Re: [Users] compatibility issue
On 02/18/2013 08:27 PM, Jonathan Horne wrote: Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. Probably the vdsm version on the node doesn't support 3.2 clusters and needed to be updated. You can see the supported cluster versions by running the following on the node: vdsClient -s 0 getVdsCaps | grep clusterLevels 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. This warning is as a result of the ovirtmgmt network configured on top of two interfaces. (The UNKNOWN bug was replaced with the actual nics name yesterday on commit bd56be79a4e1c5a873a65bf41adbcffef05cbde2). ovirt doesn't support this type of network configuration. You should remove one of the nics manually from the bridge, by running on the host: #to examine which interfaces are used for the management network brctl show ovirtmgmt # in order to remove on of the nics brctl delif ovirtmgmt one_of_the_nics The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] compatibility issue
Ah, thank you! This was the problem, I did not have the ovirt repo on my node. The 3.2 node has activated properly now! Thanks, jonathan -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jeff Bailey Sent: Monday, February 18, 2013 5:09 PM To: users@ovirt.org Subject: Re: [Users] compatibility issue Did you add the ovirt repo to the node before deploying it? If not then you may have the older vdsm from the fedora repo. --- Jeff On 2/18/2013 5:06 PM, Jonathan Horne wrote: Both the manager and the node are fresh installs of fedora 18, and the node ovirt install was initiated from the web console (so I don’t see how its possible I have a downlevel version on the node). -Original Message- From: Gianluca Cecchi [mailto:gianluca.cec...@gmail.com] Sent: Monday, February 18, 2013 1:12 PM To: Jonathan Horne Cc: users@ovirt.org Subject: Re: [Users] compatibility issue On Mon, Feb 18, 2013 at 7:27 PM, Jonathan Horne jho...@skopos.us wrote: Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan At a certain point during 3.2 development the default became 3.2. What version is your engine? Did you install ex-novo the engine and the node? Did you perhaps reuse an ip that for some reason is already allocated in db as 3.1 host? Probably not me, but others can help you if you give full details of environment and logs... Gianluca This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] compatibility issue
Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] compatibility issue
On Mon, Feb 18, 2013 at 7:27 PM, Jonathan Horne jho...@skopos.us wrote: Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan At a certain point during 3.2 development the default became 3.2. What version is your engine? Did you install ex-novo the engine and the node? Did you perhaps reuse an ip that for some reason is already allocated in db as 3.1 host? Probably not me, but others can help you if you give full details of environment and logs... Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] compatibility issue
Both the manager and the node are fresh installs of fedora 18, and the node ovirt install was initiated from the web console (so I don’t see how its possible I have a downlevel version on the node). -Original Message- From: Gianluca Cecchi [mailto:gianluca.cec...@gmail.com] Sent: Monday, February 18, 2013 1:12 PM To: Jonathan Horne Cc: users@ovirt.org Subject: Re: [Users] compatibility issue On Mon, Feb 18, 2013 at 7:27 PM, Jonathan Horne jho...@skopos.us wrote: Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan At a certain point during 3.2 development the default became 3.2. What version is your engine? Did you install ex-novo the engine and the node? Did you perhaps reuse an ip that for some reason is already allocated in db as 3.1 host? Probably not me, but others can help you if you give full details of environment and logs... Gianluca This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] compatibility issue
Did you add the ovirt repo to the node before deploying it? If not then you may have the older vdsm from the fedora repo. --- Jeff On 2/18/2013 5:06 PM, Jonathan Horne wrote: Both the manager and the node are fresh installs of fedora 18, and the node ovirt install was initiated from the web console (so I don’t see how its possible I have a downlevel version on the node). -Original Message- From: Gianluca Cecchi [mailto:gianluca.cec...@gmail.com] Sent: Monday, February 18, 2013 1:12 PM To: Jonathan Horne Cc: users@ovirt.org Subject: Re: [Users] compatibility issue On Mon, Feb 18, 2013 at 7:27 PM, Jonathan Horne jho...@skopos.us wrote: Just got 3.2 installed as ovirt node on a fedora 18 install. After the reboot, the console now complains with this: 2013-Feb-18, 12:20 Host rnd8 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.2. 2013-Feb-18, 12:20 Bridged network ovirtmgmt is attached to multiple interfaces: UNKNOWN on Host rnd8. The server (rnd8) is a dell 2950 with dual X5460 processors. I never had to mess with this type of thing in the past on 3.1, is there something I did not configure on 3.2 that is causing this? Is a dell 2950 not supported on 3.2? Thanks, jonathan At a certain point during 3.2 development the default became 3.2. What version is your engine? Did you install ex-novo the engine and the node? Did you perhaps reuse an ip that for some reason is already allocated in db as 3.1 host? Probably not me, but others can help you if you give full details of environment and logs... Gianluca This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
