >Thank You For Your Help ! > >On Sun, Jun 21, 2020 at 5:40 PM C Williams >wrote: > >> Strahil, >> >> So you made another oVirt Storage Domain -- then copied the data with >cp >> -a from the failed volume to the new volume. >> >> At the root of the volume there will be the old domain folder id ex >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d >> in my case. Did that cause issues with making the new domain since >it is >> the same folder id as the old one ? >> >> Thank You For Your Help ! >> >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov > >> wrote: >> >>> In my situation I had only the ovirt nodes. >>> >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams > >>> написа: >>> >Strahil, >>> > >>> >So should I make the target volume on 3 bricks which do not have >ovirt >>> >-- >>> >just gluster ? In other words (3) Centos 7 hosts ? >>> > >>> >Thank You For Your Help ! >>> > >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov > >>> >wrote: >>> > >>> >> I created a fresh volume (which is not an ovirt sgorage >domain), >>> >set >>> >> the original storage domain in maintenance and detached it. >>> >> Then I 'cp -a ' the data from the old to the new volume. Next, >I >>> >just >>> >> added the new storage domain (the old one was a kind of a >>> >> 'backup') - pointing to the new volume name. >>> >> >>> >> If you observe issues , I would recommend you to downgrade >>> >> gluster packages one node at a time . Then you might be able >to >>> >> restore your oVirt operations. >>> >> >>> >> Best Regards, >>> >> Strahil Nikolov >>> >> >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams >>> > >>> >> написа: >>> >> >Strahil, >>> >> > >>> >> >Thanks for the follow up ! >>> >> > >>> >> >How did you copy the data to another volume ? >>> >> > >>> >> >I have set up another storage domain GLCLNEW1 with a new volume >>> >imgnew1 >>> >> >. >>> >> >How would you copy all of the data from the problematic domain >GLCL3 >>> >> >with >>> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all >the >>> >VMs, >>> >> >VM >>> >> >disks, settings, etc. ? >>> >> > >>> >> >Remember all of the regular ovirt disk copy, disk move, VM >export >>> >> >tools >>> >> >are failing and my VMs and disks are trapped on domain GLCL3 and >>> >volume >>> >> >images3 right now. >>> >> > >>> >> >Please let me know >>> >> > >>> >> >Thank You For Your Help ! >>> >> > >>> >> > >>> >> > >>> >> > >>> >> > >>> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov >>> > >>> >> >wrote: >>> >> > >>> >> >> Sorry to hear that. >>> >> >> I can say that for me 6.5 was working, while 6.6 didn't >and I >>> >> >upgraded >>> >> >> to 7.0 . >>> >> >> In the ended , I have ended with creating a new fresh >volume >>> >and >>> >> >> physically copying the data there, then I detached the >storage >>> >> >domains and >>> >> >> attached to the new ones (which holded the old data), but >I >>> >> >could >>> >> >> afford the downtime. >>> >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) >>> >also >>> >> >> worked without the ACL issue, but it causes some trouble >in >>> >oVirt >>> >> >- so >>> >> >> avoid that unless you have no other options. >>> >> >> >>> >> >> Best Regards, >>> >> >> Strahil Nikolov >>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams >>> >> > >>> >> >> написа: >>> >> >> >Hello, >>> >> >> > >>> >> >> >Upgrading diidn't help >>> >> >> > >>> >> >> >Still acl errors trying to use a Virtual Disk from a VM >>> >> >> > >>> >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep >acl >>> >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] >>> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] >>> >> >0-images3-access-control: >>> >> >> >client: >>> >> >> >>> >> >> >>> >> >>> >> >>> >>> CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >>> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >>> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), >>> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, >acl:-) >>> >> >> >[Permission denied] >>> >> >> >Th
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Strahil, It sounds like you used a "System Managed Volume" for the new storage domain,is that correct? Thank You For Your Help ! On Sun, Jun 21, 2020 at 5:40 PM C Williams wrote: > Strahil, > > So you made another oVirt Storage Domain -- then copied the data with cp > -a from the failed volume to the new volume. > > At the root of the volume there will be the old domain folder id ex > 5fe3ad3f-2d21-404c-832e-4dc7318ca10d > in my case. Did that cause issues with making the new domain since it is > the same folder id as the old one ? > > Thank You For Your Help ! > > On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov > wrote: > >> In my situation I had only the ovirt nodes. >> >> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams >> написа: >> >Strahil, >> > >> >So should I make the target volume on 3 bricks which do not have ovirt >> >-- >> >just gluster ? In other words (3) Centos 7 hosts ? >> > >> >Thank You For Your Help ! >> > >> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov >> >wrote: >> > >> >> I created a fresh volume (which is not an ovirt sgorage domain), >> >set >> >> the original storage domain in maintenance and detached it. >> >> Then I 'cp -a ' the data from the old to the new volume. Next, I >> >just >> >> added the new storage domain (the old one was a kind of a >> >> 'backup') - pointing to the new volume name. >> >> >> >> If you observe issues , I would recommend you to downgrade >> >> gluster packages one node at a time . Then you might be able to >> >> restore your oVirt operations. >> >> >> >> Best Regards, >> >> Strahil Nikolov >> >> >> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams >> > >> >> написа: >> >> >Strahil, >> >> > >> >> >Thanks for the follow up ! >> >> > >> >> >How did you copy the data to another volume ? >> >> > >> >> >I have set up another storage domain GLCLNEW1 with a new volume >> >imgnew1 >> >> >. >> >> >How would you copy all of the data from the problematic domain GLCL3 >> >> >with >> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the >> >VMs, >> >> >VM >> >> >disks, settings, etc. ? >> >> > >> >> >Remember all of the regular ovirt disk copy, disk move, VM export >> >> >tools >> >> >are failing and my VMs and disks are trapped on domain GLCL3 and >> >volume >> >> >images3 right now. >> >> > >> >> >Please let me know >> >> > >> >> >Thank You For Your Help ! >> >> > >> >> > >> >> > >> >> > >> >> > >> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov >> > >> >> >wrote: >> >> > >> >> >> Sorry to hear that. >> >> >> I can say that for me 6.5 was working, while 6.6 didn't and I >> >> >upgraded >> >> >> to 7.0 . >> >> >> In the ended , I have ended with creating a new fresh volume >> >and >> >> >> physically copying the data there, then I detached the storage >> >> >domains and >> >> >> attached to the new ones (which holded the old data), but I >> >> >could >> >> >> afford the downtime. >> >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) >> >also >> >> >> worked without the ACL issue, but it causes some trouble in >> >oVirt >> >> >- so >> >> >> avoid that unless you have no other options. >> >> >> >> >> >> Best Regards, >> >> >> Strahil Nikolov >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams >> >> > >> >> >> написа: >> >> >> >Hello, >> >> >> > >> >> >> >Upgrading diidn't help >> >> >> > >> >> >> >Still acl errors trying to use a Virtual Disk from a VM >> >> >> > >> >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl >> >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] >> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] >> >> >0-images3-access-control: >> >> >> >client: >> >> >> >> >> >> >> >> >> >> >> >> >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >> >> >[Permission denied] >> >> >> >The message "I [MSGID: 139001] >> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] >> >> >0-images3-access-control: >> >> >> >client: >> >> >> >> >> >> >> >> >> >> >> >> >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >> >> >[Permission denied]" repeated 2 times between [2020-06-21 >> >> >> >01:33:45.665888] >> >> >> >and [2020-06-21 01:33:45.806779] >> >> >> > >> >> >> >Thank You For Your Help ! >> >> >> > >> >> >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams >> > >> >> >> >wrote: >> >> >> > >> >> >> >> Hello, >> >> >> >> >> >> >> >> Based on the situation, I am planning to upgrade the 3 affec
