Hi all
I currently have a non-operational second node in my "ovirt 4.0
hosted-engine" installation running on Centos7, kernel
3.10.0-514.10.2.el7.x86_64.
When I ran "hosted-engine --deploy" on the second node, it produce the
following error(see bottom of email).
I now cannot set the second node
dear ovirt user community,
I can't sort out an ovirt issue I got with cinder for weeks, I hope
someone could give me a clue...
From mi ovirt manager 4.1, I can create and delete a cinder volume or
attach and detach a cider vomume from an ovirt VM.
The problem is I never had been able to laun
I didn't see any parameter at the current ansible documentation related
with these features. How can i set these feature if i am using ansible? Any
possibility to set them via SDK after the vm is opened via ansible?
On Wed, Mar 8, 2017 at 8:46 AM, Oved Ourfali wrote:
> The VM leases feature is a
Hello,
this morning I get these two messages regarding bond1 and its active
interface on one host (ovmsrv07):
Host ovmsrv07 has network interface which exceeded the defined threshold
[95%] (bond1: transmit rate[96%], receive rate [0%])
Host ovmsrv07 has network interface which exceeded the define
How to verify this?
In the RHEM GUI storage -> -> Manage domain I can see all
fourt target names,
but mabye there is only present state and I shoud verify something else in
the database or wherever?
Where is the info about iSCSI hosted-engine storage target IP,
about other storages information i
On 03/08/2017 10:08 AM, Oğuz Yarımtepe wrote:
> I didn't see any parameter at the current ansible documentation related
> with these features. How can i set these feature if i am using ansible?
> Any possibility to set them via SDK after the vm is opened via ansible?
>
The target storage domain f
I found the configuration file /etc/ovirt-hosted-engine/hosted-engine.conf
with field sotrage=.
Is it possible to change the value above to put four IP there (four array
interfaces IP)?
2017-03-08 10:58 GMT+01:00 Marcin Kruk :
> How to verify this?
> In the RHEM GUI storage -> -> Manage domain
Hello,
I have to move some VMs from FCP based storage domain to iSCSI based
storage domain.
Can I do it offline or online keeping in mind that:
Host1, Host2 have access only to the FCP SD
Host3, Host4 have access only to the iSCSI SD
They are all managed by the same engine in the same DC but in d
On Wed, Mar 8, 2017 at 10:04 AM, herve wrote:
> dear ovirt user community,
>
> I can't sort out an ovirt issue I got with cinder for weeks, I hope someone
> could give me a clue...
> From mi ovirt manager 4.1, I can create and delete a cinder volume or attach
> and detach a cider vomume from an ov
On Sat, Mar 4, 2017 at 12:04 PM, Stefano Stagnaro <
stefa...@prismatelecomtesting.com> wrote:
> Hi guys,
>
> I've started an oVirt 4.1 HE deployment on a Broadwell based server. Then
> I added to HE a second, older host based on Nehalem. I've downgraded the
> cluster CPU type to Nehalem to accommo
Thanks a lot!
I beleived lvm backend was much easier to implement than ceph an
obviously should work if ceph was supported...
that was my mistake
Regarding the behvior I got the backend lvm is almost working anyway - )
I could have been searching during a lot of time ... I'm going to try
Hi,
Storage domains are per Data Center, and all hosts in this DC should be
able to access the SDs, no matter in which cluster they are...
Are you sure your hosts are on the same DC ?
Thanks,
Freddy
On Wed, Mar 8, 2017 at 12:57 PM, Gianluca Cecchi
wrote:
> Hello,
> I have to move some VMs fr
On Wed, Mar 8, 2017 at 1:02 PM, Sandro Bonazzola
wrote:
>
>
> On Sat, Mar 4, 2017 at 12:04 PM, Stefano Stagnaro prismatelecomtesting.com> wrote:
>
>> Hi guys,
>>
>> I've started an oVirt 4.1 HE deployment on a Broadwell based server. Then
>> I added to HE a second, older host based on Nehalem. I
According to not hosted-engine storage, I found the
"storage_server_connections" and "lun_storage_server_connnection_map"
tables.
Is it possible to insert there rows with info about my extra iSCSI
connections?
2017-03-08 11:45 GMT+01:00 Marcin Kruk :
> I found the configuration file /etc/ovirt-ho
Hello.
I'm running oVirt-Node *4.1.0--0.20170201.0+1* on my hosts and tried a
normal upgrade. It detected it has to upgrade to
*4.1.1-0.3.rc1.20170303133657.git20d3594.el7.centos* from the
ovirt-4.1-pre repository.
The upgrade finished with the following problems:
...
