Hello
I'm running Engine 4.3.9 and have fibre channel SSD storage and 4 nodes.
When uploading disk images i get around 100mbit/s per disk, if im running 3
uploads at the same time i get about 300mbit/s combined.
Everything is connected via 10G and 16G to FC storage.
Why is it so slow? and what
images other then via WebGUI? (of
course after convert)
//Magnus
From: Magnus Isaksson
Sent: 06 June 2020 10:58
To: users
Subject: [ovirt-users] Slow disk upload via WebGUI
Hello
I'm running Engine 4.3.9 and have fibre channel SSD storage and 4 nodes.
users@ovirt.org ; Magnus Isaksson
Subject: Re: [ovirt-users] Re: Slow disk upload via WebGUI
Hi Magnus,
there are several ways to upload a disk.
For details, check
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/html/administration_guide/sect-Vi
e physical switch.
So how do i do this setup on oVirt so i don't need to configure the
switches?
I know how to bond the cards, but i am afraid of a switchloop, so i just want
to make sure that does not happen.
Regards
Magnus Isaksson
__
Hello,
In VMware you create a vlan and for tag you choose "all" or 4095.
What is the equivalent in oVirt?
I am setting up a pfSense firewall and i dont want to create a new NIC
for every VLAN i want in the firewall, so in VMware im creating 3 nics,
WAN, VGT and HA Sync, with that i can add as
Hello,
I have tried googling and searching in the documentation, but i can't
seem to find any instructions on how to remove a authentication source.
The background is that i did set up an FreeIPA server for auth, worked
perfectly, but i ran into some problems using that to auth other
systems
Hello
I got the same thing.
Tho, this post at comment 6 worked perfekt.
https://bugzilla.redhat.com/show_bug.cgi?id=1496762
//Magnus
On 16 November 2017 23:12:26 CET, Luca 'remix_tj' Lorenzetto
wrote:
>Il 16 nov 2017 9:36 PM, "Julio Cesar Bustamante" <
>julio.cesar.bustama...@gmail.com> ha s
Anyone?
//Magnus
From: Magnus Isaksson
Sent: den 20 november 2017 16:01
To: 'users@ovirt.org'
Subject: oVirt node and NFS
Hi,
This is probably an easy thing, but I can't seem to find the solution.
On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach,
Hi,
This is probably an easy thing, but I can't seem to find the solution.
On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach,
but I noticed that the firewall is not open for that on the host.
So, how to I configure the Nodes firewall?
Regards
Magnus Isa
that is not running, so how
are these iptables rules set? And how do I add an opening for NFS?
I have checked that troubleshooting guide but it have no info about this.
Regards
Magnus Isaksson
From: Shani Leviim [mailto:slev...@redhat.com]
Sent: den 21 november 2017 17:39
To: Magnus Isaksson
Cc
Hello all
I have installed MikroTik Cloud Hosted Router on my oVirt 4.2 setup
It starts fine and so but oVirt complains about guest-agent.
At MikroTik this information is available regarding guest-agent
https://wiki.mikrotik.com/wiki/Manual:CHR#KVM
But I don't understand what I shall do with tha
nted “device_prefix =
/dev/virtio-ports/” in /etc/ovirt-guest-agent.conf
* Run: udevadm trigger --subsystem-match="virtio-ports"
* (re)start service
* Works! 😊
//Magnus
From: Magnus Isaksson
Sent: den 8 maj 2018 10:59
To: users@ovirt.org
Subject: oVirt guest agent on OpenSUSE 42.
Hi all
I have some trouble with guest agent for OpenSUSE 42.3 Leap, short version, it
don’t start.
I have followed instructions that I could find about this error, but all I
could find was for Debian 8
(http://lists.ovirt.org/pipermail/users/2018-January/086102.html)
Still same problem.
Anyon
Hi!
I would need some help removing a snapshot that looks like this.
How do i remove it manually or fix snapshot definition?
-
Error while executing action:
TUN_SALDC01:
* The requested snapshot has an invalid parent, either fix the snapshot
definition or remove it manually
Thank you for all help, that did the trick.
Cheers
Magnus
From: Eli Mesika
Sent: 19 August 2020 19:37
To: Shani Leviim
Cc: Magnus Isaksson ; users
Subject: Re: [ovirt-users] Re: Help remove snapshot
On Mon, Aug 17, 2020 at 2:48 PM Shani Leviim
mailto:slev
Hello
We have the same issue, and not just one VM, we have about 10-15 VMs that have
either snapshots that are illegal or snapshots that is not possible to remove.
This have been an issue for quite some time, all since beginning of 4.3 we get
"vm with illegal snapshots" almost every week, and mo
Hi
We have the same issue as you, and we are also using vProtect.
I have no solution, but I'm very interested in how to address this.
Some VM:s we do have managed to remove the illegal snapshots after changing
storage for the VM:s disks, but we have 3-4 VM:s that will not want to remove
the ill
Its for storage of VM disks, not OS but like filestorage.
I have done a similar setup with distributed replicated arbiter volumes, but i
loose so much storage space.
Each disk is 6TB, in a raid 5 it would be 66TB, with dispersed ~45TB, with
D-R-A it was around 28TB, quite a massive loss.
It wa
h space as possible and
some redundancy with the 4 hosts i have?
//Magnus
From: Sahina Bose
Sent: 16 April 2019 10:55
To: Magnus Isaksson
Cc: users
Subject: Re: [ovirt-users] Gluster suggestions
On Tue, Apr 16, 2019 at 1:42 PM wrote:
>
> Hello
>
, loosing connection etc.
All hosts are connected via 10G interface
So any suggestions on how i would set this up as best is much appreciated.
Regards
Magnus Isaksson
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le
Hello all
I'm having trouble upgrading my engine to 4.3.3 from 4.2.8
The upgrade goes well, no errors but webgui wont load, it just says "waiting
for engine"
I have tried to set up a new machine with engine and import the DB from the
old(after upgrade) still the same problem.
So after quite a
Hello all!
I'm having quite some trouble with VMs that have a large amount of dropped
packets on RX.
This, plus customers complain about short dropped connections, for example one
customer has a SQL server and an other serevr connecting to it, and it is
randomly dropping connections. Before the
Hello
@strahil
The packet drops are frequent, every time i run "ip -s link" on the guest there
is new dropped packets, on the hosts it says "0" and in oVirt it says "0".
I can run tcpdump on hosts and guests, but i don't know how to capture the
dropped packets with tcpdump.
There are no RX or
, tried so many
times, but all i get is a white page after the upgrade, according to
engine-setup, was a success.
So, how can i do this?
Reagrds
Magnus Isaksson
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Hello
I have quite some trouble getting Gluster to work.
I have 4 nodes running CentOS and oVirt. These 4 nodes is split up in 2
clusters.
I do not run Gluster via oVirt, i run it stand alone to be able to use all 4
nodes into one gluster volume.
I can add all peers successfully, and i can
25 matches
Mail list logo