Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
Unfortunately the new Master Data Domain remained Active only for a few minutes and then the following error was thrown (as it can be seen in the Events tab): Failed to Reconstruct Master Domain for Data Center Afterwards all the other Data Domains became Inactive and the whole Data Center switched to Non Responsive Status. I then tried to activate the Master Data Domain without success. Finally I tried to Re-Initialize Data Center but there was no Data Domain available to become Master so now I can't find a way to Activate the Data Center. Fortunately none of the VMs was affected. What can I do now to re-activate the Data Center? From: sokratis1...@outlook.com To: ih...@redhat.com; mbur...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Date: Tue, 20 Jan 2015 17:21:09 +0200 Sorry I misunderstood it. I dectivated the current Master Domain and the new one was automatically configured so all good! Thanks a lot! Sokratis Date: Tue, 20 Jan 2015 17:00:37 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/20/2015 03:54 PM, s k wrote: I created a new Data Domain (detached from all the DCs) and clicked on 'Re-Initialize Data Center'. Now I'm able to select this Data Domain as the new Master. However when I select it and click OK I get the following error: Error while executing action: Cannot recover Data Center Storage. The relevant Storage Domain's status is Active. as i said earlier, re-init DC is for emergency flow when your DC is down. that's not your case. you just need to deactivate the domain you don't want to be the master domain (deactivate, not detach. you can probably detach if a 3.5 DC, since it support re-attach. in 3.5 DC levels detach means remove all disks/VMs from that domain. Date: Mon, 19 Jan 2015 17:28:06 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/19/2015 04:05 PM, s k wrote: No, all the Storage Domains are attached,they are active and have VMs running on the same DC. re-init DC is for emergency after you lost all your SD's and allows you to choose a data domain not yet attached to any DC. just deactivate the domains you won't won't to be master domains and engine will elect another domain as master. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
I created a new Data Domain (detached from all the DCs) and clicked on 'Re-Initialize Data Center'. Now I'm able to select this Data Domain as the new Master. However when I select it and click OK I get the following error: Error while executing action: Cannot recover Data Center Storage.The relevant Storage Domain's status is Active. Date: Mon, 19 Jan 2015 17:28:06 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/19/2015 04:05 PM, s k wrote: No, all the Storage Domains are attached,they are active and have VMs running on the same DC. re-init DC is for emergency after you lost all your SD's and allows you to choose a data domain not yet attached to any DC. just deactivate the domains you won't won't to be master domains and engine will elect another domain as master. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
On 01/20/2015 03:54 PM, s k wrote: I created a new Data Domain (detached from all the DCs) and clicked on 'Re-Initialize Data Center'. Now I'm able to select this Data Domain as the new Master. However when I select it and click OK I get the following error: Error while executing action: Cannot recover Data Center Storage. The relevant Storage Domain's status is Active. as i said earlier, re-init DC is for emergency flow when your DC is down. that's not your case. you just need to deactivate the domain you don't want to be the master domain (deactivate, not detach. you can probably detach if a 3.5 DC, since it support re-attach. in 3.5 DC levels detach means remove all disks/VMs from that domain. Date: Mon, 19 Jan 2015 17:28:06 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/19/2015 04:05 PM, s k wrote: No, all the Storage Domains are attached,they are active and have VMs running on the same DC. re-init DC is for emergency after you lost all your SD's and allows you to choose a data domain not yet attached to any DC. just deactivate the domains you won't won't to be master domains and engine will elect another domain as master. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
Sorry I misunderstood it. I dectivated the current Master Domain and the new one was automatically configured so all good! Thanks a lot! Sokratis Date: Tue, 20 Jan 2015 17:00:37 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/20/2015 03:54 PM, s k wrote: I created a new Data Domain (detached from all the DCs) and clicked on 'Re-Initialize Data Center'. Now I'm able to select this Data Domain as the new Master. However when I select it and click OK I get the following error: Error while executing action: Cannot recover Data Center Storage. The relevant Storage Domain's status is Active. as i said earlier, re-init DC is for emergency flow when your DC is down. that's not your case. you just need to deactivate the domain you don't want to be the master domain (deactivate, not detach. you can probably detach if a 3.5 DC, since it support re-attach. in 3.5 DC levels detach means remove all disks/VMs from that domain. Date: Mon, 19 Jan 2015 17:28:06 +0200 From: ih...@redhat.com To: sokratis1...@outlook.com; mbur...@redhat.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 On 01/19/2015 04:05 PM, s k wrote: No, all the Storage Domains are attached,they are active and have VMs running on the same DC. re-init DC is for emergency after you lost all your SD's and allows you to choose a data domain not yet attached to any DC. just deactivate the domains you won't won't to be master domains and engine will elect another domain as master. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
- Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 12:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Add the second data domain. Put the first one into maintenance and than detach. The new data domain should automatically become the master one. Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
I already have 4 more data domains configured. The problem is that one of the them is on the same storage device and I want to ensure it will not become the Master Data Domain. Is that possible or should I detach this one as well? Date: Mon, 19 Jan 2015 06:31:21 -0500 From: stira...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 12:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Add the second data domain. Put the first one into maintenance and than detach. The new data domain should automatically become the master one. Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
No, all the Storage Domains are attached,they are active and have VMs running on the same DC. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
On 01/19/2015 04:05 PM, s k wrote: No, all the Storage Domains are attached,they are active and have VMs running on the same DC. re-init DC is for emergency after you lost all your SD's and allows you to choose a data domain not yet attached to any DC. just deactivate the domains you won't won't to be master domains and engine will elect another domain as master. Date: Mon, 19 Jan 2015 08:01:16 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 So that means you have configured your other storage domains under another DC, but you haven't configured them on the relevant DC, cause 'There are no compatible Storage Domains to attach to this Data Center' Or they are Detached from DC. - Original Message - From: s k sokratis1...@outlook.com To: Michael Burman mbur...@redhat.com Cc: users@ovirt.org Sent: Monday, January 19, 2015 2:32:10 PM Subject: RE: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 When I click on 'Re-Initialize Data Center' I get the following message: There are no compatible Storage Domains to attach to this Data Center. Please add new Storage from the Storage tab. Date: Mon, 19 Jan 2015 07:02:28 -0500 From: mbur...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0
Hi Sokratis, You can go to Data Center main tab, choose relevant DC, click right click on the DC, choose 'Re-Initialize Data Center', in this window you can choose another compatible Storage Domain and choose him to be your master Data Storage Domain. Michael B - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, January 19, 2015 1:06:08 PM Subject: [ovirt-users] Remove Master Data Domain in oVirt 3.5.0 Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Remove Master Data Domain in oVirt 3.5.0
Hello, I would like to remove the Master Data Domain because I need to decommission the underlying storage device. Is there a way to manually change the Master Data Domain? Will the Master Data Domain be reassigned automatically when the current one is deleted? Thank you, Sokratis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users