Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
On Thu, May 18, 2017 at 10:03 AM, Sachidananda URS wrote: > Hi, > > On Thu, May 18, 2017 at 7:08 PM, Sahina Bose wrote: > >> >> >> On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo >> wrote: >> >>> Well, I tried both of the following: >>> 1. Having only a boot partition and a PV for the OS that does not take >>> up the entire disk, and then specifying "sda" in Hosted Engine Setup. >>> 2. Having not only a boot partition and a PV for the OS, but also an >>> empty (and not formatted) /dev/sda3 PV that I created with fdisk. >>> Then, specfying "sda3" in Hosted Engine Setup. >>> >>> Both attempts resulted in errors like this: >>> failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": >>> true, "failed_when_result": true, "item": "/dev/sda3", "msg": " >>> Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} >>> >> >> Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log >> >> >>> >>> It seems like having gluster bricks on the same disk as the OS doesn't >>> work at all. >>> >>> > > Hi, /dev/sda3 should work, the error here is possibly due to filesystem > signature. > > Can you please set wipefs=yes? For example > > [pv] > action=create > wipefs=yes > devices=/dev/sda3 > > -sac > > Sorry for the long delay. This worked. Thank you very much. -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
Hi, On Thu, May 18, 2017 at 7:08 PM, Sahina Bose wrote: > > > On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo > wrote: > >> Well, I tried both of the following: >> 1. Having only a boot partition and a PV for the OS that does not take >> up the entire disk, and then specifying "sda" in Hosted Engine Setup. >> 2. Having not only a boot partition and a PV for the OS, but also an >> empty (and not formatted) /dev/sda3 PV that I created with fdisk. >> Then, specfying "sda3" in Hosted Engine Setup. >> >> Both attempts resulted in errors like this: >> failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": >> true, "failed_when_result": true, "item": "/dev/sda3", "msg": " >> Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} >> > > Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log > > >> >> It seems like having gluster bricks on the same disk as the OS doesn't >> work at all. >> >> Hi, /dev/sda3 should work, the error here is possibly due to filesystem signature. Can you please set wipefs=yes? For example [pv] action=create wipefs=yes devices=/dev/sda3 -sac ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo wrote: > Well, I tried both of the following: > 1. Having only a boot partition and a PV for the OS that does not take > up the entire disk, and then specifying "sda" in Hosted Engine Setup. > 2. Having not only a boot partition and a PV for the OS, but also an > empty (and not formatted) /dev/sda3 PV that I created with fdisk. > Then, specfying "sda3" in Hosted Engine Setup. > > Both attempts resulted in errors like this: > failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": > true, "failed_when_result": true, "item": "/dev/sda3", "msg": " > Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} > Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log > > It seems like having gluster bricks on the same disk as the OS doesn't > work at all. > > I am going to buy separate OS SSDs. > > -Mike > > On Tue, May 9, 2017 at 6:22 AM, Mike DePaulo wrote: > > On Mon, May 8, 2017 at 9:00 AM, knarra wrote: > >> On 05/07/2017 04:48 PM, Mike DePaulo wrote: > >>> > >>> Hi. I am trying to follow this guide. Is it possible to use part of my > >>> OS disk /dev/sda for the bricks? > >>> > >>> https://www.ovirt.org/blog/2017/04/up-and-running-with- > ovirt-4-1-and-gluster-storage/ > >>> > >>> I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning > >>> requirements. I am guessing I have to create an LV for the OS that > >>> does not take up the entire disk during install, manually create a pv > >>> like /dev/sda3 afterwards, and then run Hosted Engine Setup and > >>> specify /sda3 rather than sdb? > >>> > >>> Thanks, > >>> -Mike > >>> ___ > >>> Users mailing list > >>> Users@ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >> > >> > >> Hi Mike, > >> > >> If you create gluster bricks on the same disk as OS it works but we > do > >> not recommend setting up gluster bricks on the same disk as the os. When > >> user tries to create a gluster volume using by specifying the bricks > from > >> root partition it displays an error message "Bricks in root parition not > >> recommended and use force at the end to create volume". > >> > >> Thanks > >> > >> kasturi > >> > > > > Thank you very much. Is my process for doing this (listed in my > > original email) correct though? > > > > -Mike > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
