After a days google, trial and error, I finally realised that the person who
migrated the website from linux to Windows did not change the paths in
catalina.policy.
I got a fresh copy of catalina.policy from Tomcat 5 installation and re-add my
bits of security settings and it is working now.
C
Good day!
For testing purposes I have setup a website to run in Tomcat 5, Tomcat 6, and
Tomcat 7.
The site runs on Windows Server 2008 R2, and I used the service.bat to install
the windows service so that I can start and stop the site.
When it came to enable the security manager, I read from t
On Thu, 12 May 2011 01:16:43 +0400
Konstantin Kolinko wrote:
> 1) jsvc is not developed within Apache Tomcat project but within the
> Apache Commons - it belongs to Apache Commons Daemon, -- your
> question belongs there
> http://commons.apache.org/daemon/
Thanks! I'll subscribe there and re-po
Thanks Chris. Not as simple as I'd hoped, about as complicated as I expected
:-)
-Original Message-
From: Christopher Schultz [mailto:ch...@christopherschultz.net]
Sent: Thursday, 12 May 2011 1:56 a.m.
To: Tomcat Users List
Subject: Re: How to close all connections in a Tomcat container
1) jsvc is not developed within Apache Tomcat project but within the
Apache Commons - it belongs to Apache Commons Daemon, -- your question
belongs there
http://commons.apache.org/daemon/
2) This appears to be specific to Solaris - this issue in relation
with Solaris was asked several times here a
Sorry guys ive been not so clear. here's the deal , ill explain the whole
process trying to resume so nobody gets bored reading :)
final images are 400x300px (sometimes png, sometimes jpg) containing pie
charts, bar charts, etc. The webapp is constantly connected getting information
from a pbx
So sorry...
i was thinking about a portuguese list... shame on me...
sorry list!!!
i will read the e-mail bellow and tell about it in few minutes...
Em 11 de maio de 2011 17:39, chris derham escreveu:
> >
> >
> > é a primeira vez que preciso configurar o log4j e estou completamente
> > perdi
>
>
> é a primeira vez que preciso configurar o log4j e estou completamente
> perdido...
>
> a versão do jboss utilizada aqui é a AS6 e para piorar minha vida quase
> tudo
> que eu encontro na net é da versão antiga, onde o arquivo de configuração é
> diferente, assim como toda a configuração inter
On Tue, 10 May 2011 16:27:54 -0400
James Seymour wrote:
> Following-up to myself...
[snip]
24 hours and no takers. Can I safely assume, from that, that I best
find another solution?
Regards,
Jim
--
Note: My mail server employs *very* aggressive anti-spam
filtering. If you reply to this email
Olá amigos,
é a primeira vez que preciso configurar o log4j e estou completamente
perdido...
a versão do jboss utilizada aqui é a AS6 e para piorar minha vida quase tudo
que eu encontro na net é da versão antiga, onde o arquivo de configuração é
diferente, assim como toda a configuração interna,
Assume you have TC7 installed and configured.1. put a any jar to your separate
local path, such as /home/foo/lib/food.jar2. edit
$CATALINA_HOME/conf/catalina.properties to apend "${foo.bar}/lib/food.jar" to
common.loader property3, setenv JAVA_OPTS -Dfoo.bar=/home/foo4. start TC7, then
stop TC
I'll try.. thanks :]
2011/5/11 Christopher Schultz
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> הילה,
>
> On 5/11/2011 3:10 PM, הילה wrote:
> > I've read this presentation, but I'm a system engineer, not an
> application
> > programmer.. so it didn't help me much. i'm trying to help th
I would love to see that happen. thanks.