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Strahil, So you made another oVirt Storage Domain -- then copied the data with cp -a from the failed volume to the new volume. At the root of the volume there will be the old domain folder id ex 5fe3ad3f-2d21-404c-832e-4dc7318ca10d in my case. Did that cause issues with making the new domain since it is the same folder id as the old one ? Thank You For Your Help ! On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov wrote: > In my situation I had only the ovirt nodes. > > На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams > написа: > >Strahil, > > > >So should I make the target volume on 3 bricks which do not have ovirt > >-- > >just gluster ? In other words (3) Centos 7 hosts ? > > > >Thank You For Your Help ! > > > >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov > >wrote: > > > >> I created a fresh volume (which is not an ovirt sgorage domain), > >set > >> the original storage domain in maintenance and detached it. > >> Then I 'cp -a ' the data from the old to the new volume. Next, I > >just > >> added the new storage domain (the old one was a kind of a > >> 'backup') - pointing to the new volume name. > >> > >> If you observe issues , I would recommend you to downgrade > >> gluster packages one node at a time . Then you might be able to > >> restore your oVirt operations. > >> > >> Best Regards, > >> Strahil Nikolov > >> > >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > > > >> написа: > >> >Strahil, > >> > > >> >Thanks for the follow up ! > >> > > >> >How did you copy the data to another volume ? > >> > > >> >I have set up another storage domain GLCLNEW1 with a new volume > >imgnew1 > >> >. > >> >How would you copy all of the data from the problematic domain GLCL3 > >> >with > >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the > >VMs, > >> >VM > >> >disks, settings, etc. ? > >> > > >> >Remember all of the regular ovirt disk copy, disk move, VM export > >> >tools > >> >are failing and my VMs and disks are trapped on domain GLCL3 and > >volume > >> >images3 right now. > >> > > >> >Please let me know > >> > > >> >Thank You For Your Help ! > >> > > >> > > >> > > >> > > >> > > >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > > > >> >wrote: > >> > > >> >> Sorry to hear that. > >> >> I can say that for me 6.5 was working, while 6.6 didn't and I > >> >upgraded > >> >> to 7.0 . > >> >> In the ended , I have ended with creating a new fresh volume > >and > >> >> physically copying the data there, then I detached the storage > >> >domains and > >> >> attached to the new ones (which holded the old data), but I > >> >could > >> >> afford the downtime. > >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) > >also > >> >> worked without the ACL issue, but it causes some trouble in > >oVirt > >> >- so > >> >> avoid that unless you have no other options. > >> >> > >> >> Best Regards, > >> >> Strahil Nikolov > >> >> > >> >> > >> >> > >> >> > >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > >> > > >> >> написа: > >> >> >Hello, > >> >> > > >> >> >Upgrading diidn't help > >> >> > > >> >> >Still acl errors trying to use a Virtual Disk from a VM > >> >> > > >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl > >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >> >0-images3-access-control: > >> >> >client: > >> >> > >> >> > >> > >> > > >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >> >> >[Permission denied] > >> >> >The message "I [MSGID: 139001] > >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >> >0-images3-access-control: > >> >> >client: > >> >> > >> >> > >> > >> > > >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >> >> >[Permission denied]" repeated 2 times between [2020-06-21 > >> >> >01:33:45.665888] > >> >> >and [2020-06-21 01:33:45.806779] > >> >> > > >> >> >Thank You For Your Help ! > >> >> > > >> >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams > > > >> >> >wrote: > >> >> > > >> >> >> Hello, > >> >> >> > >> >> >> Based on the situation, I am planning to upgrade the 3 affected > >> >> >hosts. > >> >> >> > >> >> >> My reasoning is that the hosts/bricks were attached to 6.9 at > >one > >> >> >time. > >> >> >> > >> >> >> Thanks For Your Help ! > >> >> >> > >> >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > >> > > >> >> >> wrote: > >> >> >> > >> >> >>> Strahil, > >> >> >>> > >> >> >>> The gluster version on the current
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
In my situation I had only the ovirt nodes. На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams написа: >Strahil, > >So should I make the target volume on 3 bricks which do not have ovirt >-- >just gluster ? In other words (3) Centos 7 hosts ? > >Thank You For Your Help ! > >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov >wrote: > >> I created a fresh volume (which is not an ovirt sgorage domain), >set >> the original storage domain in maintenance and detached it. >> Then I 'cp -a ' the data from the old to the new volume. Next, I >just >> added the new storage domain (the old one was a kind of a >> 'backup') - pointing to the new volume name. >> >> If you observe issues , I would recommend you to downgrade >> gluster packages one node at a time . Then you might be able to >> restore your oVirt operations. >> >> Best Regards, >> Strahil Nikolov >> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > >> написа: >> >Strahil, >> > >> >Thanks for the follow up ! >> > >> >How did you copy the data to another volume ? >> > >> >I have set up another storage domain GLCLNEW1 with a new volume >imgnew1 >> >. >> >How would you copy all of the data from the problematic domain GLCL3 >> >with >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the >VMs, >> >VM >> >disks, settings, etc. ? >> > >> >Remember all of the regular ovirt disk copy, disk move, VM export >> >tools >> >are failing and my VMs and disks are trapped on domain GLCL3 and >volume >> >images3 right now. >> > >> >Please let me know >> > >> >Thank You For Your Help ! >> > >> > >> > >> > >> > >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > >> >wrote: >> > >> >> Sorry to hear that. >> >> I can say that for me 6.5 was working, while 6.6 didn't and I >> >upgraded >> >> to 7.0 . >> >> In the ended , I have ended with creating a new fresh volume >and >> >> physically copying the data there, then I detached the storage >> >domains and >> >> attached to the new ones (which holded the old data), but I >> >could >> >> afford the downtime. >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) >also >> >> worked without the ACL issue, but it causes some trouble in >oVirt >> >- so >> >> avoid that unless you have no other options. >> >> >> >> Best Regards, >> >> Strahil Nikolov >> >> >> >> >> >> >> >> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams >> > >> >> написа: >> >> >Hello, >> >> > >> >> >Upgrading diidn't help >> >> > >> >> >Still acl errors trying to use a Virtual Disk from a VM >> >> > >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] >> >0-images3-access-control: >> >> >client: >> >> >> >> >> >> >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >> >[Permission denied] >> >> >The message "I [MSGID: 139001] >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] >> >0-images3-access-control: >> >> >client: >> >> >> >> >> >> >>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >> >[Permission denied]" repeated 2 times between [2020-06-21 >> >> >01:33:45.665888] >> >> >and [2020-06-21 01:33:45.806779] >> >> > >> >> >Thank You For Your Help ! >> >> > >> >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams > >> >> >wrote: >> >> > >> >> >> Hello, >> >> >> >> >> >> Based on the situation, I am planning to upgrade the 3 affected >> >> >hosts. >> >> >> >> >> >> My reasoning is that the hosts/bricks were attached to 6.9 at >one >> >> >time. >> >> >> >> >> >> Thanks For Your Help ! >> >> >> >> >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams >> > >> >> >> wrote: >> >> >> >> >> >>> Strahil, >> >> >>> >> >> >>> The gluster version on the current 3 gluster hosts is 6.7 >(last >> >> >update >> >> >>> 2/26). These 3 hosts provide 1 brick each for the replica 3 >> >volume. >> >> >>> >> >> >>> Earlier I had tried to add 6 additional hosts to the cluster. >> >Those >> >> >new >> >> >>> hosts were 6.9 gluster. >> >> >>> >> >> >>> I attempted to make a new separate volume with 3 bricks >provided >> >by >> >> >the 3 >> >> >>> new gluster 6.9 hosts. After having many errors from the >oVirt >> >> >interface, >> >> >>> I gave up and removed the 6 new hosts from the cluster. That >is >> >> >where the >> >> >>> problems started. The intent was to expand the gluster cluster >> >while >> >> >making >> >> >>> 2 new volumes for that cluster. The ovirt compute cluster >would >> >> >al
