[ovirt-users] Re: Retrieval of iSCSI targets failed.

On Fri, Feb 8, 2019 at 2:07 AM wrote: > Hello! > > I was just trying to setup my first oVirt Server via Cockpit but it failed > when I wanted to connect it to my iSCSI. > > These are the last lines of my vdsm.log: > 2019-02-08 01:34:07,080+0100 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC >

[ovirt-users] Re: Forum available

Le 08/02/2019 à 09:05, Josep Manel Andrés Moscardó a écrit : Hi all, I am just wondering if anyone like me would like to have everything that is bump here in a forum, with all the benefits it brings Absolutely. Digging through mail archives is somethimes painful. (and people will still be

[ovirt-users] Can not log to engine manager after creating a clone

Hello, Fresh 4.3 Cluster : I imported a 4.2 export domain, copied the vm on the newly provisioned gluster Volume with VDO I then tried to create a clone of a 50GB thin provisionning vm anddisconnected This morning I can not log in Engine Manager even after rebooting hosted-engine : I get this

[ovirt-users] Re: Forum available

On Fri, 2019-02-08 at 09:05 +0100, Josep Manel Andrés Moscardó wrote: > Hi all, > I am just wondering if anyone like me would like to have everything > that  > is bump here in a forum, with all the benefits it brings (and people  > will still be able to subscribe and reply through email).

[ovirt-users] Re: Network Performance Issues

Hi Bryan, On Thu, Feb 7, 2019 at 10:00 PM Bryan Sockel wrote: > > Hi, > > > > I currently have a 4 node ovirt cluster running. Each node is configured > with an active passive network setup, with each link being 10 GB. After > looking over my performance metrics collected via observium. I

[ovirt-users] Re: Forum available

I guess that if people like the idea, we'll need to get the oVirt guys involved in this too, and not sure how we should proceed with this, it is not a matter of HW resources or time, but about who host the server and manages it. Also this would need to be, at some point, announced as a

[ovirt-users] Re: Can not log to engine manager after creating a clone

Additional info On hosted-engine, engine-setup is stuck with : [ INFO ] Cleaning async tasks and compensations The following system tasks have been found running in the system: Task ID: cae248f7-781e-4861-bfbe-89d6e654a996 Task Name: Unknown

[ovirt-users] Re: Forcing vdsm to configure another NIC as the bridge (oVirt 4.2.8)

Hi Zachary, On Fri, Feb 8, 2019 at 2:56 AM wrote: > > I installed a new 10GbE NIC after installing the oVirt engine, and upon > reboot vdsm began auto-configuring one of the ports on the new NIC rather > than the original 1GbE interface. The new NIC is not currently connected to > anything,

[ovirt-users] Forum available

Hi all, I am just wondering if anyone like me would like to have everything that is bump here in a forum, with all the benefits it brings (and people will still be able to subscribe and reply through email). Something like Discourse would be nice in my opinion. Best. smime.p7s

[ovirt-users] Re: Forum available

+100 for a forum. On Feb 8 2019, at 12:37 am, Maton, Brett wrote: > +1 for me, a forum would be much easier to search > > > On Fri, 8 Feb 2019 at 08:06, Josep Manel Andrés Moscardó > mailto:josep.mosca...@embl.de)> wrote: > > Hi all, > > I am just wondering if anyone like me would like to have

[ovirt-users] Re: Forum available

+1 for me, a forum would be much easier to search On Fri, 8 Feb 2019 at 08:06, Josep Manel Andrés Moscardó < josep.mosca...@embl.de> wrote: > Hi all, > I am just wondering if anyone like me would like to have everything that > is bump here in a forum, with all the benefits it brings (and people

[ovirt-users] Re: Forum available

HyperKitty bug :( I got your email... """ Vinícius Ferrão fer...@versatushpc.com.br via ovirt.org Thu, Feb 7, 10:40 PM (9 hours ago) to John, Ovirt Hello, another guy with what appears to be the same problem... ... On Fri, Feb 8, 2019 at 7:45 AM Vinícius Ferrão wrote: > I’ve issues with