> Date: Wed, 11 May 2011 10:01:48 -0400
> From: ch...@christopherschultz.net
> To: users@tomcat.apache.org
> Subject: Re: tomcat 7: common.loader property in catalina.properties does not
> take ANT style variable
>
> -BEGIN PGP SIGNED MESSAGE-
>
Hi,
I use Apache httpd in front of Tomcat to do this type of thing on both *nix
and Windows. I can configure Apache virtual hosts that map to Tomcat virtual
hosts, forward requests to different instances on different ports or
whatever request redirection that is needed. I also use it to handle loa
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
הילה,
On 5/11/2011 3:10 PM, הילה wrote:
> I've read this presentation, but I'm a system engineer, not an application
> programmer.. so it didn't help me much. i'm trying to help the application
> guys out, which for now doesn't think it's a leak from
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian,
On 5/11/2011 2:24 PM, Brian Braun wrote:
> First, I will implement the parallel deployment, so my redeployments wont
> cause unavailability. Then, with a little bit of time and as soon as I have
> two separate Tomcats and a load balancer, I wil
I've read this presentation, but I'm a system engineer, not an application
programmer.. so it didn't help me much. i'm trying to help the application
guys out, which for now doesn't think it's a leak from the application..
so.. could you please explain how can it be checked?..
Thanks
Hila
2011/5
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian,
On 5/11/2011 2:35 PM, Brian Braun wrote:
> In Linux I have have more than one instance of Tomcat in the same Linux
> instance. It is as easy as installing each Tomcat with a different port
> (lets say, 8081 and 8082), and using IPTables NAT (an
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alexis,
On 5/6/2011 12:37 PM, alexis wrote:
> small images (never more than 35kB) in a LAN. :)
Martin's comment was, as usual, off-topic and hot terribly helpful.
Martin, use of the JAI doesn't have anything to do with bandwidth unless
you think tha
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alexis,
On 5/6/2011 10:52 AM, alexis wrote:
> I understand, but i have top 12 images of 35kbytes, no more.
Fair enough.
> Encoding load is an issue yes, but the images are reflecting
> callcenters call queues and some stuff related so the need to re
On 05/11/2011 08:35 PM, Brian Braun wrote:
IPTables NAT
Check the
http://www.quantumg.net/portforward.php
It's a single .cpp file if you don't need gui.
There is also more advanced (ipfilter like util)
http://www.hsc.fr/ressources/outils/pktfilter/
Think that you can even use PuTTY for that.
Hi,
In Linux I have have more than one instance of Tomcat in the same Linux
instance. It is as easy as installing each Tomcat with a different port
(lets say, 8081 and 8082), and using IPTables NAT (and Tomcat host
virtualization) to redirect some domains to some hosts inside a certain
Tomcat, and
Hi Chris,
I agree with you.
First, I will implement the parallel deployment, so my redeployments wont
cause unavailability. Then, with a little bit of time and as soon as I have
two separate Tomcats and a load balancer, I will forget about the parallel
deployment because, as you said, the other so
> From: Christopher Schultz
> To: Tomcat Users List
> Cc:
> Sent: Wednesday, May 11, 2011 7:06 AM
> Subject: Re: What the packages needed to install tomcat5 core using yum in
> Fedora 14
>
> Varuna,
>
> On 5/9/2011 9:48 PM, Varuna Seneviratna wrote:
>> What the packages needed to install tom
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Micka,
On 5/8/2011 2:44 PM, Micka wrote:
> System.out.println("test 1");
> *Connection dconn = ((DelegatingConnection) conn).getInnermostDelegate();*
> *<== HERE*
> System.out.println("test 2");
>
> ((org.postgresql.PGConnection)dconn).addDataType("
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gary,
On 5/10/2011 4:33 PM, Gary Weaver wrote:
> Chris,
>
> On Tue, May 10, 2011 at 4:06 PM, Christopher Schultz <
> ch...@christopherschultz.net> wrote:
>
>>
>> http://people.apache.org/~markt/presentations/2010-11-04-Memory-Leaks-60mins.pdf
>
> Than
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Varuna,
On 5/9/2011 9:48 PM, Varuna Seneviratna wrote:
> What the packages needed to install tomcat5 core using yum
Isn't the point of a package manager to indicate and resolve dependencies?
Can't 'yum' tell you what Fedora packages are required? If
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Konstantin,
On 5/10/2011 4:50 PM, Konstantin Kolinko wrote:
> 2011/5/11 Christopher Schultz :
>> On 5/10/2011 3:05 AM, Konstantin Kolinko wrote:
>>> IIRC, catalina.properties file does not support substitution for
>>> anything, besides those two speci
Thank you Christopher,
I'll put it up, verify and let you know on the same!! Once again Thanks!
