Re: [Users] Flush old logs
- Original Message - > From: "Nicolas Ecarnot" > To: users@ovirt.org > Sent: Thursday, February 21, 2013 10:21:15 AM > Subject: Re: [Users] Flush old logs > > Hi, > > This is not a serious issue, just a very small pain in the neck, but > I > can not get rid of this error message : > http://www.zimage.fr/photo.php?id=143945 > > Amongst 2 other nodes, this node is working very well, it can reboot > when asked, its network is perfect, it can handle every order I send, > it > has registered perfectly. > > I took the time to wait for the monthly flush. > I also reduced the threshold delay and waited for the cleanup to > happen. > > So, do I have to dig through the database looking for the precise > flag > to update, or is there some more clever way? > > Regards, > > -- > Nicolas Ecarnot Nicolas Thanks for your waiting and trying all approaches that should clear this message. Please open a oVirt bug for that. If you need to clear this specific message manually, please ping me on the oVirt IRC channel and I will be happy to assist you. Best Regards Eli (emesika on teh oVirt channel) > > Le 22/01/2013 10:41, Nicolas Ecarnot a écrit : > > Hi Eli, > > > > Le 22/01/2013 00:13, Eli Mesika a écrit : > >>> From: "Nicolas Ecarnot" To: users@ovirt.org > >>> Here's a simple question : In the "Alerts" message queue at the > >>> bottom of the screen, I see an error message dating from two > >>> weeks > >>> (about the failure to verify to restart status of a host). I'm > >>> pretty sure this shouldn't be there anymore, as the power > >>> management of this host has already been tested and approved many > >>> times since. > >> > >> Hi Nicolas The Alert should be deleted from the Alert View once > >> you > >> had succeeded to configure & test it successfully If you only > >> configure it without testing or test failed, only the Alert saying > >> that PM is not configured for the Host will be deleted. The > >> message > >> you had noted " failure to verify to restart status of a host" is > >> not > >> the exact one, can you give please the exact message? > > > > "Failed to verify Host x Restart status, Please Restart Host > > x > > manually." > > > > The tests I did on power management, either via the test button, or > > via > > some actions, including power up, reboot, are all reacting well. > > > > I'm close to think there is actually NO problem, except this old > > log msg. > > > >>> I haven't find any trivial way to flush this message queue, and I > >>> was wondering whether it was stored in a database? > >> > >> Yes, it is stored in the database. > >>> > >>> Is there a way to clear these error messages? (Am I right with > >>> the > >>> db location?) > >> > >> The table holding all those messages is called audit_log, deleting > >> from this table manually is not recommended. The table has also a > >> auto-clean mechanism controlled by the AuditLogAgingThreashold > >> configuration value that is set by default to 30 days. this value > >> may > >> be modified using the engine-config tool (requires restart of the > >> engine to take place) > > > > Ok, so either I wait 15 more days for this msg to disapear, either > > I > > find the adequate config command line to shorten it, and restart. > > > > Ok, this is enough for me. Thank you for your explanation. > > > > Regards, > > > > > -- > Nicolas Ecarnot > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Flush old logs
Hi, This is not a serious issue, just a very small pain in the neck, but I can not get rid of this error message : http://www.zimage.fr/photo.php?id=143945 Amongst 2 other nodes, this node is working very well, it can reboot when asked, its network is perfect, it can handle every order I send, it has registered perfectly. I took the time to wait for the monthly flush. I also reduced the threshold delay and waited for the cleanup to happen. So, do I have to dig through the database looking for the precise flag to update, or is there some more clever way? Regards, -- Nicolas Ecarnot Le 22/01/2013 10:41, Nicolas Ecarnot a écrit : Hi Eli, Le 22/01/2013 00:13, Eli Mesika a écrit : From: "Nicolas Ecarnot" To: users@ovirt.org Here's a simple question : In the "Alerts" message queue at the bottom of the screen, I see an error message dating from two weeks (about the failure to verify to restart status of a host). I'm pretty sure this shouldn't be there anymore, as the power management of this host has already been tested and approved many times since. Hi Nicolas The Alert should be deleted from the Alert View once you had succeeded to configure & test it successfully If you only configure it without testing or test failed, only the Alert saying that PM is not configured for the Host will be deleted. The message you had noted " failure to verify to restart status of a host" is not the exact one, can you give please the exact message? "Failed to verify Host x Restart status, Please Restart Host x manually." The tests I did on power management, either via the test button, or via some actions, including power up, reboot, are all reacting well. I'm close to think there is actually NO problem, except this old log msg. I haven't find any trivial way to flush this