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Strahil, So should I make the target volume on 3 bricks which do not have ovirt -- just gluster ? In other words (3) Centos 7 hosts ? Thank You For Your Help ! On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov wrote: > I created a fresh volume (which is not an ovirt sgorage domain), set > the original storage domain in maintenance and detached it. > Then I 'cp -a ' the data from the old to the new volume. Next, I just > added the new storage domain (the old one was a kind of a > 'backup') - pointing to the new volume name. > > If you observe issues , I would recommend you to downgrade > gluster packages one node at a time . Then you might be able to > restore your oVirt operations. > > Best Regards, > Strahil Nikolov > > На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > написа: > >Strahil, > > > >Thanks for the follow up ! > > > >How did you copy the data to another volume ? > > > >I have set up another storage domain GLCLNEW1 with a new volume imgnew1 > >. > >How would you copy all of the data from the problematic domain GLCL3 > >with > >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the VMs, > >VM > >disks, settings, etc. ? > > > >Remember all of the regular ovirt disk copy, disk move, VM export > >tools > >are failing and my VMs and disks are trapped on domain GLCL3 and volume > >images3 right now. > > > >Please let me know > > > >Thank You For Your Help ! > > > > > > > > > > > >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > >wrote: > > > >> Sorry to hear that. > >> I can say that for me 6.5 was working, while 6.6 didn't and I > >upgraded > >> to 7.0 . > >> In the ended , I have ended with creating a new fresh volume and > >> physically copying the data there, then I detached the storage > >domains and > >> attached to the new ones (which holded the old data), but I > >could > >> afford the downtime. > >> Also, I can say that v7.0 ( but not 7.1 or anything later) also > >> worked without the ACL issue, but it causes some trouble in oVirt > >- so > >> avoid that unless you have no other options. > >> > >> Best Regards, > >> Strahil Nikolov > >> > >> > >> > >> > >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > > > >> написа: > >> >Hello, > >> > > >> >Upgrading diidn't help > >> > > >> >Still acl errors trying to use a Virtual Disk from a VM > >> > > >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl > >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >0-images3-access-control: > >> >client: > >> > >> > > >>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >> >req(uid:107,gid:107,perm:1,ngrps:3), > >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >> >[Permission denied] > >> >The message "I [MSGID: 139001] > >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >0-images3-access-control: > >> >client: > >> > >> > > >>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >> >req(uid:107,gid:107,perm:1,ngrps:3), > >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >> >[Permission denied]" repeated 2 times between [2020-06-21 > >> >01:33:45.665888] > >> >and [2020-06-21 01:33:45.806779] > >> > > >> >Thank You For Your Help ! > >> > > >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams > >> >wrote: > >> > > >> >> Hello, > >> >> > >> >> Based on the situation, I am planning to upgrade the 3 affected > >> >hosts. > >> >> > >> >> My reasoning is that the hosts/bricks were attached to 6.9 at one > >> >time. > >> >> > >> >> Thanks For Your Help ! > >> >> > >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > > > >> >> wrote: > >> >> > >> >>> Strahil, > >> >>> > >> >>> The gluster version on the current 3 gluster hosts is 6.7 (last > >> >update > >> >>> 2/26). These 3 hosts provide 1 brick each for the replica 3 > >volume. > >> >>> > >> >>> Earlier I had tried to add 6 additional hosts to the cluster. > >Those > >> >new > >> >>> hosts were 6.9 gluster. > >> >>> > >> >>> I attempted to make a new separate volume with 3 bricks provided > >by > >> >the 3 > >> >>> new gluster 6.9 hosts. After having many errors from the oVirt > >> >interface, > >> >>> I gave up and removed the 6 new hosts from the cluster. That is > >> >where the > >> >>> problems started. The intent was to expand the gluster cluster > >while > >> >making > >> >>> 2 new volumes for that cluster. The ovirt compute cluster would > >> >allow for > >> >>> efficient VM migration between 9 hosts -- while having separate > >> >gluster > >> >>> volumes for safety purposes. > >> >>> > >> >>> Looking at the brick logs, I see where there are acl errors > >starting > >> >from > >> >>> the time of the removal of the 6 new h
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
I created a fresh volume (which is not an ovirt sgorage domain), set the original storage domain in maintenance and detached it. Then I 'cp -a ' the data from the old to the new volume. Next, I just added the new storage domain (the old one was a kind of a 'backup') - pointing to the new volume name. If you observe issues , I would recommend you to downgrade gluster packages one node at a time . Then you might be able to restore your oVirt operations. Best Regards, Strahil Nikolov На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams написа: >Strahil, > >Thanks for the follow up ! > >How did you copy the data to another volume ? > >I have set up another storage domain GLCLNEW1 with a new volume imgnew1 >. >How would you copy all of the data from the problematic domain GLCL3 >with >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the VMs, >VM >disks, settings, etc. ? > >Remember all of the regular ovirt disk copy, disk move, VM export >tools >are failing and my VMs and disks are trapped on domain GLCL3 and volume >images3 right now. > >Please let me know > >Thank You For Your Help ! > > > > > >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov >wrote: > >> Sorry to hear that. >> I can say that for me 6.5 was working, while 6.6 didn't and I >upgraded >> to 7.0 . >> In the ended , I have ended with creating a new fresh volume and >> physically copying the data there, then I detached the storage >domains and >> attached to the new ones (which holded the old data), but I >could >> afford the downtime. >> Also, I can say that v7.0 ( but not 7.1 or anything later) also >> worked without the ACL issue, but it causes some trouble in oVirt >- so >> avoid that unless you have no other options. >> >> Best Regards, >> Strahil Nikolov >> >> >> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > >> написа: >> >Hello, >> > >> >Upgrading diidn't help >> > >> >Still acl errors trying to use a Virtual Disk from a VM >> > >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] >> >[posix-acl.c:263:posix_acl_log_permit_denied] >0-images3-access-control: >> >client: >> >> >>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >[Permission denied] >> >The message "I [MSGID: 139001] >> >[posix-acl.c:263:posix_acl_log_permit_denied] >0-images3-access-control: >> >client: >> >> >>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> >req(uid:107,gid:107,perm:1,ngrps:3), >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >> >[Permission denied]" repeated 2 times between [2020-06-21 >> >01:33:45.665888] >> >and [2020-06-21 01:33:45.806779] >> > >> >Thank You For Your Help ! >> > >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams >> >wrote: >> > >> >> Hello, >> >> >> >> Based on the situation, I am planning to upgrade the 3 affected >> >hosts. >> >> >> >> My reasoning is that the hosts/bricks were attached to 6.9 at one >> >time. >> >> >> >> Thanks For Your Help ! >> >> >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > >> >> wrote: >> >> >> >>> Strahil, >> >>> >> >>> The gluster version on the current 3 gluster hosts is 6.7 (last >> >update >> >>> 2/26). These 3 hosts provide 1 brick each for the replica 3 >volume. >> >>> >> >>> Earlier I had tried to add 6 additional hosts to the cluster. >Those >> >new >> >>> hosts were 6.9 gluster. >> >>> >> >>> I attempted to make a new separate volume with 3 bricks provided >by >> >the 3 >> >>> new gluster 6.9 hosts. After having many errors from the oVirt >> >interface, >> >>> I gave up and removed the 6 new hosts from the cluster. That is >> >where the >> >>> problems started. The intent was to expand the gluster cluster >while >> >making >> >>> 2 new volumes for that cluster. The ovirt compute cluster would >> >allow for >> >>> efficient VM migration between 9 hosts -- while having separate >> >gluster >> >>> volumes for safety purposes. >> >>> >> >>> Looking at the brick logs, I see where there are acl errors >starting >> >from >> >>> the time of the removal of the 6 new hosts. >> >>> >> >>> Please check out the attached brick log from 6/14-18. The events >> >started >> >>> on 6/17. >> >>> >> >>> I wish I had a downgrade path. >> >>> >> >>> Thank You For The Help !! >> >>> >> >>> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov >> > >> >>> wrote: >> >>> >> Hi , >> >> >> This one really looks like the ACL bug I was hit with when I >> >updated >> from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. >> >> Did you update your setup recently ? Did yo
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Strahil, Thanks for the follow up ! How did you copy the data to another volume ? I have set up another storage domain GLCLNEW1 with a new volume imgnew1 . How would you copy all of the data from the problematic domain GLCL3 with volume images3 to GLCLNEW1 and volume imgnew1 and preserve all the VMs, VM disks, settings, etc. ? Remember all of the regular ovirt disk copy, disk move, VM export tools are failing and my VMs and disks are trapped on domain GLCL3 and volume images3 right now. Please let me know Thank You For Your Help ! On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov wrote: > Sorry to hear that. > I can say that for me 6.5 was working, while 6.6 didn't and I upgraded > to 7.0 . > In the ended , I have ended with creating a new fresh volume and > physically copying the data there, then I detached the storage domains and > attached to the new ones (which holded the old data), but I could > afford the downtime. > Also, I can say that v7.0 ( but not 7.1 or anything later) also > worked without the ACL issue, but it causes some trouble in oVirt - so > avoid that unless you have no other options. > > Best Regards, > Strahil Nikolov > > > > > На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > написа: > >Hello, > > > >Upgrading diidn't help > > > >Still acl errors trying to use a Virtual Disk from a VM > > > >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl > >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >[posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: > >client: > > >CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >req(uid:107,gid:107,perm:1,ngrps:3), > >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >[Permission denied] > >The message "I [MSGID: 139001] > >[posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: > >client: > > >CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >req(uid:107,gid:107,perm:1,ngrps:3), > >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) > >[Permission denied]" repeated 2 times between [2020-06-21 > >01:33:45.665888] > >and [2020-06-21 01:33:45.806779] > > > >Thank You For Your Help ! > > > >On Sat, Jun 20, 2020 at 8:59 PM C Williams > >wrote: > > > >> Hello, > >> > >> Based on the situation, I am planning to upgrade the 3 affected > >hosts. > >> > >> My reasoning is that the hosts/bricks were attached to 6.9 at one > >time. > >> > >> Thanks For Your Help ! > >> > >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > >> wrote: > >> > >>> Strahil, > >>> > >>> The gluster version on the current 3 gluster hosts is 6.7 (last > >update > >>> 2/26). These 3 hosts provide 1 brick each for the replica 3 volume. > >>> > >>> Earlier I had tried to add 6 additional hosts to the cluster. Those > >new > >>> hosts were 6.9 gluster. > >>> > >>> I attempted to make a new separate volume with 3 bricks provided by > >the 3 > >>> new gluster 6.9 hosts. After having many errors from the oVirt > >interface, > >>> I gave up and removed the 6 new hosts from the cluster. That is > >where the > >>> problems started. The intent was to expand the gluster cluster while > >making > >>> 2 new volumes for that cluster. The ovirt compute cluster would > >allow for > >>> efficient VM migration between 9 hosts -- while having separate > >gluster > >>> volumes for safety purposes. > >>> > >>> Looking at the brick logs, I see where there are acl errors starting > >from > >>> the time of the removal of the 6 new hosts. > >>> > >>> Please check out the attached brick log from 6/14-18. The events > >started > >>> on 6/17. > >>> > >>> I wish I had a downgrade path. > >>> > >>> Thank You For The Help !! > >>> > >>> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov > > > >>> wrote: > >>> > Hi , > > > This one really looks like the ACL bug I was hit with when I > >updated > from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. > > Did you update your setup recently ? Did you upgrade gluster also ? > > You have to check the gluster logs in order to verify that, so you > >can > try: > > 1. Set Gluster logs to trace level (for details check: > > > > https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level > ) > 2. Power up a VM that was already off , or retry the procedure from > >the > logs you sent. > 3. Stop the trace level of the logs > 4. Check libvirt logs on the host that was supposed to power up the > >VM > (in case a VM was powered on) > 5. Check the gluster brick logs on all nodes for ACL errors. > Here is a sample from my old logs: > > gluster_bricks-data_fas
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Sorry to hear that. I can say that for me 6.5 was working, while 6.6 didn't and I upgraded to 7.0 . In the ended , I have ended with creating a new fresh volume and physically copying the data there, then I detached the storage domains and attached to the new ones (which holded the old data), but I could afford the downtime. Also, I can say that v7.0 ( but not 7.1 or anything later) also worked without the ACL issue, but it causes some trouble in oVirt - so avoid that unless you have no other options. Best Regards, Strahil Nikolov На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams написа: >Hello, > >Upgrading diidn't help > >Still acl errors trying to use a Virtual Disk from a VM > >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl >[2020-06-21 01:33:45.665888] I [MSGID: 139001] >[posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: >client: >CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >req(uid:107,gid:107,perm:1,ngrps:3), >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >[Permission denied] >The message "I [MSGID: 139001] >[posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: >client: >CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >req(uid:107,gid:107,perm:1,ngrps:3), >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >[Permission