[ovirt-users] Re: Forum available

ovirt.org > Forum at the top. We use hyperkitty, which is both a mailing list and a forum. It has a search, threads, avatars, ... Is there a use case we're missing or does just no one know about it? Greg On Fri, Feb 8, 2019 at 5:46 AM Tony Brian Albers wrote: > On Fri, 2019-02-08 at 09:05

[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500

For some weird reason, I don't see my original comments on the list.ovirt forum pages. Here it is: Back in June of 2018, I posted regarding Agentless backup solutions. Greg Sheremeta replied & mentioned Trilio. The rest of the story...well just read on... These guys at Trilio have turned out to

[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500

Thanks for your post. I was recently looking for backup solutions which supports RHV/oVirt and OpenStack. I saw Trilio is providing this, but if I read your experience we should stay away from it. Other experiences? > Op 8 feb. 2019 om 12:15 heeft femi adegoke het > volgende geschreven: > >

[ovirt-users] Deleted Hosted Engine

I have to deal with this oVirt 4.2 cluster, 4 nodes. It seems someone smartly deleted hosted engine vm... how cool... so, all the VMs are still running, but no cluster management anymore :-). It's a testing environment, no hosted engine backup. I have no problems reinstalling the cluster... but

[ovirt-users] Re: Forum available

Yep. It's supposed to be instant. It's broken on this thread -- seems to work on others. I reported it and hopefully we'll get that fixed ASAP. Greg On Fri, Feb 8, 2019 at 6:23 AM Josep Manel Andrés Moscardó < josep.mosca...@embl.de> wrote: > I see, I wasn't aware at all, sorry. But this thread

[ovirt-users] Re: Forum available

Hadn't noticed... I can see the first post and that there were 14 comments. Can't see any of the replies or comments though. On Fri, 8 Feb 2019 at 12:08, Josep Manel Andrés Moscardó < josep.mosca...@embl.de> wrote: > still cannot see this thread in the Forum, switching web browsers didn't >

[ovirt-users] Re: Forum available

Hadn't noticed the link before! On Fri, 8 Feb 2019 at 11:31, Greg Sheremeta wrote: > Yep. It's supposed to be instant. It's broken on this thread -- seems to > work on others. I reported it and hopefully we'll get that fixed ASAP. > > Greg > > On Fri, Feb 8, 2019 at 6:23 AM Josep Manel Andrés

[ovirt-users] Re: Forum available

Ok, cool, please everyone give it a try! If you see any issues, please report here or open a ticket by emailing infra-supp...@ovirt.org Thanks!! On Fri, Feb 8, 2019 at 6:38 AM Maton, Brett wrote: > Hadn't noticed the link before! > > On Fri, 8 Feb 2019 at 11:31, Greg Sheremeta wrote: > >>

[ovirt-users] Re: [ANN] oVirt 4.3.0 is now generally available

I'm using openbacchus at the moment and have it working with oVirt 4.2.8 and 4.3. As you know it's UI based so doesn't tick your command line box (yet ;) ) On Mon, 4 Feb 2019 at 18:18, Torsten Stolpmann wrote: > On 04.02.2019 16:03, Mike wrote: > > 04.02.2019 17:45, Torsten Stolpmann пишет: >

[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500

Sinan, Take a look at https://storware.eu/en/storware-vprotect/ vProtect covers oVirt, RHv & also standalone KVM. On Feb 8 2019, at 3:27 am, Sinan Polat wrote: > Thanks for your post. I was recently looking for backup solutions which > supports RHV/oVirt and OpenStack. I saw Trilio is providing

[ovirt-users] Re: Forum available

I see, I wasn't aware at all, sorry. But this thread that I just started: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/TUU357HINGWFA23T3SMKDVTM7EKLX6VS/ has 6 replies that I cannot see, are they being parsed instantly ? Thanks. On 8/2/19 12:07, Greg Sheremeta wrote: ovirt.org

[ovirt-users] Re: Forum available

still cannot see this thread in the Forum, switching web browsers didn't help either. CC: infra-support On 8/2/19 12:39, Greg Sheremeta wrote: Ok, cool, please everyone give it a try! If you see any issues, please report here or open a ticket by emailing infra-supp...@ovirt.org