On Wed, May 11, 2011 at 7:07 PM, Christopher Schultz <
ch...@christopherschultz.net> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Joji,
>
> On 5/11/2011 3:15 AM, Joji V J wrote:
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
הילה,
On 5/10/2011 4:45 PM, הילה wrote:
> 2011/5/10 Christopher Schultz :
>>
>> "You should check to see if your webapp is leaky across webapp restarts
>> (with Tomcat continuing to run) because you could bringing-down the JVM
>> if your webapp does n
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dale,
On 5/10/2011 7:24 PM, Dale Ogilvie wrote:
> The cause of the error was the db admin patching a db package underlying
> one used by our web-app. Post patch all the packages appeared valid to
> the admin, but not to our app using db connections es
Christopher Schultz> So, you want to /only/ escape those entities that
are /absolutely
Christopher Schultz> required/ to be escaped?
Yes.
Christopher Schultz> I'm not sure anyone really cares what URLs look
like, do they?
Konstantin Kolinko> readability? nobody reads the HTML source
Search engin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 5/11/2011 3:11 AM, chateau Xiao wrote:
> for the necessary of debug. I need the thread dump information like below to
> show me the threads running status.
>
> [snip]
>
> I usually use kill -3 or jstack to satisify my requirement. when
> things
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joji,
On 5/11/2011 3:15 AM, Joji V J wrote:
> Since few days I've noticed that some of the applications in the server
> are using the device manager based database connections, causing too many
> open connections with the database. Unfortunately I'm i
2011/5/11 Mindaugas Žakšauskas :
> On Tue, May 10, 2011 at 7:31 PM, Christopher Schultz
> wrote:
>> <..>
>> What about http://site/test1%28test2/
>>
>> Does that give you "/test1)test2/"?
>
> Closing bracket is %29 but yes, it does.
>
>> If so, Tomcat is probably following SOP with regard to stand
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mindaugas,
On 5/11/2011 9:16 AM, Mindaugas Žakšauskas wrote:
> On Tue, May 10, 2011 at 7:31 PM, Christopher Schultz
> wrote:
>> <..>
>> What about http://site/test1%28test2/
>>
>> Does that give you "/test1)test2/"?
>
> Closing bracket is %29 but ye
binLmaU7goP1J.bin
Description: PGP/MIME version identification
On Tue, May 10, 2011 at 7:31 PM, Christopher Schultz
wrote:
> <..>
> What about http://site/test1%28test2/
>
> Does that give you "/test1)test2/"?
Closing bracket is %29 but yes, it does.
> If so, Tomcat is probably following SOP with regard to standards which
> is to be conservative in what you
On 5/10/11 8:55 PM, Gary Weaver wrote:
> Here's what I did and what little I came up with:
> http://stufftohelpyouout.blogspot.com/2011/05/diagnosing-webappportlet-hot-deploy.html
>
> I'm definitely not an expert at diagnosing leaks, so if you have any
> recommendations/comments, please let me kno
Hi!!
I've found the problem, the params SSLCertificateFile and
SSLCertificateKeyFile were changed.
Now I'm not having any error on startup.
Thanx for all =)
2011/5/11 Goo Sam Kong
> Hi,
>
> If you use APR, the private key & certificate should be in PEM format as
> documented in http://tomcat.a
Hi,
If you use APR, the private key & certificate should be in PEM format as
documented in http://tomcat.apache.org/tomcat-5.5-doc/apr.html#HTTPS
*SSLCertificateFile*
Name of the file that contains the server certificate. The format is
PEM-encoded.
SSLCertificateKeyFile
Name of the file that c
Hi again,
I followed many docs, the Tomcat's official web was not clear enough for me.
With SSLEngine="on" I'm having this problem:
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed:
java.lang.Exception: Unable to load certificate key
/opt/apache-tomcat-5.5.33/con
Hello Friends,
Since few days I've noticed that some of the applications in the server
are using the device manager based database connections, causing too many
open connections with the database. Unfortunately I'm in no position to
instruct them to use the tomcat based datasource connections. S
hi all:
for the necessary of debug. I need the thread dump information like below to
show me the threads running status.
Full thread dump Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode):
"Attach Listener" daemon prio=10 tid=0x01f55000 nid=0x4726 runnable
[0x]
j
44 matches
Mail list logo
