Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there,

Simone it seems that with these three command before running "hosted-engine
--deploy"

   vdsm-tool configure --force
   systemcl restart libvirtd
   systemcl restart vdsmd

It is working and there is no fail.

Thanks for all in advance,
Manuel Luis Aznar

2017-05-15 17:55 GMT+01:00 Manuel Luis Aznar :

> Hello there,
>
> Attached to this message you have the /etc/libvirt/qemu.conf file.
>
> I will retry the installation and before launching it, I will run those
> three comands.
>
> Thanks for all in advance
> If you find something or need something ask without any problem
>
> 2017-05-15 17:54 GMT+01:00 Manuel Luis Aznar 
> :
>
>> Hello there,
>>
>> Attached to this message you have the /etc/libvirt/qemu.conf file.
>>
>> I will retry the installation and before launching it, I will run those
>> three comands.
>>
>> Thanks for all in advance
>> If you find something or need something ask without any problem
>> Manuel
>>
>> 2017-05-12 17:21 GMT+01:00 Simone Tiraboschi :
>>
>>>
>>>
>>> On Fri, May 12, 2017 at 1:31 PM, Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com> wrote:
>>>
 Hello there,

 Sorry for the late response, but I haven been busy doing job things...

 I was looking at the email of Yaniv and here are the results from my
 broken installation:

  Permission on /dev/kvm and /dev/random:

 [root@host1 audit]# ls -Z /dev/kvm
  crw-rw-rw-. root kvm system_u:object_r:kvm_device_t:s0
 /dev/kvm
 [root@host1 audit]# ls -Z /dev/random
  crw-rw-rw-. root root system_u:object_r:random_device_t:s0
 /dev/random

  Finally about SELinux settings:

 [root@host1 audit]# ls -la /var/log/audit/audit.log
 -rw---. 1 root root 575333 may 12 12:18
 /var/log/audit/audit.log

 [root@host1 audit]# ls -Z /var/log/audit/audit.log
 -rw---. root root system_u:object_r:auditd_log_t:s0
 /var/log/audit/audit.log

 I have attached to the mail the full log audit file
 (/var/log/audit/audit.log)

 Again I am sorry about the delay.

 Any answer would be very appreciated,

>>>
>>> OK, it fails here:
>>>
>>> type=VIRT_CONTROL msg=audit(1493635665.036:776): pid=21993 uid=0
>>> auid=4294967295 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023
>>> msg='virt=kvm op=start reason=booted vm="HostedEngine"
>>> uuid=92faf919-b7b1-42dc-a70c-15c6eb32ba2f vm-pid=-1
>>> exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=failed'
>>>
>>> Can you please share your /etc/libvirt/qemu.conf ?
>>>
>>> Maybe you can also try running:
>>>vdsm-tool configure --force
>>>systemcl restart libvirtd
>>>systemcl restart vdsmd
>>> and try again
>>>
>>>
>>>
 Manuel

 2017-05-07 7:46 GMT+01:00 Yaniv Kaul :

>
>
> On Thu, May 4, 2017 at 8:45 PM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello there,
>>
>> Sorry for the delay to answer the mail, but, I have been busy doing
>> things...
>>
>> The permission on /dev/random are the following:
>>
>> [root@host1 manuel]# ls -la /dev/random
>> crw-rw-rw-. 1 root root 1, 8 may  4 18:06 /dev/random
>>
>> Suppose that these permission should look something like:
>>
>> [root@host1 manuel]# ls -la /dev/random
>> crw-rw-rw-. 1 vdsm kvm 1, 8 may  4 18:06 /dev/random
>>
>> Finally I do not know what you meant with permission on SELinux audit
>> logs?¿? Sorry for my lack of understanding, so, please let me know much
>> more precisely and I will look for it
>>
>
> You can get the selinux settings of a file with ls -Z . For example:
> [ykaul@ykaul ovirt-system-tests]$ ls -Z /dev/kvm
> system_u:object_r:kvm_device_t:s0 /dev/kv
>
> Also, you can search for selinux issues either in /var/log/audit or
> using ausearch. For example:
> sudo ausearch -m AVC -i
>
> Y.
>
>>
>>
>> Thanks for all in advance
>> I will be waiting for you
>> Manuel Luis Aznar
>>
>> 2017-05-03 15:09 GMT+01:00 Simone Tiraboschi :
>>
>>>
>>>
>>> On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com> wrote:
>>>
 Hello Simone and all others,

 I have attached to the mail the requested files. If you have any
 other inquiry just say it, The failed installation drive would be keep 
 safe
 until solving this problem.

 Thanks for all in advance
 Manuel

>>>
>>> The issue is here:
>>> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
>>> 10.el7_3.5 (CentOS BuildSystem ,
>>> 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Fri, May 12, 2017 at 1:31 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there,
>
> Sorry for the late response, but I haven been busy doing job things...
>
> I was looking at the email of Yaniv and here are the results from my
> broken installation:
>
>  Permission on /dev/kvm and /dev/random:
>
> [root@host1 audit]# ls -Z /dev/kvm
>  crw-rw-rw-. root kvm system_u:object_r:kvm_device_t:s0
> /dev/kvm
> [root@host1 audit]# ls -Z /dev/random
>  crw-rw-rw-. root root system_u:object_r:random_device_t:s0
> /dev/random
>
>  Finally about SELinux settings:
>
> [root@host1 audit]# ls -la /var/log/audit/audit.log
> -rw---. 1 root root 575333 may 12 12:18
> /var/log/audit/audit.log
>
> [root@host1 audit]# ls -Z /var/log/audit/audit.log
> -rw---. root root system_u:object_r:auditd_log_t:s0
> /var/log/audit/audit.log
>
> I have attached to the mail the full log audit file
> (/var/log/audit/audit.log)
>
> Again I am sorry about the delay.
>
> Any answer would be very appreciated,
>

OK, it fails here:

type=VIRT_CONTROL msg=audit(1493635665.036:776): pid=21993 uid=0
auid=4294967295 ses=4294967295
subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm op=start
reason=booted vm="HostedEngine" uuid=92faf919-b7b1-42dc-a70c-15c6eb32ba2f
vm-pid=-1 exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=failed'

Can you please share your /etc/libvirt/qemu.conf ?

Maybe you can also try running:
   vdsm-tool configure --force
   systemcl restart libvirtd
   systemcl restart vdsmd
and try again


> Manuel
>
> 2017-05-07 7:46 GMT+01:00 Yaniv Kaul :
>
>>
>>
>> On Thu, May 4, 2017 at 8:45 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> Sorry for the delay to answer the mail, but, I have been busy doing
>>> things...
>>>
>>> The permission on /dev/random are the following:
>>>
>>> [root@host1 manuel]# ls -la /dev/random
>>> crw-rw-rw-. 1 root root 1, 8 may  4 18:06 /dev/random
>>>
>>> Suppose that these permission should look something like:
>>>
>>> [root@host1 manuel]# ls -la /dev/random
>>> crw-rw-rw-. 1 vdsm kvm 1, 8 may  4 18:06 /dev/random
>>>
>>> Finally I do not know what you meant with permission on SELinux audit
>>> logs?¿? Sorry for my lack of understanding, so, please let me know much
>>> more precisely and I will look for it
>>>
>>
>> You can get the selinux settings of a file with ls -Z . For example:
>> [ykaul@ykaul ovirt-system-tests]$ ls -Z /dev/kvm
>> system_u:object_r:kvm_device_t:s0 /dev/kv
>>
>> Also, you can search for selinux issues either in /var/log/audit or using
>> ausearch. For example:
>> sudo ausearch -m AVC -i
>>
>> Y.
>>
>>>
>>>
>>> Thanks for all in advance
>>> I will be waiting for you
>>> Manuel Luis Aznar
>>>
>>> 2017-05-03 15:09 GMT+01:00 Simone Tiraboschi :
>>>


 On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
 manuel.luis.az...@gmail.com> wrote:

> Hello Simone and all others,
>
> I have attached to the mail the requested files. If you have any other
> inquiry just say it, The failed installation drive would be keep safe 
> until
> solving this problem.
>
> Thanks for all in advance
> Manuel
>

 The issue is here:
 May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
 10.el7_3.5 (CentOS BuildSystem ,
 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
 May  1 11:47:45 host1 journal: hostname: host1.bajada.es
 May  1 11:47:45 host1 journal: Falló al conectar con el socket de
 monitor: No existe el proceso
 May  1 11:47:45 host1 journal: internal error: process exited while
 connecting to monitor: /dev/random -device 
 virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
 -msg timestamp=on#012Could not access KVM kernel module: Permission
 denied#012failed to initialize KVM: Permission denied
 May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
 10.el7_3.5 (CentOS BuildSystem ,
 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
 May  1 11:47:45 host1 journal: hostname: host1.bajada.es
 May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
 entrada/salida
 May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
 entrada/salida

 could you please also check the permission on /dev/random and SELinux
 audit logs?