[ovirt-users] Re: Forum available

I’ve issues with HyperKitty too. For instance, I've answered a thread today at 1:36 UTC-2: Re: [ovirt-users] Re: need network design advice for iSCSI I can’t found it chronologically in HyperKitty. If using the search feature, I can find an answer from January 21th, but cannot find the message

[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8

I just tried the suggested patch/mod applying it with a simple sed call: sed -i "75i\'--verbose=db_ctl_base:syslog:off'" /usr/libexec/vdsm/hooks/after_get_caps/50_openstacknet So far it appears to have squashed the no key "odl_os_hostconfig_hostid" error message On Tue, 29 Jan 2019 at

[ovirt-users] changes in oVirt 4.3 and vGPU?

Hi, I just installed a Tesla T4 card, installed the nvidia's RPM, I see the mdev_type stuff etc. Following their instructions, I'm trying to set a Windows 10 VM to use the vGPU (the VM works without any vGPU), I get this error in the event... VM Win-10-test is down with error. Exit message:

[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500

Hi, We are currently starting an evaluation of https://wiki.sep.de/wiki/index.php/RHEV_backup Our experiences with the supplier are excellent and it has been out for a while now. Testing of the actual software is scheduled for this month. Regards, Jorick Astrego Netbulae B.V. On 2/8/19 12:27

[ovirt-users] Re: changes in oVirt 4.3 and vGPU?

> Exit message: internal error: qemu unexpectedly closed the monitor: 2019-02-08T14:01:11.287955Z qemu-kvm: warning: All CPU(s) up to maxcpus should be described in NUMA config, ability to start up with partial NUMA mappings is obsoleted and will be removed in future I got that error on a fresh

[ovirt-users] Re: AMD EPYC 4.3 upgrade 'CPU type is not supported in this cluster compatibility version or is not supported at all'

This procedure worked for our HE, which is on Skylake. I think I have a process that should work for moving our EPYC clusters to 4.3. If it works this weekend I will post it for others. Ryan On Thu, Feb 7, 2019 at 12:06 PM Simone Tiraboschi wrote: > > > On Thu, Feb 7, 2019 at 7:15 PM Juhani

[ovirt-users] Re: HE doesn't install under nested virtualization

I could find this *libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor * near line 8020 What is your host cpu? On Fri, Feb 8, 2019 at 9:57 PM Hetz Ben Hamo wrote: > I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record

[ovirt-users] Re: HE doesn't install under nested virtualization

I run it on intel i7 7th gen. Never faced this before. On Fri, Feb 8, 2019 at 10:07 PM Hetz Ben Hamo wrote: > AMD Ryzen 2700. The CPU in virt-manager is defined as "host-passthrough" > > And BTW, before "blaming" the Ryzen, I had the exact same issue with ESXi > on Intel processor. > > > On

[ovirt-users] Re: HE doesn't install under nested virtualization

Do you have your CPU type set for "host-passthrough"? On Feb 8 2019, at 8:25 am, Hetz Ben Hamo wrote: > I'm to setup an oVirt enviroment using virt-manager on Fedora 29 to record > some videos. For that - I'm using nested virtualization. > > The problem - after it's setting the HE - it goes up

[ovirt-users] Re: oVirt Cloud Init CentOS not setting password

I just use the run-one setup to specify the user/pass and networking/hostname. Everything works but the password doesn't. side note, does anyone know, now that I have this machine with no root password, how to set one? *Vincent Royer* *778-825-1057* *SUSTAINABLE

[ovirt-users] Re: HE doesn't install under nested virtualization

AMD Ryzen 2700. The CPU in virt-manager is defined as "host-passthrough" And BTW, before "blaming" the Ryzen, I had the exact same issue with ESXi on Intel processor. On Fri, Feb 8, 2019 at 6:35 PM Kaustav Majumder wrote: > I could find this > *libvirtError: the CPU is incompatible with host

[ovirt-users] Re: Forum available

So, while we wait for word on hyperkitty, do y'all use the ovirt subreddit? https://www.reddit.com/r/ovirt On Fri, Feb 8, 2019 at 8:44 AM Maton, Brett wrote: > Hadn't noticed... > > I can see the first post and that there were 14 comments. > Can't see any of the replies or comments though. > >