Running transaction
Hello,
i have a oVirt 4.1 setup attached to an openstack newton. I imported a
network from my openstack setup without issues.
I attached a VM to that network, but dhcp isn't working. Tried setting
fixed ip, but still not working. I've seen a new qbr* bridge appeared
and so tried to tcpdump on it.
On Wed, Mar 8, 2017 at 1:30 PM, Fred Rolland wrote:
> Hi,
>
> Storage domains are per Data Center, and all hosts in this DC should be
> able to access the SDs, no matter in which cluster they are...
>
> Are you sure your hosts are on the same DC ?
>
> Thanks,
>
> Freddy
>
>
No, my scenario was a
Thanks Arsène
Just for others benefit just adding the repository and installing the
agent won't work. Need to add it to SELINUX. For that I used the
following command:
semodule -i zabbix_agent_setrlimit.pp
Fernando
On 07/03/2017 05:42, Arsène Gschwind wrote:
Hi Fernando,
We do monitor ou
Hi Eduardo,
DWH still exists, and if you have a reports tool that supports sql you can
use it with it.
Reports was deprecated in 3.6.
We are now working on adding a new metrics store solution for oVirt.
For more details you can have a look at:
http://www.ovirt.org/develop/release-management/feat
Hi,
You can also monitor by enabling SNMP in Hosts. For this purpose, using
the MIB, you need to build a Zabbix Template as detailed in the link
here https://github.com/jensdepuydt/zabbix-ovirt
We are monitoring Version Hosts with CentOS 7 and oVirt 4.0.x using this
method.
I will share th
Pavel Gashev writes:
> It's not applied yet. However it looks like it's under review right now:
> https://lists.freedesktop.org/archives/spice-devel/2017-March/036355.html
Nice. Glad to know it only takes 4 years for a patch to get reviewed...
;-)
-d
--
Derek Atkins 61
I cannot think of another option other to have an export domain in the
middle that can be accessed from all the hosts.
On Wed, Mar 8, 2017 at 3:50 PM, Gianluca Cecchi
wrote:
> On Wed, Mar 8, 2017 at 1:30 PM, Fred Rolland wrote:
>
>> Hi,
>>
>> Storage domains are per Data Center, and all hosts
Hi,
Below is my playbook
---
- name: Setup oVirt environment
hosts: vms
tasks:
- block:
- name: Include oVirt password
#no_log: true
include_vars: vars.yml
- name: Obtain SSO token
no_log: true
ovirt_auth:
url: "{{ url }
Thanks for your answer!
Looks certainly interesting. I am using collectd with virt plugin +
carbon + graphite + grafana for performance graphs of the hosts and the
VMs right now ( oVirt 4.1 with nodes in CentOS 7.3)
I like the idea of using fluentd for this instead of a relational
database. Will
On 03/08/2017 03:44 PM, Oğuz Yarımtepe wrote:
> Hi,
>
> Below is my playbook
>
> ---
> - name: Setup oVirt environment
> hosts: vms
> tasks:
> - block:
> - name: Include oVirt password
> #no_log: true
> include_vars: vars.yml
>
> - name: Obtain SSO tok
On Wed, Mar 8, 2017 at 3:44 PM, Oğuz Yarımtepe
wrote:
> Hi,
>
> Below is my playbook
>
> ---
> - name: Setup oVirt environment
> hosts: vms
> tasks:
> - block:
> - name: Include oVirt password
> #no_log: true
> include_vars: vars.yml
>
> - name: Obtain
On Wed, Mar 8, 2017 at 10:08 AM, Oğuz Yarımtepe
wrote:
> I didn't see any parameter at the current ansible documentation related
> with these features. How can i set these feature if i am using ansible? Any
> possibility to set them via SDK after the vm is opened via ansible?
>
This is indeed no
On Wed, Mar 8, 2017 at 3:33 PM, Fred Rolland wrote:
> I cannot think of another option other to have an export domain in the
> middle that can be accessed from all the hosts.
>
>
> On Wed, Mar 8, 2017 at 3:50 PM, Gianluca Cecchi > wrote:
>
>> On Wed, Mar 8, 2017 at 1:30 PM, Fred Rolland wrote:
Hello,
it seems that on my Fedora 25 I'm able to find only ovirt-engine-sdk-python
that is 3.6.9.1
What should I execute to get sdk 4 on Fedora 25?
Can I have both the sdk 3 and 4 for test an a single machine?
Thanks in advance,
Gianluca
___
Users mailin
On Tue, Feb 7, 2017 at 6:05 PM, Beckman, Daniel <
daniel.beck...@ingramcontent.com> wrote:
> We’re been using oVirtBackup with our oVirt 4.0.5 environment and it’s
> worked well. It’s not the most efficient ( first creates a snapshot, then
> clone, then backup) but we can live with it.