>
> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi :
>
>> Sure, but first we need to understand what it's happening: in our CI
>> process everything is fine so I think it's something specific to your 
>> env.
>> Could you please share your:
>> /var/log/libvirt/qemu/HostedEngine.log
>> /var/log/messages
>>
>> thanks,
>> Simone
>>
>>
>> On 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Yaniv Kaul]

On Thu, May 4, 2017 at 8:45 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there,
>
> Sorry for the delay to answer the mail, but, I have been busy doing
> things...
>
> The permission on /dev/random are the following:
>
> [root@host1 manuel]# ls -la /dev/random
> crw-rw-rw-. 1 root root 1, 8 may  4 18:06 /dev/random
>
> Suppose that these permission should look something like:
>
> [root@host1 manuel]# ls -la /dev/random
> crw-rw-rw-. 1 vdsm kvm 1, 8 may  4 18:06 /dev/random
>
> Finally I do not know what you meant with permission on SELinux audit
> logs?¿? Sorry for my lack of understanding, so, please let me know much
> more precisely and I will look for it
>

You can get the selinux settings of a file with ls -Z . For example:
[ykaul@ykaul ovirt-system-tests]$ ls -Z /dev/kvm
system_u:object_r:kvm_device_t:s0 /dev/kv

Also, you can search for selinux issues either in /var/log/audit or using
ausearch. For example:
sudo ausearch -m AVC -i

Y.

>
>
> Thanks for all in advance
> I will be waiting for you
> Manuel Luis Aznar
>
> 2017-05-03 15:09 GMT+01:00 Simone Tiraboschi :
>
>>
>>
>> On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello Simone and all others,
>>>
>>> I have attached to the mail the requested files. If you have any other
>>> inquiry just say it, The failed installation drive would be keep safe until
>>> solving this problem.
>>>
>>> Thanks for all in advance
>>> Manuel
>>>
>>
>> The issue is here:
>> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
>> 10.el7_3.5 (CentOS BuildSystem ,
>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
>> May  1 11:47:45 host1 journal: Falló al conectar con el socket de
>> monitor: No existe el proceso
>> May  1 11:47:45 host1 journal: internal error: process exited while
>> connecting to monitor: /dev/random -device 
>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
>> -msg timestamp=on#012Could not access KVM kernel module: Permission
>> denied#012failed to initialize KVM: Permission denied
>> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package:
>> 10.el7_3.5 (CentOS BuildSystem ,
>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
>> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
>> entrada/salida
>> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
>> entrada/salida
>>
>> could you please also check the permission on /dev/random and SELinux
>> audit logs?
>>
>>
>>
>>>
>>> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi :
>>>
 Sure, but first we need to understand what it's happening: in our CI
 process everything is fine so I think it's something specific to your env.
 Could you please share your:
 /var/log/libvirt/qemu/HostedEngine.log
 /var/log/messages

 thanks,
 Simone


 On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar <
 manuel.luis.az...@gmail.com> wrote:

> Ok thankyou.
>
> Suppose that this problem probably would be solve in a future release.
>
> Thanks,
> Manuel
>
> 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi :
>
>>
>>
>> On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there again,
>>>
>>> Yes as I say, I have done several clean installations and the VM
>>> engine sometimes starts without any problem. So Simone any 
>>> recommendation
>>> to make the engine VM starts properly?¿
>>>
>>> While is installing the HA agent and HA broker are down, would I get
>>> good result by starting the services myself?¿
>>>
>>> Any help from Simone or somebody would be appreciated
>>> Thanks for all in advance
>>> Manuel Luis Aznar
>>>
>>
>> I suggest to check libvirt logs.
>>
>>
>>>
>>> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :
>>>


 On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
 manuel.luis.az...@gmail.com> wrote:

> Hello there,
>
> I have been looking in the internet using google why my
> installation of ovirt-hosted-engine is failing.
>
> I have found this link:
>
>  https://www.mail-archive.com/users@ovirt.org/msg40864.html
> (Hosted engine install failed; vdsm upset about broker)
>
> It seems to be the same error...
>
> So to knarra and Jamie Lawrence my question is:
>
> Did you manage to discover the problem?? In my instalation I
> am using nfs and not gluster...
>
> I have read the error and is the same error
> 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there,

Sorry for the delay to answer the mail, but, I have been busy doing
things...

The permission on /dev/random are the following:

[root@host1 manuel]# ls -la /dev/random
crw-rw-rw-. 1 root root 1, 8 may  4 18:06 /dev/random

Suppose that these permission should look something like:

[root@host1 manuel]# ls -la /dev/random
crw-rw-rw-. 1 vdsm kvm 1, 8 may  4 18:06 /dev/random

Finally I do not know what you meant with permission on SELinux audit
logs?¿? Sorry for my lack of understanding, so, please let me know much
more precisely and I will look for it


Thanks for all in advance
I will be waiting for you
Manuel Luis Aznar

2017-05-03 15:09 GMT+01:00 Simone Tiraboschi :

>
>
> On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello Simone and all others,
>>
>> I have attached to the mail the requested files. If you have any other
>> inquiry just say it, The failed installation drive would be keep safe until
>> solving this problem.
>>
>> Thanks for all in advance
>> Manuel
>>
>
> The issue is here:
> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
> (CentOS BuildSystem , 2017-03-03-02:09:45,
> c1bm.rdu2.centos.org)
> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
> May  1 11:47:45 host1 journal: Falló al conectar con el socket de monitor:
> No existe el proceso
> May  1 11:47:45 host1 journal: internal error: process exited while
> connecting to monitor: /dev/random -device 
> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
> -msg timestamp=on#012Could not access KVM kernel module: Permission
> denied#012failed to initialize KVM: Permission denied
> May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
> (CentOS BuildSystem , 2017-03-03-02:09:45,
> c1bm.rdu2.centos.org)
> May  1 11:47:45 host1 journal: hostname: host1.bajada.es
> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
> entrada/salida
> May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
> entrada/salida
>
> could you please also check the permission on /dev/random and SELinux
> audit logs?
>
>
>
>>
>> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi :
>>
>>> Sure, but first we need to understand what it's happening: in our CI
>>> process everything is fine so I think it's something specific to your env.
>>> Could you please share your:
>>> /var/log/libvirt/qemu/HostedEngine.log
>>> /var/log/messages
>>>
>>> thanks,
>>> Simone
>>>
>>>
>>> On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com> wrote:
>>>
 Ok thankyou.

 Suppose that this problem probably would be solve in a future release.

 Thanks,
 Manuel

 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi :

>
>
> On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello there again,
>>
>> Yes as I say, I have done several clean installations and the VM
>> engine sometimes starts without any problem. So Simone any recommendation
>> to make the engine VM starts properly?¿
>>
>> While is installing the HA agent and HA broker are down, would I get
>> good result by starting the services myself?¿
>>
>> Any help from Simone or somebody would be appreciated
>> Thanks for all in advance
>> Manuel Luis Aznar
>>
>
> I suggest to check libvirt logs.
>
>
>>
>> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :
>>
>>>
>>>
>>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com> wrote:
>>>
 Hello there,

 I have been looking in the internet using google why my
 installation of ovirt-hosted-engine is failing.

 I have found this link:

  https://www.mail-archive.com/users@ovirt.org/msg40864.html
 (Hosted engine install failed; vdsm upset about broker)

 It seems to be the same error...

 So to knarra and Jamie Lawrence my question is:

 Did you manage to discover the problem?? In my instalation I am
 using nfs and not gluster...

 I have read the error and is the same error "BrokerConnectionError:
 ...". The ovirt-ha-agent and ovirt-ha-broker did not start when the
 installation is creating the engine VM...