message queue, and I was wondering whether it was stored in a database? Yes, it is stored in the database. Is there a way to clear these error messages? (Am I right with the db location?) The table holding all those messages is called audit_log, deleting from this table manually is not recommended. The table has also a auto-clean mechanism controlled by the AuditLogAgingThreashold configuration value that is set by default to 30 days. this value may be modified using the engine-config tool (requires restart of the engine to take place) Ok, so either I wait 15 more days for this msg to disapear, either I find the adequate config command line to shorten it, and restart. Ok, this is enough for me. Thank you for your explanation. Regards, -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Flush old logs
Hi Eli, Le 22/01/2013 00:13, Eli Mesika a écrit : From: "Nicolas Ecarnot" To: users@ovirt.org Here's a simple question : In the "Alerts" message queue at the bottom of the screen, I see an error message dating from two weeks (about the failure to verify to restart status of a host). I'm pretty sure this shouldn't be there anymore, as the power management of this host has already been tested and approved many times since. Hi Nicolas The Alert should be deleted from the Alert View once you had succeeded to configure & test it successfully If you only configure it without testing or test failed, only the Alert saying that PM is not configured for the Host will be deleted. The message you had noted " failure to verify to restart status of a host" is not the exact one, can you give please the exact message? "Failed to verify Host x Restart status, Please Restart Host x manually." The tests I did on power management, either via the test button, or via some actions, including power up, reboot, are all reacting well. I'm close to think there is actually NO problem, except this old log msg. I haven't find any trivial way to flush this message queue, and I was wondering whether it was stored in a database? Yes, it is stored in the database. Is there a way to clear these error messages? (Am I right with the db location?) The table holding all those messages is called audit_log, deleting from this table manually is not recommended. The table has also a auto-clean mechanism controlled by the AuditLogAgingThreashold configuration value that is set by default to 30 days. this value may be modified using the engine-config tool (requires restart of the engine to take place) Ok, so either I wait 15 more days for this msg to disapear, either I find the adequate config command line to shorten it, and restart. Ok, this is enough for me. Thank you for your explanation. Regards, -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Flush old logs
- Original Message - > From: "Nicolas Ecarnot" > To: users@ovirt.org > Sent: Monday, January 21, 2013 4:44:02 PM > Subject: [Users] Flush old logs > > Hi, > > I'd like first to thank people of this mailing list for there help > and > advices - I learned a lot by reading your archive. > > Here's a simple question : In the "Alerts" message queue at the > bottom > of the screen, I see an error message dating from two weeks (about > the > failure to verify to restart status of a host). > I'm pretty sure this shouldn't be there anymore, as the power > management > of this host has already been tested and approved many times since. Hi Nicolas The Alert should be deleted from the Alert View once you had succeeded to configure & test it successfully If you only configure it without testing or test failed, only the Alert saying that PM is not configured for the Host will be deleted. The message you had noted " failure to verify to restart status of a host" is not the exact one, can you give please the exact message? > I haven't find any trivial way to flush this message queue, and I was > wondering whether it was stored in a database? Yes, it is stored in the database. > > Is there a way to clear these error messages? > (Am I right with the db location?) The table holding all those messages is called audit_log, deleting from this table manually is not recommended. The table has also a auto-clean mechanism controlled by the AuditLogAgingThreashold configuration value that is set by default to 30 days. this value may be modified using the engine-config tool (requires restart of the engine to take place) > > Regards, > > -- > Nicolas Ecarnot > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Flush old logs
Hi, I'd like first to thank people of this mailing list for there help and advices - I learned a lot by reading your archive. Here's a simple question : In the "Alerts" message queue at the bottom of the screen, I see an error message dating from two weeks (about the failure to verify to restart status of a host). I'm pretty sure this shouldn't be there anymore, as the power management of this host has already been tested and approved many times since. I haven't find any trivial way to flush this message queue, and I was wondering whether it was stored in a database? Is there a way to clear these error messages? (Am I right with the db location?) Regards, -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