Well, I tried both of the following: 1. Having only a boot partition and a PV for the OS that does not take up the entire disk, and then specifying "sda" in Hosted Engine Setup. 2. Having not only a boot partition and a PV for the OS, but also an empty (and not formatted) /dev/sda3 PV that I created with fdisk. Then, specfying "sda3" in Hosted Engine Setup. Both attempts resulted in errors like this: failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": true, "failed_when_result": true, "item": "/dev/sda3", "msg": " Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} It seems like having gluster bricks on the same disk as the OS doesn't work at all. I am going to buy separate OS SSDs. -Mike On Tue, May 9, 2017 at 6:22 AM, Mike DePaulo wrote: > On Mon, May 8, 2017 at 9:00 AM, knarra wrote: >> On 05/07/2017 04:48 PM, Mike DePaulo wrote: >>> >>> Hi. I am trying to follow this guide. Is it possible to use part of my >>> OS disk /dev/sda for the bricks? >>> >>> https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ >>> >>> I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning >>> requirements. I am guessing I have to create an LV for the OS that >>> does not take up the entire disk during install, manually create a pv >>> like /dev/sda3 afterwards, and then run Hosted Engine Setup and >>> specify /sda3 rather than sdb? >>> >>> Thanks, >>> -Mike >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> >> Hi Mike, >> >> If you create gluster bricks on the same disk as OS it works but we do >> not recommend setting up gluster bricks on the same disk as the os. When >> user tries to create a gluster volume using by specifying the bricks from >> root partition it displays an error message "Bricks in root parition not >> recommended and use force at the end to create volume". >> >> Thanks >> >> kasturi >> > > Thank you very much. Is my process for doing this (listed in my > original email) correct though? > > -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
On Mon, May 8, 2017 at 9:00 AM, knarra wrote: > On 05/07/2017 04:48 PM, Mike DePaulo wrote: >> >> Hi. I am trying to follow this guide. Is it possible to use part of my >> OS disk /dev/sda for the bricks? >> >> https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ >> >> I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning >> requirements. I am guessing I have to create an LV for the OS that >> does not take up the entire disk during install, manually create a pv >> like /dev/sda3 afterwards, and then run Hosted Engine Setup and >> specify /sda3 rather than sdb? >> >> Thanks, >> -Mike >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > Hi Mike, > > If you create gluster bricks on the same disk as OS it works but we do > not recommend setting up gluster bricks on the same disk as the os. When > user tries to create a gluster volume using by specifying the bricks from > root partition it displays an error message "Bricks in root parition not > recommended and use force at the end to create volume". > > Thanks > > kasturi > Thank you very much. Is my process for doing this (listed in my original email) correct though? -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
On 05/07/2017 04:48 PM, Mike DePaulo wrote: Hi. I am trying to follow this guide. Is it possible to use part of my OS disk /dev/sda for the bricks? https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning requirements. I am guessing I have to create an LV for the OS that does not take up the entire disk during install, manually create a pv like /dev/sda3 afterwards, and then run Hosted Engine Setup and specify /sda3 rather than sdb? Thanks, -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi Mike, If you create gluster bricks on the same disk as OS it works but we do not recommend setting up gluster bricks on the same disk as the os. When user tries to create a gluster volume using by specifying the bricks from root partition it displays an error message "Bricks in root parition not recommended and use force at the end to create volume". Thanks kasturi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Hosted Engine Setup with the gluster bricks on the same disk as the OS
Hi. I am trying to follow this guide. Is it possible to use part of my OS disk /dev/sda for the bricks? https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/ I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning requirements. I am guessing I have to create an LV for the OS that does not take up the entire disk during install, manually create a pv like /dev/sda3 afterwards, and then run Hosted Engine Setup and specify /sda3 rather than sdb? Thanks, -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users