>>>
>>> This is just a false positive: the HA agent and the HA broker are
>>> still down so vdsm is complaining but at that point it's absolutely 
>>> fine by
>>> itself since the engine VM still doesn't exists.
>>> We already have an open bug to reduce the impact of that message.
>>>
>>> The real issue is that for some reason the engine VM could not start
>>> on 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello Simone and all others,
>
> I have attached to the mail the requested files. If you have any other
> inquiry just say it, The failed installation drive would be keep safe until
> solving this problem.
>
> Thanks for all in advance
> Manuel
>

The issue is here:
May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
(CentOS BuildSystem , 2017-03-03-02:09:45,
c1bm.rdu2.centos.org)
May  1 11:47:45 host1 journal: hostname: host1.bajada.es
May  1 11:47:45 host1 journal: Falló al conectar con el socket de monitor:
No existe el proceso
May  1 11:47:45 host1 journal: internal error: process exited while
connecting to monitor: /dev/random -device
virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg
timestamp=on#012Could not access KVM kernel module: Permission
denied#012failed to initialize KVM: Permission denied
May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
(CentOS BuildSystem , 2017-03-03-02:09:45,
c1bm.rdu2.centos.org)
May  1 11:47:45 host1 journal: hostname: host1.bajada.es
May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
entrada/salida
May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
entrada/salida

could you please also check the permission on /dev/random and SELinux audit
logs?



>
> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi :
>
>> Sure, but first we need to understand what it's happening: in our CI
>> process everything is fine so I think it's something specific to your env.
>> Could you please share your:
>> /var/log/libvirt/qemu/HostedEngine.log
>> /var/log/messages
>>
>> thanks,
>> Simone
>>
>>
>> On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Ok thankyou.
>>>
>>> Suppose that this problem probably would be solve in a future release.
>>>
>>> Thanks,
>>> Manuel
>>>
>>> 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi :
>>>


 On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
 manuel.luis.az...@gmail.com> wrote:

> Hello there again,
>
> Yes as I say, I have done several clean installations and the VM
> engine sometimes starts without any problem. So Simone any recommendation
> to make the engine VM starts properly?¿
>
> While is installing the HA agent and HA broker are down, would I get
> good result by starting the services myself?¿
>
> Any help from Simone or somebody would be appreciated
> Thanks for all in advance
> Manuel Luis Aznar
>

 I suggest to check libvirt logs.


>
> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :
>
>>
>>
>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> I have been looking in the internet using google why my installation
>>> of ovirt-hosted-engine is failing.
>>>
>>> I have found this link:
>>>
>>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html
>>> (Hosted engine install failed; vdsm upset about broker)
>>>
>>> It seems to be the same error...
>>>
>>> So to knarra and Jamie Lawrence my question is:
>>>
>>> Did you manage to discover the problem?? In my instalation I am
>>> using nfs and not gluster...
>>>
>>> I have read the error and is the same error "BrokerConnectionError:
>>> ...". The ovirt-ha-agent and ovirt-ha-broker did not start when the
>>> installation is creating the engine VM...
>>>
>>
>> This is just a false positive: the HA agent and the HA broker are
>> still down so vdsm is complaining but at that point it's absolutely fine 
>> by
>> itself since the engine VM still doesn't exists.
>> We already have an open bug to reduce the impact of that message.
>>
>> The real issue is that for some reason the engine VM could not start
>> on your system.
>>
>>
>>>
>>> As I have said before any help would be very appreciated...no matter
>>> whom will give it
>>> Thanks for all in advance
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com>:
>>>
 Hello Simone and all the comunity,

 I have been doing the instalation of ovirt hosted engine again and
 it fails, libvirtd and vdsmd services are failing. They are failing 
 with
 the following errors:


 libvirt daemon

   libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
 enabled; vendor preset: enabled)
   Drop-In: /etc/systemd/system/libvirtd.service.d
  

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there again,
>
> Yes as I say, I have done several clean installations and the VM engine
> sometimes starts without any problem. So Simone any recommendation to make
> the engine VM starts properly?¿
>
> While is installing the HA agent and HA broker are down, would I get good
> result by starting the services myself?¿
>
> Any help from Simone or somebody would be appreciated
> Thanks for all in advance
> Manuel Luis Aznar
>

I suggest to check libvirt logs.


>
> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :
>
>>
>>
>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> I have been looking in the internet using google why my installation of
>>> ovirt-hosted-engine is failing.
>>>
>>> I have found this link:
>>>
>>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
>>> engine install failed; vdsm upset about broker)
>>>
>>> It seems to be the same error...
>>>
>>> So to knarra and Jamie Lawrence my question is:
>>>
>>> Did you manage to discover the problem?? In my instalation I am
>>> using nfs and not gluster...
>>>
>>> I have read the error and is the same error "BrokerConnectionError:
>>> ...". The ovirt-ha-agent and ovirt-ha-broker did not start when the
>>> installation is creating the engine VM...
>>>
>>
>> This is just a false positive: the HA agent and the HA broker are still
>> down so vdsm is complaining but at that point it's absolutely fine by
>> itself since the engine VM still doesn't exists.
>> We already have an open bug to reduce the impact of that message.
>>
>> The real issue is that for some reason the engine VM could not start on
>> your system.
>>
>>
>>>
>>> As I have said before any help would be very appreciated...no matter
>>> whom will give it
>>> Thanks for all in advance
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com>:
>>>
 Hello Simone and all the comunity,

 I have been doing the instalation of ovirt hosted engine again and it
 fails, libvirtd and vdsmd services are failing. They are failing with the
 following errors:


 libvirt daemon

   libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
 vendor preset: enabled)
   Drop-In: /etc/systemd/system/libvirtd.service.d
ââunlimited-core.conf
Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min
 ago
  Docs: man:libvirtd(8)
http://libvirt.org
  Main PID: 21993 (libvirtd)
CGroup: /system.slice/libvirtd.service
ââ21993 /usr/sbin/libvirtd --listen

 may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
 daemon...
 may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
 daemon.
 may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version:
 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem ,
 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
 may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname:
 host1.bajada.es
 may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar
 con el socket de monitor: No existe el proceso
 may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error:
 process exited while connecting to monitor: /dev/random -device
 virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg timestamp=on
  Could not access KVM
 kernel module: Permission denied
  failed to initialize
 KVM: Permission denied

 vdsm daemon

   vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
 vendor preset: enabled)
Active: active (running) since lun 2017-05-01 11:43:51 WEST; 15min
 ago
  Main PID: 22119 (vdsm)
CGroup: /system.slice/vdsmd.service
ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
 --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
 --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
 --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
 --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10

 may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
 ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to
 connect to broker, the number of errors has exceeded the limit (1)
 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there again,

Yes as I say, I have done several clean installations and the VM engine
sometimes starts without any problem. So Simone any recommendation to make
the engine VM starts properly?¿

While is installing the HA agent and HA broker are down, would I get good
result by starting the services myself?¿

Any help from Simone or somebody would be appreciated
Thanks for all in advance
Manuel Luis Aznar

2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :

>
>
> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello there,
>>
>> I have been looking in the internet using google why my installation of
>> ovirt-hosted-engine is failing.
>>
>> I have found this link:
>>
>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
>> engine install failed; vdsm upset about broker)
>>
>> It seems to be the same error...
>>
>> So to knarra and Jamie Lawrence my question is:
>>
>> Did you manage to discover the problem?? In my instalation I am using
>> nfs and not gluster...
>>
>> I have read the error and is the same error "BrokerConnectionError: ...".
>> The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
>> is creating the engine VM...
>>
>
> This is just a false positive: the HA agent and the HA broker are still
> down so vdsm is complaining but at that point it's absolutely fine by
> itself since the engine VM still doesn't exists.
> We already have an open bug to reduce the impact of that message.
>
> The real issue is that for some reason the engine VM could not start on
> your system.
>
>
>>
>> As I have said before any help would be very appreciated...no matter whom
>> will give it
>> Thanks for all in advance
>> Manuel Luis Aznar
>>
>>
>>
>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar > >:
>>
>>> Hello Simone and all the comunity,
>>>
>>> I have been doing the instalation of ovirt hosted engine again and it
>>> fails, libvirtd and vdsmd services are failing. They are failing with the
>>> following errors:
>>>
>>>
>>> libvirt daemon
>>>
>>>   libvirtd.service - Virtualization daemon
>>>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>>> vendor preset: enabled)
>>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>>ââunlimited-core.conf
>>>Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min ago
>>>  Docs: man:libvirtd(8)
>>>http://libvirt.org
>>>  Main PID: 21993 (libvirtd)
>>>CGroup: /system.slice/libvirtd.service
>>>ââ21993 /usr/sbin/libvirtd --listen
>>>
>>> may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
>>> daemon...
>>> may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
>>> daemon.
>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version:
>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem ,
>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname:
>>> host1.bajada.es
>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar con
>>> el socket de monitor: No existe el proceso
>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error:
>>> process exited while connecting to monitor: /dev/random -device
>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg timestamp=on
>>>  Could not access KVM
>>> kernel module: Permission denied
>>>  failed to initialize
>>> KVM: Permission denied
>>>
>>> vdsm daemon
>>>
>>>   vdsmd.service - Virtual Desktop Server Manager
>>>Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
>>> vendor preset: enabled)
>>>Active: active (running) since lun 2017-05-01 11:43:51 WEST; 15min ago
>>>  Main PID: 22119 (vdsm)
>>>CGroup: /system.slice/vdsmd.service
>>>ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
>>>ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
>>> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
>>>ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
>>> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
>>>ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
>>> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
>>>ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
>>> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10
>>>
>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to
>>> connect to broker, the number of errors has exceeded the limit (1)
>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR failed to
>>> retrieve Hosted Engine HA info
>>>  Traceback (most recent call
>>> last):
>>>File
>>> 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there,
>
> I have been looking in the internet using google why my installation of
> ovirt-hosted-engine is failing.
>
> I have found this link:
>
>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
> engine install failed; vdsm upset about broker)
>
> It seems to be the same error...
>
> So to knarra and Jamie Lawrence my question is:
>
> Did you manage to discover the problem?? In my instalation I am using
> nfs and not gluster...
>
> I have read the error and is the same error "BrokerConnectionError: ...".
> The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
> is creating the engine VM...
>

This is just a false positive: the HA agent and the HA broker are still
down so vdsm is complaining but at that point it's absolutely fine by
itself since the engine VM still doesn't exists.
We already have an open bug to reduce the impact of that message.

The real issue is that for some reason the engine VM could not start on
your system.


>
> As I have said before any help would be very appreciated...no matter whom
> will give it
> Thanks for all in advance
> Manuel Luis Aznar
>
>
>
> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar 
> :
>
>> Hello Simone and all the comunity,
>>
>> I have been doing the instalation of ovirt hosted engine again and it
>> fails, libvirtd and vdsmd services are failing. They are failing with the
>> following errors:
>>
>>
>> libvirt daemon
>>
>>   libvirtd.service - Virtualization daemon
>>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>> vendor preset: enabled)
>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>ââunlimited-core.conf
>>Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min ago
>>  Docs: man:libvirtd(8)
>>http://libvirt.org
>>  Main PID: 21993 (libvirtd)
>>CGroup: /system.slice/libvirtd.service
>>ââ21993 /usr/sbin/libvirtd --listen
>>
>> may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
>> daemon...
>> may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
>> daemon.
>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version: 2.0.0,
>> package: 10.el7_3.5 (CentOS BuildSystem ,
>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname:
>> host1.bajada.es
>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar con
>> el socket de monitor: No existe el proceso
>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error: process
>> exited while connecting to monitor: /dev/random -device
>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg timestamp=on
>>  Could not access KVM
>> kernel module: Permission denied
>>  failed to initialize
>> KVM: Permission denied
>>
>> vdsm daemon
>>
>>   vdsmd.service - Virtual Desktop Server Manager
>>Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
>> vendor preset: enabled)
>>Active: active (running) since lun 2017-05-01 11:43:51 WEST; 15min ago
>>  Main PID: 22119 (vdsm)
>>CGroup: /system.slice/vdsmd.service
>>ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
>>ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
>> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
>>ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
>> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
>>ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
>> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
>>ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
>> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10
>>
>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
>> to broker, the number of errors has exceeded the limit (1)
>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR failed to
>> retrieve Hosted Engine HA info
>>  Traceback (most recent call
>> last):
>>File
>> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in
>> _getHaInfo
>>  stats =
>> instance.get_all_stats()
>>File
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>> line 102, in get_all_stats
>>  with
>> broker.connection(self._retries, self._wait):
>>File
>> "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
>>  return 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Sahina Bose]

On Mon, May 1, 2017 at 9:39 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there Sahina Bose
>
> First of all thanks for your answer...
>
> Yeah it seems there is a problem creating the Hosted Engine VM (I mean the
> VM that will have the ovirt-engine). I have done the installation before
> and sometimes fails and others not...
>
> To the question: Which version on qemu-kvm are you using?
>
> [root@host1 manuel]# yum list | grep qemu-kvm
> qemu-kvm-common-ev.x86_64  10:2.6.0-28.el7_3.9.1
> @ovirt-4.1-snapshot
> qemu-kvm-ev.x86_64 10:2.6.0-28.el7_3.9.1
> @ovirt-4.1-snapshot
> qemu-kvm-ev-debuginfo.x86_64   10:2.6.0-28.el7_3.9.1
> @ovirt-4.1-snapshot
> qemu-kvm-tools-ev.x86_64   10:2.6.0-28.el7_3.9.1
> @ovirt-4.1-snapshot
> qemu-kvm.x86_6410:1.5.3-126.el7_3.6
>  updates
> qemu-kvm-common.x86_64 10:1.5.3-126.el7_3.6
>  updates
> qemu-kvm-tools.x86_64  10:1.5.3-126.el7_3.6
>  updates
>
> It seems I am using version 2.6.0. Do you know which version is fine?¿?
>


qemu version looks to be fine, but adding virt team if they know the cause
of error.

"Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied"


>
> Thanks for all in advance
> I will be waiting for an answer
> Manuel Luis Aznar
>
>
> 2017-05-01 16:07 GMT+01:00 Sahina Bose :
>
>> There's an error creating the HE VM. Which version on qemu-kvm are you
>> using?
>>
>> 2017-05-01 11:47:45,038+0100 ERROR (vm/92faf919) [virt.vm]
>> (vmId='92faf919-b7b1-42dc-a70c-15c6eb32ba2f') The vm start process
>> failed (vm:632)
>> Traceback (most recent call last):
>>   File "/usr/share/vdsm/virt/vm.py", line 563, in _startUnderlyingVm
>> self._run()
>>   File "/usr/share/vdsm/virt/vm.py", line 2021, in _run
>> self._connection.createXML(domxml, flags),
>>   File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py",
>> line 123, in wrapper
>> ret = f(*args, **kwargs)
>>   File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 941, in
>> wrapper
>> return func(inst, *args, **kwargs)
>>   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3782, in
>> createXML
>> if ret is None:raise libvirtError('virDomainCreateXML() failed',
>> conn=self)
>> libvirtError: internal error: process exited while connecting to monitor:
>> /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
>> -msg timestamp=on
>> Could not access KVM kernel module: Permission denied
>> failed to initialize KVM: Permission denied
>>
>>
>> On Mon, May 1, 2017 at 6:44 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> I have been looking in the internet using google why my installation of
>>> ovirt-hosted-engine is failing.
>>>
>>> I have found this link:
>>>
>>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
>>> engine install failed; vdsm upset about broker)
>>>
>>> It seems to be the same error...
>>>
>>> So to knarra and Jamie Lawrence my question is:
>>>
>>> Did you manage to discover the problem?? In my instalation I am using
>>> nfs and not gluster...
>>>
>>> I have read the error and is the same error "BrokerConnectionError: ...".
>>> The ovirt-ha-agent and ovirt-ha-broker did not start when the
>>> installation
>>> is creating the engine VM...
>>>
>>> As I have said before any help would be very appreciated...no matter whom
>>> will give it
>>> Thanks for all in advance
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com>:
>>>
>>> > Hello Simone and all the comunity,
>>> >
>>> > I have been doing the instalation of ovirt hosted engine again and it
>>> > fails, libvirtd and vdsmd services are failing. They are failing with
>>> the
>>> > following errors:
>>> >
>>> >
>>> > libvirt daemon
>>> >
>>> >   libvirtd.service - Virtualization daemon
>>> >Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>>> > vendor preset: enabled)
>>> >   Drop-In: /etc/systemd/system/libvirtd.service.d
>>> >ââunlimited-core.conf
>>> >Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min
>>> ago
>>> >  Docs: man:libvirtd(8)
>>> >http://libvirt.org
>>> >  Main PID: 21993 (libvirtd)
>>> >CGroup: /system.slice/libvirtd.service
>>> >ââ21993 /usr/sbin/libvirtd --listen
>>> >
>>> > may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
>>> > daemon...
>>> > may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
>>> daemon
>>>
>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there Sahina Bose

First of all thanks for your answer...