denied]" repeated 2 times between [2020-06-21 >01:33:45.665888] >and [2020-06-21 01:33:45.806779] > >Thank You For Your Help ! > >On Sat, Jun 20, 2020 at 8:59 PM C Williams >wrote: > >> Hello, >> >> Based on the situation, I am planning to upgrade the 3 affected >hosts. >> >> My reasoning is that the hosts/bricks were attached to 6.9 at one >time. >> >> Thanks For Your Help ! >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams >> wrote: >> >>> Strahil, >>> >>> The gluster version on the current 3 gluster hosts is 6.7 (last >update >>> 2/26). These 3 hosts provide 1 brick each for the replica 3 volume. >>> >>> Earlier I had tried to add 6 additional hosts to the cluster. Those >new >>> hosts were 6.9 gluster. >>> >>> I attempted to make a new separate volume with 3 bricks provided by >the 3 >>> new gluster 6.9 hosts. After having many errors from the oVirt >interface, >>> I gave up and removed the 6 new hosts from the cluster. That is >where the >>> problems started. The intent was to expand the gluster cluster while >making >>> 2 new volumes for that cluster. The ovirt compute cluster would >allow for >>> efficient VM migration between 9 hosts -- while having separate >gluster >>> volumes for safety purposes. >>> >>> Looking at the brick logs, I see where there are acl errors starting >from >>> the time of the removal of the 6 new hosts. >>> >>> Please check out the attached brick log from 6/14-18. The events >started >>> on 6/17. >>> >>> I wish I had a downgrade path. >>> >>> Thank You For The Help !! >>> >>> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov > >>> wrote: >>> Hi , This one really looks like the ACL bug I was hit with when I >updated from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. Did you update your setup recently ? Did you upgrade gluster also ? You have to check the gluster logs in order to verify that, so you >can try: 1. Set Gluster logs to trace level (for details check: >https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level ) 2. Power up a VM that was already off , or retry the procedure from >the logs you sent. 3. Stop the trace level of the logs 4. Check libvirt logs on the host that was supposed to power up the >VM (in case a VM was powered on) 5. Check the gluster brick logs on all nodes for ACL errors. Here is a sample from my old logs: gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 >13:19:41.489047] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:36,gid:36,perm:1,ngrps:3), ctx (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 >13:22:51.818796] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Hello, Upgrading diidn't help Still acl errors trying to use a Virtual Disk from a VM [root@ov06 bricks]# tail bricks-brick04-images3.log | grep acl [2020-06-21 01:33:45.665888] I [MSGID: 139001] [posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: client: CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:107,gid:107,perm:1,ngrps:3), ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] The message "I [MSGID: 139001] [posix-acl.c:263:posix_acl_log_permit_denied] 0-images3-access-control: client: CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:107,gid:107,perm:1,ngrps:3), ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied]" repeated 2 times between [2020-06-21 01:33:45.665888] and [2020-06-21 01:33:45.806779] Thank You For Your Help ! On Sat, Jun 20, 2020 at 8:59 PM C Williams wrote: > Hello, > > Based on the situation, I am planning to upgrade the 3 affected hosts. > > My reasoning is that the hosts/bricks were attached to 6.9 at one time. > > Thanks For Your Help ! > > On Sat, Jun 20, 2020 at 8:38 PM C Williams > wrote: > >> Strahil, >> >> The gluster version on the current 3 gluster hosts is 6.7 (last update >> 2/26). These 3 hosts provide 1 brick each for the replica 3 volume. >> >> Earlier I had tried to add 6 additional hosts to the cluster. Those new >> hosts were 6.9 gluster. >> >> I attempted to make a new separate volume with 3 bricks provided by the 3 >> new gluster 6.9 hosts. After having many errors from the oVirt interface, >> I gave up and removed the 6 new hosts from the cluster. That is where the >> problems started. The intent was to expand the gluster cluster while making >> 2 new volumes for that cluster. The ovirt compute cluster would allow for >> efficient VM migration between 9 hosts -- while having separate gluster >> volumes for safety purposes. >> >> Looking at the brick logs, I see where there are acl errors starting from >> the time of the removal of the 6 new hosts. >> >> Please check out the attached brick log from 6/14-18. The events started >> on 6/17. >> >> I wish I had a downgrade path. >> >> Thank You For The Help !! >> >> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov >> wrote: >> >>> Hi , >>> >>> >>> This one really looks like the ACL bug I was hit with when I updated >>> from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. >>> >>> Did you update your setup recently ? Did you upgrade gluster also ? >>> >>> You have to check the gluster logs in order to verify that, so you can >>> try: >>> >>> 1. Set Gluster logs to trace level (for details check: >>> https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level >>> ) >>> 2. Power up a VM that was already off , or retry the procedure from the >>> logs you sent. >>> 3. Stop the trace level of the logs >>> 4. Check libvirt logs on the host that was supposed to power up the VM >>> (in case a VM was powered on) >>> 5. Check the gluster brick logs on all nodes for ACL errors. >>> Here is a sample from my old logs: >>> >>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:19:41.489047] I >>> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >>> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >>> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >>> req(uid:36,gid:36,perm:1,ngrps:3), ctx >>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >>> [Permission denied] >>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:22:51.818796] I >>> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >>> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >>> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >>> req(uid:36,gid:36,perm:1,ngrps:3), ctx >>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >>> [Permission denied] >>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:24:43.732856] I >>> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >>> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >>> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >>> req(uid:36,gid:36,perm:1,ngrps:3), ctx >>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) >>> [Permission denied] >>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:26:50.758178] I >>> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Hello, Based on the situation, I am planning to upgrade the 3 affected hosts. My reasoning is that the hosts/bricks were attached to 6.9 at one time. Thanks For Your Help ! On Sat, Jun 20, 2020 at 8:38 PM C Williams wrote: > Strahil, > > The gluster version on the current 3 gluster hosts is 6.7 (last update > 2/26). These 3 hosts provide 1 brick each for the replica 3 volume. > > Earlier I had tried to add 6 additional hosts to the cluster. Those new > hosts were 6.9 gluster. > > I attempted to make a new separate volume with 3 bricks provided by the 3 > new gluster 6.9 hosts. After having many errors from the oVirt interface, > I gave up and removed the 6 new hosts from the cluster. That is where the > problems started. The intent was to expand the gluster cluster while making > 2 new volumes for that cluster. The ovirt compute cluster would allow for > efficient VM migration between 9 hosts -- while having separate gluster > volumes for safety purposes. > > Looking at the brick logs, I see where there are acl errors starting from > the time of the removal of the 6 new hosts. > > Please check out the attached brick log from 6/14-18. The events started > on 6/17. > > I wish I had a downgrade path. > > Thank