>
>
>
> Has
On 03/08/2017 05:58 PM, Gianluca Cecchi wrote:
> Hello,
> it seems that on my Fedora 25 I'm able to find
> only ovirt-engine-sdk-python that is 3.6.9.1
> What should I execute to get sdk 4 on Fedora 25?
> Can I have both the sdk 3 and 4 for test an a single machine?
>
> Thanks in advance,
> Gianlu
On 8 March 2017 at 19:07, Juan Hernández wrote:
>
> The best way to get the latest versions of those packages is to install
> the oVirt release RPM:
>
> dnf install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm
>
> Then install the required packages. The names of the packages are
>
On 03/08/2017 06:15 PM, Barak Korren wrote:
> On 8 March 2017 at 19:07, Juan Hernández wrote:
>>
>> The best way to get the latest versions of those packages is to install
>> the oVirt release RPM:
>>
>> dnf install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm
>>
>> Then install t
Le 08/03/2017 à 18:17, Juan Hernández a écrit :
On 03/08/2017 06:15 PM, Barak Korren wrote:
On 8 March 2017 at 19:07, Juan Hernández wrote:
The best way to get the latest versions of those packages is to install
the oVirt release RPM:
dnf install http://resources.ovirt.org/pub/yum-repo/o
Hi Folks !
I am looking for a documentation for ovirt-engine-sdk-python-4.1 but could
not find anything yet. Looks like there are many changes compared to 4.0.
Can anyone help me about how to clone a VM from a snapshot using the latest
sdk ?
Thank you !
--
Niyazi Elvan
__
On 03/08/2017 06:23 PM, Nathanaël Blanchet wrote:
>
>
> Le 08/03/2017 à 18:17, Juan Hernández a écrit :
>> On 03/08/2017 06:15 PM, Barak Korren wrote:
>>> On 8 March 2017 at 19:07, Juan Hernández wrote:
The best way to get the latest versions of those packages is to install
the oVirt r
On 03/08/2017 06:53 PM, Niyazi Elvan wrote:
> Hi Folks !
>
> I am looking for a documentation for ovirt-engine-sdk-python-4.1 but
> could not find anything yet. Looks like there are many changes compared
> to 4.0.
>
Version 4.1 of the SDK isn't very different for version 4.0. It is very
differen
Hello Juan !
Thank you very much ! I am quite new to ovirt sdk and I really appreciate
your help.
** with 4.0 I actually meant 3.6 , my typo :)
On Wed, Mar 8, 2017 at 9:18 PM, Juan Hernández wrote:
> On 03/08/2017 06:53 PM, Niyazi Elvan wrote:
> > Hi Folks !
> >
> > I am looking for a doc
Hi all
I need to shrink/reduce the size of a gluster logical volume under Ovirt
4.0.
Is there anything I should be aware of before reducing the file system and
logical volume on my servers?
I ask because I see under "df -h" the following;
192.168.3.10:data 5.7T 3.4G 5.7T 1%
/rhev/data-cent
Hello,
I'm using oVirt and recently added backup functionality using this script:
https://github.com/wefixit-AT/oVirtBackup
This script runs every day from cron, but i noticed very bad behavior
with the machines. Script on some stage pauses them, and it leads to
problems. I have NTP stratum 2 se
I noticed similar behavior, I think if the memory state isn't backed-up
then the machines won't be paused.
Not seen an option in script to 'flip' the flag, but then again I haven't
looked at the script in enough detail to see what needs changing.
On 9 March 2017 at 06:11, Misak Khachatryan wrote:
Are you shrinking the gluster volume by removing bricks, or are you
shrinking the underlying LV/filesystem of the bricks associated with
gluster volume?
If latter, you need to move storage domain to maintenance and umount from
all hosts.
On Thu, Mar 9, 2017 at 4:56 AM, Ian Neilsen wrote:
>
> Hi
Hi, all
I have noticed that kvm supports host-only network mode. So I want to
know how to create a host-only vinc for a virtual machine in ovirt.
Anyone can help? Thanks!
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailm
Yes, pip repo has 2.2. will use the add_vm_nic.py for now.
On Wed, Mar 8, 2017 at 5:07 PM, Ondra Machacek wrote:
>
>
> On Wed, Mar 8, 2017 at 3:44 PM, Oğuz Yarımtepe
> wrote:
>
>> Hi,
>>
>> Below is my playbook
>>
>> ---
>> - name: Setup oVirt environment
>> hosts: vms
>> tasks:
>> - bl
44 matches
Mail list logo