1 and working. I
got past the storage configuration.
From: Sahina Bose [mailto:sab...@redhat.com]
Sent: Monday, May 2, 2016 11:24 PM
To: Langley, Robert ; users@ovirt.org
Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute
Command that failed to execute from your hosted-engine
Thank you Simone!
-Original Message-
From: Simone Tiraboschi [mailto:stira...@redhat.com]
Sent: Tuesday, May 3, 2016 12:34 AM
To: Langley, Robert
Cc: users@ovirt.org
Subject: Re: [ovirt-users] hosted-engine setup Gluster fails to execute
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert
On Mon, May 2, 2016 at 7:38 PM, Langley, Robert
wrote:
> Hi Sahina,
>
>
>
> Thank you for your response. Let me know if you’ll need any of the log
> before the Storage Configuration section. I looked at this earlier and I was
> wondering why, after choosing to use GlusterFS, there is still referen
Command that failed to execute from your hosted-engine node - "gluster
volume info engine-vol --remote-host gsave0.engine.local"
Can you check the glusterfs versions on the hosted-engine node and
gsave0.engine.local node - are they the same?
On 05/02/2016 11:08 PM, Langley, Robert wrote:
Hi
Correction; I verified and on the Gluster Volume "engine-vol" nfs.disable is
off. Not sure if that is significant or not.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Sahina,
Thank you for your response. Let me know if you'll need any of the log before
the Storage Configuration section. I looked at this earlier and I was wondering
why, after choosing to use GlusterFS, there is still reference to NFS (nfs.py)?
I do believe NFS is disabled in my Gluster con
You will need to provide the hosted-engine setup log to see which
gluster command failed to execute.
On 04/30/2016 10:10 PM, Langley, Robert wrote:
I’m attempting to host the engine within a GlusterFS Replica 3 storage
volume.
During setup, after entering the server and volume, I’m receivin
I'm attempting to host the engine within a GlusterFS Replica 3 storage volume.
During setup, after entering the server and volume, I'm receiving the message
that '/sbin/gluster' failed to execute.
Reviewing the gluster cmd log, it looks as though /sbin/gluster does execute.
I can successfully moun
8 matches
Mail list logo