You For The Help !! > > On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov > wrote: > >> Hi , >> >> >> This one really looks like the ACL bug I was hit with when I updated from >> Gluster v6.5 to 6.6 and later from 7.0 to 7.2. >> >> Did you update your setup recently ? Did you upgrade gluster also ? >> >> You have to check the gluster logs in order to verify that, so you can >> try: >> >> 1. Set Gluster logs to trace level (for details check: >> https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level >> ) >> 2. Power up a VM that was already off , or retry the procedure from the >> logs you sent. >> 3. Stop the trace level of the logs >> 4. Check libvirt logs on the host that was supposed to power up the VM >> (in case a VM was powered on) >> 5. Check the gluster brick logs on all nodes for ACL errors. >> Here is a sample from my old logs: >> >> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:19:41.489047] I >> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> req(uid:36,gid:36,perm:1,ngrps:3), ctx >> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission >> denied] >> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:22:51.818796] I >> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> req(uid:36,gid:36,perm:1,ngrps:3), ctx >> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission >> denied] >> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:24:43.732856] I >> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> req(uid:36,gid:36,perm:1,ngrps:3), ctx >> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission >> denied] >> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:26:50.758178] I >> [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] >> 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- >> 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, >> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, >> req(uid:36,gid:36,perm:1,ngrps:3), ctx >> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission >> denied] >> >> >> In my case , the workaround was to downgrade the gluster packages on all >> nodes (and reboot each node 1 by 1 ) if the major version is the same, but >> if you upgraded to v7.X - then you can try the v7.0 . >> >> Best Regards, >> Strahil Nikolov >> >> >> >> >> >> >> В събота, 20 юни 2020 г., 18:48:42 ч. Гринуич+3, C Williams < >> cwilliams3...@gmail.com> написа: >> >> >> >> >> >> Hello, >> >> Here are additional log tiles as well as a tree of the problematic >> Gluster storage domain. During this time I attempted to copy a virtual disk >> to another domain, move a virtual disk to another domain and run a VM where >> the virtual hard disk would be used. >> >> The copies/moves failed and the VM went into pause mode when the virtual >> HDD was involved. >> >> Please check these out. >> >> Thank You For Your Help ! >> >> On Sat, Jun 20, 2020 at 9:54 AM C Wi
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Hi , This one really looks like the ACL bug I was hit with when I updated from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. Did you update your setup recently ? Did you upgrade gluster also ? You have to check the gluster logs in order to verify that, so you can try: 1. Set Gluster logs to trace level (for details check: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level ) 2. Power up a VM that was already off , or retry the procedure from the logs you sent. 3. Stop the trace level of the logs 4. Check libvirt logs on the host that was supposed to power up the VM (in case a VM was powered on) 5. Check the gluster brick logs on all nodes for ACL errors. Here is a sample from my old logs: gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:19:41.489047] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:36,gid:36,perm:1,ngrps:3), ctx (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:22:51.818796] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:36,gid:36,perm:1,ngrps:3), ctx (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:24:43.732856] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:36,gid:36,perm:1,ngrps:3), ctx (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 13:26:50.758178] I [MSGID: 139001] [posix-acl.c:262:posix_acl_log_permit_denied] 0-data_fast4-access-control: client: CTX_ID:4a654305-d2e4- 4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, gfid: be318638-e8a0-4c6d-977d-7a937aa84806, req(uid:36,gid:36,perm:1,ngrps:3), ctx (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, acl:-) [Permission denied] In my case , the workaround was to downgrade the gluster packages on all nodes (and reboot each node 1 by 1 ) if the major version is the same, but if you upgraded to v7.X - then you can try the v7.0 . Best Regards, Strahil Nikolov В събота, 20 юни 2020 г., 18:48:42 ч. Гринуич+3, C Williams написа: Hello, Here are additional log tiles as well as a tree of the problematic Gluster storage domain. During this time I attempted to copy a virtual disk to another domain, move a virtual disk to another domain and run a VM where the virtual hard disk would be used. The copies/moves failed and the VM went into pause mode when the virtual HDD was involved. Please check these out. Thank You For Your Help ! On Sat, Jun 20, 2020 at 9:54 AM C Williams wrote: > Strahil, > > I understand. Please keep me posted. > > Thanks For The Help ! > > On Sat, Jun 20, 2020 at 4:36 AM Strahil Nikolov wrote: >> Hey C Williams, >> >> sorry for the delay, but I couldn't get somw time to check your logs. Will >> try a little bit later. >> >> Best Regards, >> Strahil Nikolov >> >> На 20 юни 2020 г. 2:37:22 GMT+03:00, C Williams >> написа: >>>Hello, >>> >>>Was wanting to follow up on this issue. Users are impacted. >>> >>>Thank You >>> >>>On Fri, Jun 19, 2020 at 9:20 AM C Williams >>>wrote: >>> Hello, Here are the logs (some IPs are changed ) ov05 is the SPM Thank You For Your Help ! On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov >>> wrote: > Check on the hosts tab , which is your current SPM (last column in >>>Admin > UI). > Then open the /var/log/vdsm/vdsm.log and repeat the operation. > Then provide the log from that host and the engine's log (on the > HostedEngine VM or on your standalone engine). > > Best Regards, > Strahil Nikolov > > На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams >>> > написа: > >Resending to eliminate email issues > > > >-- Forwarded message - > >From: C Williams > >Date: Thu, Jun 18, 2020 at 4:01 PM > >Subject: Re: [ovirt-users] Fwd: Issues with Gluster Domain > >To: Strahil Nikolov > > > > > >Here is output from mount > > > >192.168.24.12:/stor/import0 on > >/rhev/data-center
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Strahil, I understand. Please keep me posted. Thanks For The Help ! On Sat, Jun 20, 2020 at 4:36 AM Strahil Nikolov wrote: > Hey C Williams, > > sorry for the delay, but I couldn't get somw time to check your logs. > Will try a little bit later. > > Best Regards, > Strahil Nikolov > > На 20 юни 2020 г. 2:37:22 GMT+03:00, C Williams > написа: > >Hello, > > > >Was wanting to follow up on this issue. Users are impacted. > > > >Thank You > > > >On Fri, Jun 19, 2020 at 9:20 AM C Williams > >wrote: > > > >> Hello, > >> > >> Here are the logs (some IPs are changed ) > >> > >> ov05 is the SPM > >> > >> Thank You For Your Help ! > >> > >> On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov > > > >> wrote: > >> > >>> Check on the hosts tab , which is your current SPM (last column in > >Admin > >>> UI). > >>> Then open the /var/log/vdsm/vdsm.log and repeat the operation. > >>> Then provide the log from that host and the engine's log (on the > >>> HostedEngine VM or on your standalone engine). > >>> > >>> Best Regards, > >>> Strahil Nikolov > >>> > >>> На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams > > > >>> написа: > >>> >Resending to eliminate email issues > >>> > > >>> >-- Forwarded message - > >>> >From: C Williams > >>> >Date: Thu, Jun 18, 2020 at 4:01 PM > >>> >Subject: Re: [ovirt-users] Fwd: Issues with Gluster Domain > >>> >To: Strahil Nikolov > >>> > > >>> > > >>> >Here is output from mount > >>> > > >>> >192.168.24.12:/stor/import0 on > >>> >/rhev/data-center/mnt/192.168.24.12:_stor_import0 > >>> >type nfs4 > >>> > >>> > > >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) > >>> >192.168.24.13:/stor/import1 on > >>> >/rhev/data-center/mnt/192.168.24.13:_stor_import1 > >>> >type nfs4 > >>> > >>> > > >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >192.168.24.13:/stor/iso1 on > >>> >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 > >>> >type nfs4 > >>> > >>> > > >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >192.168.24.13:/stor/export0 on > >>> >/rhev/data-center/mnt/192.168.24.13:_stor_export0 > >>> >type nfs4 > >>> > >>> > > >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >192.168.24.15:/images on > >>> >/rhev/data-center/mnt/glusterSD/192.168.24.15:_images > >>> >type fuse.glusterfs > >>> > >>> > > >>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >192.168.24.18:/images3 on > >>> >/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 > >>> >type fuse.glusterfs > >>> > >>> > > >>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >tmpfs on /run/user/0 type tmpfs > >>> >(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) > >>> >[root@ov06 glusterfs]# > >>> > > >>> >Also here is a screenshot of the console > >>> > > >>> >[image: image.png] > >>> >The other domains are up > >>> > > >>> >Import0 and Import1 are NFS . GLCL0 is gluster. They all are > >running > >>> >VMs > >>> > > >>> >Thank You For Your Help ! > >>> > > >>> >On Thu, Jun 18, 2020 at 3:51 PM Strahil Nikolov > > > >>> >wrote: > >>> > > >>> >> I don't see '/rhev/data-center/mnt/192.168.24.13:_stor_import1' > >>> >mounted > >>> >> at all . > >>> >> What is the status of all storage domains ? > >>> >> > >>> >> Best Regards, > >>> >> Strahil Nikolov > >>> >> > >>> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C Williams > >>> > > >>> >> написа: > >>> >> > Resending to deal with possible email issues > >>> >> > > >>> >> >-- Forwarded message - > >>> >> >From: C Williams > >>> >> >Date: Thu, Jun 18, 2020 at 2:07 PM > >>> >> >Subject: Re: [ovirt-users] Issues with Gluster Domain > >>> >> >To: Strahil Nikolov > >>> >> > > >>> >> > > >>> >> >More > >>> >> > > >>> >> >[root@ov06 ~]# for i in $(gluster volume list); do echo > >$i;echo; > >>> >> >gluster > >>> >> >volume info $i; echo;echo;gluster volume status > >>> >$i;echo;echo;echo;done > >>> >> >images3 > >>> >> > > >>> >> > > >>> >> >Volume Name: images3 > >>> >> >Type: Replicate > >>> >> >Volume ID: 0243d439-1b29-47d0-ab39-d61c2f15ae8b > >>> >> >Status: Started > >>> >> >Snapshot Count: 0 > >>> >> >Number of Bricks: 1 x 3 = 3 > >>> >> >Transport-type: tcp > >>> >> >Bricks: > >>> >> >Brick1: 192.168.24.18:/bricks/brick04/images3 > >>> >> >Brick2: 192.168.24.19:/bricks/brick05/images3 > >>> >> >Brick3: 192.168.24.20:/bricks/brick06/images3 > >>> >> >Options Reconfigured: > >>> >> >performance.client-io-threads: on > >>> >> >nfs.disable: o
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Hey C Williams, sorry for the delay, but I couldn't get somw time to check your logs. Will try a little bit later. Best Regards, Strahil Nikolov На 20 юни 2020 г. 2:37:22 GMT+03:00, C Williams написа: >Hello, > >Was wanting to follow up on this issue. Users are impacted. > >Thank You > >On Fri, Jun 19, 2020 at 9:20 AM C Williams >wrote: > >> Hello, >> >> Here are the logs (some IPs are changed ) >> >> ov05 is the SPM >> >> Thank You For Your Help ! >> >> On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov > >> wrote: >> >>> Check on the hosts tab , which is your current SPM (last column in >Admin >>> UI). >>> Then open the /var/log/vdsm/vdsm.log and repeat the operation. >>> Then provide the log from that host and the engine's log (on the >>> HostedEngine VM or on your standalone engine). >>> >>> Best Regards, >>> Strahil Nikolov >>> >>> На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams > >>> написа: >>> >Resending to eliminate email issues >>> > >>> >-- Forwarded message - >>> >From: C Williams >>> >Date: Thu, Jun 18, 2020 at 4:01 PM >>> >Subject: Re: [ovirt-users] Fwd: Issues with Gluster Domain >>> >To: Strahil Nikolov >>> > >>> > >>> >Here is output from mount >>> > >>> >192.168.24.12:/stor/import0 on >>> >/rhev/data-center/mnt/192.168.24.12:_stor_import0 >>> >type nfs4 >>> >>> >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) >>> >192.168.24.13:/stor/import1 on >>> >/rhev/data-center/mnt/192.168.24.13:_stor_import1 >>> >type nfs4 >>> >>> >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >>> >192.168.24.13:/stor/iso1 on >>> >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 >>> >type nfs4 >>> >>> >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >>> >192.168.24.13:/stor/export0 on >>> >/rhev/data-center/mnt/192.168.24.13:_stor_export0 >>> >type nfs4 >>> >>> >>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >>> >192.168.24.15:/images on >>> >/rhev/data-center/mnt/glusterSD/192.168.24.15:_images >>> >type fuse.glusterfs >>> >>> >>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >>> >192.168.24.18:/images3 on >>> >/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 >>> >type fuse.glusterfs >>> >>> >>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >>> >tmpfs on /run/user/0 type tmpfs >>> >(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) >>> >[root@ov06 glusterfs]# >>> > >>> >Also here is a screenshot of the console >>> > >>> >[image: image.png] >>> >The other domains are up >>> > >>> >Import0 and Import1 are NFS . GLCL0 is gluster. They all are >running >>> >VMs >>> > >>> >Thank You For Your Help ! >>> > >>> >On Thu, Jun 18, 2020 at 3:51 PM Strahil Nikolov > >>> >wrote: >>> > >>> >> I don't see '/rhev/data-center/mnt/192.168.24.13:_stor_import1' >>> >mounted >>> >> at all . >>> >> What is the status of all storage domains ? >>> >> >>> >> Best Regards, >>> >> Strahil Nikolov >>> >> >>> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C Williams >>> > >>> >> написа: >>> >> > Resending to deal with possible email issues >>> >> > >>> >> >-- Forwarded message - >>> >> >From: C Williams >>> >> >Date: Thu, Jun 18, 2020 at 2:07 PM >>> >> >Subject: Re: [ovirt-users] Issues with Gluster Domain >>> >> >To: Strahil Nikolov >>> >> > >>> >> > >>> >> >More >>> >> > >>> >> >[root@ov06 ~]# for i in $(gluster volume list); do echo >$i;echo; >>> >> >gluster >>> >> >volume info $i; echo;echo;gluster volume status >>> >$i;echo;echo;echo;done >>> >> >images3 >>> >> > >>> >> > >>> >> >Volume Name: images3 >>> >> >Type: Replicate >>> >> >Volume ID: 0243d439-1b29-47d0-ab39-d61c2f15ae8b >>> >> >Status: Started >>> >> >Snapshot Count: 0 >>> >> >Number of Bricks: 1 x 3 = 3 >>> >> >Transport-type: tcp >>> >> >Bricks: >>> >> >Brick1: 192.168.24.18:/bricks/brick04/images3 >>> >> >Brick2: 192.168.24.19:/bricks/brick05/images3 >>> >> >Brick3: 192.168.24.20:/bricks/brick06/images3 >>> >> >Options Reconfigured: >>> >> >performance.client-io-threads: on >>> >> >nfs.disable: on >>> >> >transport.address-family: inet >>> >> >user.cifs: off >>> >> >auth.allow: * >>> >> >performance.quick-read: off >>> >> >performance.read-ahead: off >>> >> >performance.io-cache: off >>> >> >performance.low-prio-threads: 32 >>> >> >network.remote-dio: off >>> >> >cluster.eager-lock: enable >>> >> >cluster.quorum-type: auto >>> >> >cluster.server-quorum-type: server >>> >> >cluster.data-self-heal-algorithm: full >>> >> >cluster.lo