Yeah it seems there is a problem creating the Hosted Engine VM (I mean the
VM that will have the ovirt-engine). I have done the installation before
and sometimes fails and others not...

To the question: Which version on qemu-kvm are you using?

[root@host1 manuel]# yum list | grep qemu-kvm
qemu-kvm-common-ev.x86_64  10:2.6.0-28.el7_3.9.1
@ovirt-4.1-snapshot
qemu-kvm-ev.x86_64 10:2.6.0-28.el7_3.9.1
@ovirt-4.1-snapshot
qemu-kvm-ev-debuginfo.x86_64   10:2.6.0-28.el7_3.9.1
@ovirt-4.1-snapshot
qemu-kvm-tools-ev.x86_64   10:2.6.0-28.el7_3.9.1
@ovirt-4.1-snapshot
qemu-kvm.x86_6410:1.5.3-126.el7_3.6
 updates
qemu-kvm-common.x86_64 10:1.5.3-126.el7_3.6
 updates
qemu-kvm-tools.x86_64  10:1.5.3-126.el7_3.6
 updates

It seems I am using version 2.6.0. Do you know which version is fine?¿?

Thanks for all in advance
I will be waiting for an answer
Manuel Luis Aznar


2017-05-01 16:07 GMT+01:00 Sahina Bose :

> There's an error creating the HE VM. Which version on qemu-kvm are you
> using?
>
> 2017-05-01 11:47:45,038+0100 ERROR (vm/92faf919) [virt.vm]
> (vmId='92faf919-b7b1-42dc-a70c-15c6eb32ba2f') The vm start process failed
> (vm:632)
> Traceback (most recent call last):
>   File "/usr/share/vdsm/virt/vm.py", line 563, in _startUnderlyingVm
> self._run()
>   File "/usr/share/vdsm/virt/vm.py", line 2021, in _run
> self._connection.createXML(domxml, flags),
>   File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
> 123, in wrapper
> ret = f(*args, **kwargs)
>   File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 941, in
> wrapper
> return func(inst, *args, **kwargs)
>   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3782, in
> createXML
> if ret is None:raise libvirtError('virDomainCreateXML() failed',
> conn=self)
> libvirtError: internal error: process exited while connecting to monitor:
> /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
> -msg timestamp=on
> Could not access KVM kernel module: Permission denied
> failed to initialize KVM: Permission denied
>
>
> On Mon, May 1, 2017 at 6:44 PM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello there,
>>
>> I have been looking in the internet using google why my installation of
>> ovirt-hosted-engine is failing.
>>
>> I have found this link:
>>
>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
>> engine install failed; vdsm upset about broker)
>>
>> It seems to be the same error...
>>
>> So to knarra and Jamie Lawrence my question is:
>>
>> Did you manage to discover the problem?? In my instalation I am using
>> nfs and not gluster...
>>
>> I have read the error and is the same error "BrokerConnectionError: ...".
>> The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
>> is creating the engine VM...
>>
>> As I have said before any help would be very appreciated...no matter whom
>> will give it
>> Thanks for all in advance
>> Manuel Luis Aznar
>>
>>
>>
>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar > >:
>>
>> > Hello Simone and all the comunity,
>> >
>> > I have been doing the instalation of ovirt hosted engine again and it
>> > fails, libvirtd and vdsmd services are failing. They are failing with
>> the
>> > following errors:
>> >
>> >
>> > libvirt daemon
>> >
>> >   libvirtd.service - Virtualization daemon
>> >Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>> > vendor preset: enabled)
>> >   Drop-In: /etc/systemd/system/libvirtd.service.d
>> >ââunlimited-core.conf
>> >Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min
>> ago
>> >  Docs: man:libvirtd(8)
>> >http://libvirt.org
>> >  Main PID: 21993 (libvirtd)
>> >CGroup: /system.slice/libvirtd.service
>> >ââ21993 /usr/sbin/libvirtd --listen
>> >
>> > may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
>> > daemon...
>> > may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
>> daemon
>>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Sahina Bose]

There's an error creating the HE VM. Which version on qemu-kvm are you
using?

2017-05-01 11:47:45,038+0100 ERROR (vm/92faf919) [virt.vm]
(vmId='92faf919-b7b1-42dc-a70c-15c6eb32ba2f') The vm start process failed
(vm:632)
Traceback (most recent call last):
  File "/usr/share/vdsm/virt/vm.py", line 563, in _startUnderlyingVm
self._run()
  File "/usr/share/vdsm/virt/vm.py", line 2021, in _run
self._connection.createXML(domxml, flags),
  File "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
123, in wrapper
ret = f(*args, **kwargs)
  File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 941, in
wrapper
return func(inst, *args, **kwargs)
  File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3782, in
createXML
if ret is None:raise libvirtError('virDomainCreateXML() failed',
conn=self)
libvirtError: internal error: process exited while connecting to monitor:
/dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7
-msg timestamp=on
Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied


On Mon, May 1, 2017 at 6:44 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there,
>
> I have been looking in the internet using google why my installation of
> ovirt-hosted-engine is failing.
>
> I have found this link:
>
>  https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
> engine install failed; vdsm upset about broker)
>
> It seems to be the same error...
>
> So to knarra and Jamie Lawrence my question is:
>
> Did you manage to discover the problem?? In my instalation I am using
> nfs and not gluster...
>
> I have read the error and is the same error "BrokerConnectionError: ...".
> The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
> is creating the engine VM...
>
> As I have said before any help would be very appreciated...no matter whom
> will give it
> Thanks for all in advance
> Manuel Luis Aznar
>
>
>
> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar  >:
>
> > Hello Simone and all the comunity,
> >
> > I have been doing the instalation of ovirt hosted engine again and it
> > fails, libvirtd and vdsmd services are failing. They are failing with the
> > following errors:
> >
> >
> > libvirt daemon
> >
> >   libvirtd.service - Virtualization daemon
> >Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
> > vendor preset: enabled)
> >   Drop-In: /etc/systemd/system/libvirtd.service.d
> >ââunlimited-core.conf
> >Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min ago
> >  Docs: man:libvirtd(8)
> >http://libvirt.org
> >  Main PID: 21993 (libvirtd)
> >CGroup: /system.slice/libvirtd.service
> >ââ21993 /usr/sbin/libvirtd --listen
> >
> > may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
> > daemon...
> > may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization
> daemon
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there,

I have been looking in the internet using google why my installation of
ovirt-hosted-engine is failing.

I have found this link:

 https://www.mail-archive.com/users@ovirt.org/msg40864.html (Hosted
engine install failed; vdsm upset about broker)

It seems to be the same error...

So to knarra and Jamie Lawrence my question is:

Did you manage to discover the problem?? In my instalation I am using
nfs and not gluster...

I have read the error and is the same error "BrokerConnectionError: ...".
The ovirt-ha-agent and ovirt-ha-broker did not start when the installation
is creating the engine VM...

As I have said before any help would be very appreciated...no matter whom
will give it
Thanks for all in advance
Manuel Luis Aznar



2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar :

> Hello Simone and all the comunity,
>
> I have been doing the instalation of ovirt hosted engine again and it
> fails, libvirtd and vdsmd services are failing. They are failing with the
> following errors:
>
>
> libvirt daemon
>
>   libvirtd.service - Virtualization daemon
>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
> vendor preset: enabled)
>   Drop-In: /etc/systemd/system/libvirtd.service.d
>ââunlimited-core.conf
>Active: active (running) since lun 2017-05-01 11:43:49 WEST; 14min ago
>  Docs: man:libvirtd(8)
>http://libvirt.org
>  Main PID: 21993 (libvirtd)
>CGroup: /system.slice/libvirtd.service
>ââ21993 /usr/sbin/libvirtd --listen
>
> may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization
> daemon...
> may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization daemon.
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version: 2.0.0,
> package: 10.el7_3.5 (CentOS BuildSystem ,
> 2017-03-03-02:09:45, c1bm.rdu2.centos.org)
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname: host1.bajada.es
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar con
> el socket de monitor: No existe el proceso
> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error: process
> exited while connecting to monitor: /dev/random -device
> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg timestamp=on
>  Could not access KVM
> kernel module: Permission denied
>  failed to initialize KVM:
> Permission denied
>
> vdsm daemon
>
>   vdsmd.service - Virtual Desktop Server Manager
>Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor
> preset: enabled)
>Active: active (running) since lun 2017-05-01 11:43:51 WEST; 15min ago
>  Main PID: 22119 (vdsm)
>CGroup: /system.slice/vdsmd.service
>ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm
>ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68
> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10
>ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76
> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10
>ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44
> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10
>ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52
> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10
>
> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm
> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
> to broker, the number of errors has exceeded the limit (1)
> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR failed to
> retrieve Hosted Engine HA info
>  Traceback (most recent call
> last):
>File
> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in
> _getHaInfo
>  stats =
> instance.get_all_stats()
>File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 102, in get_all_stats
>  with
> broker.connection(self._retries, self._wait):
>File 
> "/usr/lib64/python2.7/contextlib.py",
> line 17, in __enter__
>  return self.gen.next()
>File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 99, in connection
>  self.connect(retries,
> wait)
>File
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 78, in connect
>  raise
> BrokerConnectionError(error_msg)
>  BrokerConnectionError: 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there again,

