[ovirt-users] Re: botched 3.6 -> 4.0/1/2 upgrade, how to recover

If you can: restart your setup from scratch with at least 3 hosts. Really. If you don't face harsh consequences for doing so. It isn't just worth the hassle and pain. Use at least 3 hosts because: A node can corrupt due to many reasons. Natural causes, self inflicted ones. A corrupt node can

[ovirt-users] Re: VMs import over slow 1gig interface instead of fast 10gig interface?

Dial the Epson printer support number for best results as you will get proper aid from it. All of your issues will get resolved instantly as the professionals are there for 24 hours t help you. https://customer-service-us.com/printer/epson/ ___ Users

[ovirt-users] Dissertation Writing Help Online

Students can now easily handle their dissertation writing problems online. Students can get dissertation writing help online from anywhere in the world. Our website https://www.dissertationhelp.ae/ helps PhD students to overcome the problems. Writing a dissertation is hard tasks for PhD

[ovirt-users] Re: HostedEngine migration from ovirt1:/engine to gluster1:/engine (new ip)

Shouldn't this be done by restoring the engine? Initial engine host and storage parameters are collected while doing the restore. It might be a bit far stretched, but at least be an automated repeatable experience. Are there really procedures where you manipulate the DHW directly? I never saw

[ovirt-users] Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

I restored my engine to a gluster volume named :/engine on a three node hyperconverged oVirt 4.3.3.1 cluster. Before restoring I was checking the status of the volumes. They were clean. No heal entries. All peers connected. gluster volume status looked good. Then I restored. This went well. The

[ovirt-users] Re: Dashboard error after upgrade to 4.3.2

Hi, Sorry for the late response here. I missed your email before. Is your dashboard not showing data? Do you still have this issue? Best, -- SHIRLY RADCO BI SENIOR SOFTWARE ENGINEER Red Hat Israel On Wed, Apr 17, 2019 at 1:33 PM wrote: >

[ovirt-users] Re: oVirt Open Source Backup solution?

Strahil writes: > Another option is to create a snapshot, backup the snapahot and merge > the disks (delete the snapshot actually). > Sadly that option doesn't work with Databases, as you might inyerrupt > a transaction and leave the DB in inconsistent state. Yet another reason to do it from

[ovirt-users] Upgrade success story (4.3.0->4.3.3)

Hi! Just wanted to let you know that I succesfully upgrade our cluster to 4.3.3 (FC SAN based system and no Gluster). I postponed upgrade a lot because of the difficulties I had when upgrading from 4.2.8->4.3.0. This time Hosted Engine upgrade went without any problems. The first node also

[ovirt-users] Re: Node losing management network address?

Thanks for the tip. I upgraded my cluster and one node (which started this thread) again picked up DHCP address after reboot. I checked /var/lib/vdsm/persistence/netconf/nets/ovirtmgmt and it _still_ had DHCP settings in it. And I had previously removed and added node to cluster. It seems that

[ovirt-users] Is teamd supported on 4.3?

Hello guys, Next week, I'm planning to deploy ovirt-node 4.3 on a few hosts. I've been running bonds for the past years but I'd like to know if teaming (teamd) is also supported with this version.  My current package version(s): OS Version: | RHEL - 7 - 6.1810.2.el7.centos OS Description: |

[ovirt-users] HostedEngine migration from ovirt1:/engine to gluster1:/engine (new ip)

Hello Community, I have added new interfaces and bonded them in order to split storage from oVirt traffic and I have one last issue. In Storage -> Storage Domains , I have the "hosted_storage" domain that is pointing to the old "ovirt1.localdomain:/engine" instead of "gluster1:/engine". I have

[ovirt-users] Re: HostedEngine migration from ovirt1:/engine to gluster1:/engine (new ip)

On May 13, 2019 1:42:53 PM GMT+03:00, Andreas Elvers wrote: >Shouldn't this be done by restoring the engine? Initial engine host and >storage parameters are collected while doing the restore. It might be a >bit far stretched, but at least be an automated repeatable experience. > >Are there

[ovirt-users] Re: oVirt Open Source Backup solution?

I've been using oVirtBackup in the past few years and also I've done more restores from this backup than I'd have liked. All restores were successful. I'm pretty happy with this script: https://github.com/wefixit-AT/oVirtBackup Well documented, easy to install and configure. In summary the

[ovirt-users] Re: Is teamd supported on 4.3?

On Mon, 13 May 2019 15:30:11 +0200 Valentin Bajrami wrote: > Hello guys, > > Next week, I'm planning to deploy ovirt-node 4.3 on a few hosts. I've > been running bonds for the past years but I'd like to know if teaming > (teamd) is also supported with this version.  > No, unfortunately not.

[ovirt-users] Re: New to OVirt

On 10-5-2019 19:20, Slobodan Stevanovic wrote: > > I am having hard time installing OVIrt. > > Gluster deployment for the single node sometimes work, but host engine > deployment never works. > > > Any one has suggestion on which release of OVirt to use as a beginner. > > Could you tell what

[ovirt-users] Re: oVirt Open Source Backup solution?