[ovirt-users] Re: Deleted Hosted Engine

On Fri, Feb 8, 2019 at 12:20 PM Manny SyS wrote: > I have to deal with this oVirt 4.2 cluster, 4 nodes. > It seems someone smartly deleted hosted engine vm... how cool... so, all > the VMs are still running, but no cluster management anymore :-). > It's a testing environment, no hosted engine

[ovirt-users] Re: oVirt Cloud Init CentOS not setting password

If it's a Red Hat derivative use this one:https://www.certdepot.net/rhel7-interrupt-boot-gain-access-system/___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: HE doesn't install under nested virtualization

Yes, that's the first thing I did and I checked in the VM that the kvm and kvm_amd module loaded. On Fri, Feb 8, 2019 at 6:42 PM femi adegoke wrote: > Do you have your CPU type set for "host-passthrough"? > > On Feb 8 2019, at 8:25 am, Hetz Ben Hamo wrote: > > I'm to setup an oVirt enviroment

[ovirt-users] Re: Can not log to engine manager after creating a clone

I managed to log back in by updating to ovirt-engine-wildfly-15.0.1-1 But now, I have the original vm disk and its clone in Locked State There are no task listed in the UI, neither in vdsm-client : On SPM Host : vdsm-client Host getAllTasksInfo {} If I try to

[ovirt-users] Re: HE doesn't install under nested virtualization

Simone, I'm using the same ZFS server with NFS services, both to my real oVirt machine and to this virt-manager vm's. On Fri, Feb 8, 2019 at 9:19 PM Simone Tiraboschi wrote: > > > On Fri, Feb 8, 2019 at 8:08 PM Hetz Ben Hamo wrote: > >> Yup, and nested is enabled. >> >> The HE is booting and

[ovirt-users] Re: oVirt Cloud Init CentOS not setting password

So what I noticed is that in the logs it referenced the external IP of my oVirt instance, I set the dns on the client to the correct DNS and it would appear that the issue has cleared up. ___ Users mailing list -- users@ovirt.org To unsubscribe send an

[ovirt-users] Re: HE doesn't install under nested virtualization

On Fri, Feb 8, 2019 at 8:08 PM Hetz Ben Hamo wrote: > Yup, and nested is enabled. > > The HE is booting and starting to run, I get the status messages about > starting etc, so it's not related to CPU functionality IMHO. > Which kind of storage are using? Did hosted-engine-setup successfully

[ovirt-users] Re: ovirt-imageio-proxy upload and status

> On Thu, Feb 7, 2019 at 3:19 PM Hetz Ben Hamo wrote: > > > Where do you see this status? In REST-API? > What is the status of the disk? ('Disks' tab in the WebAdmin) I am also seeing the same thing on a system I just upgraded from 4.2.8 to 4.3. After the upgrade, I uploaded a qcow2 image

[ovirt-users] Re: Engine installation failed at - get local vm ip

On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < bha...@synergysystemsindia.com> wrote: > Hi, > > I am trying to test ovirt hyperconverged setup. I've a dell server & using > vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. > > VM1 - Ovirt node 4.2 > 18GB RAM > 2*2 vcpu > nic 1 -

[ovirt-users] Re: changes in oVirt 4.3 and vGPU?

Answering to myself: Disable ECC on Tesla/GRID cards if you want to use vGPU. Reboot, and it works ;) ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: HE doesn't install under nested virtualization

And as I said, I had the exact same issue on ESXi with Intel Xeon E5620, so it's not related to AMD CPU's. On Fri, Feb 8, 2019 at 10:28 PM Edward Berger wrote: > But, I'm not sure the oVirt/qemu/libvirt/kvm software stack knows that, > and probably errs on the side of failure for unknown CPUs.

[ovirt-users] Re: HE doesn't install under nested virtualization

Yup, and nested is enabled. The HE is booting and starting to run, I get the status messages about starting etc, so it's not related to CPU functionality IMHO. On Fri, Feb 8, 2019 at 9:02 PM Greg Sheremeta wrote: > Does amd require a nested flag set like Intel does? > > On Fri, Feb 8, 2019,

[ovirt-users] Re: Engine installation failed at - get local vm ip

Hi, I am trying to configure with static ip address. I don't have any dns server so using dns entry in /etc/hosts file. Didn't try to set anything about mac address. going with system generated settings only. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.)