Yes that is correct. I interrupted the setup with Ctrl+C. That was because
while I was answering, at the same time, I was looking at this file, and I
saw this:

FAILED: conflicting vdsm and libvirt-qemu tls configuration.
vdsm.conf with ssl=True requires the following changes:
libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
qemu.conf: spice_tls=1.

So I decided to interrupt the installation, because of the error, edit the
files (vdsm.conf and qemu.conf) and then I executed the installation again
and it was successful. It seams that the change of the values in that
files, in my case, produced a successful instalation.

Sorry if my english is hard to understand, now you understand what I did.

Any question, remark just go ahead

Thanks,
Manuel



2017-03-15 11:22 GMT+00:00 Simone Tiraboschi :

>
>
> On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar <
> manuel.luis.az...@gmail.com> wrote:
>
>> Hello Simone,
>>
>> The quoted lines on your last message are on lines 1238-1245 on the
>> attached log ovirt-hosted-engine-setup file.
>>
>> That file is the first hosted-engine setup. But this log file is not the
>> result of a host-engine-setup file. I start with the installation and while
>> I was answering the question I was looking to this log file for errors and
>> when I found this errors I stopped and done this:
>>
>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>> vdsm.conf with ssl=True requires the following changes:
>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>> qemu.conf: spice_tls=1.
>>
>> Previously to this installation I have done several installations without
>> revising this log file and always getting failed installations.
>>
>> Please its important to note that:
>>
>>  The currently setup which we are talking about was using repo 
>> "ovirt-release41-pre.rpm".
>> After correcting that two files I do the installation and in the end it was
>> completed successfully.
>>
>> When I have some time I will try to install again using the realease repo
>> "ovirt-release41.rpm"
>>
>> If you have any explanation, question or remark, please go ahead...
>>
>
> From the attached logs it seams that you voluntary interrupted the setup
> from keyboard here:
> 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human
> dialog.__logString:204 DIALOG:SEND iptables was detected on
> your computer, do you wish setup to configure it? (Yes, No)[Yes]:
> 2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142 method
> exception
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in
> _executeMethod
> method['method']()
>   File "/usr/share/ovirt-hosted-engine-setup/scripts/../
> plugins/gr-he-setup/network/firewall_manager.py", line 157, in
> _customization
> default=_('Yes'),
>   File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 177, in
> queryString
> value = self._readline(hidden=hidden)
>   File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in
> _readline
> value = self.__input.readline()
>   File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in
> _signal
> raise RuntimeError("SIG%s" % signum)
> RuntimeError: SIG2
>
>
>
>>
>> I will report back.
>> Thanks for all in advance
>> Manuel
>>
>> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi :
>>
>>>
>>>
>>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com> wrote:
>>>
 Hello to all there again,

 I was having some troubles while installing ovirt Hosted Engine, I took
 some look at the hosted engine setup logs while I was running the
 hosted-engine --deploy and I found the following in the ovirt hosted engine
 setup logs:

 lvm requires configuration
 libvirt is not configured for vdsm yet
 FAILED: conflicting vdsm and libvirt-qemu tls configuration.
 vdsm.conf with ssl=True requires the following changes:
 libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
 qemu.conf: spice_tls=1.


>>> hosted-engine setup is already running vdsm-tool configure --force so it
>>> should configure libvirt and qemu for you, not sure why it failed.
>>> Could you please attach the logs from the failed hosted-engine-setup run?
>>>
>>>
 When I saw this I stopped the setup and edited this two files
 (vdsm.conf and qemu.conf) set the stated configurations and run the deploy
 again. All was fine and I dont have any trouble the installation finished
 successfully. This was using ovirt-release41-pre.rpm repo.

 I will be trying the same installation with ovirt-release41.rpm (when I
 have time) and I will report what happened.

 Thanks for all
 Manuel Luis Aznar



 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <
 manuel.luis.az...@gmail.com>:

> Hey there,
>
> I have been loking 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello Simone,
>
> The quoted lines on your last message are on lines 1238-1245 on the
> attached log ovirt-hosted-engine-setup file.
>
> That file is the first hosted-engine setup. But this log file is not the
> result of a host-engine-setup file. I start with the installation and while
> I was answering the question I was looking to this log file for errors and
> when I found this errors I stopped and done this:
>
> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
> vdsm.conf with ssl=True requires the following changes:
> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
> qemu.conf: spice_tls=1.
>
> Previously to this installation I have done several installations without
> revising this log file and always getting failed installations.
>
> Please its important to note that:
>
>  The currently setup which we are talking about was using repo 
> "ovirt-release41-pre.rpm".
> After correcting that two files I do the installation and in the end it was
> completed successfully.
>
> When I have some time I will try to install again using the realease repo "
> ovirt-release41.rpm"
>
> If you have any explanation, question or remark, please go ahead...
>

>From the attached logs it seams that you voluntary interrupted the setup
from keyboard here:
2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human
dialog.__logString:204 DIALOG:SEND iptables was detected on
your computer, do you wish setup to configure it? (Yes, No)[Yes]:
2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142 method
exception
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in
_executeMethod
method['method']()
  File
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py",
line 157, in _customization
default=_('Yes'),
  File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 177, in
queryString
value = self._readline(hidden=hidden)
  File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in
_readline
value = self.__input.readline()
  File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in _signal
raise RuntimeError("SIG%s" % signum)
RuntimeError: SIG2



>
> I will report back.
> Thanks for all in advance
> Manuel
>
> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi :
>
>>
>>
>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello to all there again,
>>>
>>> I was having some troubles while installing ovirt Hosted Engine, I took
>>> some look at the hosted engine setup logs while I was running the
>>> hosted-engine --deploy and I found the following in the ovirt hosted engine
>>> setup logs:
>>>
>>> lvm requires configuration
>>> libvirt is not configured for vdsm yet
>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
>>> vdsm.conf with ssl=True requires the following changes:
>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
>>> qemu.conf: spice_tls=1.
>>>
>>>
>> hosted-engine setup is already running vdsm-tool configure --force so it
>> should configure libvirt and qemu for you, not sure why it failed.
>> Could you please attach the logs from the failed hosted-engine-setup run?
>>
>>
>>> When I saw this I stopped the setup and edited this two files (vdsm.conf
>>> and qemu.conf) set the stated configurations and run the deploy again. All
>>> was fine and I dont have any trouble the installation finished
>>> successfully. This was using ovirt-release41-pre.rpm repo.
>>>
>>> I will be trying the same installation with ovirt-release41.rpm (when I
>>> have time) and I will report what happened.
>>>
>>> Thanks for all
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar >> >:
>>>
 Hey there,

 I have been loking around, of course as of now the following I am going
 to say I suppose is not anything new to you:

 This is the status of libvirtd:

 â libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
 vendor preset: enabled)
   Drop-In: /etc/systemd/system/libvirtd.service.d
ââunlimited-core.conf
Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s
 ago
  Docs: man:libvirtd(8)
http://libvirt.org
  Main PID: 24350 (libvirtd)
CGroup: /system.slice/libvirtd.service
ââ24350 /usr/sbin/libvirtd --listen

 mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
 daemon...
 mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
 daemon.


