Il giorno sab 24 apr 2021 alle ore 19:11 Gianluca Cecchi <
gianluca.cec...@gmail.com> ha scritto:
> On Sat, Apr 24, 2021 at 3:31 PM David White via Users
> wrote:
>
>>
>> Off topic, but something to address: We need a stable ovirt-guest-agent
>> package. This doesn't seem to be working for me,
On Mon, Apr 26, 2021 at 2:34 PM penguin pages
wrote:
>
> I have been building out HCI stack with KVM/RHEV + oVirt with the HCI
> deployment process. This is very nice for small / remote site use cases,
> but with Gluster being anounced as EOL in 18 months, what is the
> replacement plan?
>
Are
Hello, guys!
I'm trying to deploy oVirt on GCP for the last two weeks.
Someone did it on GCP using nested virtualization?
My scenario is:
One standalone oVirt Engine and two hosts.
In the future I imagine to scale this solution.
Thank you.
Mário Gândara
What do you mean Gluster being announced as EOL? Where did you find this
information?
On Mon, Apr 26, 2021 at 9:34 AM penguin pages
wrote:
>
> I have been building out HCI stack with KVM/RHEV + oVirt with the HCI
> deployment process. This is very nice for small / remote site use cases,
> but
I have been building out HCI stack with KVM/RHEV + oVirt with the HCI
deployment process. This is very nice for small / remote site use cases, but
with Gluster being anounced as EOL in 18 months, what is the replacement plan?
Are their working projects and plans to replace Gluster with CEPH?
Hi, no, we don't use bit cloning via "clone" function, but we use templates as
a raw format template.
When creating a VM through this template, the server load will increase a lot.
We want to minimize this sharp increase during the establishment. We are
willing to wait longer to set up the
On Mon, Apr 26, 2021 at 4:30 PM penguin pages
wrote:
>
> It was on a support ticket / call I was having. I googled around and the
> only article I found was the one about features being removed.. But not
> sure if this effects oVirt / HCI.
>
> My ticket was about trying to deploy OCP on a full
On Mon, Apr 26, 2021 at 12:36 PM wrote:
>
> Hi, no, we don't use bit cloning via "clone" function, but we use templates
> as a raw format template.
>
> When creating a VM through this template, the server load will increase a lot.
>
> We want to minimize this sharp increase during the
It was on a support ticket / call I was having. I googled around and the only
article I found was the one about features being removed.. But not sure if this
effects oVirt / HCI.
My ticket was about trying to deploy OCP on a full SSD cluster of three nodes
and disk performance over 10Gb will
I haven't seen your email on the gluster users' mailing list .
What was your problem with the performance ?
Best Regards,Strahil Nikolov
On Mon, Apr 26, 2021 at 17:30, penguin pages wrote:
It was on a support ticket / call I was having. I googled around and the only
article I found was
On Mon, Apr 26, 2021 at 2:19 PM wrote:
>
> Hello, guys!
>
> I'm trying to deploy oVirt on GCP for the last two weeks.
>
> Someone did it on GCP using nested virtualization?
Yes, since Google does not give you a physical machine, this
is likely possible only with nested virtualization.
This is
I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated
vm. Towards the end of the engine-setup session I have a failure:
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping ovirt-fence-kdump-listener service
[ INFO ] Stopping dwh service
[
The response was that when I select the oVirt HCI storage volumes to deploy to
(with VDO enabled) which are a single 512GB SSD with only one small IDM VM
running. The IPI OCP 4.7 deployment fails. RH closed ticket because "gluster
volume is too slow".
I then tried to create with my other
On Mon, Apr 26, 2021 at 11:56 PM Don Dupuis wrote:
>
> Nir
> After looking at the debug output of daemon.log, it looks like the code is
> expecting ipv6 to be enabled and I have explicitly disable ipv6. When I
> enable it and reboot, it now WORKS!!.
Yes, we assume that ipv6 is enabled on the
I'm getting tons of these in the hosted-engine:/var/log/ovirt-engine/engine.log
2021-04-26 16:40:40,260-05 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engineScheduled-Thread-8) [] EVENT_ID:
VDS_BROKER_COMMAND_FAILURE(10,802), VDSM
On Mon, Apr 26, 2021 at 7:46 PM Don Dupuis wrote:
>
> I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm.