[ovirt-users] Re: HE doesn't install under nested virtualization

Ryzen, Threadripper, EPYC - all have the same virtualization down to the last bit (the last option that you mentioned). On Fri, Feb 8, 2019 at 9:26 PM Edward Berger wrote: > I'm wondering what cluster cpu compatibility version the Ryzen 2700 would > go under? > It used to default to Opteron

[ovirt-users] Engine installation failed at - get local vm ip

Hi, I am trying to test ovirt hyperconverged setup. I've a dell server & using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. VM1 - Ovirt node 4.2 18GB RAM 2*2 vcpu nic 1 - for backend gluster nic 2 - for frontend vm network VM2 - Ovirt node 4.2 18GB RAM 2*2 vcpu nic 1 - for

[ovirt-users] Re: HE doesn't install under nested virtualization

Does amd require a nested flag set like Intel does? On Fri, Feb 8, 2019, 12:03 PM Hetz Ben Hamo wrote: > Yes, that's the first thing I did and I checked in the VM that the kvm and > kvm_amd module loaded. > > > On Fri, Feb 8, 2019 at 6:42 PM femi adegoke > wrote: > >> Do you have your CPU type

[ovirt-users] Re: HE doesn't install under nested virtualization

I'm wondering what cluster cpu compatibility version the Ryzen 2700 would go under? It used to default to Opteron G3 when I tried it before, which is now "unsupported" as of ovirt 4.3. CentOS 7 complains about "untested" CPU with Ryzen 2700 in my experience. Maybe Fedora is better there. Here are

[ovirt-users] Is it possible to change the IP address of the Self Hosted Engine?

Hello, I’m aware that changing the DNS name of SHE is not a trivial thing. But what about the IP address? Can I just ssh to the engine, change it and reload the network? Thanks, ___ Users mailing list -- users@ovirt.org To unsubscribe send an email

[ovirt-users] Re: HE doesn't install under nested virtualization

But, I'm not sure the oVirt/qemu/libvirt/kvm software stack knows that, and probably errs on the side of failure for unknown CPUs. On Fri, Feb 8, 2019 at 2:55 PM Hetz Ben Hamo wrote: > Ryzen, Threadripper, EPYC - all have the same virtualization down to the > last bit (the last option that you

[ovirt-users] Re: Forcing vdsm to configure another NIC as the bridge (oVirt 4.2.8)

Thanks so much for the advice. I am able to log in, put the host in maintenance mode, and navigate to the menus you indicated. The interface I wish to have used for ovirtmgmt is green and available, but when I drag and drop it onto the interface, I seem to get a spinning wheel or "Updating"

[ovirt-users] Re: changes in oVirt 4.3 and vGPU?

Hetz, I'll be reaching out to you if I have vGPU problems!! I receive my T4 on Monday. On Feb 8 2019, at 12:16 pm, Hetz Ben Hamo wrote: > Answering to myself: Disable ECC on Tesla/GRID cards if you want to use vGPU. > Reboot, and it works ;) > ___ >

[ovirt-users] How to upgrade CPU type in Clusters?

Hello, For reasons unknown during oVirt 4.2 -> 4.3 my CPU type was Broadwell IBRS and because of this I can’t upgrade the datacenter to 4.3. The problem was that on 4.3 theres only Broadwell IBRS SSBD and Broadwell. So the only way to up the cluster to 4.3 was to downgrade to plain Broadwell.

[ovirt-users] Re: Forcing vdsm to configure another NIC as the bridge (oVirt 4.2.8)

Looks like it eventually finished with error message: "A Request to the Server failed with the following Status Code: 500" ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: How to upgrade CPU type in Clusters?

On Sat, Feb 9, 2019 at 1:05 AM Vinícius Ferrão wrote: > > Hello, > > For reasons unknown during oVirt 4.2 -> 4.3 my CPU type was Broadwell IBRS > and because of this I can’t upgrade the datacenter to 4.3. The problem was > that on 4.3 theres only Broadwell IBRS SSBD and Broadwell. > > So the