 After looking at the state I fire up the VM engine with the command
 "hosted-engine --vm-start" and I got the following:

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello to all there again,
>
> I was having some troubles while installing ovirt Hosted Engine, I took
> some look at the hosted engine setup logs while I was running the
> hosted-engine --deploy and I found the following in the ovirt hosted engine
> setup logs:
>
> lvm requires configuration
> libvirt is not configured for vdsm yet
> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
> vdsm.conf with ssl=True requires the following changes:
> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
> qemu.conf: spice_tls=1.
>
>
hosted-engine setup is already running vdsm-tool configure --force so it
should configure libvirt and qemu for you, not sure why it failed.
Could you please attach the logs from the failed hosted-engine-setup run?


> When I saw this I stopped the setup and edited this two files (vdsm.conf
> and qemu.conf) set the stated configurations and run the deploy again. All
> was fine and I dont have any trouble the installation finished
> successfully. This was using ovirt-release41-pre.rpm repo.
>
> I will be trying the same installation with ovirt-release41.rpm (when I
> have time) and I will report what happened.
>
> Thanks for all
> Manuel Luis Aznar
>
>
>
> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar :
>
>> Hey there,
>>
>> I have been loking around, of course as of now the following I am going
>> to say I suppose is not anything new to you:
>>
>> This is the status of libvirtd:
>>
>> â libvirtd.service - Virtualization daemon
>>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>> vendor preset: enabled)
>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>ââunlimited-core.conf
>>Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s
>> ago
>>  Docs: man:libvirtd(8)
>>http://libvirt.org
>>  Main PID: 24350 (libvirtd)
>>CGroup: /system.slice/libvirtd.service
>>ââ24350 /usr/sbin/libvirtd --listen
>>
>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
>> daemon...
>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization
>> daemon.
>>
>>
>> After looking at the state I fire up the VM engine with the command
>> "hosted-engine --vm-start" and I got the following:
>>
>>
>> VM exists and is down, destroying it
>> Machine destroyed
>>
>> ed786811-0321-431e-be4b-2d03764c1b02
>> Status = WaitForLaunch
>> nicModel = rtl8139,pv
>> statusTime = 4374100040 <(437)%20410-0040>
>> emulatedMachine = pc
>> pid = 0
>> vmName = HostedEngine
>> devices = [{'index': '2', 'iface': 'ide', 'specParams': {},
>> 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381',
>> 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0',
>> 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type':
>> 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder':
>> '1', 'poolID': '----', 'volumeID':
>> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID':
>> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, 'readonly':
>> 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', 'optional':
>> 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'address':
>> {'slot': '0x06', 'bus': '0x00', 'domain': '0x', 'type': 'pci',
>> 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive',
>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model':
>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr':
>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt',
>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a',
>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x', 'type':
>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'},
>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId':
>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'}, {'device':
>> 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio',
>> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}]
>> guestDiskMapping = {}
>> vmType = kvm
>> clientIp =
>> displaySecurePort = -1
>> memSize = 4096
>> displayPort = -1
>> cpuType = Broadwell
>> spiceSecureChannels = smain,sdisplay,sinputs,scursor
>> ,splayback,srecord,ssmartcard,susbredir
>> smp = 2
>> displayIp = 0
>> display = vnc
>> maxVCpus = 6
>>
>>
>> After that if I look again at the status of libvirtd I obtain:
>>
>>
>> â libvirtd.service - Virtualization daemon
>>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
>> vendor preset: enabled)
>>   Drop-In: /etc/systemd/system/libvirtd.service.d
>>ââunlimited-core.conf
>>Active: active 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello to all there again,

I was having some troubles while installing ovirt Hosted Engine, I took
some look at the hosted engine setup logs while I was running the
hosted-engine --deploy and I found the following in the ovirt hosted engine
setup logs:

lvm requires configuration
libvirt is not configured for vdsm yet
FAILED: conflicting vdsm and libvirt-qemu tls configuration.
vdsm.conf with ssl=True requires the following changes:
libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
qemu.conf: spice_tls=1.

When I saw this I stopped the setup and edited this two files (vdsm.conf
and qemu.conf) set the stated configurations and run the deploy again. All
was fine and I dont have any trouble the installation finished
successfully. This was using ovirt-release41-pre.rpm repo.

I will be trying the same installation with ovirt-release41.rpm (when I
have time) and I will report what happened.

Thanks for all
Manuel Luis Aznar



2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar :

> Hey there,
>
> I have been loking around, of course as of now the following I am going to
> say I suppose is not anything new to you:
>
> This is the status of libvirtd:
>
> â libvirtd.service - Virtualization daemon
>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
> vendor preset: enabled)
>   Drop-In: /etc/systemd/system/libvirtd.service.d
>ââunlimited-core.conf
>Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s ago
>  Docs: man:libvirtd(8)
>http://libvirt.org
>  Main PID: 24350 (libvirtd)
>CGroup: /system.slice/libvirtd.service
>ââ24350 /usr/sbin/libvirtd --listen
>
> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
> daemon...
> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization daemon.
>
>
> After looking at the state I fire up the VM engine with the command
> "hosted-engine --vm-start" and I got the following:
>
>
> VM exists and is down, destroying it
> Machine destroyed
>
> ed786811-0321-431e-be4b-2d03764c1b02
> Status = WaitForLaunch
> nicModel = rtl8139,pv
> statusTime = 4374100040 <(437)%20410-0040>
> emulatedMachine = pc
> pid = 0
> vmName = HostedEngine
> devices = [{'index': '2', 'iface': 'ide', 'specParams': {},
> 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381',
> 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0',
> 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type':
> 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder':
> '1', 'poolID': '----', 'volumeID':
> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID':
> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, 'readonly':
> 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', 'optional':
> 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'address':
> {'slot': '0x06', 'bus': '0x00', 'domain': '0x', 'type': 'pci',
> 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive',
> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model':
> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr':
> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt',
> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a',
> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x', 'type':
> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'},
> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId':
> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'}, {'device':
> 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio',
> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}]
> guestDiskMapping = {}
> vmType = kvm
> clientIp =
> displaySecurePort = -1
> memSize = 4096
> displayPort = -1
> cpuType = Broadwell
> spiceSecureChannels = smain,sdisplay,sinputs,
> scursor,splayback,srecord,ssmartcard,susbredir
> smp = 2
> displayIp = 0
> display = vnc
> maxVCpus = 6
>
>
> After that if I look again at the status of libvirtd I obtain:
>
>
> â libvirtd.service - Virtualization daemon
>Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled;
> vendor preset: enabled)
>   Drop-In: /etc/systemd/system/libvirtd.service.d
>ââunlimited-core.conf
>Active: active (running) since lun 2017-03-06 01:25:05 WET; 5min ago
>  Docs: man:libvirtd(8)
>http://libvirt.org
>  Main PID: 24350 (libvirtd)
>CGroup: /system.slice/libvirtd.service
>ââ24350 /usr/sbin/libvirtd --listen
>
> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization
> daemon...
> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization daemon.
> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Artyom Lukianov]

I found this one under the vdsm log:
libvirtError: internal error: process exited while connecting to monitor:
Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied
Thread-70::INFO::2017-03-05
16:00:04,325::vm::1330::virt.vm::(setDownStatus)
vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state to Down:
internal error: process exited while connecting to monitor: Could not
access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied (code=1)
Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop)
vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping connection
Thread-70::DEBUG::2017-03-05
16:00:04,325::vmchannels::238::vds::(unregister) Delete fileno 52 from
listener.
Thread-70::DEBUG::2017-03-05
16:00:04,325::vmchannels::66::vds::(_unregister_fd) Failed to unregister FD
from epoll (ENOENT): 52
Thread-70::DEBUG::2017-03-05
16:00:04,326::__init__::209::jsonrpc.Notification::(emit) Sending event
{"params": {"ed786811-0321-431e-be4b-2d03764c1b02": {"status": "Down",
"exitReason": 1, "exitMessage": "internal error: process exited while
connecting to monitor: Could not access KVM kernel module: Permission
denied\nfailed to initialize KVM: Permission denied", "exitCode": 1},
"notify_time": 4339924730}, "jsonrpc": "2.0", "method":
"|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"}

Can you check if you have KVM modules loaded? Also, check group owner for "
/dev/kvm".
Best Regards