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Hello, Was wanting to follow up on this issue. Users are impacted. Thank You On Fri, Jun 19, 2020 at 9:20 AM C Williams wrote: > Hello, > > Here are the logs (some IPs are changed ) > > ov05 is the SPM > > Thank You For Your Help ! > > On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov > wrote: > >> Check on the hosts tab , which is your current SPM (last column in Admin >> UI). >> Then open the /var/log/vdsm/vdsm.log and repeat the operation. >> Then provide the log from that host and the engine's log (on the >> HostedEngine VM or on your standalone engine). >> >> Best Regards, >> Strahil Nikolov >> >> На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams >> написа: >> >Resending to eliminate email issues >> > >> >-- Forwarded message - >> >From: C Williams >> >Date: Thu, Jun 18, 2020 at 4:01 PM >> >Subject: Re: [ovirt-users] Fwd: Issues with Gluster Domain >> >To: Strahil Nikolov >> > >> > >> >Here is output from mount >> > >> >192.168.24.12:/stor/import0 on >> >/rhev/data-center/mnt/192.168.24.12:_stor_import0 >> >type nfs4 >> >> >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) >> >192.168.24.13:/stor/import1 on >> >/rhev/data-center/mnt/192.168.24.13:_stor_import1 >> >type nfs4 >> >> >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >> >192.168.24.13:/stor/iso1 on >> >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 >> >type nfs4 >> >> >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >> >192.168.24.13:/stor/export0 on >> >/rhev/data-center/mnt/192.168.24.13:_stor_export0 >> >type nfs4 >> >> >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >> >192.168.24.15:/images on >> >/rhev/data-center/mnt/glusterSD/192.168.24.15:_images >> >type fuse.glusterfs >> >> >(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >> >192.168.24.18:/images3 on >> >/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 >> >type fuse.glusterfs >> >> >(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >> >tmpfs on /run/user/0 type tmpfs >> >(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) >> >[root@ov06 glusterfs]# >> > >> >Also here is a screenshot of the console >> > >> >[image: image.png] >> >The other domains are up >> > >> >Import0 and Import1 are NFS . GLCL0 is gluster. They all are running >> >VMs >> > >> >Thank You For Your Help ! >> > >> >On Thu, Jun 18, 2020 at 3:51 PM Strahil Nikolov >> >wrote: >> > >> >> I don't see '/rhev/data-center/mnt/192.168.24.13:_stor_import1' >> >mounted >> >> at all . >> >> What is the status of all storage domains ? >> >> >> >> Best Regards, >> >> Strahil Nikolov >> >> >> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C Williams >> > >> >> написа: >> >> > Resending to deal with possible email issues >> >> > >> >> >-- Forwarded message - >> >> >From: C Williams >> >> >Date: Thu, Jun 18, 2020 at 2:07 PM >> >> >Subject: Re: [ovirt-users] Issues with Gluster Domain >> >> >To: Strahil Nikolov >> >> > >> >> > >> >> >More >> >> > >> >> >[root@ov06 ~]# for i in $(gluster volume list); do echo $i;echo; >> >> >gluster >> >> >volume info $i; echo;echo;gluster volume status >> >$i;echo;echo;echo;done >> >> >images3 >> >> > >> >> > >> >> >Volume Name: images3 >> >> >Type: Replicate >> >> >Volume ID: 0243d439-1b29-47d0-ab39-d61c2f15ae8b >> >> >Status: Started >> >> >Snapshot Count: 0 >> >> >Number of Bricks: 1 x 3 = 3 >> >> >Transport-type: tcp >> >> >Bricks: >> >> >Brick1: 192.168.24.18:/bricks/brick04/images3 >> >> >Brick2: 192.168.24.19:/bricks/brick05/images3 >> >> >Brick3: 192.168.24.20:/bricks/brick06/images3 >> >> >Options Reconfigured: >> >> >performance.client-io-threads: on >> >> >nfs.disable: on >> >> >transport.address-family: inet >> >> >user.cifs: off >> >> >auth.allow: * >> >> >performance.quick-read: off >> >> >performance.read-ahead: off >> >> >performance.io-cache: off >> >> >performance.low-prio-threads: 32 >> >> >network.remote-dio: off >> >> >cluster.eager-lock: enable >> >> >cluster.quorum-type: auto >> >> >cluster.server-quorum-type: server >> >> >cluster.data-self-heal-algorithm: full >> >> >cluster.locking-scheme: granular >> >> >cluster.shd-max-threads: 8 >> >> >cluster.shd-wait-qlength: 1 >> >> >features.shard: on >> >> >cluster.choose-local: off >> >> >client.event-threads: 4 >> >> >server.event-threads: 4 >> >> >storage.owner-uid: 36 >> >> >storage.owner-gid: 36 >> >> >performance.strict-o-direct: on >> >> >network.ping-timeout: 30 >> >> >cluster.granular-
[ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
Check on the hosts tab , which is your current SPM (last column in Admin UI). Then open the /var/log/vdsm/vdsm.log and repeat the operation. Then provide the log from that host and the engine's log (on the HostedEngine VM or on your standalone engine). Best Regards, Strahil Nikolov На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams написа: >Resending to eliminate email issues > >-- Forwarded message - >From: C Williams >Date: Thu, Jun 18, 2020 at 4:01 PM >Subject: Re: [ovirt-users] Fwd: Issues with Gluster Domain >To: Strahil Nikolov > > >Here is output from mount > >192.168.24.12:/stor/import0 on >/rhev/data-center/mnt/192.168.24.12:_stor_import0 >type nfs4 >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) >192.168.24.13:/stor/import1 on >/rhev/data-center/mnt/192.168.24.13:_stor_import1 >type nfs4 >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >192.168.24.13:/stor/iso1 on >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 >type nfs4 >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >192.168.24.13:/stor/export0 on >/rhev/data-center/mnt/192.168.24.13:_stor_export0 >type nfs4 >(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) >192.168.24.15:/images on >/rhev/data-center/mnt/glusterSD/192.168.24.15:_images >type fuse.glusterfs >(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >192.168.24.18:/images3 on >/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 >type fuse.glusterfs >(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) >tmpfs on /run/user/0 type tmpfs >(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) >[root@ov06 glusterfs]# > >Also here is a screenshot of the console > >[image: image.png] >The other domains are up > >Import0 and Import1 are NFS . GLCL0 is gluster. They all are running >VMs > >Thank You For Your Help ! > >On Thu, Jun 18, 2020 at 3:51 PM Strahil Nikolov >wrote: > >> I don't see '/rhev/data-center/mnt/192.168.24.13:_stor_import1' >mounted >> at all . >> What is the status of all storage domains ? >> >> Best Regards, >> Strahil Nikolov >> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C Williams > >> написа: >> > Resending to deal with possible email issues >> > >> >-- Forwarded message - >> >From: C Williams >> >Date: Thu, Jun 18, 2020 at 2:07 PM >> >Subject: Re: [ovirt-users] Issues with Gluster Domain >> >To: Strahil Nikolov >> > >> > >> >More >> > >> >[root@ov06 ~]# for i in $(gluster volume list); do echo $i;echo; >> >gluster >> >volume info $i; echo;echo;gluster volume status >$i;echo;echo;echo;done >> >images3 >> > >> > >> >Volume Name: images3 >> >Type: Replicate >> >Volume ID: 0243d439-1b29-47d0-ab39-d61c2f15ae8b >> >Status: Started >> >Snapshot Count: 0 >> >Number of Bricks: 1 x 3 = 3 >> >Transport-type: tcp >> >Bricks: >> >Brick1: 192.168.24.18:/bricks/brick04/images3 >> >Brick2: 192.168.24.19:/bricks/brick05/images3 >> >Brick3: 192.168.24.20:/bricks/brick06/images3 >> >Options Reconfigured: >> >performance.client-io-threads: on >> >nfs.disable: on >> >transport.address-family: inet >> >user.cifs: off >> >auth.allow: * >> >performance.quick-read: off >> >performance.read-ahead: off >> >performance.io-cache: off >> >performance.low-prio-threads: 32 >> >network.remote-dio: off >> >cluster.eager-lock: enable >> >cluster.quorum-type: auto >> >cluster.server-quorum-type: server >> >cluster.data-self-heal-algorithm: full >> >cluster.locking-scheme: granular >> >cluster.shd-max-threads: 8 >> >cluster.shd-wait-qlength: 1 >> >features.shard: on >> >cluster.choose-local: off >> >client.event-threads: 4 >> >server.event-threads: 4 >> >storage.owner-uid: 36 >> >storage.owner-gid: 36 >> >performance.strict-o-direct: on >> >network.ping-timeout: 30 >> >cluster.granular-entry-heal: enable >> > >> > >> >Status of volume: images3 >> >Gluster process TCP Port RDMA Port >Online >> > Pid >> >> >>-- >> >Brick 192.168.24.18:/bricks/brick04/images3 49152 0 Y >> > >> >Brick 192.168.24.19:/bricks/brick05/images3 49152 0 Y >> >6779 >> >Brick 192.168.24.20:/bricks/brick06/images3 49152 0 Y >> >7227 >> >Self-heal Daemon on localhost N/A N/AY >> >6689 >> >Self-heal Daemon on ov07.ntc.srcle.com N/A N/AY >> >6802 >> >Self-heal Daemon on ov08.ntc.srcle.com N/A N/AY >