> Towards the end of the engine-setup session I have a failure:
>
> [ INFO ] Stage: Transaction setup
> [ INFO ] Stopping engine service
> [ INFO ] Stopping
"...Tuning Gluster with VDO bellow is quite difficult and the overhead of using
VDO could
reduce performance " Yup. hense creation of a dedicated data00 volume from
the 1TB SSD each server had. Matched options listed in oVirt.. but still OCP
would not address the drive as target for
2021-04-26 15:29:50,728 INFO(MainThread) [server] Starting
(hostname=rvsmanager2 pid=13203, version=2.1.1)
2021-04-26 15:29:50,729 DEBUG (MainThread) [services] Creating
remote.service on port 54323
2021-04-26 15:29:50,730 DEBUG (MainThread) [http] Prefer IPv4: False
2021-04-26
Tuning Gluster with VDO bellow is quite difficult and the overhead of using VDO
could reduce performance .
I would try with VDO compression and dedup disabled.If your SSD has 512 byte
physical & logical size, you can skip VDO at all to check performance.
Also FS mount options are very important
Nir
It just repeats. Here you go
2021-04-26 13:50:49,600 INFO(MainThread) [server] Starting
(hostname=manager2 pid=60513, version=2.1.1)
2021-04-26 13:50:49,609 ERROR (MainThread) [server] Server failed
Traceback (most recent call last):
File
On Mon, Apr 26, 2021 at 10:58 PM Don Dupuis wrote:
>
> Nir
> It just repeats. Here you go
Thanks, it seems that we need more work on logging.
Can you try to change the log level to DEBUG and start the
ovirt-imageio service?
Add this file:
$ cat /etc/ovirt-imageio/conf.d/99-local.conf
I did have my /etc/hosts setup on all 3 of the oVirt Hosts in the format you
described, with the exception of the trailing "host1" and "host2". I only had
the FQDN in there.
I had an outage of almost an hour this morning that may or may not be related
to this. An "ETL Service" started, at
Nir
After looking at the debug output of daemon.log, it looks like the code is
expecting ipv6 to be enabled and I have explicitly disable ipv6. When I
enable it and reboot, it now WORKS!!. Where I work we don't use ipv6, is
there another option to set so that this works on ipv4 only setups?
On Tue, Apr 27, 2021 at 12:48 AM matthew.st...@fujitsu.com
wrote:
>
> I'm getting tons of these in the
> hosted-engine:/var/log/ovirt-engine/engine.log
>
> 2021-04-26 16:40:40,260-05 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>
Nir
Thanks for the info and explanation.
Don
On Mon, Apr 26, 2021 at 4:27 PM Nir Soffer wrote:
> On Mon, Apr 26, 2021 at 11:56 PM Don Dupuis wrote:
> >
> > Nir
> > After looking at the debug output of daemon.log, it looks like the code
> is expecting ipv6 to be enabled and I have explicitly
There is no /var/log/vdsm directory on the hosted-engine.
This is from the current host, hosting the engine: aaa.bbb.ccc.100 is the
hosted-engine
2021-04-26 19:12:42,760-0500 INFO (jsonrpc/2) [api.host] START
getCapabilities() from=:::aaa.bbb.ccc.100,37812 (api:48)
2021-04-26
Due to POSIX compliance, oVirt needs 512 byte physical sector size. If your
SSD/NVME has the new standard (4096) you will need to use VDO with
'--emulate512' flag (or whatever it was named). Yet, if you already got 512
physical sector size - you can skip VDO totally.
About the mount options of
Problem solved.
I used Ansible and ran 'grep Duplicate /var/log/vdsm/vdsm.log' on all 121 of my
hosts. Only the log of the host currently running the hosted-engine had
entries.
I migrated the hosted-engine, and all other VMs to other hosts, and then put
the affected host into maintenance. I
I believe I have identified the issue, variable inheritance.
The inventory I include to define the hosts, includes several classes.
‘virtualmachines’ which the script uses to get the list of VMs it is going to
process. All VM defaults are defined within its ‘:vars’ section.
I also have
29 matches
Mail list logo