On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there again,
>
> The error on the first email was using the repo ovirt-release41.rpm (
> http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as I
> were getting the same error again and again I am currently trying with
> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/
> pub/yum-repo/ovirt-release41-snapshot.rpm) and the result is nearly the
> same.
>
> After creating the VM on the installation I got the same error with the
> command "systemctl status vdsmd":
>
> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed to
> retrieve Hosted Engine HA info
>
> Traceback (most recent call last):
>File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line
> 231, in _getHaInfo
>   stats = instance.get_all_stats()
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 102, in get_all_stats
>   with broker.connection(self._retries, self._wait):
>File "/usr/lib64/python2.7/contextlib.py", line 17, in
> __enter__
>   return self.gen.next()
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 99, in connection
>   self.connect(retries, wait)
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 78, in connect
>   raise BrokerConnectionError(error_msg)
>  BrokerConnectionError: Failed to connect to broker, the number of
> errors has exceeded the limit (1)
>
> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
> to broker, the number of errors has exceeded the limit (1)
>
> I have noticed that the ovirt-ha-agent and ovirt-ha-broker services was
> not running. I guess if this have something to do with the error in vsmd
> service log.
>
> But in this case the ovirt-hosted-engine-installation prints the vnc
> connection and I can connect to the engine VM.
>
> Thanks for all in advance
> Any help would be appreciated
> Manuel Luis Aznar
>
> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar 
> :
>
>> Hello there,
>>
>> I am having some trouble when deploying an oVirt 4.1 hosted engine
>> installation.
>>
>> When I m just to end the installation and the hosted engine setup script
>> is about to start the Vm engine (appliance) it fails saying "The VM is not
>> powring up".
>>
>> If I double check the service vdsmd i get this error all the time:
>>
>> vdsm root ERROR failed to retrieve Hosted Engine HA info
>>  Traceback (most recent call last):
>>  File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231,
>> in _getHaInfo
>>  stats = instance.get_all_stats()
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>> line 102, in get_all_stats
>>  with broker.connection(self._retries, self._wait):
>>  File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
>>  return self.gen.next()
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>> line 99, in connection
>>  self.connect(retries, wait)
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>> line 78, in connect
>>  raise 

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Artyom Lukianov]

Please provide the ovirt-hosted-engine-setup log.

Best Regards

On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello there again,
>
> The error on the first email was using the repo ovirt-release41.rpm (
> http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as I
> were getting the same error again and again I am currently trying with
> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/
> pub/yum-repo/ovirt-release41-snapshot.rpm) and the result is nearly the
> same.
>
> After creating the VM on the installation I got the same error with the
> command "systemctl status vdsmd":
>
> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed to
> retrieve Hosted Engine HA info
>
> Traceback (most recent call last):
>File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line
> 231, in _getHaInfo
>   stats = instance.get_all_stats()
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 102, in get_all_stats
>   with broker.connection(self._retries, self._wait):
>File "/usr/lib64/python2.7/contextlib.py", line 17, in
> __enter__
>   return self.gen.next()
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 99, in connection
>   self.connect(retries, wait)
>File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 78, in connect
>   raise BrokerConnectionError(error_msg)
>  BrokerConnectionError: Failed to connect to broker, the number of
> errors has exceeded the limit (1)
>
> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect
> to broker, the number of errors has exceeded the limit (1)
>
> I have noticed that the ovirt-ha-agent and ovirt-ha-broker services was
> not running. I guess if this have something to do with the error in vsmd
> service log.
>
> But in this case the ovirt-hosted-engine-installation prints the vnc
> connection and I can connect to the engine VM.
>
> Thanks for all in advance
> Any help would be appreciated
> Manuel Luis Aznar
>
> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar 
> :
>
>> Hello there,
>>
>> I am having some trouble when deploying an oVirt 4.1 hosted engine
>> installation.
>>
>> When I m just to end the installation and the hosted engine setup script
>> is about to start the Vm engine (appliance) it fails saying "The VM is not
>> powring up".
>>
>> If I double check the service vdsmd i get this error all the time:
>>
>> vdsm root ERROR failed to retrieve Hosted Engine HA info
>>  Traceback (most recent call last):
>>  File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231,
>> in _getHaInfo
>>  stats = instance.get_all_stats()
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
>> line 102, in get_all_stats
>>  with broker.connection(self._retries, self._wait):
>>  File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
>>  return self.gen.next()
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>> line 99, in connection
>>  self.connect(retries, wait)
>>  File 
>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
>> line 78, in connect
>>  raise BrokerConnectionError(error_msg)
>> BrokerConnectionError: Failed to connect to broker, the number of errors
>> has exceeded the limit (1)
>>
>> Did anyone have experimented the same problem?¿? Any hint on How to
>> solved it?¿? I have tried several times with clean installations and always
>> getting the same...
>>
>> The host where I am trying to do the installation have CentOS 7...
>>
>>
>> Thanks for all in advance
>> Will be waiting for any hint to see what I am doing wrong...
>> Manuel Luis Aznar
>>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there again,

The error on the first email was using the repo ovirt-release41.rpm (
http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as I were
getting the same error again and again I am currently trying with
ovirt-release41-snapshot.rpm (
http://resources.ovirt.org/pub/yum-repo/ovirt-release41-snapshot.rpm) and
the result is nearly the same.

After creating the VM on the installation I got the same error with the
command "systemctl status vdsmd":

mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed to
retrieve Hosted Engine HA info

Traceback (most recent call last):
   File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line
231, in _getHaInfo
  stats = instance.get_all_stats()
   File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 102, in get_all_stats
  with broker.connection(self._retries, self._wait):
   File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
  return self.gen.next()
   File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 99, in connection
  self.connect(retries, wait)
   File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 78, in connect
  raise BrokerConnectionError(error_msg)
 BrokerConnectionError: Failed to connect to broker, the number of
errors has exceeded the limit (1)

mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm
ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to
broker, the number of errors has exceeded the limit (1)

I have noticed that the ovirt-ha-agent and ovirt-ha-broker services was not
running. I guess if this have something to do with the error in vsmd
service log.

But in this case the ovirt-hosted-engine-installation prints the vnc
connection and I can connect to the engine VM.

Thanks for all in advance
Any help would be appreciated
Manuel Luis Aznar

2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar :

> Hello there,
>
> I am having some trouble when deploying an oVirt 4.1 hosted engine
> installation.
>
> When I m just to end the installation and the hosted engine setup script
> is about to start the Vm engine (appliance) it fails saying "The VM is not
> powring up".
>
> If I double check the service vdsmd i get this error all the time:
>
> vdsm root ERROR failed to retrieve Hosted Engine HA info
>  Traceback (most recent call last):
>  File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231,
> in _getHaInfo
>  stats = instance.get_all_stats()
>  File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 102, in get_all_stats
>  with broker.connection(self._retries, self._wait):
>  File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
>  return self.gen.next()
>  File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 99, in connection
>  self.connect(retries, wait)
>  File 
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 78, in connect
>  raise BrokerConnectionError(error_msg)
> BrokerConnectionError: Failed to connect to broker, the number of errors
> has exceeded the limit (1)
>
> Did anyone have experimented the same problem?¿? Any hint on How to solved
> it?¿? I have tried several times with clean installations and always
> getting the same...
>
> The host where I am trying to do the installation have CentOS 7...
>
>
> Thanks for all in advance
> Will be waiting for any hint to see what I am doing wrong...
> Manuel Luis Aznar
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Hosted Engine Setup fails

[Manuel Luis Aznar]

Hello there,

I am having some trouble when deploying an oVirt 4.1 hosted engine
installation.

When I m just to end the installation and the hosted engine setup script is
about to start the Vm engine (appliance) it fails saying "The VM is not
powring up".

If I double check the service vdsmd i get this error all the time:

vdsm root ERROR failed to retrieve Hosted Engine HA info
 Traceback (most recent call last):
 File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in
_getHaInfo
 stats = instance.get_all_stats()
 File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 102, in get_all_stats
 with broker.connection(self._retries, self._wait):
 File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__
 return self.gen.next()
 File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 99, in connection
 self.connect(retries, wait)
 File
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 78, in connect
 raise BrokerConnectionError(error_msg)
BrokerConnectionError: Failed to connect to broker, the number of errors
has exceeded the limit (1)

Did anyone have experimented the same problem?¿? Any hint on How to solved
it?¿? I have tried several times with clean installations and always
getting the same...

The host where I am trying to do the installation have CentOS 7...


Thanks for all in advance
Will be waiting for any hint to see what I am doing wrong...
Manuel Luis Aznar
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users