On Mon, May 13, 2019 at 3:47 PM Derek Atkins wrote: > Strahil writes: > > > Another option is to create a snapshot, backup the snapahot and merge > > the disks (delete the snapshot actually). > > Sadly that option doesn't work with Databases, as you might inyerrupt > > a transaction and leave

[ovirt-users] Re: Permission Problem for admin portal

Hello, which version of oVirt Engine and VM Portal do you using? Cluster filtering by permissions is available in VM Portal version 1.5.0. BI On Wed, Jan 30, 2019 at 12:16 PM wrote: > Hello, > > I'm using the lastest ovirt release. > > I would like to add a cluster permission for a user. >

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

I see this sometimes after rebooting a server, and it usually stops happening, generally within a few hours, I’ve never tracked it down further. Don’t know for sure, but I assume it’s related to healing and goes away once everything syncs up. Occasionally it turns out to be a communications

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

What version of gluster are you running at the moment? > On May 13, 2019, at 10:25 AM, Andreas Elvers > wrote: > > Yes. After a reboot you could have a sync issue for up to a few hours. But > this issue persists now for 24 days. Additionally I see errors in the > glustershd.log of the two

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

Please note that I am running a hyper-converged NodeNG setup. I understand that upgrading single components is not really possible with a ovirt Node NG. And could probably break the datacenter upgrade path. Could you point out some reference for your suggestions? Docs, Bug reports or the

[ovirt-users] Re: Unable to deploy Hyperconverged Engine Node - v4.3.3

On Mon, May 13, 2019 at 5:34 PM wrote: > Hi everyone, > > I am trying a Gluster Hyperconvergence deployment where the Gluster part > has been completed successfully. All hosts are Centos 7.6.1810 (fresh > install) and two HP DL20 G9 (for VM's) and one HP 120 G7 (which hosts the > Gluster arbiter

[ovirt-users] Re: oVirt Open Source Backup solution?

I know that a robust API is provided for performing VM backup functions, but it seems crazy to me that oVirt has not implemented a simple method to backup VM to a storage domain such as an NFS export domain. Is this functionality being left out for a reason (perhaps not wanting to step on toes of

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

I've been having problems with my gluster Engine volume recently as well after updating to latest stable 4.3.3. For the past few days I've seen a random brick in the Engine volume go down and I have to force start it to get it working again. Right now I'm seeing that there are unsynced entries

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

I encountered serious issues with 5.3-5.5 (crashing bricks, multiple brick processes for the same brick causing disconnects and excessive heals). I had better luck with 5.6, although it’s not clear to me if the duplicate brick process issue is still present in that version. I finally jumped to

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

Ovirt just pulls in the gluster5 repos, if you upgrade now you should get gluster 5.6 on your nodes. If you’re running them on centos, you can install centos-release-gluster6 to go to gluster6. Ovirt NodeNG is a different story, as you mention, but I believe you can still run an update on it to

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

I use node NG as well, I just updated to 4.3.3 two days ago and I'm on Gluster 5.5. Yum update on host node yields no updates available On Mon, May 13, 2019 at 1:03 PM Darrell Budic wrote: > Ovirt just pulls in the gluster5 repos, if you upgrade now you should get > gluster 5.6 on your nodes.

[ovirt-users] Unable to deploy Hyperconverged Engine Node - v4.3.3

Hi everyone, I am trying a Gluster Hyperconvergence deployment where the Gluster part has been completed successfully. All hosts are Centos 7.6.1810 (fresh install) and two HP DL20 G9 (for VM's) and one HP 120 G7 (which hosts the Gluster arbiter volumes). Unfortunately I am unable to deploy

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

Ah, must be more fixed than I thought. I don’t have a NodeNG setup to examine, so I’m afraid I won’t have many more suggestions. > On May 13, 2019, at 11:29 AM, Jayme wrote: > > I use node NG as well, I just updated to 4.3.3 two days ago and I'm on > Gluster 5.5. Yum update on host node

[ovirt-users] Re: New to OVirt

Hi, When I installed oVirt (on CentOS 7.2 using 4.0.x in October 2016) I used the following sets of instructions: https://access.redhat.com/documentation/en/red-hat-virtualization/4.0/paged/self-hosted-engine-guide/chapter-2-deploying-self-hosted-engine

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

Yes. After a reboot you could have a sync issue for up to a few hours. But this issue persists now for 24 days. Additionally I see errors in the glustershd.log of the two hosts that are having heal info for that volume. The first node shows as OK and has no errors in its glustershd.log. The

[ovirt-users] Re: Gluster volume heals and after 5 seconds has /dom_md/ids dirty again

> What version of gluster are you running at the moment? I'm running glusterfs-5.5-1.el7.x86_64 the one that comes with oVirt Node 4.3.3.1 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy

[ovirt-users] oVirt and Windows NFS

Hi Everyone - Greetings from Detroit Michigan! Has anyone had any luck with using oVirt to connect to a Windows Server running an NFS service? I've made several attempts so far and am having problems getting the two to work together. I was hoping someone had some hints (besides the obvious

[ovirt-users] Re: oVirt Open Source Backup solution?

Works for smaller vms but that process is pretty inefficient imo. It had to clone the vm then export it, takes a lot of space and time. I like the way vprotect does it, snapshot then streams the image via the API. There’s no cloning to another vm step and also handles incremental backups of vms as