On 10/26/2020 8:42 AM, TomK wrote:
On 10/26/2020 2:10 AM, Michael Schwartzkopff wrote:
On 26.10.20 05:47, TomK wrote:
Hey All,
I've configured the VTI's and routing is now fully working between the
9 VLAN's.
XFRM, as far as I can tell, isn't as well documented. I might try
this later on o
On 10/26/2020 2:10 AM, Michael Schwartzkopff wrote:
On 26.10.20 05:47, TomK wrote:
Hey All,
I've configured the VTI's and routing is now fully working between the
9 VLAN's.
XFRM, as far as I can tell, isn't as well documented. I might try
this later on o see if OpenWRT supprots it.
Thx,
On
On 26.10.20 05:47, TomK wrote:
> Hey All,
>
> I've configured the VTI's and routing is now fully working between the
> 9 VLAN's.
>
> XFRM, as far as I can tell, isn't as well documented. I might try
> this later on o see if OpenWRT supprots it.
>
> Thx,
>
> On 10/25/2020 9:48 PM, TomK wrote:
>>
Hello Tom,
That is the right wiki page.
What I forgot to mention though is that with interfaces, you can then talk your
routing protocol over it.
It does not give you information about the subnets though for which IPsec
policies are installed.
What is the goal of this in the end?
Kind regards
Hey All,
I've configured the VTI's and routing is now fully working between the 9
VLAN's.
XFRM, as far as I can tell, isn't as well documented. I might try this
later on o see if OpenWRT supprots it.
Thx,
On 10/25/2020 9:48 PM, TomK wrote:
Hey Noel,
I have four VLAN's on the Azure
Hey Noel,
I have four VLAN's on the Azure side. I need all these VLAN's visible
to my on-prem VLAN's, 5 on-prem VLAN's in total. The on-prem GW can see
those Azure VLAN's. The mapping works well.
However, the on-prem StrongSwan GW running on my Raspberry Pi 2
(OpenWRT) isn't
Hi Tom,
The routes in table 220 are only used to tell the kernel which source IP to use
for sending packets to a remote network.
They aren't part of XFRM and only tangentially pertain IPsec.
Also, routes are only added if they are required, so those routes in table 220
are not necessarily
Hey Noel,
Thanks. That would certainly make it automatic with either BIRD or
Quagga.
I'll have a look at the pages again to see what it takes to create
these. Thinking this is still the right page for VTI and XFRM information?
That's certainly an option I've reviewed. Whatever the option, would
like to keep customization to nothing, if possible.
Cheers,
TK
On 10/25/2020 3:03 PM, Volodymyr Litovka wrote:
Hi,
if it's option, you can consider Bird, which can import from specified
table -
Hi,
if it's option, you can consider Bird, which can import from specified
table - https://bird.network.cz/?get_doc=20=bird-6.html#ss6.6 :
|kernel table /number/|
Select which kernel table should this particular instance of the
Kernel protocol work with. Available only on systems
10 matches
Mail list logo